ramips: use generic board detection for D-Link DAP-1522 A1

Use the generic board detection for the D-Link DAP-1522 A1 instead of the
target specific one as all recent additions are doing.

Signed-off-by: Mathias Kresin <[email protected]>

target/linux/ramips/base-files/etc/board.d/02_network

@@ -242,7 +242,7 @@ ramips_setup_interfaces()
 		;;
 	cs-qr10|\
 	d105|\
-	dap-1522-a1|\
+	dlink,dap-1522-a1|\
 	dch-m225|\
 	ex2700|\
 	ex3700|\

target/linux/ramips/base-files/etc/diag.sh

@@ -147,7 +147,7 @@ get_status_led() {
 	youku-yk1)
 		status_led="$boardname:blue:power"
 		;;
-	dap-1522-a1|\
+	dlink,dap-1522-a1|\
 	k2p|\
 	m3|\
 	mir3g|\

target/linux/ramips/base-files/etc/uci-defaults/09_fix-checksum

@@ -20,7 +20,7 @@ dir-645 | \
 dir-860l-b1)
 	fix_checksum seama
 	;;
-dap-1522-a1)
+dlink,dap-1522-a1)
 	fix_checksum wrg
 	;;
 esac

target/linux/ramips/base-files/lib/ramips.sh

@@ -112,9 +112,6 @@ ramips_board_detect() {
 	*"DAP-1350")
 		name="dap-1350"
 		;;
-	*"DAP-1522 A1")
-		name="dap-1522-a1"
-		;;
 	*"DB-WRT01")
 		name="db-wrt01"
 		;;

target/linux/ramips/image/rt288x.mk

@@ -30,7 +30,7 @@ define Device/ar725w
 endef
 TARGET_DEVICES += ar725w
 
-define Device/dap-1522-a1
+define Device/dlink_dap-1522-a1
   DTS := DAP-1522-A1
   BLOCKSIZE := 64k
   IMAGE_SIZE := 3801088
@@ -44,7 +44,7 @@ define Device/dap-1522-a1
 	wrg-header wapnd01_dlink_dap1522 | \
 	check-size $$$$(IMAGE_SIZE)
 endef
-TARGET_DEVICES += dap-1522-a1
+TARGET_DEVICES += dlink_dap-1522-a1
 
 define Device/f5d8235-v1
   IMAGE_SIZE := 7744k