Home Explore Help
Register Sign In
OpenWrt
/
openwrt
mirror of https://github.com/openwrt/openwrt.git
2
0
Fork 0
Files Issues 0 Wiki
Browse Source

uboot-mediatek: add TP-Link TL-XDR4288 and TL-XDR608x

TP-Link TL-XDR608x comes with locked vendor loader. Add U-Boot build
for replacement loader for both TL-XDR6086 and TL-XDR6088. The only
difference at U-Boot level is the different filename requested via
TFTP, matching the corresponding OpenWrt build artifacts for each
device.

The TP-Link TL-XDR4288 has the same hardware as the TP-Link TL-XDR6088
except for the wireless part. Also create a uboot for the TP-Link
TL-XDR4288.

Signed-off-by: Daniel Golle <[email protected]>
[rebase to uboot 23.04, correct led and button]
Signed-off-by: Chukun Pan <[email protected]>
Daniel Golle 2 years ago
parent
998b973157
commit
cc00e22029
3 changed files with 971 additions and 0 deletions
Split View Show Diff Stats
  1. 3 0
      package/boot/uboot-envtools/files/mediatek_filogic
  2. 39 0
      package/boot/uboot-mediatek/Makefile
  3. 929 0
      package/boot/uboot-mediatek/patches/432-add-tplink-xdr608x.patch

+ 3 - 0
package/boot/uboot-envtools/files/mediatek_filogic
View File 

@@ -41,6 +41,9 @@ xiaomi,redmi-router-ax6000-stock)
 
 	ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x10000" "0x20000"
 
 	ubootenv_add_uci_sys_config "/dev/mtd2" "0x0" "0x10000" "0x20000"
 
 	;;
 
+tplink,tl-xdr4288|\
 
+tplink,tl-xdr6086|\
 
+tplink,tl-xdr6088|\
 
 xiaomi,redmi-router-ax6000-ubootmod)
 
 	. /lib/upgrade/nand.sh
 
 	local envubi=$(nand_find_ubi ubi)

+ 39 - 0
package/boot/uboot-mediatek/Makefile
View File 

@@ -237,6 +237,42 @@ define U-Boot/mt7986_bananapi_bpi-r3-nor
 
   FIP_COMPRESS:=1
 
 endef
 
 
+define U-Boot/mt7986_tplink_tl-xdr4288
 
+  NAME:=TP-LINK TL-XDR4288
 
+  BUILD_SUBTARGET:=filogic
 
+  BUILD_DEVICES:=tplink_tl-xdr4288
 
+  UBOOT_CONFIG:=mt7986_tplink_tl-xdr4288
 
+  UBOOT_IMAGE:=u-boot.fip
 
+  BL2_BOOTDEV:=spim-nand
 
+  BL2_SOC:=mt7986
 
+  BL2_DDRTYPE:=ddr3
 
+  DEPENDS:=+trusted-firmware-a-mt7986-spim-nand-ddr3
 
+endef
 
+
 
+define U-Boot/mt7986_tplink_tl-xdr6086
 
+  NAME:=TP-LINK TL-XDR6086
 
+  BUILD_SUBTARGET:=filogic
 
+  BUILD_DEVICES:=tplink_tl-xdr6086
 
+  UBOOT_CONFIG:=mt7986_tplink_tl-xdr6086
 
+  UBOOT_IMAGE:=u-boot.fip
 
+  BL2_BOOTDEV:=spim-nand
 
+  BL2_SOC:=mt7986
 
+  BL2_DDRTYPE:=ddr3
 
+  DEPENDS:=+trusted-firmware-a-mt7986-spim-nand-ddr3
 
+endef
 
+
 
+define U-Boot/mt7986_tplink_tl-xdr6088
 
+  NAME:=TP-LINK TL-XDR6088
 
+  BUILD_SUBTARGET:=filogic
 
+  BUILD_DEVICES:=tplink_tl-xdr6088
 
+  UBOOT_CONFIG:=mt7986_tplink_tl-xdr6088
 
+  UBOOT_IMAGE:=u-boot.fip
 
+  BL2_BOOTDEV:=spim-nand
 
+  BL2_SOC:=mt7986
 
+  BL2_DDRTYPE:=ddr3
 
+  DEPENDS:=+trusted-firmware-a-mt7986-spim-nand-ddr3
 
+endef
 
+
 
 define U-Boot/mt7986_xiaomi_redmi-router-ax6000
 
   NAME:=Xiaomi Redmi AX6000
 
   BUILD_SUBTARGET:=filogic
 
@@ -269,6 +305,9 @@ UBOOT_TARGETS := \
 
 	mt7986_bananapi_bpi-r3-sdmmc \
 
 	mt7986_bananapi_bpi-r3-snand \
 
 	mt7986_bananapi_bpi-r3-nor \
 
+	mt7986_tplink_tl-xdr4288 \
 
+	mt7986_tplink_tl-xdr6086 \
 
+	mt7986_tplink_tl-xdr6088 \
 
 	mt7986_xiaomi_redmi-router-ax6000 \
 
 	mt7986_rfb

+ 929 - 0
package/boot/uboot-mediatek/patches/432-add-tplink-xdr608x.patch
View File 

@@ -0,0 +1,929 @@
 
+--- /dev/null
 
++++ b/configs/mt7986_tplink_tl-xdr4288_defconfig
 
+@@ -0,0 +1,182 @@
 
++CONFIG_ARM=y
 
++CONFIG_POSITION_INDEPENDENT=y
 
++CONFIG_ARCH_MEDIATEK=y
 
++CONFIG_TARGET_MT7986=y
 
++CONFIG_TEXT_BASE=0x41e00000
 
++CONFIG_SYS_MALLOC_F_LEN=0x4000
 
++CONFIG_SYS_HAS_NONCACHED_MEMORY=y
 
++CONFIG_NR_DRAM_BANKS=1
 
++CONFIG_DEFAULT_DEVICE_TREE="mt7986a-tplink-tl-xdr608x"
 
++CONFIG_DEFAULT_ENV_FILE="tplink_tl-xdr4288_env"
 
++CONFIG_DEFAULT_FDT_FILE="mediatek/mt7986a-tplink-tl-xdr608x.dtb"
 
++CONFIG_OF_LIBFDT_OVERLAY=y
 
++CONFIG_DEBUG_UART_BASE=0x11002000
 
++CONFIG_DEBUG_UART_CLOCK=40000000
 
++CONFIG_DEBUG_UART=y
 
++CONFIG_SYS_LOAD_ADDR=0x46000000
 
++CONFIG_SMBIOS_PRODUCT_NAME=""
 
++CONFIG_AUTOBOOT_KEYED=y
 
++CONFIG_BOOTDELAY=30
 
++CONFIG_AUTOBOOT_MENU_SHOW=y
 
++CONFIG_CFB_CONSOLE_ANSI=y
 
++CONFIG_BOARD_LATE_INIT=y
 
++CONFIG_BUTTON=y
 
++CONFIG_BUTTON_GPIO=y
 
++CONFIG_GPIO_HOG=y
 
++CONFIG_CMD_ENV_FLAGS=y
 
++CONFIG_FIT=y
 
++CONFIG_FIT_ENABLE_SHA256_SUPPORT=y
 
++CONFIG_LED=y
 
++CONFIG_LED_BLINK=y
 
++CONFIG_LED_GPIO=y
 
++CONFIG_LOGLEVEL=7
 
++CONFIG_LOG=y
 
++CONFIG_SYS_PROMPT="MT7986> "
 
++CONFIG_CMD_BOOTMENU=y
 
++CONFIG_CMD_BOOTP=y
 
++CONFIG_CMD_BUTTON=y
 
++CONFIG_CMD_CACHE=y
 
++CONFIG_CMD_CDP=y
 
++CONFIG_CMD_CPU=y
 
++CONFIG_CMD_DHCP=y
 
++CONFIG_CMD_DM=y
 
++CONFIG_CMD_DNS=y
 
++CONFIG_CMD_ECHO=y
 
++CONFIG_CMD_ENV_READMEM=y
 
++CONFIG_CMD_ERASEENV=y
 
++CONFIG_CMD_EXT4=y
 
++CONFIG_CMD_FAT=y
 
++CONFIG_CMD_FDT=y
 
++CONFIG_CMD_FS_GENERIC=y
 
++CONFIG_CMD_FS_UUID=y
 
++CONFIG_CMD_GPIO=y
 
++CONFIG_CMD_GPT=y
 
++CONFIG_CMD_HASH=y
 
++CONFIG_CMD_ITEST=y
 
++CONFIG_CMD_LED=y
 
++CONFIG_CMD_LICENSE=y
 
++CONFIG_CMD_LINK_LOCAL=y
 
++# CONFIG_CMD_MBR is not set
 
++CONFIG_CMD_PCI=y
 
++CONFIG_CMD_PSTORE=y
 
++CONFIG_CMD_PSTORE_MEM_ADDR=0x42ff0000
 
++CONFIG_CMD_SF_TEST=y
 
++CONFIG_CMD_PING=y
 
++CONFIG_CMD_PXE=y
 
++CONFIG_CMD_PWM=y
 
++CONFIG_CMD_SMC=y
 
++CONFIG_CMD_TFTPBOOT=y
 
++CONFIG_CMD_TFTPSRV=y
 
++CONFIG_CMD_UBI=y
 
++CONFIG_CMD_UBI_RENAME=y
 
++CONFIG_CMD_UBIFS=y
 
++CONFIG_CMD_ASKENV=y
 
++CONFIG_CMD_PART=y
 
++CONFIG_CMD_RARP=y
 
++CONFIG_CMD_SETEXPR=y
 
++CONFIG_CMD_SLEEP=y
 
++CONFIG_CMD_SNTP=y
 
++CONFIG_CMD_SOURCE=y
 
++CONFIG_CMD_STRINGS=y
 
++CONFIG_CMD_USB=y
 
++CONFIG_CMD_UUID=y
 
++CONFIG_DISPLAY_CPUINFO=y
 
++CONFIG_DM_MTD=y
 
++CONFIG_DM_REGULATOR=y
 
++CONFIG_DM_REGULATOR_FIXED=y
 
++CONFIG_DM_REGULATOR_GPIO=y
 
++CONFIG_DM_USB=y
 
++CONFIG_DM_PWM=y
 
++CONFIG_PWM_MTK=y
 
++CONFIG_HUSH_PARSER=y
 
++CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
 
++CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 
++CONFIG_VERSION_VARIABLE=y
 
++CONFIG_PARTITION_UUIDS=y
 
++CONFIG_NETCONSOLE=y
 
++CONFIG_REGMAP=y
 
++CONFIG_SYSCON=y
 
++CONFIG_CLK=y
 
++CONFIG_DM_GPIO=y
 
++CONFIG_DM_SCSI=y
 
++CONFIG_AHCI=y
 
++CONFIG_AHCI_PCI=y
 
++CONFIG_SCSI_AHCI=y
 
++CONFIG_SCSI=y
 
++CONFIG_CMD_SCSI=y
 
++CONFIG_PHY=y
 
++CONFIG_PHY_MTK_TPHY=y
 
++CONFIG_PHY_FIXED=y
 
++CONFIG_MTK_AHCI=y
 
++CONFIG_DM_ETH=y
 
++CONFIG_MEDIATEK_ETH=y
 
++CONFIG_PCI=y
 
++# CONFIG_MMC is not set
 
++# CONFIG_DM_MMC is not set
 
++CONFIG_MTD=y
 
++CONFIG_MTD_UBI_FASTMAP=y
 
++CONFIG_DM_PCI=y
 
++CONFIG_PCIE_MEDIATEK=y
 
++CONFIG_PINCTRL=y
 
++CONFIG_PINCONF=y
 
++CONFIG_PINCTRL_MT7622=y
 
++CONFIG_POWER_DOMAIN=y
 
++CONFIG_PRE_CONSOLE_BUFFER=y
 
++CONFIG_PRE_CON_BUF_ADDR=0x4007EF00
 
++CONFIG_MTK_POWER_DOMAIN=y
 
++CONFIG_RAM=y
 
++CONFIG_DM_SERIAL=y
 
++CONFIG_MTK_SERIAL=y
 
++CONFIG_SPI=y
 
++CONFIG_DM_SPI=y
 
++CONFIG_MTK_SPI_NAND=y
 
++CONFIG_MTK_SPI_NAND_MTD=y
 
++CONFIG_SYSRESET_WATCHDOG=y
 
++CONFIG_WDT_MTK=y
 
++CONFIG_LZO=y
 
++CONFIG_ZSTD=y
 
++CONFIG_HEXDUMP=y
 
++CONFIG_RANDOM_UUID=y
 
++CONFIG_REGEX=y
 
++CONFIG_USB=y
 
++CONFIG_USB_HOST=y
 
++CONFIG_USB_XHCI_HCD=y
 
++CONFIG_USB_XHCI_MTK=y
 
++CONFIG_USB_STORAGE=y
 
++CONFIG_OF_EMBED=y
 
++CONFIG_ENV_OVERWRITE=y
 
++CONFIG_ENV_IS_IN_UBI=y
 
++CONFIG_ENV_UBI_PART="ubi"
 
++CONFIG_ENV_SIZE=0x1f000
 
++CONFIG_ENV_SIZE_REDUND=0x1f000
 
++CONFIG_ENV_UBI_VOLUME="ubootenv"
 
++CONFIG_ENV_UBI_VOLUME_REDUND="ubootenv2"
 
++CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
 
++CONFIG_NET_RANDOM_ETHADDR=y
 
++CONFIG_REGMAP=y
 
++CONFIG_SYSCON=y
 
++CONFIG_CLK=y
 
++CONFIG_PHY_FIXED=y
 
++CONFIG_DM_ETH=y
 
++CONFIG_MEDIATEK_ETH=y
 
++CONFIG_PINCTRL=y
 
++CONFIG_PINCONF=y
 
++CONFIG_PINCTRL_MT7986=y
 
++CONFIG_POWER_DOMAIN=y
 
++CONFIG_MTK_POWER_DOMAIN=y
 
++CONFIG_DM_REGULATOR=y
 
++CONFIG_DM_REGULATOR_FIXED=y
 
++CONFIG_DM_SERIAL=y
 
++CONFIG_MTK_SERIAL=y
 
++CONFIG_HEXDUMP=y
 
++CONFIG_USE_DEFAULT_ENV_FILE=y
 
++CONFIG_MTD_SPI_NAND=y
 
++CONFIG_MTK_SPIM=y
 
++CONFIG_CMD_MTD=y
 
++CONFIG_CMD_NAND=y
 
++CONFIG_CMD_NAND_TRIMFFS=y
 
++CONFIG_LMB_MAX_REGIONS=64
 
++CONFIG_USE_IPADDR=y
 
++CONFIG_IPADDR="192.168.1.1"
 
++CONFIG_USE_SERVERIP=y
 
++CONFIG_SERVERIP="192.168.1.254"
 
+--- /dev/null
 
++++ b/configs/mt7986_tplink_tl-xdr6086_defconfig
 
+@@ -0,0 +1,182 @@
 
++CONFIG_ARM=y
 
++CONFIG_POSITION_INDEPENDENT=y
 
++CONFIG_ARCH_MEDIATEK=y
 
++CONFIG_TARGET_MT7986=y
 
++CONFIG_TEXT_BASE=0x41e00000
 
++CONFIG_SYS_MALLOC_F_LEN=0x4000
 
++CONFIG_SYS_HAS_NONCACHED_MEMORY=y
 
++CONFIG_NR_DRAM_BANKS=1
 
++CONFIG_DEFAULT_DEVICE_TREE="mt7986a-tplink-tl-xdr608x"
 
++CONFIG_DEFAULT_ENV_FILE="tplink_tl-xdr6086_env"
 
++CONFIG_DEFAULT_FDT_FILE="mediatek/mt7986a-tplink-tl-xdr608x.dtb"
 
++CONFIG_OF_LIBFDT_OVERLAY=y
 
++CONFIG_DEBUG_UART_BASE=0x11002000
 
++CONFIG_DEBUG_UART_CLOCK=40000000
 
++CONFIG_DEBUG_UART=y
 
++CONFIG_SYS_LOAD_ADDR=0x46000000
 
++CONFIG_SMBIOS_PRODUCT_NAME=""
 
++CONFIG_AUTOBOOT_KEYED=y
 
++CONFIG_BOOTDELAY=30
 
++CONFIG_AUTOBOOT_MENU_SHOW=y
 
++CONFIG_CFB_CONSOLE_ANSI=y
 
++CONFIG_BOARD_LATE_INIT=y
 
++CONFIG_BUTTON=y
 
++CONFIG_BUTTON_GPIO=y
 
++CONFIG_GPIO_HOG=y
 
++CONFIG_CMD_ENV_FLAGS=y
 
++CONFIG_FIT=y
 
++CONFIG_FIT_ENABLE_SHA256_SUPPORT=y
 
++CONFIG_LED=y
 
++CONFIG_LED_BLINK=y
 
++CONFIG_LED_GPIO=y
 
++CONFIG_LOGLEVEL=7
 
++CONFIG_LOG=y
 
++CONFIG_SYS_PROMPT="MT7986> "
 
++CONFIG_CMD_BOOTMENU=y
 
++CONFIG_CMD_BOOTP=y
 
++CONFIG_CMD_BUTTON=y
 
++CONFIG_CMD_CACHE=y
 
++CONFIG_CMD_CDP=y
 
++CONFIG_CMD_CPU=y
 
++CONFIG_CMD_DHCP=y
 
++CONFIG_CMD_DM=y
 
++CONFIG_CMD_DNS=y
 
++CONFIG_CMD_ECHO=y
 
++CONFIG_CMD_ENV_READMEM=y
 
++CONFIG_CMD_ERASEENV=y
 
++CONFIG_CMD_EXT4=y
 
++CONFIG_CMD_FAT=y
 
++CONFIG_CMD_FDT=y
 
++CONFIG_CMD_FS_GENERIC=y
 
++CONFIG_CMD_FS_UUID=y
 
++CONFIG_CMD_GPIO=y
 
++CONFIG_CMD_GPT=y
 
++CONFIG_CMD_HASH=y
 
++CONFIG_CMD_ITEST=y
 
++CONFIG_CMD_LED=y
 
++CONFIG_CMD_LICENSE=y
 
++CONFIG_CMD_LINK_LOCAL=y
 
++# CONFIG_CMD_MBR is not set
 
++CONFIG_CMD_PCI=y
 
++CONFIG_CMD_PSTORE=y
 
++CONFIG_CMD_PSTORE_MEM_ADDR=0x42ff0000
 
++CONFIG_CMD_SF_TEST=y
 
++CONFIG_CMD_PING=y
 
++CONFIG_CMD_PXE=y
 
++CONFIG_CMD_PWM=y
 
++CONFIG_CMD_SMC=y
 
++CONFIG_CMD_TFTPBOOT=y
 
++CONFIG_CMD_TFTPSRV=y
 
++CONFIG_CMD_UBI=y
 
++CONFIG_CMD_UBI_RENAME=y
 
++CONFIG_CMD_UBIFS=y
 
++CONFIG_CMD_ASKENV=y
 
++CONFIG_CMD_PART=y
 
++CONFIG_CMD_RARP=y
 
++CONFIG_CMD_SETEXPR=y
 
++CONFIG_CMD_SLEEP=y
 
++CONFIG_CMD_SNTP=y
 
++CONFIG_CMD_SOURCE=y
 
++CONFIG_CMD_STRINGS=y
 
++CONFIG_CMD_USB=y
 
++CONFIG_CMD_UUID=y
 
++CONFIG_DISPLAY_CPUINFO=y
 
++CONFIG_DM_MTD=y
 
++CONFIG_DM_REGULATOR=y
 
++CONFIG_DM_REGULATOR_FIXED=y
 
++CONFIG_DM_REGULATOR_GPIO=y
 
++CONFIG_DM_USB=y
 
++CONFIG_DM_PWM=y
 
++CONFIG_PWM_MTK=y
 
++CONFIG_HUSH_PARSER=y
 
++CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
 
++CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 
++CONFIG_VERSION_VARIABLE=y
 
++CONFIG_PARTITION_UUIDS=y
 
++CONFIG_NETCONSOLE=y
 
++CONFIG_REGMAP=y
 
++CONFIG_SYSCON=y
 
++CONFIG_CLK=y
 
++CONFIG_DM_GPIO=y
 
++CONFIG_DM_SCSI=y
 
++CONFIG_AHCI=y
 
++CONFIG_AHCI_PCI=y
 
++CONFIG_SCSI_AHCI=y
 
++CONFIG_SCSI=y
 
++CONFIG_CMD_SCSI=y
 
++CONFIG_PHY=y
 
++CONFIG_PHY_MTK_TPHY=y
 
++CONFIG_PHY_FIXED=y
 
++CONFIG_MTK_AHCI=y
 
++CONFIG_DM_ETH=y
 
++CONFIG_MEDIATEK_ETH=y
 
++CONFIG_PCI=y
 
++# CONFIG_MMC is not set
 
++# CONFIG_DM_MMC is not set
 
++CONFIG_MTD=y
 
++CONFIG_MTD_UBI_FASTMAP=y
 
++CONFIG_DM_PCI=y
 
++CONFIG_PCIE_MEDIATEK=y
 
++CONFIG_PINCTRL=y
 
++CONFIG_PINCONF=y
 
++CONFIG_PINCTRL_MT7622=y
 
++CONFIG_POWER_DOMAIN=y
 
++CONFIG_PRE_CONSOLE_BUFFER=y
 
++CONFIG_PRE_CON_BUF_ADDR=0x4007EF00
 
++CONFIG_MTK_POWER_DOMAIN=y
 
++CONFIG_RAM=y
 
++CONFIG_DM_SERIAL=y
 
++CONFIG_MTK_SERIAL=y
 
++CONFIG_SPI=y
 
++CONFIG_DM_SPI=y
 
++CONFIG_MTK_SPI_NAND=y
 
++CONFIG_MTK_SPI_NAND_MTD=y
 
++CONFIG_SYSRESET_WATCHDOG=y
 
++CONFIG_WDT_MTK=y
 
++CONFIG_LZO=y
 
++CONFIG_ZSTD=y
 
++CONFIG_HEXDUMP=y
 
++CONFIG_RANDOM_UUID=y
 
++CONFIG_REGEX=y
 
++CONFIG_USB=y
 
++CONFIG_USB_HOST=y
 
++CONFIG_USB_XHCI_HCD=y
 
++CONFIG_USB_XHCI_MTK=y
 
++CONFIG_USB_STORAGE=y
 
++CONFIG_OF_EMBED=y
 
++CONFIG_ENV_OVERWRITE=y
 
++CONFIG_ENV_IS_IN_UBI=y
 
++CONFIG_ENV_UBI_PART="ubi"
 
++CONFIG_ENV_SIZE=0x1f000
 
++CONFIG_ENV_SIZE_REDUND=0x1f000
 
++CONFIG_ENV_UBI_VOLUME="ubootenv"
 
++CONFIG_ENV_UBI_VOLUME_REDUND="ubootenv2"
 
++CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
 
++CONFIG_NET_RANDOM_ETHADDR=y
 
++CONFIG_REGMAP=y
 
++CONFIG_SYSCON=y
 
++CONFIG_CLK=y
 
++CONFIG_PHY_FIXED=y
 
++CONFIG_DM_ETH=y
 
++CONFIG_MEDIATEK_ETH=y
 
++CONFIG_PINCTRL=y
 
++CONFIG_PINCONF=y
 
++CONFIG_PINCTRL_MT7986=y
 
++CONFIG_POWER_DOMAIN=y
 
++CONFIG_MTK_POWER_DOMAIN=y
 
++CONFIG_DM_REGULATOR=y
 
++CONFIG_DM_REGULATOR_FIXED=y
 
++CONFIG_DM_SERIAL=y
 
++CONFIG_MTK_SERIAL=y
 
++CONFIG_HEXDUMP=y
 
++CONFIG_USE_DEFAULT_ENV_FILE=y
 
++CONFIG_MTD_SPI_NAND=y
 
++CONFIG_MTK_SPIM=y
 
++CONFIG_CMD_MTD=y
 
++CONFIG_CMD_NAND=y
 
++CONFIG_CMD_NAND_TRIMFFS=y
 
++CONFIG_LMB_MAX_REGIONS=64
 
++CONFIG_USE_IPADDR=y
 
++CONFIG_IPADDR="192.168.1.1"
 
++CONFIG_USE_SERVERIP=y
 
++CONFIG_SERVERIP="192.168.1.254"
 
+--- /dev/null
 
++++ b/configs/mt7986_tplink_tl-xdr6088_defconfig
 
+@@ -0,0 +1,182 @@
 
++CONFIG_ARM=y
 
++CONFIG_POSITION_INDEPENDENT=y
 
++CONFIG_ARCH_MEDIATEK=y
 
++CONFIG_TARGET_MT7986=y
 
++CONFIG_TEXT_BASE=0x41e00000
 
++CONFIG_SYS_HAS_NONCACHED_MEMORY=y
 
++CONFIG_SYS_MALLOC_F_LEN=0x4000
 
++CONFIG_NR_DRAM_BANKS=1
 
++CONFIG_DEFAULT_DEVICE_TREE="mt7986a-tplink-tl-xdr608x"
 
++CONFIG_DEFAULT_ENV_FILE="tplink_tl-xdr6088_env"
 
++CONFIG_DEFAULT_FDT_FILE="mediatek/mt7986a-tplink-tl-xdr608x.dtb"
 
++CONFIG_OF_LIBFDT_OVERLAY=y
 
++CONFIG_DEBUG_UART_BASE=0x11002000
 
++CONFIG_DEBUG_UART_CLOCK=40000000
 
++CONFIG_DEBUG_UART=y
 
++CONFIG_SYS_LOAD_ADDR=0x46000000
 
++CONFIG_SMBIOS_PRODUCT_NAME=""
 
++CONFIG_AUTOBOOT_KEYED=y
 
++CONFIG_BOOTDELAY=30
 
++CONFIG_AUTOBOOT_MENU_SHOW=y
 
++CONFIG_CFB_CONSOLE_ANSI=y
 
++CONFIG_BOARD_LATE_INIT=y
 
++CONFIG_BUTTON=y
 
++CONFIG_BUTTON_GPIO=y
 
++CONFIG_GPIO_HOG=y
 
++CONFIG_CMD_ENV_FLAGS=y
 
++CONFIG_FIT=y
 
++CONFIG_FIT_ENABLE_SHA256_SUPPORT=y
 
++CONFIG_LED=y
 
++CONFIG_LED_BLINK=y
 
++CONFIG_LED_GPIO=y
 
++CONFIG_LOGLEVEL=7
 
++CONFIG_LOG=y
 
++CONFIG_SYS_PROMPT="MT7986> "
 
++CONFIG_CMD_BOOTMENU=y
 
++CONFIG_CMD_BOOTP=y
 
++CONFIG_CMD_BUTTON=y
 
++CONFIG_CMD_CACHE=y
 
++CONFIG_CMD_CDP=y
 
++CONFIG_CMD_CPU=y
 
++CONFIG_CMD_DHCP=y
 
++CONFIG_CMD_DM=y
 
++CONFIG_CMD_DNS=y
 
++CONFIG_CMD_ECHO=y
 
++CONFIG_CMD_ENV_READMEM=y
 
++CONFIG_CMD_ERASEENV=y
 
++CONFIG_CMD_EXT4=y
 
++CONFIG_CMD_FAT=y
 
++CONFIG_CMD_FDT=y
 
++CONFIG_CMD_FS_GENERIC=y
 
++CONFIG_CMD_FS_UUID=y
 
++CONFIG_CMD_GPIO=y
 
++CONFIG_CMD_GPT=y
 
++CONFIG_CMD_HASH=y
 
++CONFIG_CMD_ITEST=y
 
++CONFIG_CMD_LED=y
 
++CONFIG_CMD_LICENSE=y
 
++CONFIG_CMD_LINK_LOCAL=y
 
++# CONFIG_CMD_MBR is not set
 
++CONFIG_CMD_PCI=y
 
++CONFIG_CMD_PSTORE=y
 
++CONFIG_CMD_PSTORE_MEM_ADDR=0x42ff0000
 
++CONFIG_CMD_SF_TEST=y
 
++CONFIG_CMD_PING=y
 
++CONFIG_CMD_PXE=y
 
++CONFIG_CMD_PWM=y
 
++CONFIG_CMD_SMC=y
 
++CONFIG_CMD_TFTPBOOT=y
 
++CONFIG_CMD_TFTPSRV=y
 
++CONFIG_CMD_UBI=y
 
++CONFIG_CMD_UBI_RENAME=y
 
++CONFIG_CMD_UBIFS=y
 
++CONFIG_CMD_ASKENV=y
 
++CONFIG_CMD_PART=y
 
++CONFIG_CMD_RARP=y
 
++CONFIG_CMD_SETEXPR=y
 
++CONFIG_CMD_SLEEP=y
 
++CONFIG_CMD_SNTP=y
 
++CONFIG_CMD_SOURCE=y
 
++CONFIG_CMD_STRINGS=y
 
++CONFIG_CMD_USB=y
 
++CONFIG_CMD_UUID=y
 
++CONFIG_DISPLAY_CPUINFO=y
 
++CONFIG_DM_MTD=y
 
++CONFIG_DM_REGULATOR=y
 
++CONFIG_DM_REGULATOR_FIXED=y
 
++CONFIG_DM_REGULATOR_GPIO=y
 
++CONFIG_DM_USB=y
 
++CONFIG_DM_PWM=y
 
++CONFIG_PWM_MTK=y
 
++CONFIG_HUSH_PARSER=y
 
++CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
 
++CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 
++CONFIG_VERSION_VARIABLE=y
 
++CONFIG_PARTITION_UUIDS=y
 
++CONFIG_NETCONSOLE=y
 
++CONFIG_REGMAP=y
 
++CONFIG_SYSCON=y
 
++CONFIG_CLK=y
 
++CONFIG_DM_GPIO=y
 
++CONFIG_DM_SCSI=y
 
++CONFIG_AHCI=y
 
++CONFIG_AHCI_PCI=y
 
++CONFIG_SCSI_AHCI=y
 
++CONFIG_SCSI=y
 
++CONFIG_CMD_SCSI=y
 
++CONFIG_PHY=y
 
++CONFIG_PHY_MTK_TPHY=y
 
++CONFIG_PHY_FIXED=y
 
++CONFIG_MTK_AHCI=y
 
++CONFIG_DM_ETH=y
 
++CONFIG_MEDIATEK_ETH=y
 
++CONFIG_PCI=y
 
++# CONFIG_MMC is not set
 
++# CONFIG_DM_MMC is not set
 
++CONFIG_MTD=y
 
++CONFIG_MTD_UBI_FASTMAP=y
 
++CONFIG_DM_PCI=y
 
++CONFIG_PCIE_MEDIATEK=y
 
++CONFIG_PINCTRL=y
 
++CONFIG_PINCONF=y
 
++CONFIG_PINCTRL_MT7622=y
 
++CONFIG_POWER_DOMAIN=y
 
++CONFIG_PRE_CONSOLE_BUFFER=y
 
++CONFIG_PRE_CON_BUF_ADDR=0x4007EF00
 
++CONFIG_MTK_POWER_DOMAIN=y
 
++CONFIG_RAM=y
 
++CONFIG_DM_SERIAL=y
 
++CONFIG_MTK_SERIAL=y
 
++CONFIG_SPI=y
 
++CONFIG_DM_SPI=y
 
++CONFIG_MTK_SPI_NAND=y
 
++CONFIG_MTK_SPI_NAND_MTD=y
 
++CONFIG_SYSRESET_WATCHDOG=y
 
++CONFIG_WDT_MTK=y
 
++CONFIG_LZO=y
 
++CONFIG_ZSTD=y
 
++CONFIG_HEXDUMP=y
 
++CONFIG_RANDOM_UUID=y
 
++CONFIG_REGEX=y
 
++CONFIG_USB=y
 
++CONFIG_USB_HOST=y
 
++CONFIG_USB_XHCI_HCD=y
 
++CONFIG_USB_XHCI_MTK=y
 
++CONFIG_USB_STORAGE=y
 
++CONFIG_OF_EMBED=y
 
++CONFIG_ENV_OVERWRITE=y
 
++CONFIG_ENV_IS_IN_UBI=y
 
++CONFIG_ENV_UBI_PART="ubi"
 
++CONFIG_ENV_SIZE=0x1f000
 
++CONFIG_ENV_SIZE_REDUND=0x1f000
 
++CONFIG_ENV_UBI_VOLUME="ubootenv"
 
++CONFIG_ENV_UBI_VOLUME_REDUND="ubootenv2"
 
++CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
 
++CONFIG_NET_RANDOM_ETHADDR=y
 
++CONFIG_REGMAP=y
 
++CONFIG_SYSCON=y
 
++CONFIG_CLK=y
 
++CONFIG_PHY_FIXED=y
 
++CONFIG_DM_ETH=y
 
++CONFIG_MEDIATEK_ETH=y
 
++CONFIG_PINCTRL=y
 
++CONFIG_PINCONF=y
 
++CONFIG_PINCTRL_MT7986=y
 
++CONFIG_POWER_DOMAIN=y
 
++CONFIG_MTK_POWER_DOMAIN=y
 
++CONFIG_DM_REGULATOR=y
 
++CONFIG_DM_REGULATOR_FIXED=y
 
++CONFIG_DM_SERIAL=y
 
++CONFIG_MTK_SERIAL=y
 
++CONFIG_HEXDUMP=y
 
++CONFIG_USE_DEFAULT_ENV_FILE=y
 
++CONFIG_MTD_SPI_NAND=y
 
++CONFIG_MTK_SPIM=y
 
++CONFIG_CMD_MTD=y
 
++CONFIG_CMD_NAND=y
 
++CONFIG_CMD_NAND_TRIMFFS=y
 
++CONFIG_LMB_MAX_REGIONS=64
 
++CONFIG_USE_IPADDR=y
 
++CONFIG_IPADDR="192.168.1.1"
 
++CONFIG_USE_SERVERIP=y
 
++CONFIG_SERVERIP="192.168.1.254"
 
+--- /dev/null
 
++++ b/arch/arm/dts/mt7986a-tplink-tl-xdr608x.dts
 
+@@ -0,0 +1,191 @@
 
++// SPDX-License-Identifier: GPL-2.0
 
++/*
 
++ * Copyright (c) 2021 MediaTek Inc.
 
++ * Author: Sam Shih <[email protected]>
 
++ */
 
++
 
++/dts-v1/;
 
++#include "mt7986.dtsi"
 
++#include <dt-bindings/gpio/gpio.h>
 
++#include <dt-bindings/input/linux-event-codes.h>
 
++
 
++/ {
 
++	#address-cells = <1>;
 
++	#size-cells = <1>;
 
++	model = "TP-Link TL-XDR608x";
 
++	compatible = "mediatek,mt7986", "mediatek,mt7986-rfb";
 
++
 
++	chosen {
 
++		stdout-path = &uart0;
 
++		tick-timer = &timer0;
 
++	};
 
++
 
++	keys {
 
++		compatible = "gpio-keys";
 
++
 
++		factory {
 
++			label = "reset";
 
++			linux,code = <KEY_RESTART>;
 
++			gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
 
++		};
 
++
 
++		wps {
 
++			label = "wps";
 
++			linux,code = <KEY_WPS_BUTTON>;
 
++			gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
 
++		};
 
++
 
++		turbo {
 
++			label = "turbo";
 
++			linux,code = <BTN_1>;
 
++			gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
 
++		};
 
++	};
 
++
 
++	leds {
 
++		compatible = "gpio-leds";
 
++
 
++		status_red {
 
++			label = "red:status";
 
++			gpios = <&gpio 7 GPIO_ACTIVE_HIGH>;
 
++		};
 
++
 
++		status_green {
 
++			label = "green:status";
 
++			gpios = <&gpio 8 GPIO_ACTIVE_HIGH>;
 
++		};
 
++
 
++		turbo {
 
++			label = "green:turbo";
 
++			gpios = <&gpio 12 GPIO_ACTIVE_HIGH>;
 
++		};
 
++	};
 
++};
 
++
 
++&uart0 {
 
++	mediatek,force-highspeed;
 
++	status = "okay";
 
++};
 
++
 
++&uart1 {
 
++	pinctrl-names = "default";
 
++	pinctrl-0 = <&uart1_pins>;
 
++	status = "disabled";
 
++};
 
++
 
++&eth {
 
++	status = "okay";
 
++	mediatek,gmac-id = <0>;
 
++	phy-mode = "sgmii";
 
++	mediatek,switch = "mt7531";
 
++	reset-gpios = <&gpio 5 GPIO_ACTIVE_HIGH>;
 
++
 
++	fixed-link {
 
++		speed = <1000>;
 
++		full-duplex;
 
++	};
 
++};
 
++
 
++&pinctrl {
 
++	spi_flash_pins: spi0-pins-func-1 {
 
++		mux {
 
++			function = "flash";
 
++			groups = "spi0", "spi0_wp_hold";
 
++		};
 
++
 
++		conf-pu {
 
++			pins = "SPI2_CS", "SPI2_HOLD", "SPI2_WP";
 
++			drive-strength = <MTK_DRIVE_8mA>;
 
++			bias-pull-up = <MTK_PUPD_SET_R1R0_00>;
 
++		};
 
++
 
++		conf-pd {
 
++			pins = "SPI2_CLK", "SPI2_MOSI", "SPI2_MISO";
 
++			drive-strength = <MTK_DRIVE_8mA>;
 
++			bias-pull-down = <MTK_PUPD_SET_R1R0_00>;
 
++		};
 
++	};
 
++
 
++	spic_pins: spi1-pins-func-1 {
 
++		mux {
 
++			function = "spi";
 
++			groups = "spi1_2";
 
++		};
 
++	};
 
++
 
++	uart1_pins: spi1-pins-func-3 {
 
++		mux {
 
++			function = "uart";
 
++			groups = "uart1_2";
 
++		};
 
++	};
 
++
 
++	pwm_pins: pwm0-pins-func-1 {
 
++		mux {
 
++			function = "pwm";
 
++			groups = "pwm0";
 
++		};
 
++	};
 
++};
 
++
 
++&pwm {
 
++	pinctrl-names = "default";
 
++	pinctrl-0 = <&pwm_pins>;
 
++	status = "okay";
 
++};
 
++
 
++&spi0 {
 
++	#address-cells = <1>;
 
++	#size-cells = <0>;
 
++	pinctrl-names = "default";
 
++	pinctrl-0 = <&spi_flash_pins>;
 
++	status = "okay";
 
++	must_tx;
 
++	enhance_timing;
 
++	dma_ext;
 
++	ipm_design;
 
++	support_quad;
 
++	tick_dly = <1>;
 
++	sample_sel = <0>;
 
++
 
++	spi_nand@1 {
 
++		compatible = "spi-nand";
 
++		reg = <1>;
 
++		spi-max-frequency = <52000000>;
 
++
 
++		partitions {
 
++			compatible = "fixed-partitions";
 
++			#address-cells = <1>;
 
++			#size-cells = <1>;
 
++
 
++			partition@0 {
 
++				label = "bl2";
 
++				reg = <0x0 0x80000>;
 
++			};
 
++
 
++			partition@100000 {
 
++				label = "config";
 
++				reg = <0x100000 0x60000>;
 
++			};
 
++
 
++			partition@160000 {
 
++				label = "factory";
 
++				reg = <0x160000 0x60000>;
 
++			};
 
++
 
++			partition@380000 {
 
++				label = "fip";
 
++				reg = <0x380000 0x200000>;
 
++			};
 
++
 
++			partition@580000 {
 
++				label = "ubi";
 
++				reg = <0x580000 0x7800000>;
 
++			};
 
++		};
 
++	};
 
++};
 
++
 
++&watchdog {
 
++	status = "disabled";
 
++};
 
+--- /dev/null
 
++++ b/tplink_tl-xdr4288_env
 
+@@ -0,0 +1,57 @@
 
++ethaddr_factory=mtd read config 0x40080000 0x0 0x20000 && env readmem -b ethaddr 0x4008001c 0x6 ; setenv ethaddr_factory
 
++ipaddr=192.168.1.1
 
++serverip=192.168.1.254
 
++loadaddr=0x46000000
 
++console=earlycon=uart8250,mmio32,0x11002000 console=ttyS0
 
++bootcmd=if pstore check ; then run boot_recovery ; else run boot_ubi ; fi
 
++bootconf=config-1
 
++bootdelay=0
 
++bootfile=openwrt-mediatek-filogic-tplink_tl-xdr4288-initramfs-recovery.itb
 
++bootfile_bl2=openwrt-mediatek-filogic-tplink_tl-xdr4288-preloader.bin
 
++bootfile_fip=openwrt-mediatek-filogic-tplink_tl-xdr4288-bl31-uboot.fip
 
++bootfile_upg=openwrt-mediatek-filogic-tplink_tl-xdr4288-squashfs-sysupgrade.itb
 
++bootled_pwr=green:status
 
++bootled_rec=red:status
 
++bootmenu_confirm_return=askenv - Press ENTER to return to menu ; bootmenu 60
 
++bootmenu_default=0
 
++bootmenu_delay=0
 
++bootmenu_title=      ( ( ( OpenWrt ) ) )
 
++bootmenu_0=Initialize environment.=run _firstboot
 
++bootmenu_0d=Run default boot command.=run boot_default
 
++bootmenu_1=Boot system via TFTP.=run boot_tftp ; run bootmenu_confirm_return
 
++bootmenu_2=Boot production system from NAND.=run boot_production ; run bootmenu_confirm_return
 
++bootmenu_3=Boot recovery system from NAND.=run boot_recovery ; run bootmenu_confirm_return
 
++bootmenu_4=Load production system via TFTP then write to NAND.=setenv noboot 1 ; setenv replacevol 1 ; run boot_tftp_production ; setenv noboot ; setenv replacevol ; run bootmenu_confirm_return
 
++bootmenu_5=Load recovery system via TFTP then write to NAND.=setenv noboot 1 ; setenv replacevol 1 ; run boot_tftp_recovery ; setenv noboot ; setenv replacevol ; run bootmenu_confirm_return
 
++bootmenu_6=Load BL31+U-Boot FIP via TFTP then write to NAND.=run boot_tftp_write_fip ; run bootmenu_confirm_return
 
++bootmenu_7=Load BL2 preloader via TFTP then write to NAND.=run boot_tftp_write_bl2 ; run bootmenu_confirm_return
 
++bootmenu_8=Reboot.=reset
 
++bootmenu_9=Reset all settings to factory defaults.=run reset_factory ; reset
 
++boot_first=if button reset ; then led $bootled_rec on ; run boot_tftp_recovery ; setenv flag_recover 1 ; run boot_default ; fi ; bootmenu
 
++boot_default=if env exists flag_recover ; then else run bootcmd ; fi ; run boot_recovery ; setenv replacevol 1 ; run boot_tftp_forever
 
++boot_production=led $bootled_pwr on ; run ubi_read_production && bootm $loadaddr#$bootconf ; led $bootled_pwr off
 
++boot_recovery=led $bootled_rec on ; run ubi_read_recovery && bootm $loadaddr#$bootconf ; led $bootled_rec off
 
++boot_ubi=run boot_production ; run boot_recovery ; run boot_tftp_forever
 
++boot_tftp_forever=led $bootled_rec on ; while true ; do run boot_tftp_recovery ; sleep 1 ; done
 
++boot_tftp_production=tftpboot $loadaddr $bootfile_upg && env exists replacevol && iminfo $loadaddr && run ubi_write_production ; if env exists noboot ; then else bootm $loadaddr#$bootconf ; fi
 
++boot_tftp_recovery=tftpboot $loadaddr $bootfile && env exists replacevol && iminfo $loadaddr && run ubi_write_recovery ; if env exists noboot ; then else bootm $loadaddr#$bootconf ; fi
 
++boot_tftp=tftpboot $loadaddr $bootfile && bootm $loadaddr#$bootconf
 
++boot_tftp_write_fip=tftpboot $loadaddr $bootfile_fip && run mtd_write_fip && run reset_factory
 
++boot_tftp_write_bl2=tftpboot $loadaddr $bootfile_bl2 && run mtd_write_bl2
 
++part_default=production
 
++part_recovery=recovery
 
++reset_factory=ubi part ubi ; mw $loadaddr 0x0 0x800 ; ubi write $loadaddr ubootenv 0x800 ; ubi write $loadaddr ubootenv2 0x800
 
++mtd_write_fip=mtd erase fip && mtd write fip $loadaddr
 
++mtd_write_bl2=mtd erase bl2 && mtd write bl2 $loadaddr
 
++ubi_create_env=ubi check ubootenv || ubi create ubootenv 0x100000 dynamic 0 || run ubi_format ; ubi check ubootenv2 || ubi create ubootenv2 0x100000 dynamic 1 || run ubi_format
 
++ubi_format=ubi detach ; mtd erase ubi && ubi part ubi ; reset
 
++ubi_prepare_rootfs=if ubi check rootfs_data ; then else if env exists rootfs_data_max ; then ubi create rootfs_data $rootfs_data_max dynamic || ubi create rootfs_data - dynamic ; else ubi create rootfs_data - dynamic ; fi ; fi
 
++ubi_read_production=ubi read $loadaddr fit && iminfo $loadaddr && run ubi_prepare_rootfs
 
++ubi_read_recovery=ubi check recovery && ubi read $loadaddr recovery
 
++ubi_remove_rootfs=ubi check rootfs_data && ubi remove rootfs_data
 
++ubi_write_production=ubi check fit && ubi remove fit ; run ubi_remove_rootfs ; ubi create fit $filesize dynamic 2 && ubi write $loadaddr fit $filesize
 
++ubi_write_recovery=ubi check recovery && ubi remove recovery ; run ubi_remove_rootfs ; ubi create recovery $filesize dynamic 3 && ubi write $loadaddr recovery $filesize
 
++_init_env=setenv _init_env ; run ubi_create_env ; saveenv ; saveenv
 
++_firstboot=setenv _firstboot ; run ethaddr_factory ; run _switch_to_menu ; run _init_env ; run boot_first
 
++_switch_to_menu=setenv _switch_to_menu ; setenv bootdelay 3 ; setenv bootmenu_delay 3 ; setenv bootmenu_0 $bootmenu_0d ; setenv bootmenu_0d ; run _bootmenu_update_title
 
++_bootmenu_update_title=setenv _bootmenu_update_title ; setenv bootmenu_title "$bootmenu_title       $ver"
 
+--- /dev/null
 
++++ b/tplink_tl-xdr6086_env
 
+@@ -0,0 +1,57 @@
 
++ethaddr_factory=mtd read config 0x40080000 0x0 0x20000 && env readmem -b ethaddr 0x4008001c 0x6 ; setenv ethaddr_factory
 
++ipaddr=192.168.1.1
 
++serverip=192.168.1.254
 
++loadaddr=0x46000000
 
++console=earlycon=uart8250,mmio32,0x11002000 console=ttyS0
 
++bootcmd=if pstore check ; then run boot_recovery ; else run boot_ubi ; fi
 
++bootconf=config-1
 
++bootdelay=0
 
++bootfile=openwrt-mediatek-filogic-tplink_tl-xdr6086-initramfs-recovery.itb
 
++bootfile_bl2=openwrt-mediatek-filogic-tplink_tl-xdr6086-preloader.bin
 
++bootfile_fip=openwrt-mediatek-filogic-tplink_tl-xdr6086-bl31-uboot.fip
 
++bootfile_upg=openwrt-mediatek-filogic-tplink_tl-xdr6086-squashfs-sysupgrade.itb
 
++bootled_pwr=green:status
 
++bootled_rec=red:status
 
++bootmenu_confirm_return=askenv - Press ENTER to return to menu ; bootmenu 60
 
++bootmenu_default=0
 
++bootmenu_delay=0
 
++bootmenu_title=      ( ( ( OpenWrt ) ) )
 
++bootmenu_0=Initialize environment.=run _firstboot
 
++bootmenu_0d=Run default boot command.=run boot_default
 
++bootmenu_1=Boot system via TFTP.=run boot_tftp ; run bootmenu_confirm_return
 
++bootmenu_2=Boot production system from NAND.=run boot_production ; run bootmenu_confirm_return
 
++bootmenu_3=Boot recovery system from NAND.=run boot_recovery ; run bootmenu_confirm_return
 
++bootmenu_4=Load production system via TFTP then write to NAND.=setenv noboot 1 ; setenv replacevol 1 ; run boot_tftp_production ; setenv noboot ; setenv replacevol ; run bootmenu_confirm_return
 
++bootmenu_5=Load recovery system via TFTP then write to NAND.=setenv noboot 1 ; setenv replacevol 1 ; run boot_tftp_recovery ; setenv noboot ; setenv replacevol ; run bootmenu_confirm_return
 
++bootmenu_6=Load BL31+U-Boot FIP via TFTP then write to NAND.=run boot_tftp_write_fip ; run bootmenu_confirm_return
 
++bootmenu_7=Load BL2 preloader via TFTP then write to NAND.=run boot_tftp_write_bl2 ; run bootmenu_confirm_return
 
++bootmenu_8=Reboot.=reset
 
++bootmenu_9=Reset all settings to factory defaults.=run reset_factory ; reset
 
++boot_first=if button reset ; then led $bootled_rec on ; run boot_tftp_recovery ; setenv flag_recover 1 ; run boot_default ; fi ; bootmenu
 
++boot_default=if env exists flag_recover ; then else run bootcmd ; fi ; run boot_recovery ; setenv replacevol 1 ; run boot_tftp_forever
 
++boot_production=led $bootled_pwr on ; run ubi_read_production && bootm $loadaddr#$bootconf ; led $bootled_pwr off
 
++boot_recovery=led $bootled_rec on ; run ubi_read_recovery && bootm $loadaddr#$bootconf ; led $bootled_rec off
 
++boot_ubi=run boot_production ; run boot_recovery ; run boot_tftp_forever
 
++boot_tftp_forever=led $bootled_rec on ; while true ; do run boot_tftp_recovery ; sleep 1 ; done
 
++boot_tftp_production=tftpboot $loadaddr $bootfile_upg && env exists replacevol && iminfo $loadaddr && run ubi_write_production ; if env exists noboot ; then else bootm $loadaddr#$bootconf ; fi
 
++boot_tftp_recovery=tftpboot $loadaddr $bootfile && env exists replacevol && iminfo $loadaddr && run ubi_write_recovery ; if env exists noboot ; then else bootm $loadaddr#$bootconf ; fi
 
++boot_tftp=tftpboot $loadaddr $bootfile && bootm $loadaddr#$bootconf
 
++boot_tftp_write_fip=tftpboot $loadaddr $bootfile_fip && run mtd_write_fip && run reset_factory
 
++boot_tftp_write_bl2=tftpboot $loadaddr $bootfile_bl2 && run mtd_write_bl2
 
++part_default=production
 
++part_recovery=recovery
 
++reset_factory=ubi part ubi ; mw $loadaddr 0x0 0x800 ; ubi write $loadaddr ubootenv 0x800 ; ubi write $loadaddr ubootenv2 0x800
 
++mtd_write_fip=mtd erase fip && mtd write fip $loadaddr
 
++mtd_write_bl2=mtd erase bl2 && mtd write bl2 $loadaddr
 
++ubi_create_env=ubi check ubootenv || ubi create ubootenv 0x100000 dynamic 0 || run ubi_format ; ubi check ubootenv2 || ubi create ubootenv2 0x100000 dynamic 1 || run ubi_format
 
++ubi_format=ubi detach ; mtd erase ubi && ubi part ubi ; reset
 
++ubi_prepare_rootfs=if ubi check rootfs_data ; then else if env exists rootfs_data_max ; then ubi create rootfs_data $rootfs_data_max dynamic || ubi create rootfs_data - dynamic ; else ubi create rootfs_data - dynamic ; fi ; fi
 
++ubi_read_production=ubi read $loadaddr fit && iminfo $loadaddr && run ubi_prepare_rootfs
 
++ubi_read_recovery=ubi check recovery && ubi read $loadaddr recovery
 
++ubi_remove_rootfs=ubi check rootfs_data && ubi remove rootfs_data
 
++ubi_write_production=ubi check fit && ubi remove fit ; run ubi_remove_rootfs ; ubi create fit $filesize dynamic 2 && ubi write $loadaddr fit $filesize
 
++ubi_write_recovery=ubi check recovery && ubi remove recovery ; run ubi_remove_rootfs ; ubi create recovery $filesize dynamic 3 && ubi write $loadaddr recovery $filesize
 
++_init_env=setenv _init_env ; run ubi_create_env ; saveenv ; saveenv
 
++_firstboot=setenv _firstboot ; run ethaddr_factory ; run _switch_to_menu ; run _init_env ; run boot_first
 
++_switch_to_menu=setenv _switch_to_menu ; setenv bootdelay 3 ; setenv bootmenu_delay 3 ; setenv bootmenu_0 $bootmenu_0d ; setenv bootmenu_0d ; run _bootmenu_update_title
 
++_bootmenu_update_title=setenv _bootmenu_update_title ; setenv bootmenu_title "$bootmenu_title       $ver"
 
+--- /dev/null
 
++++ b/tplink_tl-xdr6088_env
 
+@@ -0,0 +1,57 @@
 
++ethaddr_factory=mtd read config 0x40080000 0x0 0x20000 && env readmem -b ethaddr 0x4008001c 0x6 ; setenv ethaddr_factory
 
++ipaddr=192.168.1.1
 
++serverip=192.168.1.254
 
++loadaddr=0x46000000
 
++console=earlycon=uart8250,mmio32,0x11002000 console=ttyS0
 
++bootcmd=if pstore check ; then run boot_recovery ; else run boot_ubi ; fi
 
++bootconf=config-1
 
++bootdelay=0
 
++bootfile=openwrt-mediatek-filogic-tplink_tl-xdr6088-initramfs-recovery.itb
 
++bootfile_bl2=openwrt-mediatek-filogic-tplink_tl-xdr6088-preloader.bin
 
++bootfile_fip=openwrt-mediatek-filogic-tplink_tl-xdr6088-bl31-uboot.fip
 
++bootfile_upg=openwrt-mediatek-filogic-tplink_tl-xdr6088-squashfs-sysupgrade.itb
 
++bootled_pwr=green:status
 
++bootled_rec=red:status
 
++bootmenu_confirm_return=askenv - Press ENTER to return to menu ; bootmenu 60
 
++bootmenu_default=0
 
++bootmenu_delay=0
 
++bootmenu_title=      ( ( ( OpenWrt ) ) )
 
++bootmenu_0=Initialize environment.=run _firstboot
 
++bootmenu_0d=Run default boot command.=run boot_default
 
++bootmenu_1=Boot system via TFTP.=run boot_tftp ; run bootmenu_confirm_return
 
++bootmenu_2=Boot production system from NAND.=run boot_production ; run bootmenu_confirm_return
 
++bootmenu_3=Boot recovery system from NAND.=run boot_recovery ; run bootmenu_confirm_return
 
++bootmenu_4=Load production system via TFTP then write to NAND.=setenv noboot 1 ; setenv replacevol 1 ; run boot_tftp_production ; setenv noboot ; setenv replacevol ; run bootmenu_confirm_return
 
++bootmenu_5=Load recovery system via TFTP then write to NAND.=setenv noboot 1 ; setenv replacevol 1 ; run boot_tftp_recovery ; setenv noboot ; setenv replacevol ; run bootmenu_confirm_return
 
++bootmenu_6=Load BL31+U-Boot FIP via TFTP then write to NAND.=run boot_tftp_write_fip ; run bootmenu_confirm_return
 
++bootmenu_7=Load BL2 preloader via TFTP then write to NAND.=run boot_tftp_write_bl2 ; run bootmenu_confirm_return
 
++bootmenu_8=Reboot.=reset
 
++bootmenu_9=Reset all settings to factory defaults.=run reset_factory ; reset
 
++boot_first=if button reset ; then led $bootled_rec on ; run boot_tftp_recovery ; setenv flag_recover 1 ; run boot_default ; fi ; bootmenu
 
++boot_default=if env exists flag_recover ; then else run bootcmd ; fi ; run boot_recovery ; setenv replacevol 1 ; run boot_tftp_forever
 
++boot_production=led $bootled_pwr on ; run ubi_read_production && bootm $loadaddr#$bootconf ; led $bootled_pwr off
 
++boot_recovery=led $bootled_rec on ; run ubi_read_recovery && bootm $loadaddr#$bootconf ; led $bootled_rec off
 
++boot_ubi=run boot_production ; run boot_recovery ; run boot_tftp_forever
 
++boot_tftp_forever=led $bootled_rec on ; while true ; do run boot_tftp_recovery ; sleep 1 ; done
 
++boot_tftp_production=tftpboot $loadaddr $bootfile_upg && env exists replacevol && iminfo $loadaddr && run ubi_write_production ; if env exists noboot ; then else bootm $loadaddr#$bootconf ; fi
 
++boot_tftp_recovery=tftpboot $loadaddr $bootfile && env exists replacevol && iminfo $loadaddr && run ubi_write_recovery ; if env exists noboot ; then else bootm $loadaddr#$bootconf ; fi
 
++boot_tftp=tftpboot $loadaddr $bootfile && bootm $loadaddr#$bootconf
 
++boot_tftp_write_fip=tftpboot $loadaddr $bootfile_fip && run mtd_write_fip && run reset_factory
 
++boot_tftp_write_bl2=tftpboot $loadaddr $bootfile_bl2 && run mtd_write_bl2
 
++part_default=production
 
++part_recovery=recovery
 
++reset_factory=ubi part ubi ; mw $loadaddr 0x0 0x800 ; ubi write $loadaddr ubootenv 0x800 ; ubi write $loadaddr ubootenv2 0x800
 
++mtd_write_fip=mtd erase fip && mtd write fip $loadaddr
 
++mtd_write_bl2=mtd erase bl2 && mtd write bl2 $loadaddr
 
++ubi_create_env=ubi check ubootenv || ubi create ubootenv 0x100000 dynamic 0 || run ubi_format ; ubi check ubootenv2 || ubi create ubootenv2 0x100000 dynamic 1 || run ubi_format
 
++ubi_format=ubi detach ; mtd erase ubi && ubi part ubi ; reset
 
++ubi_prepare_rootfs=if ubi check rootfs_data ; then else if env exists rootfs_data_max ; then ubi create rootfs_data $rootfs_data_max dynamic || ubi create rootfs_data - dynamic ; else ubi create rootfs_data - dynamic ; fi ; fi
 
++ubi_read_production=ubi read $loadaddr fit && iminfo $loadaddr && run ubi_prepare_rootfs
 
++ubi_read_recovery=ubi check recovery && ubi read $loadaddr recovery
 
++ubi_remove_rootfs=ubi check rootfs_data && ubi remove rootfs_data
 
++ubi_write_production=ubi check fit && ubi remove fit ; run ubi_remove_rootfs ; ubi create fit $filesize dynamic 2 && ubi write $loadaddr fit $filesize
 
++ubi_write_recovery=ubi check recovery && ubi remove recovery ; run ubi_remove_rootfs ; ubi create recovery $filesize dynamic 3 && ubi write $loadaddr recovery $filesize
 
++_init_env=setenv _init_env ; run ubi_create_env ; saveenv ; saveenv
 
++_firstboot=setenv _firstboot ; run ethaddr_factory ; run _switch_to_menu ; run _init_env ; run boot_first
 
++_switch_to_menu=setenv _switch_to_menu ; setenv bootdelay 3 ; setenv bootmenu_delay 3 ; setenv bootmenu_0 $bootmenu_0d ; setenv bootmenu_0d ; run _bootmenu_update_title
 
++_bootmenu_update_title=setenv _bootmenu_update_title ; setenv bootmenu_title "$bootmenu_title       $ver"