ralink: add support for dalink dcs930l ipcam

Signed-off-by: John Crispin <[email protected]>

SVN-Revision: 38053

target/linux/ramips/base-files/etc/diag.sh

@@ -27,7 +27,7 @@ get_status_led() {
 	d105)
 		status_led="d105:red:power"
 		;;
-	dir-300-b1 | dir-600-b1 | dir-600-b2 | dir-610-a1 | dir-615-h1 | dir-615-d | dir-620-a1| dir-620-d1| dir-300-b7| dir-320-b1)
+	dcs-930 | dir-300-b1 | dir-600-b1 | dir-600-b2 | dir-610-a1 | dir-615-h1 | dir-615-d | dir-620-a1| dir-620-d1| dir-300-b7| dir-320-b1)
 		status_led="d-link:green:status"
 		;;
 	dir-645)

target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom

@@ -68,6 +68,7 @@ case "$FIRMWARE" in
 	br6524n | \
 	carambola | \
 	d105 | \
+	dcs-930 | \
 	dir-300-b7 | \
 	dir-320-b1 | \
 	dir-610-a1 | \

target/linux/ramips/base-files/etc/uci-defaults/02_network

@@ -43,6 +43,7 @@ ramips_setup_interfaces()
 	all5003 | \
 	awm002-evb | \
 	broadway | \
+	dcs-930| \
 	wnce2001)
 		ucidef_add_switch "switch0" "1" "0"
 		ucidef_set_interface_lan "eth0"

target/linux/ramips/base-files/lib/ramips.sh

@@ -64,6 +64,9 @@ ramips_board_detect() {
 	*"Aztech HW550-3G")
 		name="hw550-3g"
 		;;
+	*"DCS-930")
+		name="dcs-930"
+		;;
 	*"DIR-300 B1")
 		name="dir-300-b1"
 		;;

target/linux/ramips/base-files/lib/upgrade/platform.sh

@@ -29,6 +29,7 @@ platform_check_image() {
 	broadway | \
 	carambola | \
 	d105 | \
+	dcs-930 | \
 	dir-300-b1 | \
 	dir-300-b7 | \
 	dir-320-b1 | \

target/linux/ramips/dts/DCS-930.dts

@@ -0,0 +1,118 @@
+/dts-v1/;
+
+/include/ "rt3050.dtsi"
+
+/ {
+	compatible = "DCS-930", "ralink,rt3050-soc";
+	model = "D-Link DCS-930";
+
+	pinctrl {
+		state_default: pinctrl0 {
+			gpio {
+				ralink,group = "i2c", "spi", "jtag", "mdio", "rgmii", "uartf";
+				ralink,function = "gpio";
+			};
+		};
+	};
+
+	cfi@1f000000 {
+		compatible = "cfi-flash";
+		reg = <0x1f000000 0x400000>;
+
+		bank-width = <2>;
+		device-width = <2>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			label = "u-boot";
+			reg = <0x0 0x30000>;
+			read-only;
+		};
+
+		partition@30000 {
+			label = "u-boot-env";
+			reg = <0x30000 0x10000>;
+			read-only;
+		};
+
+		factory: partition@40000 {
+			label = "factory";
+			reg = <0x40000 0x10000>;
+			read-only;
+		};
+
+		partition@50000 {
+			label = "firmware";
+			reg = <0x50000 0x3b0000>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		wifi {
+			label = "d-link:red:alert";
+			gpios = <&gpio0 8 1>;
+		};
+		power {
+			label = "d-link:green:status";
+			gpios = <&gpio0 9 1>;
+		};
+		wps {
+			label = "d-link:blue:wps";
+			gpios = <&gpio0 13 1>;
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <20>;
+
+		wps {
+			label = "wps";
+			gpios = <&gpio0 0 1>;
+			linux,code = <0x101>;
+		};
+		reset {
+			label = "reset";
+			gpios = <&gpio0 10 1>;
+			linux,code = <0x198>;
+		};
+	};
+
+	esw@10110000 {
+		ralink,portmap = <0x2f>;
+
+		port@0 {
+			compatible = "swconfig,port";
+			swconfig,segment = "lan";
+			swconfig,portmap = <0 4>;
+		};
+		port@1 {
+			compatible = "swconfig,port";
+			swconfig,segment = "lan";
+			swconfig,portmap = <1 3>;
+		};
+		port@2 {
+			compatible = "swconfig,port";
+			swconfig,segment = "lan";
+			swconfig,portmap = <2 2>;
+		};
+		port@3 {
+			compatible = "swconfig,port";
+			swconfig,segment = "lan";
+			swconfig,portmap = <3 1>;
+		};
+		port@4 {
+			compatible = "swconfig,port";
+			swconfig,segment = "wan";
+			swconfig,portmap = <4 0>;
+		};
+	};
+
+	otg@101c0000 {
+		status = "okay";
+	};
+};

target/linux/ramips/image/Makefile

@@ -357,6 +357,8 @@ Image/Build/Profile/DAP1350=$(call BuildFirmware/dap1350/$(1),$(1),dap-1350,DAP-
 
 Image/Build/Profile/DAP1350WW=$(call BuildFirmware/dap1350/$(1),$(1),dap-1350WW,DAP-1350,RT3052-AP-DAP1350WW-3)
 
+Image/Build/Profile/DCS930=$(call BuildFirmware/Default4M/$(1),$(1),dcs-930,DCS-930)
+
 Image/Build/Profile/ESR-9753=$(call BuildFirmware/Default4M/$(1),$(1),esr-9753,ESR-9753)
 
 Image/Build/Profile/HW550-3G=$(call BuildFirmware/Default8M/$(1),$(1),hw550-3g,HW550-3G)
@@ -519,6 +521,7 @@ define Image/Build/Profile/Default
 	$(call Image/Build/Profile/DIR615H1,$(1))
 	$(call Image/Build/Profile/DAP1350,$(1))
 	$(call Image/Build/Profile/DAP1350WW,$(1))
+	$(call Image/Build/Profile/DCS930,$(1))
 	$(call Image/Build/Profile/ESR-9753,$(1))
 	$(call Image/Build/Profile/F7C027,$(1))
 	$(call Image/Build/Profile/F5D8235V2,$(1))

target/linux/ramips/rt305x/profiles/dlink.mk

@@ -18,6 +18,18 @@ endef
 
 $(eval $(call Profile,DIR615H1))
 
+define Profile/DCS930
+	NAME:=Dlink DCS-930
+        PACKAGES:=kmod-video-core kmod-video-uvc \
+		kmod-usb-core kmod-usb-rt305x-dwc_otg
+endef
+
+define Profile/DCS930/Description
+	Package set for Dlink DCS-930 board
+endef
+
+$(eval $(call Profile,DCS930))
+
 define Profile/DIR610A1
 	NAME:=Dlink DIR-610 A1
 	PACKAGES:=kmod-ledtrig-netdev kmod-ledtrig-timer