|
|
@@ -0,0 +1,162 @@
|
|
|
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
|
|
+
|
|
|
+#include "mt7621.dtsi"
|
|
|
+
|
|
|
+#include <dt-bindings/gpio/gpio.h>
|
|
|
+#include <dt-bindings/input/input.h>
|
|
|
+
|
|
|
+/ {
|
|
|
+ compatible = "raisecom,msg1500-x-00", "mediatek,mt7621-soc";
|
|
|
+ model = "RAISECOM MSG1500 X.00";
|
|
|
+
|
|
|
+ aliases {
|
|
|
+ led-boot = &led_usb;
|
|
|
+ led-failsafe = &led_usb;
|
|
|
+ led-upgrade = &led_usb;
|
|
|
+ };
|
|
|
+
|
|
|
+ leds {
|
|
|
+ compatible = "gpio-leds";
|
|
|
+
|
|
|
+ wlan2g {
|
|
|
+ label = "blue:wlan2g";
|
|
|
+ gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
|
|
|
+ linux,default-trigger = "phy0radio";
|
|
|
+ };
|
|
|
+
|
|
|
+ wlan5g {
|
|
|
+ label = "blue:wlan5g";
|
|
|
+ gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
|
|
|
+ linux,default-trigger = "phy1radio";
|
|
|
+ };
|
|
|
+
|
|
|
+ led_usb: usb {
|
|
|
+ label = "blue:usb";
|
|
|
+ gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
|
|
|
+ trigger-sources = <&ehci_port2>;
|
|
|
+ linux,default-trigger = "usbport";
|
|
|
+ };
|
|
|
+ };
|
|
|
+
|
|
|
+ keys {
|
|
|
+ compatible = "gpio-keys";
|
|
|
+
|
|
|
+ reset {
|
|
|
+ label = "reset";
|
|
|
+ gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
|
|
|
+ linux,code = <KEY_RESTART>;
|
|
|
+ };
|
|
|
+
|
|
|
+ wps {
|
|
|
+ label = "wps";
|
|
|
+ gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
|
|
|
+ linux,code = <KEY_WPS_BUTTON>;
|
|
|
+ };
|
|
|
+
|
|
|
+ wifi {
|
|
|
+ label = "wifi";
|
|
|
+ gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
|
|
|
+ linux,code = <KEY_RFKILL>;
|
|
|
+ };
|
|
|
+ };
|
|
|
+};
|
|
|
+
|
|
|
+&nand {
|
|
|
+ status = "okay";
|
|
|
+
|
|
|
+ partitions {
|
|
|
+ compatible = "fixed-partitions";
|
|
|
+ #address-cells = <1>;
|
|
|
+ #size-cells = <1>;
|
|
|
+
|
|
|
+ partition@0 {
|
|
|
+ label = "Bootloader";
|
|
|
+ reg = <0x0 0x80000>;
|
|
|
+ read-only;
|
|
|
+ };
|
|
|
+
|
|
|
+ partition@80000 {
|
|
|
+ label = "Config";
|
|
|
+ reg = <0x80000 0x80000>;
|
|
|
+ read-only;
|
|
|
+ };
|
|
|
+
|
|
|
+ factory: partition@100000 {
|
|
|
+ label = "Factory";
|
|
|
+ reg = <0x100000 0x40000>;
|
|
|
+ read-only;
|
|
|
+ };
|
|
|
+
|
|
|
+ partition@140000 {
|
|
|
+ label = "kernel";
|
|
|
+ reg = <0x140000 0x400000>;
|
|
|
+ };
|
|
|
+
|
|
|
+ partition@540000 {
|
|
|
+ label = "ubi";
|
|
|
+ reg = <0x540000 0x7a40000>;
|
|
|
+ };
|
|
|
+ };
|
|
|
+};
|
|
|
+
|
|
|
+&pcie {
|
|
|
+ status = "okay";
|
|
|
+};
|
|
|
+
|
|
|
+&pcie0 {
|
|
|
+ wifi@0,0 {
|
|
|
+ compatible = "mediatek,mt76";
|
|
|
+ reg = <0x0000 0 0 0 0>;
|
|
|
+ mediatek,mtd-eeprom = <&factory 0x0>;
|
|
|
+ /* 5 GHz (phy1) does not take the address from calibration data,
|
|
|
+ but setting it manually here works */
|
|
|
+ nvmem-cells = <&macaddr_factory_4>;
|
|
|
+ nvmem-cell-names = "mac-address";
|
|
|
+ };
|
|
|
+};
|
|
|
+
|
|
|
+&switch0 {
|
|
|
+ ports {
|
|
|
+ port@0 {
|
|
|
+ status = "okay";
|
|
|
+ label = "lan4";
|
|
|
+ };
|
|
|
+
|
|
|
+ port@1 {
|
|
|
+ status = "okay";
|
|
|
+ label = "lan3";
|
|
|
+ };
|
|
|
+
|
|
|
+ port@2 {
|
|
|
+ status = "okay";
|
|
|
+ label = "lan2";
|
|
|
+ };
|
|
|
+
|
|
|
+ port@3 {
|
|
|
+ status = "okay";
|
|
|
+ label = "lan1";
|
|
|
+ };
|
|
|
+
|
|
|
+ port@4 {
|
|
|
+ status = "okay";
|
|
|
+ label = "wan";
|
|
|
+ };
|
|
|
+ };
|
|
|
+};
|
|
|
+
|
|
|
+&state_default {
|
|
|
+ gpio {
|
|
|
+ groups = "i2c", "jtag", "uart3", "wdt";
|
|
|
+ function = "gpio";
|
|
|
+ };
|
|
|
+};
|
|
|
+
|
|
|
+&factory {
|
|
|
+ compatible = "nvmem-cells";
|
|
|
+ #address-cells = <1>;
|
|
|
+ #size-cells = <1>;
|
|
|
+
|
|
|
+ macaddr_factory_4: macaddr@4 {
|
|
|
+ reg = <0x4 0x6>;
|
|
|
+ };
|
|
|
+};
|
Liangkuan Yang