firmware-utils: replace md5 code with Alexander Peslyak's implementation

Our current implementation is pretty old and uses some pre-standard/old
ANSI C style that triggers warnings like:
warning: call to function 'MD5_Init' without a real prototype [-Wunprototyped-calls]

This is caused by declarations specified in a following way:
src/md5.h:60:6: note: 'MD5_Init' was declared here
 void MD5_Init ();

Having these warnings makes it harded to notice real problems. We could
try hiding them but it makes more sense to just use a cleaner code.
Another tiny gain from this switch is slightly reduced binary size, on
x86_64 tplink-safeloader's size 48104 became 48003.

The new code is public domain, uses "heavily cut-down BSD license".

Signed-off-by: Rafał Miłecki <[email protected]>

tools/firmware-utils/src/md5.c

@@ -1,307 +1,296 @@
-
-
 /*
- ***********************************************************************
- ** md5.c -- the source code for MD5 routines                         **
- ** RSA Data Security, Inc. MD5 Message-Digest Algorithm              **
- ** Created: 2/17/90 RLR                                              **
- ** Revised: 1/91 SRD,AJ,BSK,JT Reference C ver., 7/10 constant corr. **
- ***********************************************************************
+ * This is an OpenSSL-compatible implementation of the RSA Data Security, Inc.
+ * MD5 Message-Digest Algorithm (RFC 1321).
+ *
+ * Homepage:
+ * http://openwall.info/wiki/people/solar/software/public-domain-source-code/md5
+ *
+ * Author:
+ * Alexander Peslyak, better known as Solar Designer <solar at openwall.com>
+ *
+ * This software was written by Alexander Peslyak in 2001.  No copyright is
+ * claimed, and the software is hereby placed in the public domain.
+ * In case this attempt to disclaim copyright and place the software in the
+ * public domain is deemed null and void, then the software is
+ * Copyright (c) 2001 Alexander Peslyak and it is hereby released to the
+ * general public under the following terms:
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted.
+ *
+ * There's ABSOLUTELY NO WARRANTY, express or implied.
+ *
+ * (This is a heavily cut-down "BSD license".)
+ *
+ * This differs from Colin Plumb's older public domain implementation in that
+ * no exactly 32-bit integer data type is required (any 32-bit or wider
+ * unsigned integer data type will do), there's no compile-time endianness
+ * configuration, and the function prototypes match OpenSSL's.  No code from
+ * Colin Plumb's implementation has been reused; this comment merely compares
+ * the properties of the two independent implementations.
+ *
+ * The primary goals of this implementation are portability and ease of use.
+ * It is meant to be fast, but not as fast as possible.  Some known
+ * optimizations are not included to reduce source code size and avoid
+ * compile-time configuration.
  */
 
-/*
- ***********************************************************************
- ** Copyright (C) 1990, RSA Data Security, Inc. All rights reserved.  **
- **                                                                   **
- ** License to copy and use this software is granted provided that    **
- ** it is identified as the "RSA Data Security, Inc. MD5 Message-     **
- ** Digest Algorithm" in all material mentioning or referencing this  **
- ** software or this function.                                        **
- **                                                                   **
- ** License is also granted to make and use derivative works          **
- ** provided that such works are identified as "derived from the RSA  **
- ** Data Security, Inc. MD5 Message-Digest Algorithm" in all          **
- ** material mentioning or referencing the derived work.              **
- **                                                                   **
- ** RSA Data Security, Inc. makes no representations concerning       **
- ** either the merchantability of this software or the suitability    **
- ** of this software for any particular purpose.  It is provided "as  **
- ** is" without express or implied warranty of any kind.              **
- **                                                                   **
- ** These notices must be retained in any copies of any part of this  **
- ** documentation and/or software.                                    **
- ***********************************************************************
- */
+#ifndef HAVE_OPENSSL
 
 #include <string.h>
+
 #include "md5.h"
 
 /*
- ***********************************************************************
- **  Message-digest routines:                                         **
- **  To form the message digest for a message M                       **
- **    (1) Initialize a context buffer mdContext using MD5_Init       **
- **    (2) Call MD5_Update on mdContext and M                         **
- **    (3) Call MD5_Final on mdContext                                **
- **  The message digest is now in mdContext->digest[0...15]           **
- ***********************************************************************
+ * The basic MD5 functions.
+ *
+ * F and G are optimized compared to their RFC 1321 definitions for
+ * architectures that lack an AND-NOT instruction, just like in Colin Plumb's
+ * implementation.
+ */
+#define F(x, y, z)			((z) ^ ((x) & ((y) ^ (z))))
+#define G(x, y, z)			((y) ^ ((z) & ((x) ^ (y))))
+#define H(x, y, z)			(((x) ^ (y)) ^ (z))
+#define H2(x, y, z)			((x) ^ ((y) ^ (z)))
+#define I(x, y, z)			((y) ^ ((x) | ~(z)))
+
+/*
+ * The MD5 transformation for all four rounds.
  */
+#define STEP(f, a, b, c, d, x, t, s) \
+	(a) += f((b), (c), (d)) + (x) + (t); \
+	(a) = (((a) << (s)) | (((a) & 0xffffffff) >> (32 - (s)))); \
+	(a) += (b);
 
-/* forward declaration */
-static void Transform ();
-
-static unsigned char PADDING[64] = {
-  0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
-};
-
-/* F, G, H and I are basic MD5 functions */
-#define F(x, y, z) (((x) & (y)) | ((~x) & (z)))
-#define G(x, y, z) (((x) & (z)) | ((y) & (~z)))
-#define H(x, y, z) ((x) ^ (y) ^ (z))
-#define I(x, y, z) ((y) ^ ((x) | (~z)))
-
-/* ROTATE_LEFT rotates x left n bits */
-#define ROTATE_LEFT(x, n) (((x) << (n)) | ((x) >> (32-(n))))
-
-/* FF, GG, HH, and II transformations for rounds 1, 2, 3, and 4 */
-/* Rotation is separate from addition to prevent recomputation */
-#define FF(a, b, c, d, x, s, ac) \
-  {(a) += F ((b), (c), (d)) + (x) + (UINT4)(ac); \
-   (a) = ROTATE_LEFT ((a), (s)); \
-   (a) += (b); \
-  }
-#define GG(a, b, c, d, x, s, ac) \
-  {(a) += G ((b), (c), (d)) + (x) + (UINT4)(ac); \
-   (a) = ROTATE_LEFT ((a), (s)); \
-   (a) += (b); \
-  }
-#define HH(a, b, c, d, x, s, ac) \
-  {(a) += H ((b), (c), (d)) + (x) + (UINT4)(ac); \
-   (a) = ROTATE_LEFT ((a), (s)); \
-   (a) += (b); \
-  }
-#define II(a, b, c, d, x, s, ac) \
-  {(a) += I ((b), (c), (d)) + (x) + (UINT4)(ac); \
-   (a) = ROTATE_LEFT ((a), (s)); \
-   (a) += (b); \
-  }
-
-#ifdef __STDC__
-#define UL(x)	x##U
+/*
+ * SET reads 4 input bytes in little-endian byte order and stores them
+ * in a properly aligned word in host byte order.
+ *
+ * The check for little-endian architectures that tolerate unaligned
+ * memory accesses is just an optimization.  Nothing will break if it
+ * doesn't work.
+ */
+#if defined(__i386__) || defined(__x86_64__) || defined(__vax__)
+#define SET(n) \
+	(*(MD5_u32plus *)&ptr[(n) * 4])
+#define GET(n) \
+	SET(n)
 #else
-#define UL(x)	x
+#define SET(n) \
+	(ctx->block[(n)] = \
+	(MD5_u32plus)ptr[(n) * 4] | \
+	((MD5_u32plus)ptr[(n) * 4 + 1] << 8) | \
+	((MD5_u32plus)ptr[(n) * 4 + 2] << 16) | \
+	((MD5_u32plus)ptr[(n) * 4 + 3] << 24))
+#define GET(n) \
+	(ctx->block[(n)])
 #endif
 
-/* The routine MD5_Init initializes the message-digest context
-   mdContext. All fields are set to zero.
+/*
+ * This processes one or more 64-byte data blocks, but does NOT update
+ * the bit counters.  There are no alignment requirements.
  */
-void MD5_Init (mdContext)
-MD5_CTX *mdContext;
+static const void *body(MD5_CTX *ctx, const void *data, unsigned long size)
 {
-  mdContext->i[0] = mdContext->i[1] = (UINT4)0;
-
-  /* Load magic initialization constants.
-   */
-  mdContext->buf[0] = (UINT4)0x67452301;
-  mdContext->buf[1] = (UINT4)0xefcdab89;
-  mdContext->buf[2] = (UINT4)0x98badcfe;
-  mdContext->buf[3] = (UINT4)0x10325476;
+	const unsigned char *ptr;
+	MD5_u32plus a, b, c, d;
+	MD5_u32plus saved_a, saved_b, saved_c, saved_d;
+
+	ptr = (const unsigned char *)data;
+
+	a = ctx->a;
+	b = ctx->b;
+	c = ctx->c;
+	d = ctx->d;
+
+	do {
+		saved_a = a;
+		saved_b = b;
+		saved_c = c;
+		saved_d = d;
+
+/* Round 1 */
+		STEP(F, a, b, c, d, SET(0), 0xd76aa478, 7)
+		STEP(F, d, a, b, c, SET(1), 0xe8c7b756, 12)
+		STEP(F, c, d, a, b, SET(2), 0x242070db, 17)
+		STEP(F, b, c, d, a, SET(3), 0xc1bdceee, 22)
+		STEP(F, a, b, c, d, SET(4), 0xf57c0faf, 7)
+		STEP(F, d, a, b, c, SET(5), 0x4787c62a, 12)
+		STEP(F, c, d, a, b, SET(6), 0xa8304613, 17)
+		STEP(F, b, c, d, a, SET(7), 0xfd469501, 22)
+		STEP(F, a, b, c, d, SET(8), 0x698098d8, 7)
+		STEP(F, d, a, b, c, SET(9), 0x8b44f7af, 12)
+		STEP(F, c, d, a, b, SET(10), 0xffff5bb1, 17)
+		STEP(F, b, c, d, a, SET(11), 0x895cd7be, 22)
+		STEP(F, a, b, c, d, SET(12), 0x6b901122, 7)
+		STEP(F, d, a, b, c, SET(13), 0xfd987193, 12)
+		STEP(F, c, d, a, b, SET(14), 0xa679438e, 17)
+		STEP(F, b, c, d, a, SET(15), 0x49b40821, 22)
+
+/* Round 2 */
+		STEP(G, a, b, c, d, GET(1), 0xf61e2562, 5)
+		STEP(G, d, a, b, c, GET(6), 0xc040b340, 9)
+		STEP(G, c, d, a, b, GET(11), 0x265e5a51, 14)
+		STEP(G, b, c, d, a, GET(0), 0xe9b6c7aa, 20)
+		STEP(G, a, b, c, d, GET(5), 0xd62f105d, 5)
+		STEP(G, d, a, b, c, GET(10), 0x02441453, 9)
+		STEP(G, c, d, a, b, GET(15), 0xd8a1e681, 14)
+		STEP(G, b, c, d, a, GET(4), 0xe7d3fbc8, 20)
+		STEP(G, a, b, c, d, GET(9), 0x21e1cde6, 5)
+		STEP(G, d, a, b, c, GET(14), 0xc33707d6, 9)
+		STEP(G, c, d, a, b, GET(3), 0xf4d50d87, 14)
+		STEP(G, b, c, d, a, GET(8), 0x455a14ed, 20)
+		STEP(G, a, b, c, d, GET(13), 0xa9e3e905, 5)
+		STEP(G, d, a, b, c, GET(2), 0xfcefa3f8, 9)
+		STEP(G, c, d, a, b, GET(7), 0x676f02d9, 14)
+		STEP(G, b, c, d, a, GET(12), 0x8d2a4c8a, 20)
+
+/* Round 3 */
+		STEP(H, a, b, c, d, GET(5), 0xfffa3942, 4)
+		STEP(H2, d, a, b, c, GET(8), 0x8771f681, 11)
+		STEP(H, c, d, a, b, GET(11), 0x6d9d6122, 16)
+		STEP(H2, b, c, d, a, GET(14), 0xfde5380c, 23)
+		STEP(H, a, b, c, d, GET(1), 0xa4beea44, 4)
+		STEP(H2, d, a, b, c, GET(4), 0x4bdecfa9, 11)
+		STEP(H, c, d, a, b, GET(7), 0xf6bb4b60, 16)
+		STEP(H2, b, c, d, a, GET(10), 0xbebfbc70, 23)
+		STEP(H, a, b, c, d, GET(13), 0x289b7ec6, 4)
+		STEP(H2, d, a, b, c, GET(0), 0xeaa127fa, 11)
+		STEP(H, c, d, a, b, GET(3), 0xd4ef3085, 16)
+		STEP(H2, b, c, d, a, GET(6), 0x04881d05, 23)
+		STEP(H, a, b, c, d, GET(9), 0xd9d4d039, 4)
+		STEP(H2, d, a, b, c, GET(12), 0xe6db99e5, 11)
+		STEP(H, c, d, a, b, GET(15), 0x1fa27cf8, 16)
+		STEP(H2, b, c, d, a, GET(2), 0xc4ac5665, 23)
+
+/* Round 4 */
+		STEP(I, a, b, c, d, GET(0), 0xf4292244, 6)
+		STEP(I, d, a, b, c, GET(7), 0x432aff97, 10)
+		STEP(I, c, d, a, b, GET(14), 0xab9423a7, 15)
+		STEP(I, b, c, d, a, GET(5), 0xfc93a039, 21)
+		STEP(I, a, b, c, d, GET(12), 0x655b59c3, 6)
+		STEP(I, d, a, b, c, GET(3), 0x8f0ccc92, 10)
+		STEP(I, c, d, a, b, GET(10), 0xffeff47d, 15)
+		STEP(I, b, c, d, a, GET(1), 0x85845dd1, 21)
+		STEP(I, a, b, c, d, GET(8), 0x6fa87e4f, 6)
+		STEP(I, d, a, b, c, GET(15), 0xfe2ce6e0, 10)
+		STEP(I, c, d, a, b, GET(6), 0xa3014314, 15)
+		STEP(I, b, c, d, a, GET(13), 0x4e0811a1, 21)
+		STEP(I, a, b, c, d, GET(4), 0xf7537e82, 6)
+		STEP(I, d, a, b, c, GET(11), 0xbd3af235, 10)
+		STEP(I, c, d, a, b, GET(2), 0x2ad7d2bb, 15)
+		STEP(I, b, c, d, a, GET(9), 0xeb86d391, 21)
+
+		a += saved_a;
+		b += saved_b;
+		c += saved_c;
+		d += saved_d;
+
+		ptr += 64;
+	} while (size -= 64);
+
+	ctx->a = a;
+	ctx->b = b;
+	ctx->c = c;
+	ctx->d = d;
+
+	return ptr;
 }
 
-/* The routine MD5Update updates the message-digest context to
-   account for the presence of each of the characters inBuf[0..inLen-1]
-   in the message whose digest is being computed.
- */
-void MD5_Update (mdContext, inBuf, inLen)
-MD5_CTX *mdContext;
-unsigned char *inBuf;
-unsigned int inLen;
+void MD5_Init(MD5_CTX *ctx)
 {
-  UINT4 in[16];
-  int mdi;
-  unsigned int i, ii;
-
-  /* compute number of bytes mod 64 */
-  mdi = (int)((mdContext->i[0] >> 3) & 0x3F);
-
-  /* update number of bits */
-  if ((mdContext->i[0] + ((UINT4)inLen << 3)) < mdContext->i[0])
-    mdContext->i[1]++;
-  mdContext->i[0] += ((UINT4)inLen << 3);
-  mdContext->i[1] += ((UINT4)inLen >> 29);
-
-  while (inLen--) {
-    /* add new character to buffer, increment mdi */
-    mdContext->in[mdi++] = *inBuf++;
-
-    /* transform if necessary */
-    if (mdi == 0x40) {
-      for (i = 0, ii = 0; i < 16; i++, ii += 4)
-        in[i] = (((UINT4)mdContext->in[ii+3]) << 24) |
-                (((UINT4)mdContext->in[ii+2]) << 16) |
-                (((UINT4)mdContext->in[ii+1]) << 8) |
-                ((UINT4)mdContext->in[ii]);
-      Transform (mdContext->buf, in);
-      mdi = 0;
-    }
-  }
+	ctx->a = 0x67452301;
+	ctx->b = 0xefcdab89;
+	ctx->c = 0x98badcfe;
+	ctx->d = 0x10325476;
+
+	ctx->lo = 0;
+	ctx->hi = 0;
 }
 
-/* The routine MD5Final terminates the message-digest computation and
-   ends with the desired message digest in mdContext->digest[0...15].
- */
-void MD5_Final (hash, mdContext)
-unsigned char hash[];
-MD5_CTX *mdContext;
+void MD5_Update(MD5_CTX *ctx, const void *data, unsigned long size)
 {
-  UINT4 in[16];
-  int mdi;
-  unsigned int i, ii;
-  unsigned int padLen;
-
-  /* save number of bits */
-  in[14] = mdContext->i[0];
-  in[15] = mdContext->i[1];
-
-  /* compute number of bytes mod 64 */
-  mdi = (int)((mdContext->i[0] >> 3) & 0x3F);
-
-  /* pad out to 56 mod 64 */
-  padLen = (mdi < 56) ? (56 - mdi) : (120 - mdi);
-  MD5_Update (mdContext, PADDING, padLen);
-
-  /* append length in bits and transform */
-  for (i = 0, ii = 0; i < 14; i++, ii += 4)
-    in[i] = (((UINT4)mdContext->in[ii+3]) << 24) |
-            (((UINT4)mdContext->in[ii+2]) << 16) |
-            (((UINT4)mdContext->in[ii+1]) << 8) |
-            ((UINT4)mdContext->in[ii]);
-  Transform (mdContext->buf, in);
-
-  /* store buffer in digest */
-  for (i = 0, ii = 0; i < 4; i++, ii += 4) {
-    mdContext->digest[ii] = (unsigned char)(mdContext->buf[i] & 0xFF);
-    mdContext->digest[ii+1] =
-      (unsigned char)((mdContext->buf[i] >> 8) & 0xFF);
-    mdContext->digest[ii+2] =
-      (unsigned char)((mdContext->buf[i] >> 16) & 0xFF);
-    mdContext->digest[ii+3] =
-      (unsigned char)((mdContext->buf[i] >> 24) & 0xFF);
-  }
-  memcpy(hash, mdContext->digest, 16);
+	MD5_u32plus saved_lo;
+	unsigned long used, available;
+
+	saved_lo = ctx->lo;
+	if ((ctx->lo = (saved_lo + size) & 0x1fffffff) < saved_lo)
+		ctx->hi++;
+	ctx->hi += size >> 29;
+
+	used = saved_lo & 0x3f;
+
+	if (used) {
+		available = 64 - used;
+
+		if (size < available) {
+			memcpy(&ctx->buffer[used], data, size);
+			return;
+		}
+
+		memcpy(&ctx->buffer[used], data, available);
+		data = (const unsigned char *)data + available;
+		size -= available;
+		body(ctx, ctx->buffer, 64);
+	}
+
+	if (size >= 64) {
+		data = body(ctx, data, size & ~(unsigned long)0x3f);
+		size &= 0x3f;
+	}
+
+	memcpy(ctx->buffer, data, size);
 }
 
-/* Basic MD5 step. Transforms buf based on in.
- */
-static void Transform (buf, in)
-UINT4 *buf;
-UINT4 *in;
+void MD5_Final(unsigned char *result, MD5_CTX *ctx)
 {
-  UINT4 a = buf[0], b = buf[1], c = buf[2], d = buf[3];
-
-  /* Round 1 */
-#define S11 7
-#define S12 12
-#define S13 17
-#define S14 22
-  FF ( a, b, c, d, in[ 0], S11, UL(3614090360)); /* 1 */
-  FF ( d, a, b, c, in[ 1], S12, UL(3905402710)); /* 2 */
-  FF ( c, d, a, b, in[ 2], S13, UL( 606105819)); /* 3 */
-  FF ( b, c, d, a, in[ 3], S14, UL(3250441966)); /* 4 */
-  FF ( a, b, c, d, in[ 4], S11, UL(4118548399)); /* 5 */
-  FF ( d, a, b, c, in[ 5], S12, UL(1200080426)); /* 6 */
-  FF ( c, d, a, b, in[ 6], S13, UL(2821735955)); /* 7 */
-  FF ( b, c, d, a, in[ 7], S14, UL(4249261313)); /* 8 */
-  FF ( a, b, c, d, in[ 8], S11, UL(1770035416)); /* 9 */
-  FF ( d, a, b, c, in[ 9], S12, UL(2336552879)); /* 10 */
-  FF ( c, d, a, b, in[10], S13, UL(4294925233)); /* 11 */
-  FF ( b, c, d, a, in[11], S14, UL(2304563134)); /* 12 */
-  FF ( a, b, c, d, in[12], S11, UL(1804603682)); /* 13 */
-  FF ( d, a, b, c, in[13], S12, UL(4254626195)); /* 14 */
-  FF ( c, d, a, b, in[14], S13, UL(2792965006)); /* 15 */
-  FF ( b, c, d, a, in[15], S14, UL(1236535329)); /* 16 */
-
-  /* Round 2 */
-#define S21 5
-#define S22 9
-#define S23 14
-#define S24 20
-  GG ( a, b, c, d, in[ 1], S21, UL(4129170786)); /* 17 */
-  GG ( d, a, b, c, in[ 6], S22, UL(3225465664)); /* 18 */
-  GG ( c, d, a, b, in[11], S23, UL( 643717713)); /* 19 */
-  GG ( b, c, d, a, in[ 0], S24, UL(3921069994)); /* 20 */
-  GG ( a, b, c, d, in[ 5], S21, UL(3593408605)); /* 21 */
-  GG ( d, a, b, c, in[10], S22, UL(  38016083)); /* 22 */
-  GG ( c, d, a, b, in[15], S23, UL(3634488961)); /* 23 */
-  GG ( b, c, d, a, in[ 4], S24, UL(3889429448)); /* 24 */
-  GG ( a, b, c, d, in[ 9], S21, UL( 568446438)); /* 25 */
-  GG ( d, a, b, c, in[14], S22, UL(3275163606)); /* 26 */
-  GG ( c, d, a, b, in[ 3], S23, UL(4107603335)); /* 27 */
-  GG ( b, c, d, a, in[ 8], S24, UL(1163531501)); /* 28 */
-  GG ( a, b, c, d, in[13], S21, UL(2850285829)); /* 29 */
-  GG ( d, a, b, c, in[ 2], S22, UL(4243563512)); /* 30 */
-  GG ( c, d, a, b, in[ 7], S23, UL(1735328473)); /* 31 */
-  GG ( b, c, d, a, in[12], S24, UL(2368359562)); /* 32 */
-
-  /* Round 3 */
-#define S31 4
-#define S32 11
-#define S33 16
-#define S34 23
-  HH ( a, b, c, d, in[ 5], S31, UL(4294588738)); /* 33 */
-  HH ( d, a, b, c, in[ 8], S32, UL(2272392833)); /* 34 */
-  HH ( c, d, a, b, in[11], S33, UL(1839030562)); /* 35 */
-  HH ( b, c, d, a, in[14], S34, UL(4259657740)); /* 36 */
-  HH ( a, b, c, d, in[ 1], S31, UL(2763975236)); /* 37 */
-  HH ( d, a, b, c, in[ 4], S32, UL(1272893353)); /* 38 */
-  HH ( c, d, a, b, in[ 7], S33, UL(4139469664)); /* 39 */
-  HH ( b, c, d, a, in[10], S34, UL(3200236656)); /* 40 */
-  HH ( a, b, c, d, in[13], S31, UL( 681279174)); /* 41 */
-  HH ( d, a, b, c, in[ 0], S32, UL(3936430074)); /* 42 */
-  HH ( c, d, a, b, in[ 3], S33, UL(3572445317)); /* 43 */
-  HH ( b, c, d, a, in[ 6], S34, UL(  76029189)); /* 44 */
-  HH ( a, b, c, d, in[ 9], S31, UL(3654602809)); /* 45 */
-  HH ( d, a, b, c, in[12], S32, UL(3873151461)); /* 46 */
-  HH ( c, d, a, b, in[15], S33, UL( 530742520)); /* 47 */
-  HH ( b, c, d, a, in[ 2], S34, UL(3299628645)); /* 48 */
-
-  /* Round 4 */
-#define S41 6
-#define S42 10
-#define S43 15
-#define S44 21
-  II ( a, b, c, d, in[ 0], S41, UL(4096336452)); /* 49 */
-  II ( d, a, b, c, in[ 7], S42, UL(1126891415)); /* 50 */
-  II ( c, d, a, b, in[14], S43, UL(2878612391)); /* 51 */
-  II ( b, c, d, a, in[ 5], S44, UL(4237533241)); /* 52 */
-  II ( a, b, c, d, in[12], S41, UL(1700485571)); /* 53 */
-  II ( d, a, b, c, in[ 3], S42, UL(2399980690)); /* 54 */
-  II ( c, d, a, b, in[10], S43, UL(4293915773)); /* 55 */
-  II ( b, c, d, a, in[ 1], S44, UL(2240044497)); /* 56 */
-  II ( a, b, c, d, in[ 8], S41, UL(1873313359)); /* 57 */
-  II ( d, a, b, c, in[15], S42, UL(4264355552)); /* 58 */
-  II ( c, d, a, b, in[ 6], S43, UL(2734768916)); /* 59 */
-  II ( b, c, d, a, in[13], S44, UL(1309151649)); /* 60 */
-  II ( a, b, c, d, in[ 4], S41, UL(4149444226)); /* 61 */
-  II ( d, a, b, c, in[11], S42, UL(3174756917)); /* 62 */
-  II ( c, d, a, b, in[ 2], S43, UL( 718787259)); /* 63 */
-  II ( b, c, d, a, in[ 9], S44, UL(3951481745)); /* 64 */
-
-  buf[0] += a;
-  buf[1] += b;
-  buf[2] += c;
-  buf[3] += d;
+	unsigned long used, available;
+
+	used = ctx->lo & 0x3f;
+
+	ctx->buffer[used++] = 0x80;
+
+	available = 64 - used;
+
+	if (available < 8) {
+		memset(&ctx->buffer[used], 0, available);
+		body(ctx, ctx->buffer, 64);
+		used = 0;
+		available = 64;
+	}
+
+	memset(&ctx->buffer[used], 0, available - 8);
+
+	ctx->lo <<= 3;
+	ctx->buffer[56] = ctx->lo;
+	ctx->buffer[57] = ctx->lo >> 8;
+	ctx->buffer[58] = ctx->lo >> 16;
+	ctx->buffer[59] = ctx->lo >> 24;
+	ctx->buffer[60] = ctx->hi;
+	ctx->buffer[61] = ctx->hi >> 8;
+	ctx->buffer[62] = ctx->hi >> 16;
+	ctx->buffer[63] = ctx->hi >> 24;
+
+	body(ctx, ctx->buffer, 64);
+
+	result[0] = ctx->a;
+	result[1] = ctx->a >> 8;
+	result[2] = ctx->a >> 16;
+	result[3] = ctx->a >> 24;
+	result[4] = ctx->b;
+	result[5] = ctx->b >> 8;
+	result[6] = ctx->b >> 16;
+	result[7] = ctx->b >> 24;
+	result[8] = ctx->c;
+	result[9] = ctx->c >> 8;
+	result[10] = ctx->c >> 16;
+	result[11] = ctx->c >> 24;
+	result[12] = ctx->d;
+	result[13] = ctx->d >> 8;
+	result[14] = ctx->d >> 16;
+	result[15] = ctx->d >> 24;
+
+	memset(ctx, 0, sizeof(*ctx));
 }
 
-/*
- ***********************************************************************
- ** End of md5.c                                                      **
- ******************************** (cut) ********************************
- */
+#endif

tools/firmware-utils/src/md5.h

@@ -1,65 +1,45 @@
 /*
- ***********************************************************************
- ** md5.h -- header file for implementation of MD5                    **
- ** RSA Data Security, Inc. MD5 Message-Digest Algorithm              **
- ** Created: 2/17/90 RLR                                              **
- ** Revised: 12/27/90 SRD,AJ,BSK,JT Reference C version               **
- ** Revised (for MD5): RLR 4/27/91                                    **
- **   -- G modified to have y&~z instead of y&z                       **
- **   -- FF, GG, HH modified to add in last register done             **
- **   -- Access pattern: round 2 works mod 5, round 3 works mod 3     **
- **   -- distinct additive constant for each step                     **
- **   -- round 4 added, working mod 7                                 **
- ***********************************************************************
+ * This is an OpenSSL-compatible implementation of the RSA Data Security, Inc.
+ * MD5 Message-Digest Algorithm (RFC 1321).
+ *
+ * Homepage:
+ * http://openwall.info/wiki/people/solar/software/public-domain-source-code/md5
+ *
+ * Author:
+ * Alexander Peslyak, better known as Solar Designer <solar at openwall.com>
+ *
+ * This software was written by Alexander Peslyak in 2001.  No copyright is
+ * claimed, and the software is hereby placed in the public domain.
+ * In case this attempt to disclaim copyright and place the software in the
+ * public domain is deemed null and void, then the software is
+ * Copyright (c) 2001 Alexander Peslyak and it is hereby released to the
+ * general public under the following terms:
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted.
+ *
+ * There's ABSOLUTELY NO WARRANTY, express or implied.
+ *
+ * See md5.c for more information.
  */
 
-/*
- ***********************************************************************
- ** Copyright (C) 1990, RSA Data Security, Inc. All rights reserved.  **
- **                                                                   **
- ** License to copy and use this software is granted provided that    **
- ** it is identified as the "RSA Data Security, Inc. MD5 Message-     **
- ** Digest Algorithm" in all material mentioning or referencing this  **
- ** software or this function.                                        **
- **                                                                   **
- ** License is also granted to make and use derivative works          **
- ** provided that such works are identified as "derived from the RSA  **
- ** Data Security, Inc. MD5 Message-Digest Algorithm" in all          **
- ** material mentioning or referencing the derived work.              **
- **                                                                   **
- ** RSA Data Security, Inc. makes no representations concerning       **
- ** either the merchantability of this software or the suitability    **
- ** of this software for any particular purpose.  It is provided "as  **
- ** is" without express or implied warranty of any kind.              **
- **                                                                   **
- ** These notices must be retained in any copies of any part of this  **
- ** documentation and/or software.                                    **
- ***********************************************************************
- */
+#ifdef HAVE_OPENSSL
+#include <openssl/md5.h>
+#elif !defined(_MD5_H)
+#define _MD5_H
 
-#ifndef __MD5_INCLUDE__
+/* Any 32-bit or wider unsigned integer data type will do */
+typedef unsigned int MD5_u32plus;
 
-/* typedef a 32-bit type */
-#ifdef _LP64
-typedef unsigned int UINT4;
-typedef int          INT4;
-#else
-typedef unsigned long UINT4;
-typedef long          INT4;
-#endif
-#define _UINT4_T
-
-/* Data structure for MD5 (Message-Digest) computation */
 typedef struct {
-  UINT4 i[2];                   /* number of _bits_ handled mod 2^64 */
-  UINT4 buf[4];                                    /* scratch buffer */
-  unsigned char in[64];                              /* input buffer */
-  unsigned char digest[16];     /* actual digest after MD5Final call */
+	MD5_u32plus lo, hi;
+	MD5_u32plus a, b, c, d;
+	unsigned char buffer[64];
+	MD5_u32plus block[16];
 } MD5_CTX;
 
-void MD5_Init ();
-void MD5_Update ();
-void MD5_Final ();
+extern void MD5_Init(MD5_CTX *ctx);
+extern void MD5_Update(MD5_CTX *ctx, const void *data, unsigned long size);
+extern void MD5_Final(unsigned char *result, MD5_CTX *ctx);
 
-#define __MD5_INCLUDE__
-#endif /* __MD5_INCLUDE__ */
+#endif