refresh patches

SVN-Revision: 16156

target/linux/ar7/patches-2.6.27/100-board_support.patch

@@ -1,6 +1,6 @@
 --- a/arch/mips/Kconfig
 +++ b/arch/mips/Kconfig
-@@ -18,6 +18,24 @@ choice
+@@ -19,6 +19,24 @@ choice
  	prompt "System type"
  	default SGI_IP22
  
@@ -27,7 +27,7 @@
  
 --- a/arch/mips/kernel/traps.c
 +++ b/arch/mips/kernel/traps.c
-@@ -1188,9 +1188,22 @@ void *set_except_vector(int n, void *add
+@@ -1203,9 +1203,22 @@ void *set_except_vector(int n, void *add
  
  	exception_handlers[n] = handler;
  	if (n == 0 && cpu_has_divec) {

target/linux/ar7/patches-2.6.27/110-flash.patch

@@ -1,6 +1,6 @@
 --- a/drivers/mtd/Kconfig
 +++ b/drivers/mtd/Kconfig
-@@ -190,6 +190,12 @@ config MTD_MYLOADER_PARTS
+@@ -188,6 +188,12 @@ config MTD_MYLOADER_PARTS
  	  You will still need the parsing functions to be called by the driver
  	  for your particular device. It won't happen automatically.
  
@@ -15,7 +15,7 @@
  config MTD_CHAR
 --- a/drivers/mtd/maps/physmap.c
 +++ b/drivers/mtd/maps/physmap.c
-@@ -87,7 +87,7 @@ static int physmap_flash_remove(struct p
+@@ -85,7 +85,7 @@ static int physmap_flash_remove(struct p
  
  static const char *rom_probe_types[] = { "cfi_probe", "jedec_probe", "map_rom", NULL };
  #ifdef CONFIG_MTD_PARTITIONS

target/linux/ar7/patches-2.6.27/120-gpio_chrdev.patch

@@ -1,6 +1,6 @@
 --- a/drivers/char/Kconfig
 +++ b/drivers/char/Kconfig
-@@ -960,6 +960,15 @@ config MWAVE
+@@ -968,6 +968,15 @@ config MWAVE
  	  To compile this driver as a module, choose M here: the
  	  module will be called mwave.
  
@@ -18,7 +18,7 @@
  	depends on SCx200
 --- a/drivers/char/Makefile
 +++ b/drivers/char/Makefile
-@@ -91,6 +91,7 @@ obj-$(CONFIG_COBALT_LCD)	+= lcd.o
+@@ -90,6 +90,7 @@ obj-$(CONFIG_HW_RANDOM)		+= hw_random/
  obj-$(CONFIG_PPDEV)		+= ppdev.o
  obj-$(CONFIG_NWBUTTON)		+= nwbutton.o
  obj-$(CONFIG_NWFLASH)		+= nwflash.o

target/linux/ar7/patches-2.6.27/130-vlynq.patch

@@ -10,10 +10,11 @@
  endmenu
 --- a/drivers/Makefile
 +++ b/drivers/Makefile
-@@ -92,5 +92,6 @@ obj-$(CONFIG_DCA)		+= dca/
+@@ -96,6 +96,7 @@ obj-$(CONFIG_DCA)		+= dca/
  obj-$(CONFIG_HID)		+= hid/
  obj-$(CONFIG_PPC_PS3)		+= ps3/
  obj-$(CONFIG_OF)		+= of/
 +obj-$(CONFIG_VLYNQ)		+= vlynq/
  obj-$(CONFIG_SSB)		+= ssb/
  obj-$(CONFIG_VIRTIO)		+= virtio/
+ obj-$(CONFIG_REGULATOR)		+= regulator/

target/linux/ar7/patches-2.6.27/150-cpmac_not_broken.patch

@@ -1,6 +1,6 @@
 --- a/drivers/net/Kconfig
 +++ b/drivers/net/Kconfig
-@@ -1867,7 +1867,7 @@ config SC92031
+@@ -1823,7 +1823,7 @@ config SC92031
  
  config CPMAC
  	tristate "TI AR7 CPMAC Ethernet support (EXPERIMENTAL)"

target/linux/ar7/patches-2.6.27/500-serial_kludge.patch

@@ -1,6 +1,6 @@
 --- a/drivers/serial/8250.c
 +++ b/drivers/serial/8250.c
-@@ -266,6 +266,13 @@ static const struct serial8250_config ua
+@@ -264,6 +264,13 @@ static const struct serial8250_config ua
  		.fcr		= UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
  		.flags		= UART_CAP_FIFO,
  	},
@@ -14,7 +14,7 @@
  };
  
  #if defined (CONFIG_SERIAL_8250_AU1X00)
-@@ -2524,7 +2531,11 @@ static void serial8250_console_putchar(s
+@@ -2552,7 +2559,11 @@ static void serial8250_console_putchar(s
  {
  	struct uart_8250_port *up = (struct uart_8250_port *)port;
  

target/linux/ar7/patches-2.6.27/900-cpmac_multiqueue.patch

@@ -19,7 +19,7 @@ because other drivers do it in the same way.
 
 --- a/drivers/net/cpmac.c
 +++ b/drivers/net/cpmac.c
-@@ -621,13 +621,13 @@
+@@ -621,13 +621,13 @@ static void cpmac_end_xmit(struct net_de
  
  		dev_kfree_skb_irq(desc->skb);
  		desc->skb = NULL;
@@ -35,7 +35,7 @@ because other drivers do it in the same way.
  			netif_wake_subqueue(dev, queue);
  	}
  }
-@@ -737,7 +737,6 @@
+@@ -737,7 +737,6 @@ static void cpmac_clear_tx(struct net_de
  
  static void cpmac_hw_error(struct work_struct *work)
  {
@@ -43,7 +43,7 @@ because other drivers do it in the same way.
  	struct cpmac_priv *priv =
  		container_of(work, struct cpmac_priv, reset_work);
  
-@@ -824,7 +823,6 @@
+@@ -824,7 +823,6 @@ static irqreturn_t cpmac_irq(int irq, vo
  
  static void cpmac_tx_timeout(struct net_device *dev)
  {
@@ -51,7 +51,7 @@ because other drivers do it in the same way.
  	struct cpmac_priv *priv = netdev_priv(dev);
  
  	spin_lock(&priv->lock);
-@@ -1103,7 +1101,7 @@
+@@ -1103,7 +1101,7 @@ static int external_switch;
  
  static int __devinit cpmac_probe(struct platform_device *pdev)
  {
@@ -60,7 +60,7 @@ because other drivers do it in the same way.
  	char *mdio_bus_id = "0";
  	struct resource *mem;
  	struct cpmac_priv *priv;
-@@ -1132,6 +1130,7 @@
+@@ -1132,6 +1130,7 @@ static int __devinit cpmac_probe(struct 
  	}
  
  	dev = alloc_etherdev_mq(sizeof(*priv), CPMAC_QUEUES);

target/linux/generic-2.6/patches-2.6.27/801-usb_serial_endpoint_size.patch

@@ -8,7 +8,7 @@
  static int debug;
  /* initially all NULL */
  static struct usb_serial *serial_table[SERIAL_TTY_MINORS];
-@@ -856,7 +857,7 @@ int usb_serial_probe(struct usb_interfac
+@@ -835,7 +836,7 @@ int usb_serial_probe(struct usb_interfac
  			dev_err(&interface->dev, "No free urbs available\n");
  			goto probe_error;
  		}
@@ -17,7 +17,7 @@
  		port->bulk_in_size = buffer_size;
  		port->bulk_in_endpointAddress = endpoint->bEndpointAddress;
  		port->bulk_in_buffer = kmalloc(buffer_size, GFP_KERNEL);
-@@ -1292,3 +1293,5 @@ MODULE_LICENSE("GPL");
+@@ -1255,3 +1256,5 @@ MODULE_LICENSE("GPL");
  
  module_param(debug, bool, S_IRUGO | S_IWUSR);
  MODULE_PARM_DESC(debug, "Debug enabled or not");