brcm2708: update to latest patches from RPi Foundation

Also removes reverted patches.

Signed-off-by: Álvaro Fernández Rojas <[email protected]>

target/linux/brcm2708/bcm2711/config-4.19

@@ -102,13 +102,14 @@ CONFIG_ARM_AMBA=y
 CONFIG_ARM_ARCH_TIMER=y
 CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y
 CONFIG_ARM_ARCH_TIMER_OOL_WORKAROUND=y
-CONFIG_ARM_BCM2835_CPUFREQ=y
+# CONFIG_ARM_BCM2835_CPUFREQ is not set
 CONFIG_ARM_GIC=y
 CONFIG_ARM_GIC_V2M=y
 CONFIG_ARM_GIC_V3=y
 CONFIG_ARM_GIC_V3_ITS=y
 CONFIG_ARM_GIC_V3_ITS_PCI=y
 CONFIG_ARM_PSCI_FW=y
+CONFIG_ARM_RASPBERRYPI_CPUFREQ=y
 # CONFIG_ARM_SCMI_PROTOCOL is not set
 # CONFIG_ARM_SP805_WATCHDOG is not set
 CONFIG_ARM_TIMER_SP804=y
@@ -148,6 +149,7 @@ CONFIG_CAVIUM_ERRATUM_23154=y
 CONFIG_CAVIUM_ERRATUM_27456=y
 CONFIG_CLKDEV_LOOKUP=y
 CONFIG_CLKSRC_MMIO=y
+CONFIG_CLK_RASPBERRYPI=y
 CONFIG_CLONE_BACKWARDS=y
 CONFIG_CMA=y
 CONFIG_CMA_ALIGNMENT=8
@@ -163,7 +165,8 @@ CONFIG_COMMON_CLK=y
 CONFIG_COMMON_CLK_XGENE=y
 CONFIG_CONFIGFS_FS=y
 CONFIG_CONSOLE_TRANSLATIONS=y
-# CONFIG_CPUFREQ_DT is not set
+CONFIG_CPUFREQ_DT=y
+CONFIG_CPUFREQ_DT_PLATDEV=y
 # CONFIG_CPU_BIG_ENDIAN is not set
 CONFIG_CPU_FREQ=y
 CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
@@ -253,6 +256,7 @@ CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
 CONFIG_GENERIC_CPU_AUTOPROBE=y
+CONFIG_GENERIC_CPU_VULNERABILITIES=y
 CONFIG_GENERIC_CSUM=y
 CONFIG_GENERIC_EARLY_IOREMAP=y
 CONFIG_GENERIC_IDLE_POLL_SETUP=y
@@ -461,6 +465,7 @@ CONFIG_PM_CLK=y
 CONFIG_PM_GENERIC_DOMAINS=y
 CONFIG_PM_GENERIC_DOMAINS_OF=y
 CONFIG_PM_GENERIC_DOMAINS_SLEEP=y
+CONFIG_PM_OPP=y
 CONFIG_PM_SLEEP=y
 CONFIG_PM_SLEEP_SMP=y
 CONFIG_POWER_RESET=y

target/linux/brcm2708/patches-4.19/950-0010-spidev-Add-spidev-compatible-string-to-silence-warni.patch

@@ -1,21 +0,0 @@
-From e21d0b86f4a9c2c1f61e183e5dfcc1cf37058ca1 Mon Sep 17 00:00:00 2001
-From: Phil Elwell <[email protected]>
-Date: Tue, 14 Jul 2015 10:26:09 +0100
-Subject: [PATCH] spidev: Add "spidev" compatible string to silence
- warning
-
-See: https://github.com/raspberrypi/linux/issues/1054
----
- drivers/spi/spidev.c | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/drivers/spi/spidev.c
-+++ b/drivers/spi/spidev.c
-@@ -670,6 +670,7 @@ static const struct of_device_id spidev_
- 	{ .compatible = "ge,achc" },
- 	{ .compatible = "semtech,sx1301" },
- 	{ .compatible = "siliconlabs,si3210" },
-+	{ .compatible = "spidev" },
- 	{},
- };
- MODULE_DEVICE_TABLE(of, spidev_dt_ids);

target/linux/brcm2708/patches-4.19/950-0085-ASoC-wm8804-MCLK-configuration-options-32-bit.patch

@@ -1,32 +0,0 @@
-From f77d4bf8ea9217d57be6982a6fdfa9f5f9c9b927 Mon Sep 17 00:00:00 2001
-From: Daniel Matuschek <[email protected]>
-Date: Wed, 15 Jan 2014 21:41:23 +0100
-Subject: [PATCH] ASoC: wm8804: MCLK configuration options, 32-bit
-
-WM8804 can run with PLL frequencies of 256xfs and 128xfs for most sample
-rates. At 192kHz only 128xfs is supported. The existing driver selects
-128xfs automatically for some lower samples rates. By using an
-additional mclk_div divider, it is now possible to control the
-behaviour. This allows using 256xfs PLL frequency on all sample rates up
-to 96kHz. It should allow lower jitter and better signal quality. The
-behavior has to be controlled by the sound card driver, because some
-sample frequency share the same setting. e.g. 192kHz and 96kHz use
-24.576MHz master clock. The only difference is the MCLK divider.
-
-This also added support for 32bit data.
-
-Signed-off-by: Daniel Matuschek <[email protected]>
----
- sound/soc/codecs/wm8804.c | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/sound/soc/codecs/wm8804.c
-+++ b/sound/soc/codecs/wm8804.c
-@@ -550,6 +550,7 @@ static const struct snd_soc_component_dr
- 	.use_pmdown_time	= 1,
- 	.endianness		= 1,
- 	.non_legacy_dai_naming	= 1,
-+	.idle_bias_on		= true,
- };
- 
- const struct regmap_config wm8804_regmap_config = {

target/linux/brcm2708/patches-4.19/950-0102-cgroup-Disable-cgroup-memory-by-default.patch

@@ -1,70 +0,0 @@
-From 7ae6ba03434344f90403936ae79bfd7ba005b49c Mon Sep 17 00:00:00 2001
-From: Phil Elwell <[email protected]>
-Date: Mon, 27 Nov 2017 17:14:54 +0000
-Subject: [PATCH] cgroup: Disable cgroup "memory" by default
-
-Some Raspberry Pis have limited RAM and most users won't use the
-cgroup memory support so it is disabled by default. Enable with:
-
-    cgroup_enable=memory
-
-See: https://github.com/raspberrypi/linux/issues/1950
-
-Signed-off-by: Phil Elwell <[email protected]>
----
- kernel/cgroup/cgroup.c | 30 ++++++++++++++++++++++++++++++
- 1 file changed, 30 insertions(+)
-
---- a/kernel/cgroup/cgroup.c
-+++ b/kernel/cgroup/cgroup.c
-@@ -5334,6 +5334,8 @@ int __init cgroup_init_early(void)
- }
- 
- static u16 cgroup_disable_mask __initdata;
-+static u16 cgroup_enable_mask __initdata;
-+static int __init cgroup_disable(char *str);
- 
- /**
-  * cgroup_init - cgroup initialization
-@@ -5374,6 +5376,12 @@ int __init cgroup_init(void)
- 
- 	mutex_unlock(&cgroup_mutex);
- 
-+	/* Apply an implicit disable... */
-+	cgroup_disable("memory");
-+
-+	/* ...knowing that an explicit enable will override it. */
-+	cgroup_disable_mask &= ~cgroup_enable_mask;
-+
- 	for_each_subsys(ss, ssid) {
- 		if (ss->early_init) {
- 			struct cgroup_subsys_state *css =
-@@ -5765,6 +5773,28 @@ static int __init cgroup_disable(char *s
- }
- __setup("cgroup_disable=", cgroup_disable);
- 
-+static int __init cgroup_enable(char *str)
-+{
-+	struct cgroup_subsys *ss;
-+	char *token;
-+	int i;
-+
-+	while ((token = strsep(&str, ",")) != NULL) {
-+		if (!*token)
-+			continue;
-+
-+		for_each_subsys(ss, i) {
-+			if (strcmp(token, ss->name) &&
-+			    strcmp(token, ss->legacy_name))
-+				continue;
-+
-+			cgroup_enable_mask |= 1 << i;
-+		}
-+	}
-+	return 1;
-+}
-+__setup("cgroup_enable=", cgroup_enable);
-+
- /**
-  * css_tryget_online_from_dir - get corresponding css from a cgroup dentry
-  * @dentry: directory dentry of interest