refresh patches

SVN-Revision: 30777

target/linux/generic/patches-2.6.32/066-block2mtd_probe.patch

@@ -1,6 +1,6 @@
 --- a/drivers/mtd/devices/block2mtd.c
 +++ b/drivers/mtd/devices/block2mtd.c
-@@ -264,10 +264,12 @@ static int _open_bdev(struct block2mtd_d
+@@ -264,11 +264,13 @@ static int _open_bdev(struct block2mtd_d
  	bdev = open_bdev_exclusive(dev->devname, FMODE_READ|FMODE_WRITE, NULL);
  #ifndef MODULE
  	if (IS_ERR(bdev)) {
@@ -9,8 +9,9 @@
  		/* We might not have rootfs mounted at this point. Try
  		   to resolve the device name by other means. */
  
-+		wait_for_device_probe();
 -		dev_t devt = name_to_dev_t(dev->devname);
++		wait_for_device_probe();
 +		devt = name_to_dev_t(dev->devname);
  		if (devt) {
  			bdev = open_by_devnum(devt, FMODE_WRITE | FMODE_READ);
+ 		}

target/linux/generic/patches-2.6.32/660-phy_mvswitch.patch

@@ -1,8 +1,8 @@
 --- a/drivers/net/phy/Kconfig
 +++ b/drivers/net/phy/Kconfig
-@@ -99,6 +99,9 @@ config ADM6996_PHY
- 	---help---
- 	  Currently supports the ADM6996F switch
+@@ -101,6 +101,9 @@ config ADM6996_PHY
+ 	  Currently supports the ADM6996FC and ADM6996M switches.
+ 	  Support for FC is very limited.
  
 +config MVSWITCH_PHY
 +	tristate "Driver for Marvell 88E6060 switches"

target/linux/generic/patches-2.6.32/670-phy_ip175c.patch

@@ -1,6 +1,6 @@
 --- a/drivers/net/phy/Kconfig
 +++ b/drivers/net/phy/Kconfig
-@@ -102,6 +102,10 @@ config ADM6996_PHY
+@@ -104,6 +104,10 @@ config ADM6996_PHY
  config MVSWITCH_PHY
  	tristate "Driver for Marvell 88E6060 switches"
  

target/linux/generic/patches-2.6.32/680-phy_ar8216.patch

@@ -1,6 +1,6 @@
 --- a/drivers/net/phy/Kconfig
 +++ b/drivers/net/phy/Kconfig
-@@ -106,6 +106,10 @@ config IP17XX_PHY
+@@ -108,6 +108,10 @@ config IP17XX_PHY
  	tristate "Driver for IC+ IP17xx switches"
  	select SWCONFIG
  

target/linux/generic/patches-2.6.32/690-phy_rtl8306.patch

@@ -1,6 +1,6 @@
 --- a/drivers/net/phy/Kconfig
 +++ b/drivers/net/phy/Kconfig
-@@ -110,6 +110,10 @@ config AR8216_PHY
+@@ -112,6 +112,10 @@ config AR8216_PHY
  	tristate "Driver for Atheros AR8216 switches"
  	select SWCONFIG
  

target/linux/generic/patches-2.6.32/691-phy_rtl8366.patch

@@ -1,6 +1,6 @@
 --- a/drivers/net/phy/Kconfig
 +++ b/drivers/net/phy/Kconfig
-@@ -141,4 +141,29 @@ config MDIO_GPIO
+@@ -143,4 +143,29 @@ config MDIO_GPIO
  	  To compile this driver as a module, choose M here: the module
  	  will be called mdio-gpio.
  

target/linux/generic/patches-2.6.32/975-ssb_update.patch

@@ -206,7 +206,7 @@
  	u32 pmucap;
  
  	if (!(cc->capabilities & SSB_CHIPCO_CAP_PMU))
-@@ -509,15 +518,12 @@ void ssb_pmu_init(struct ssb_chipcommon 
+@@ -509,15 +518,12 @@ void ssb_pmu_init(struct ssb_chipcommon
  	ssb_dprintk(KERN_DEBUG PFX "Found rev %u PMU (capabilities 0x%08X)\n",
  		    cc->pmu.rev, pmucap);
  
@@ -1468,7 +1468,7 @@
  	/* TODO - get remaining rev 8 stuff needed */
  }
  
-@@ -572,37 +682,34 @@ static int sprom_extract(struct ssb_bus 
+@@ -572,37 +682,34 @@ static int sprom_extract(struct ssb_bus
  	ssb_dprintk(KERN_DEBUG PFX "SPROM revision %d detected.\n", out->revision);
  	memset(out->et0mac, 0xFF, 6);		/* preset et0 and et1 mac */
  	memset(out->et1mac, 0xFF, 6);
@@ -1527,7 +1527,7 @@
  	}
  
  	if (out->boardflags_lo == 0xFFFF)
-@@ -616,15 +723,14 @@ static int sprom_extract(struct ssb_bus 
+@@ -616,15 +723,14 @@ static int sprom_extract(struct ssb_bus
  static int ssb_pci_sprom_get(struct ssb_bus *bus,
  			     struct ssb_sprom *sprom)
  {
@@ -2309,7 +2309,7 @@
  
  /* Suspend a SSB bus.
   * Call this from the parent bus suspend routine. */
-@@ -667,6 +695,7 @@ extern int ssb_bus_may_powerdown(struct 
+@@ -667,6 +695,7 @@ extern int ssb_bus_may_powerdown(struct
   * Otherwise static always-on powercontrol will be used. */
  extern int ssb_bus_powerup(struct ssb_bus *bus, bool dynamic_pctl);