treewide: perst-gpio to perst-gpios

The former is deprecated. Fixes dtc warning.

Signed-off-by: Rosen Penev <[email protected]>
Link: https://github.com/openwrt/openwrt/pull/20116
Signed-off-by: Robert Marko <[email protected]>

target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4019-a62.dts

@@ -210,7 +210,7 @@
 
 &pcie0 {
 	status = "okay";
-	perst-gpio = <&tlmm 38 GPIO_ACTIVE_LOW>;
+	perst-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
 	wake-gpio = <&tlmm 50 GPIO_ACTIVE_LOW>;
 };
 

target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4019-eap2200.dts

@@ -201,7 +201,7 @@
 
 &pcie0 {
 	status = "okay";
-	perst-gpio = <&tlmm 38 GPIO_ACTIVE_LOW>;
+	perst-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
 	wake-gpio = <&tlmm 50 GPIO_ACTIVE_LOW>;
 };
 

target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4019-fritzbox-7530.dts

@@ -310,7 +310,7 @@
 	compatible = "qcom,pcie-ipq4019-lantiq-hack";
 	status = "okay";
 
-	perst-gpio = <&tlmm 38 GPIO_ACTIVE_LOW>;
+	perst-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
 	wake-gpio = <&tlmm 50 GPIO_ACTIVE_LOW>;
 };
 

target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4019-fritzrepeater-3000.dts

@@ -231,7 +231,7 @@
 &pcie0 {
 	status = "okay";
 
-	perst-gpio = <&tlmm 35 GPIO_ACTIVE_LOW>;
+	perst-gpios = <&tlmm 35 GPIO_ACTIVE_LOW>;
 	wake-gpio = <&tlmm 50 GPIO_ACTIVE_LOW>;
 };
 

target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4019-gl-b2200.dts

@@ -332,7 +332,7 @@
 
 &pcie0 {
 	status = "okay";
-	perst-gpio = <&tlmm 38 GPIO_ACTIVE_LOW>;
+	perst-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
 	wake-gpio = <&tlmm 50 GPIO_ACTIVE_LOW>;
 };
 

target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4019-habanero-dvk.dts

@@ -319,7 +319,7 @@
 &pcie0 {
 	status = "okay";
 
-	perst-gpio = <&tlmm 38 GPIO_ACTIVE_LOW>;
+	perst-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
 	wake-gpio = <&tlmm 50 GPIO_ACTIVE_LOW>;
 };
 

target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4019-lhgg-60ad.dts

@@ -226,7 +226,7 @@
 
 &pcie0 {
 	status = "okay";
-	perst-gpio = <&tlmm 42 GPIO_ACTIVE_HIGH>;
+	perst-gpios = <&tlmm 42 GPIO_ACTIVE_HIGH>;
 };
 
 &pcie_bridge0 {

target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4019-map-ac2200.dts

@@ -203,7 +203,7 @@
 
 &pcie0 {
 	status = "okay";
-	perst-gpio = <&tlmm 38 GPIO_ACTIVE_LOW>;
+	perst-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
 	wake-gpio = <&tlmm 50 GPIO_ACTIVE_LOW>;
 };
 

target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4019-mf18a.dts

@@ -469,7 +469,7 @@
 //* This node is used for 5Ghz on QCA9982 */
 &pcie0 {
 	status = "okay";
-	perst-gpio = <&tlmm 38 GPIO_ACTIVE_LOW>;
+	perst-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
 	wake-gpio = <&tlmm 40 GPIO_ACTIVE_LOW>;
 	clkreq-gpio = <&tlmm 39 GPIO_ACTIVE_LOW>;
 };

target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4019-mf289f.dts

@@ -420,7 +420,7 @@
 /* This node is used only on AT1 version for 5Ghz on QCA9984 */
 &pcie0 {
 	status = "okay";
-	perst-gpio = <&tlmm 38 GPIO_ACTIVE_LOW>;
+	perst-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
 	wake-gpio = <&tlmm 40 GPIO_ACTIVE_LOW>;
 	clkreq-gpio = <&tlmm 39 GPIO_ACTIVE_LOW>;
 };

target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4019-orbi.dtsi

@@ -309,7 +309,7 @@
 &pcie0 {
 	status = "okay";
 
-	perst-gpio = <&tlmm 38 GPIO_ACTIVE_LOW>;
+	perst-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
 	wake-gpio = <&tlmm 50 GPIO_ACTIVE_LOW>;
 };
 

target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4019-pa2200.dts

@@ -190,7 +190,7 @@
 
 &pcie0 {
 	status = "okay";
-	perst-gpio = <&tlmm 38 GPIO_ACTIVE_LOW>;
+	perst-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
 	wake-gpio = <&tlmm 50 GPIO_ACTIVE_LOW>;
 };
 

target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4019-r619ac.dtsi

@@ -208,7 +208,7 @@
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&pcie_pins>;
-	perst-gpio = <&tlmm 4 GPIO_ACTIVE_LOW>;
+	perst-gpios = <&tlmm 4 GPIO_ACTIVE_LOW>;
 	wake-gpio = <&tlmm 40 GPIO_ACTIVE_HIGH>;
 };
 

target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4019-rt-ac42u.dts

@@ -306,7 +306,7 @@
 
 &pcie0 {
 	status = "okay";
-	perst-gpio = <&tlmm 38 GPIO_ACTIVE_LOW>;
+	perst-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
 	wake-gpio = <&tlmm 50 GPIO_ACTIVE_LOW>;
 	clkreq-gpio = <&tlmm 39 GPIO_ACTIVE_LOW>;
 };

target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4019-xx8300.dtsi

@@ -205,7 +205,7 @@
 &pcie0 {
 	status = "okay";
 
-	perst-gpio = <&tlmm 38 GPIO_ACTIVE_LOW>;
+	perst-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
 	wake-gpio = <&tlmm 50 GPIO_ACTIVE_LOW>;
 };
 

target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq4029-insect-common.dtsi

@@ -274,7 +274,7 @@
 
 &pcie0 {
 	status = "okay";
-	perst-gpio = <&tlmm 38 GPIO_ACTIVE_LOW>;
+	perst-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
 	wake-gpio = <&tlmm 50 GPIO_ACTIVE_LOW>;
 };
 

target/linux/ipq40xx/files-6.12/arch/arm/boot/dts/qcom/qcom-ipq40x9-dr40x9.dts

@@ -331,7 +331,7 @@
 &pcie0 {
 	status = "okay";
 
-	perst-gpio = <&tlmm 38 GPIO_ACTIVE_LOW>;
+	perst-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
 	wake-gpio = <&tlmm 40 GPIO_ACTIVE_LOW>;
 };
 

target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq6010-mango-dvk.dts

@@ -338,7 +338,7 @@
 
 &pcie0 {
 	status = "okay";
-	perst-gpio = <&tlmm 60 GPIO_ACTIVE_LOW>;
+	perst-gpios = <&tlmm 60 GPIO_ACTIVE_LOW>;
 };
 
 &wifi {

target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq6010-xe3-4.dts

@@ -153,7 +153,7 @@
 
 &pcie0 {
 	status = "okay";
-	perst-gpio = <&tlmm 60 GPIO_ACTIVE_LOW>;
+	perst-gpios = <&tlmm 60 GPIO_ACTIVE_LOW>;
 
 	pcie@0 {
 		wifi@0,0 {

target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8071-ax3600.dts

@@ -48,7 +48,7 @@
 &pcie0 {
 	status = "okay";
 
-	perst-gpio = <&tlmm 52 GPIO_ACTIVE_HIGH>;
+	perst-gpios = <&tlmm 52 GPIO_ACTIVE_HIGH>;
 
 	pcie@0 {
 		wifi0: wifi@0,0 {

target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8072-ax9000.dts

@@ -533,7 +533,7 @@
 &pcie0 {
 	status = "okay";
 
-	perst-gpio = <&tlmm 58 GPIO_ACTIVE_LOW>;
+	perst-gpios = <&tlmm 58 GPIO_ACTIVE_LOW>;
 
 	pcie@0 {
 		wifi@0,0 {
@@ -555,7 +555,7 @@
 &pcie1 {
 	status = "okay";
 
-	perst-gpio = <&tlmm 62 GPIO_ACTIVE_HIGH>;
+	perst-gpios = <&tlmm 62 GPIO_ACTIVE_HIGH>;
 
 	pcie@0 {
 		wifi@0,0 {

target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8072-haze.dts

@@ -280,7 +280,7 @@
 &pcie0 {
 	status = "okay";
 
-	perst-gpio = <&tlmm 58 GPIO_ACTIVE_LOW>;
+	perst-gpios = <&tlmm 58 GPIO_ACTIVE_LOW>;
 };
 
 &pcie_qmp1 {
@@ -290,7 +290,7 @@
 &pcie1 {
 	status = "okay";
 
-	perst-gpio = <&tlmm 61 GPIO_ACTIVE_LOW>;
+	perst-gpios = <&tlmm 61 GPIO_ACTIVE_LOW>;
 
 	pcie@0 {
 		wifi@0,0 {

target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8072-mx5300.dts

@@ -520,7 +520,7 @@
 &pcie1 {
 	status = "okay";
 
-	perst-gpio = <&tlmm 58 GPIO_ACTIVE_LOW>;
+	perst-gpios = <&tlmm 58 GPIO_ACTIVE_LOW>;
 
 	pcie@0 {
 		wifi0: wifi@0,0 {

target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8072-mx8500.dts

@@ -514,7 +514,7 @@
 &pcie0 {
 	status = "okay";
 
-	perst-gpio = <&tlmm 61 GPIO_ACTIVE_LOW>;
+	perst-gpios = <&tlmm 61 GPIO_ACTIVE_LOW>;
 
 	pcie@0 {
 		wifi@0,0 {

target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8072-wpq873.dts

@@ -450,7 +450,7 @@
 &pcie0 {
 	status = "okay";
 
-	perst-gpio = <&tlmm 58 GPIO_ACTIVE_LOW>;
+	perst-gpios = <&tlmm 58 GPIO_ACTIVE_LOW>;
 };
 
 &pcie_qmp1 {
@@ -460,7 +460,7 @@
 &pcie1 {
 	status = "okay";
 
-	perst-gpio = <&tlmm 62 GPIO_ACTIVE_HIGH>;
+	perst-gpios = <&tlmm 62 GPIO_ACTIVE_HIGH>;
 };
 
 &wifi {