uboot-envtools: update kirkwood scripts

Also, scripts can be installed as data so let's change that here too.

Signed-off-by: Luka Perkov <[email protected]>

SVN-Revision: 38403

package/boot/uboot-envtools/Makefile

@@ -10,7 +10,7 @@ include $(TOPDIR)/rules.mk
 PKG_NAME:=uboot-envtools
 PKG_DISTNAME:=u-boot
 PKG_VERSION:=2013.07
-PKG_RELEASE:=1
+PKG_RELEASE:=2
 
 PKG_SOURCE:=$(PKG_DISTNAME)-$(PKG_VERSION).tar.bz2
 PKG_SOURCE_URL:=ftp://ftp.denx.de/pub/u-boot
@@ -55,27 +55,27 @@ define Package/uboot-envtools/install
 	$(INSTALL_DATA) ./files/uboot-envtools.sh $(1)/lib
 ifneq ($(CONFIG_TARGET_ar71xx),)
 	$(INSTALL_DIR) $(1)/etc/uci-defaults
-	$(INSTALL_BIN) ./files/ar71xx $(1)/etc/uci-defaults/30_uboot-envtools
+	$(INSTALL_DATA) ./files/ar71xx $(1)/etc/uci-defaults/30_uboot-envtools
 endif
 ifneq ($(CONFIG_TARGET_cns3xxx),)
 	$(INSTALL_DIR) $(1)/etc/uci-defaults
-	$(INSTALL_BIN) ./files/cns3xxx $(1)/etc/uci-defaults/30_uboot-envtools
+	$(INSTALL_DATA) ./files/cns3xxx $(1)/etc/uci-defaults/30_uboot-envtools
 endif
 ifneq ($(CONFIG_TARGET_imx6),)
 	$(INSTALL_DIR) $(1)/etc/uci-defaults
-	$(INSTALL_BIN) ./files/imx6 $(1)/etc/uci-defaults/30_uboot-envtools
+	$(INSTALL_DATA) ./files/imx6 $(1)/etc/uci-defaults/30_uboot-envtools
 endif
 ifneq ($(CONFIG_TARGET_kirkwood),)
 	$(INSTALL_DIR) $(1)/etc/uci-defaults
-	$(INSTALL_BIN) ./files/kirkwood $(1)/etc/uci-defaults/30_uboot-envtools
+	$(INSTALL_DATA) ./files/kirkwood $(1)/etc/uci-defaults/30_uboot-envtools
 endif
 ifneq ($(CONFIG_TARGET_lantiq),)
 	$(INSTALL_DIR) $(1)/etc/uci-defaults
-	$(INSTALL_BIN) ./files/lantiq $(1)/etc/uci-defaults/30_uboot-envtools
+	$(INSTALL_DATA) ./files/lantiq $(1)/etc/uci-defaults/30_uboot-envtools
 endif
 ifneq ($(CONFIG_TARGET_ramips),)
 	$(INSTALL_DIR) $(1)/etc/uci-defaults
-	$(INSTALL_BIN) ./files/ramips $(1)/etc/uci-defaults/30_uboot-envtools
+	$(INSTALL_DATA) ./files/ramips $(1)/etc/uci-defaults/30_uboot-envtools
 endif
 endef
 

package/boot/uboot-envtools/files/kirkwood

@@ -1,20 +1,17 @@
 #!/bin/sh
 #
-# Copyright (C) 2012 OpenWrt.org
+# Copyright (C) 2012-2013 OpenWrt.org
 #
 
 [ -e /etc/config/ubootenv ] && exit 0
 
 touch /etc/config/ubootenv
 
-. /lib/kirkwood.sh
 . /lib/uboot-envtools.sh
 . /lib/functions.sh
 
-hardware=$(kirkwood_hardware_name)
-
-case "$hardware" in
-"RaidSonic ICY BOX IB-NAS6210")
+case "`cat /proc/device-tree/model`" in
+"RaidSonic ICY BOX IB-NAS62x0 (Rev B)")
 	ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x20000" "0x20000"
 	;;
 esac