apm821xx: attempt to fix sata access freezes

The original vendor's driver programmed the dma controller's
AHB HPROT values to enable bufferable, privileged mode. This
along with the "same priorty for both channels" could very
well fix the freezes that have been reported on the forum by
@ticerex and @takimata.

<https://forum.lede-project.org/t/wd-mybook-live-duo-two-disks/16195/46>
Signed-off-by: Christian Lamparter <[email protected]>

target/linux/apm821xx/patches-4.14/302-dw-dma-hprot-fix-and-equal-priortiy.patch

@@ -0,0 +1,25 @@
+--- a/drivers/dma/dw/core.c
++++ b/drivers/dma/dw/core.c
+@@ -167,6 +167,8 @@ static void dwc_initialize_chan_dw(struc
+ 	cfghi |= DWC_CFGH_DST_PER(dwc->dws.dst_id);
+ 	cfghi |= DWC_CFGH_SRC_PER(dwc->dws.src_id);
+ 
++	cfghi |= DWC_CFGH_PROTCTL(3); /* bufferable + privileged access */
++
+ 	/* Set polarity of handshake interface */
+ 	cfglo |= hs_polarity ? DWC_CFGL_HS_DST_POL | DWC_CFGL_HS_SRC_POL : 0;
+ 
+@@ -1293,11 +1295,8 @@ int dw_dma_probe(struct dw_dma_chip *chi
+ 		else
+ 			list_add(&dwc->chan.device_node, &dw->dma.channels);
+ 
+-		/* 7 is highest priority & 0 is lowest. */
+-		if (pdata->chan_priority == CHAN_PRIORITY_ASCENDING)
+-			dwc->priority = pdata->nr_channels - i - 1;
+-		else
+-			dwc->priority = i;
++		/* set all channels to the same priority */
++		dwc->priority = pdata->nr_channels - 1;
+ 
+ 		dwc->ch_regs = &__dw_regs(dw)->CHAN[i];
+ 		spin_lock_init(&dwc->lock);