bcm4908: fix b53 regression regarding RGMII reg(s)

This fixes:
[   35.308550] WARNING: CPU: 0 PID: 230 at bcm_sf2_reg_rgmii_cntrl.isra.0+0x84/0x90

Signed-off-by: Rafał Miłecki <[email protected]>

target/linux/bcm4908/patches-5.10/075-v5.13-0006-net-dsa-bcm_sf2-Fix-bcm_sf2_reg_rgmii_cntrl-call-for.patch

@@ -0,0 +1,46 @@
+From fc516d3a6aa2c6ffe27d0da8818d13839e023e7e Mon Sep 17 00:00:00 2001
+From: Florian Fainelli <[email protected]>
+Date: Fri, 21 May 2021 10:46:14 -0700
+Subject: [PATCH] net: dsa: bcm_sf2: Fix bcm_sf2_reg_rgmii_cntrl() call for
+ non-RGMII port
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+We cannot call bcm_sf2_reg_rgmii_cntrl() for a port that is not RGMII,
+yet we do that in bcm_sf2_sw_mac_link_up() irrespective of the port's
+interface. Move that read until we have properly qualified the PHY
+interface mode. This avoids triggering a warning on 7278 platforms that
+have GMII ports.
+
+Fixes: 55cfeb396965 ("net: dsa: bcm_sf2: add function finding RGMII register")
+Signed-off-by: Florian Fainelli <[email protected]>
+Acked-by: Rafał Miłecki <[email protected]>
+Signed-off-by: David S. Miller <[email protected]>
+---
+ drivers/net/dsa/bcm_sf2.c | 5 ++---
+ 1 file changed, 2 insertions(+), 3 deletions(-)
+
+--- a/drivers/net/dsa/bcm_sf2.c
++++ b/drivers/net/dsa/bcm_sf2.c
+@@ -821,11 +821,9 @@ static void bcm_sf2_sw_mac_link_up(struc
+ 	bcm_sf2_sw_mac_link_set(ds, port, interface, true);
+ 
+ 	if (port != core_readl(priv, CORE_IMP0_PRT_ID)) {
+-		u32 reg_rgmii_ctrl;
++		u32 reg_rgmii_ctrl = 0;
+ 		u32 reg, offset;
+ 
+-		reg_rgmii_ctrl = bcm_sf2_reg_rgmii_cntrl(priv, port);
+-
+ 		if (priv->type == BCM4908_DEVICE_ID ||
+ 		    priv->type == BCM7445_DEVICE_ID)
+ 			offset = CORE_STS_OVERRIDE_GMIIP_PORT(port);
+@@ -836,6 +834,7 @@ static void bcm_sf2_sw_mac_link_up(struc
+ 		    interface == PHY_INTERFACE_MODE_RGMII_TXID ||
+ 		    interface == PHY_INTERFACE_MODE_MII ||
+ 		    interface == PHY_INTERFACE_MODE_REVMII) {
++			reg_rgmii_ctrl = bcm_sf2_reg_rgmii_cntrl(priv, port);
+ 			reg = reg_readl(priv, reg_rgmii_ctrl);
+ 			reg &= ~(RX_PAUSE_EN | TX_PAUSE_EN);
+ 

target/linux/bcm4908/patches-5.10/700-net-dsa-bcm_sf2-enable-GPHY-for-switch-probing.patch

@@ -29,7 +29,7 @@ Signed-off-by: Rafał Miłecki <[email protected]>
 
 --- a/drivers/net/dsa/bcm_sf2.c
 +++ b/drivers/net/dsa/bcm_sf2.c
-@@ -1488,10 +1488,14 @@ static int bcm_sf2_sw_probe(struct platf
+@@ -1487,10 +1487,14 @@ static int bcm_sf2_sw_probe(struct platf
  	rev = reg_readl(priv, REG_PHY_REVISION);
  	priv->hw_params.gphy_rev = rev & PHY_REVISION_MASK;
  

target/linux/bcm4908/patches-5.10/701-net-dsa-bcm_sf2-keep-GPHY-enabled-on-the-BCM4908.patch

@@ -15,7 +15,7 @@ Signed-off-by: Rafał Miłecki <[email protected]>
 
 --- a/drivers/net/dsa/bcm_sf2.c
 +++ b/drivers/net/dsa/bcm_sf2.c
-@@ -1502,6 +1502,12 @@ static int bcm_sf2_sw_probe(struct platf
+@@ -1501,6 +1501,12 @@ static int bcm_sf2_sw_probe(struct platf
  		 priv->hw_params.core_rev >> 8, priv->hw_params.core_rev & 0xff,
  		 priv->irq0, priv->irq1);