ramips: move status led unset to devicetree

Release the led used for boot status indication via devicetree instead
of setting a default off trigger in userspace.

Signed-off-by: Mathias Kresin <[email protected]>

target/linux/ramips/base-files/etc/board.d/01_leds

@@ -33,7 +33,6 @@ air3gii)
 	;;
 alfa-network,ac1200rm)
 	set_wifi_led "$boardname:green:wlan2g" "wlan1"
-	ucidef_set_led_default "wps" "wps" "$boardname:green:wps" "0"
 	;;
 alfa-network,awusfree1)
 	set_wifi_led "$boardname:blue:wlan"
@@ -78,9 +77,6 @@ cf-wr800n)
 	ucidef_set_led_netdev "lan" "lan" "$boardname:white:ethernet" eth0.1
 	set_wifi_led "$boardname:white:wifi"
 	;;
-cy-swr1100)
-	ucidef_set_led_default "wps" "WPS" "$boardname:blue:wps" "0"
-	;;
 d240)
 	set_wifi_led "$boardname:blue:wifi"
 	;;
@@ -117,12 +113,10 @@ dlink,dwr-118-a2)
 	ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x0e"
 	ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x01"
 	set_wifi_led "$boardname:green:wlan2g" "wlan1"
-	ucidef_set_led_default "internet" "internet" "$boardname:green:internet" "0"
 	;;
 dlink,dwr-921-c1)
 	set_wifi_led "$boardname:green:wifi"
 	ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x0f"
-	ucidef_set_led_default "sigstrength" "Signal Strength" "$boardname:green:sigstrength" "0"
 	;;
 dir-860l-b1)
 	ucidef_set_led_netdev "wan" "wan" "$boardname:green:net" "eth0.2"
@@ -139,7 +133,6 @@ ex3700)
 	ucidef_set_led_netdev "wlan2g" "DEVICE (green)" "$boardname:green:device" "wlan1"
 	;;
 f5d8235-v1)
-	ucidef_set_led_default "lan" "lan" "$boardname:blue:wired" "0"
 	set_wifi_led "$boardname:blue:wireless"
 	;;
 fonera20n)
@@ -407,16 +400,12 @@ y1s)
 	;;
 youhua,wr1200js)
 	ucidef_set_led_switch "internet" "INTERNET" "$boardname:green:wan" "switch0" "0x01"
-	ucidef_set_led_default "wps" "wps" "$boardname:blue:wps" "0"
 	;;
 zbt-ape522ii)
 	ucidef_set_led_netdev "wlan2g4" "wlan1-link" "$boardname:green:wlan2g4" "wlan1"
 	ucidef_set_led_netdev "sys1" "wlan1" "$boardname:green:sys1" "wlan1" "tx rx"
 	ucidef_set_led_netdev "sys2" "wlan0" "$boardname:green:sys2" "wlan0" "tx rx"
 	;;
-zbt-cpe102)
-	ucidef_set_led_default "power" "power" "$boardname:green:4g-0" "0"
-	;;
 zbt-wa05)
 	set_wifi_led "$boardname:blue:air"
 	;;

target/linux/ramips/dts/AC1200RM.dts

@@ -44,8 +44,6 @@
 	aliases {
 		led-boot = &led_wps;
 		led-failsafe = &led_wps;
-		led-running = &led_wps;
-		led-upgrade = &led_wps;
 	};
 
 	chosen {

target/linux/ramips/dts/CY-SWR1100.dts

@@ -12,8 +12,6 @@
 	aliases {
 		led-boot = &led_wps;
 		led-failsafe = &led_wps;
-		led-running = &led_wps;
-		led-upgrade = &led_wps;
 	};
 
 	nor-flash@1c000000 {

target/linux/ramips/dts/DWR-118-A2.dts

@@ -12,8 +12,6 @@
 	aliases {
 		led-boot = &led_internet;
 		led-failsafe = &led_internet;
-		led-running = &led_internet;
-		led-upgrade = &led_internet;
 	};
 
 	gpio-keys-polled {

target/linux/ramips/dts/DWR-921-C1.dts

@@ -12,8 +12,6 @@
 	aliases {
 		led-boot = &led_sstrenghg;
 		led-failsafe = &led_sstrenghg;
-		led-running = &led_sstrenghg;
-		led-upgrade = &led_sstrenghg;
 	};
 
 	gpio-keys-polled {

target/linux/ramips/dts/F5D8235_V1.dts

@@ -14,8 +14,6 @@
 	aliases {
 		led-boot = &led_wired_blue;
 		led-failsafe = &led_wired_blue;
-		led-running = &led_wired_blue;
-		led-upgrade = &led_wired_blue;
 	};
 
 	cfi@1f000000 {

target/linux/ramips/dts/WR1200JS.dts

@@ -12,8 +12,6 @@
 	aliases {
 		led-boot = &led_wps;
 		led-failsafe = &led_wps;
-		led-running = &led_wps;
-		led-upgrade = &led_wps;
 	};
 
 	memory@0 {

target/linux/ramips/dts/ZBT-CPE102.dts

@@ -17,8 +17,6 @@
 	aliases {
 		led-boot = &led_4g_0;
 		led-failsafe = &led_4g_0;
-		led-running = &led_4g_0;
-		led-upgrade = &led_4g_0;
 	};
 
 	gpio-leds {