kernel: bump 4.19 to 4.19.73

Refreshed all patches.

Remove upstreamed:
- 840-media-i2c-tda1997x-select-V4L2_FWNODE.patch
- 079-v4.20-ARM-dts-qcom-ipq4019-fix-PCI-range.patch
- 083-ARM-dts-qcom-ipq4019-enlarge-PCIe-BAR-range.patch
- 084-ARM-dts-qcom-ipq4019-Fix-MSI-IRQ-type.patch

Fixes:
- CVE-2019-15030

Compile-tested on: cns3xxx
Runtime-tested on: cns3xxx

Signed-off-by: Koen Vandeputte <[email protected]>

include/kernel-version.mk

@@ -8,11 +8,11 @@ endif
 
 LINUX_VERSION-4.9 = .193
 LINUX_VERSION-4.14 = .144
-LINUX_VERSION-4.19 = .72
+LINUX_VERSION-4.19 = .73
 
 LINUX_KERNEL_HASH-4.9.193 = 9be5081cc0fa6b720e6b3e5cb90296f3d857469bb3cda09ff93db00f9e16fd01
 LINUX_KERNEL_HASH-4.14.144 = cb8b84675ba060b249ffa62de2366d16e842e3edfcb355ebbfb06bf3de03ca54
-LINUX_KERNEL_HASH-4.19.72 = f9fcb6b3bd29115ac55fc154e300c3dce2044502732f6842ad6c25e6f9f51f6d
+LINUX_KERNEL_HASH-4.19.73 = 7db5e77ef2a2d8da4b128b7d47d7dd645ebcde2d19c1d191793e1eeefc275fab
 
 remove_uri_prefix=$(subst git://,,$(subst http://,,$(subst https://,,$(1))))
 sanitize_uri=$(call qstrip,$(subst @,_,$(subst :,_,$(subst .,_,$(subst -,_,$(subst /,_,$(1)))))))

target/linux/brcm2708/patches-4.19/950-0691-media-vb2-set-reqbufs-create_bufs-capabilities.patch

@@ -80,7 +80,7 @@ Minor modifications required on the backport
  	 * Any -EBUSY result from vb2_verify_memory_type can be mapped to 0.
 --- a/drivers/media/platform/vim2m.c
 +++ b/drivers/media/platform/vim2m.c
-@@ -841,6 +841,7 @@ static int queue_init(void *priv, struct
+@@ -840,6 +840,7 @@ static int queue_init(void *priv, struct
  	src_vq->mem_ops = &vb2_vmalloc_memops;
  	src_vq->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_COPY;
  	src_vq->lock = &ctx->dev->dev_mutex;

target/linux/gemini/patches-4.19/0008-ARM-dts-Enable-Gemini-flash-access.patch

@@ -27,7 +27,7 @@ Signed-off-by: Linus Walleij <[email protected]>
  		gpio-miso = <&gpio1 8 GPIO_ACTIVE_HIGH>;
  		gpio-mosi = <&gpio1 7 GPIO_ACTIVE_HIGH>;
 -		/* Collides with pflash CE1, not so cool */
- 		cs-gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>;
+ 		cs-gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
  		num-chipselects = <1>;
  
 @@ -253,15 +252,18 @@

target/linux/generic/hack-4.19/204-module_strip.patch

@@ -114,7 +114,7 @@ Signed-off-by: Felix Fietkau <[email protected]>
  config MODULES_TREE_LOOKUP
 --- a/kernel/module.c
 +++ b/kernel/module.c
-@@ -3009,9 +3009,11 @@ static int setup_load_info(struct load_i
+@@ -3016,9 +3016,11 @@ static int setup_load_info(struct load_i
  
  static int check_modinfo(struct module *mod, struct load_info *info, int flags)
  {
@@ -127,7 +127,7 @@ Signed-off-by: Felix Fietkau <[email protected]>
  	if (flags & MODULE_INIT_IGNORE_VERMAGIC)
  		modmagic = NULL;
  
-@@ -3032,6 +3034,7 @@ static int check_modinfo(struct module *
+@@ -3039,6 +3041,7 @@ static int check_modinfo(struct module *
  				mod->name);
  		add_taint_module(mod, TAINT_OOT_MODULE, LOCKDEP_STILL_OK);
  	}

target/linux/generic/hack-4.19/930-crashlog.patch

@@ -280,7 +280,7 @@ Signed-off-by: Felix Fietkau <[email protected]>
 +module_init(crashlog_init_fs);
 --- a/kernel/module.c
 +++ b/kernel/module.c
-@@ -256,6 +256,9 @@ static void mod_update_bounds(struct mod
+@@ -251,6 +251,9 @@ static void mod_update_bounds(struct mod
  #ifdef CONFIG_KGDB_KDB
  struct list_head *kdb_modules = &modules; /* kdb needs the list of modules */
  #endif /* CONFIG_KGDB_KDB */

target/linux/generic/pending-4.19/840-media-i2c-tda1997x-select-V4L2_FWNODE.patch

@@ -1,43 +0,0 @@
-From 237e88dcbcb0098e1a8a0887fb7299fcf18650a5 Mon Sep 17 00:00:00 2001
-From: Koen Vandeputte <[email protected]>
-Date: Mon, 18 Mar 2019 17:39:26 +0100
-Subject: [PATCH] media: i2c: tda1997x: select V4L2_FWNODE
-
-Building tda1997x fails now unless V4L2_FWNODE is selected:
-
-drivers/media/i2c/tda1997x.o: in function `tda1997x_parse_dt'
-undefined reference to `v4l2_fwnode_endpoint_parse'
-
-While at it, also sort the selections alphabetically
-
-Fixes: 9ac0038db9a7 ("media: i2c: Add TDA1997x HDMI receiver driver")
-Signed-off-by: Koen Vandeputte <[email protected]>
-Cc: Akinobu Mita <[email protected]>
-Cc: Bingbu Cao <[email protected]>
-Cc: Hans Verkuil <[email protected]>
-Cc: Jacopo Mondi <[email protected]>
-Cc: Matt Ranostay <[email protected]>
-Cc: Mauro Carvalho Chehab <[email protected]>
-Cc: Robin Leblon <[email protected]>
-Cc: Rui Miguel Silva <[email protected]>
-Cc: Sakari Ailus <[email protected]>
-Cc: Tim Harvey <[email protected]>
-Cc: [email protected]
-Cc: [email protected] # v4.17+
----
- drivers/media/i2c/Kconfig | 3 ++-
- 1 file changed, 2 insertions(+), 1 deletion(-)
-
---- a/drivers/media/i2c/Kconfig
-+++ b/drivers/media/i2c/Kconfig
-@@ -60,8 +60,9 @@ config VIDEO_TDA1997X
- 	tristate "NXP TDA1997x HDMI receiver"
- 	depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API
- 	depends on SND_SOC
--	select SND_PCM
- 	select HDMI
-+	select SND_PCM
-+	select V4L2_FWNODE
- 	---help---
- 	  V4L2 subdevice driver for the NXP TDA1997x HDMI receivers.
- 

target/linux/ipq40xx/patches-4.19/079-v4.20-ARM-dts-qcom-ipq4019-fix-PCI-range.patch

@@ -1,25 +0,0 @@
-From da89f500cb55fb3f19c4b399b46d8add0abbd4d6 Mon Sep 17 00:00:00 2001
-From: Mathias Kresin <[email protected]>
-Date: Wed, 25 Jul 2018 10:37:48 +0200
-Subject: [PATCH] ARM: dts: qcom: ipq4019: fix PCI range
-
-The PCI range is invalid and PCI attached devices doen't work.
-
-Signed-off-by: Mathias Kresin <[email protected]>
-Signed-off-by: John Crispin <[email protected]>
-Signed-off-by: Andy Gross <[email protected]>
----
- arch/arm/boot/dts/qcom-ipq4019.dtsi | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
-+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
-@@ -405,7 +405,7 @@
- 			#size-cells = <2>;
- 
- 			ranges = <0x81000000 0 0x40200000 0x40200000 0 0x00100000
--				  0x82000000 0 0x48000000 0x48000000 0 0x10000000>;
-+				  0x82000000 0 0x40300000 0x40300000 0 0x400000>;
- 
- 			interrupts = <GIC_SPI 141 IRQ_TYPE_EDGE_RISING>;
- 			interrupt-names = "msi";

target/linux/ipq40xx/patches-4.19/083-ARM-dts-qcom-ipq4019-enlarge-PCIe-BAR-range.patch

@@ -1,42 +0,0 @@
-From: Christian Lamparter <[email protected]>
-Date: Mon, 25 Feb 2019 20:14:19 +0100
-Subject: [PATCH] ARM: dts: qcom: ipq4019: enlarge PCIe BAR range
-
-David Bauer reported that the VDSL modem (attached via PCIe)
-on his AVM Fritz!Box 7530 was complaining about not having
-enough space in the BAR. A closer inspection of the old
-qcom-ipq40xx.dtsi pulled from the GL-iNet repository listed:
-
-| qcom,pcie@80000 {
-|	compatible = "qcom,msm_pcie";
-|	reg = <0x80000 0x2000>,
-|	      <0x99000 0x800>,
-|	      <0x40000000 0xf1d>,
-|	      <0x40000f20 0xa8>,
-|	      <0x40100000 0x1000>,
-|	      <0x40200000 0x100000>,
-|	      <0x40300000 0xd00000>;
-|	reg-names = "parf", "phy", "dm_core", "elbi",
-|			"conf", "io", "bars";
-
-Matching the reg-names with the listed reg leads to
-<0xd00000> as the size for the "bars".
-
-BugLink: https://www.mail-archive.com/[email protected]/msg45212.html
-Reported-by: David Bauer <[email protected]>
-Signed-off-by: Christian Lamparter <[email protected]>
----
-
---- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
-+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
-@@ -405,8 +405,8 @@
- 			#address-cells = <3>;
- 			#size-cells = <2>;
- 
--			ranges = <0x81000000 0 0x40200000 0x40200000 0 0x00100000
--				  0x82000000 0 0x40300000 0x40300000 0 0x400000>;
-+			ranges = <0x81000000 0 0x40200000 0x40200000 0 0x00100000>,
-+				 <0x82000000 0 0x40300000 0x40300000 0 0x00d00000>;
- 
- 			interrupts = <GIC_SPI 141 IRQ_TYPE_EDGE_RISING>;
- 			interrupt-names = "msi";

target/linux/ipq40xx/patches-4.19/084-ARM-dts-qcom-ipq4019-Fix-MSI-IRQ-type.patch

@@ -1,32 +0,0 @@
-From: Niklas Cassel <[email protected]>
-Subject: [PATCH] ARM: dts: qcom: ipq4019: Fix MSI IRQ type
-Date: Thu, 24 Jan 2019 14:00:47 +0100
-
-The databook clearly states that the MSI IRQ (msi_ctrl_int) is a level
-triggered interrupt.
-
-The msi_ctrl_int will be high for as long as any MSI status bit is set,
-thus the IRQ type should be set to IRQ_TYPE_LEVEL_HIGH, causing the
-IRQ handler to keep getting called, as long as any MSI status bit is set.
-
-A git grep shows that ipq4019 is the only SoC using snps,dw-pcie that has
-configured this IRQ incorrectly.
-
-Not having the correct IRQ type defined will cause us to lose interrupts,
-which in turn causes timeouts in the PCIe endpoint drivers.
-
-Signed-off-by: Niklas Cassel <[email protected]>
-Reviewed-by: Bjorn Andersson <[email protected]>
----
-
---- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
-+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
-@@ -408,7 +408,7 @@
- 			ranges = <0x81000000 0 0x40200000 0x40200000 0 0x00100000>,
- 				 <0x82000000 0 0x40300000 0x40300000 0 0x00d00000>;
- 
--			interrupts = <GIC_SPI 141 IRQ_TYPE_EDGE_RISING>;
-+			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
- 			interrupt-names = "msi";
- 			#interrupt-cells = <1>;
- 			interrupt-map-mask = <0 0 0 0x7>;