move most of the x86 image generation options to the main file

Signed-off-by: Imre Kaloz <[email protected]>

SVN-Revision: 39206

config/Config-images.in

@@ -133,17 +133,96 @@ menu "Target Images"
 			prompt "journal size" if TARGET_ROOTFS_UBIFS
 			default ""
 
+	config GRUB_IMAGES
+		bool "Build GRUB images (Linux x86 or x86_64 host only)"
+		depends on TARGET_x86 && !(TARGET_x86_olpc || TARGET_x86_rdc)
+		depends on TARGET_ROOTFS_EXT4FS || TARGET_ROOTFS_ISO || TARGET_ROOTFS_JFFS2 || TARGET_ROOTFS_SQUASHFS
+		select PACKAGE_grub2
+		default y
+
+	config GRUB_CONSOLE
+		bool "Use Console Terminal (in addition to Serial)"
+		depends on GRUB_IMAGES
+		default n if (TARGET_x86_generic_Soekris45xx || TARGET_x86_generic_Soekris48xx || TARGET_x86_net5501 || TARGET_x86_geos || TARGET_x86_alix2)
+		default y
+
+	config GRUB_SERIAL
+		string "Serial port device"
+		depends on GRUB_IMAGES
+		default "hvc0" if TARGET_x86_xen_domu
+		default "ttyS0" if ! TARGET_x86_xen_domu
+
+	config GRUB_BAUDRATE
+		int "Serial port baud rate"
+		depends on GRUB_IMAGES
+		default 19200 if TARGET_x86_generic_Soekris45xx || TARGET_x86_generic_Soekris48xx || TARGET_x86_net5501
+		default 38400 if TARGET_x86_alix2
+		default 115200 if TARGET_x86_geos || TARGET_x86_kvm_guest
+		default 38400
+
+	config GRUB_BOOTOPTS
+		string "Extra kernel boot options"
+		depends on GRUB_IMAGES
+		default "xencons=hvc" if TARGET_x86_xen_domu
+		help
+		  If you don't know, just leave it blank.
+
+	config GRUB_TIMEOUT
+		string "Seconds to wait before booting the default entry"
+		depends on GRUB_IMAGES
+		default "5"
+		help
+		  If you don't know, 5 seconds is a reasonable default.
+
+	config VDI_IMAGES
+		bool "Build VirtualBox image files (VDI)"
+		depends on TARGET_x86
+		select GRUB_IMAGES
+		select TARGET_ROOTFS_EXT4FS
+		select PACKAGE_kmod-pcnet32
+
+	config VMDK_IMAGES
+		bool "Build VMware image files (VMDK)"
+		depends on TARGET_x86
+		select GRUB_IMAGES
+		select TARGET_ROOTFS_EXT4FS
+		select PACKAGE_kmod-e1000
+
+	config TARGET_IMAGES_PAD
+		bool "Pad images to filesystem size (for JFFS2)"
+		depends on OLPC_BOOTSCRIPT_IMAGES || GRUB_IMAGES
+
+	config TARGET_IMAGES_GZIP
+		bool "GZip images"
+		depends on TARGET_IMAGES_PAD || TARGET_ROOTFS_EXT4FS
+		default y
+
 	comment "Image Options"
 
 	source "target/linux/*/image/Config.in"
 
+	config TARGET_KERNEL_PARTSIZE
+		int "Kernel partition size (in MB)"
+		depends on OLPC_BOOTSCRIPT_IMAGES || GRUB_IMAGES
+		default 4
+
 	config TARGET_ROOTFS_PARTSIZE
 		int "Root filesystem partition size (in MB)"
-		depends on X86_GRUB_IMAGES || TARGET_ROOTFS_EXT4FS || TARGET_rb532
+		depends on GRUB_IMAGES || TARGET_ROOTFS_EXT4FS || TARGET_rb532
 		default 48
 		help
 		  Allows you to change the root filesystem partition size
 
+	config TARGET_ROOTFS_PARTNAME
+		string "Root partition on target device"
+		depends on OLPC_BOOTSCRIPT_IMAGES || GRUB_IMAGES
+		default "/dev/vda2" if TARGET_x86_kvm_guest
+		default "/dev/xvda2" if TARGET_x86_xen_domu
+		default "/dev/sda2" if ! (TARGET_x86_kvm_guest || TARGET_x86_xen_domu)
+		help
+		  The root partition on the final device.  If you don't know,
+		  you probably want the default (/dev/sda2).
+
 	config TARGET_ROOTFS_MAXINODE
 		int "Maximum number of inodes in root filesystem"
 		depends on TARGET_ROOTFS_EXT4FS

target/linux/x86/image/Config.in

@@ -13,89 +13,8 @@ config X86_ETHERBOOT_BOOTOPTS
 	help
 	  Kernel arguments to pass to the kernel eg. NFS root location etc.
 
-config X86_GRUB_IMAGES
-	bool "Build GRUB images (Linux x86 or x86_64 host only)"
-	depends on TARGET_x86 && !(TARGET_x86_olpc || TARGET_x86_rdc)
-	depends on TARGET_ROOTFS_EXT4FS || TARGET_ROOTFS_ISO || TARGET_ROOTFS_JFFS2 || TARGET_ROOTFS_SQUASHFS
-	select PACKAGE_grub2
-	default y
-
-config X86_GRUB_CONSOLE
-	bool "Use Console Terminal (in addition to Serial)"
-	depends on X86_GRUB_IMAGES
-	default n if (TARGET_x86_generic_Soekris45xx || TARGET_x86_generic_Soekris48xx || TARGET_x86_net5501 || TARGET_x86_geos || TARGET_x86_alix2)
-	default y
-
-config X86_GRUB_SERIAL
-	string "Serial port device"
-	depends on X86_GRUB_IMAGES
-	default "hvc0" if TARGET_x86_xen_domu
-	default "ttyS0" if ! TARGET_x86_xen_domu
-
-config X86_GRUB_BAUDRATE
-	int "Serial port baud rate"
-	depends on X86_GRUB_IMAGES
-	default 19200 if TARGET_x86_generic_Soekris45xx || TARGET_x86_generic_Soekris48xx || TARGET_x86_net5501
-	default 38400 if TARGET_x86_alix2
-	default 115200 if TARGET_x86_geos || TARGET_x86_kvm_guest
-	default 38400
-
-config X86_GRUB_BOOTOPTS
-	string "Extra kernel boot options"
-	depends on X86_GRUB_IMAGES
-	default "xencons=hvc" if TARGET_x86_xen_domu
-	help
-	  If you don't know, just leave it blank.
-
-config X86_GRUB_TIMEOUT
-	string "Seconds to wait before booting the default entry"
-	depends on X86_GRUB_IMAGES
-	default "5"
-	help
-	  If you don't know, 5 seconds is a reasonable default.
-
-config X86_VDI_IMAGES
-	bool "Build VirtualBox image files (VDI)"
-	depends on TARGET_x86
-	select X86_GRUB_IMAGES
-	select TARGET_ROOTFS_EXT4FS
-	select PACKAGE_kmod-pcnet32
-
-config X86_VMDK_IMAGES
-	bool "Build VMware image files (VMDK)"
-	depends on TARGET_x86
-	select X86_GRUB_IMAGES
-	select TARGET_ROOTFS_EXT4FS
-	select PACKAGE_kmod-e1000
-
-
 config OLPC_BOOTSCRIPT_IMAGES
 	bool "Build images with bootscript"
 	depends on TARGET_x86_olpc
 	depends on TARGET_ROOTFS_EXT4FS || TARGET_ROOTFS_ISO || TARGET_ROOTFS_JFFS2 || TARGET_ROOTFS_SQUASHFS
 	default TARGET_x86_olpc
-
-
-config TARGET_IMAGES_PAD
-	bool "Pad images to filesystem size (for JFFS2)"
-	depends on OLPC_BOOTSCRIPT_IMAGES || X86_GRUB_IMAGES
-
-config TARGET_IMAGES_GZIP
-	bool "GZip images"
-	depends on TARGET_IMAGES_PAD || TARGET_ROOTFS_EXT4FS
-	default y
-
-config TARGET_KERNEL_PARTSIZE
-	int "Kernel partition size (in MB)"
-	depends on OLPC_BOOTSCRIPT_IMAGES || X86_GRUB_IMAGES
-	default 4
-
-config TARGET_ROOTFS_PARTNAME
-	string "Root partition on target device"
-	depends on OLPC_BOOTSCRIPT_IMAGES || X86_GRUB_IMAGES
-	default "/dev/vda2" if TARGET_x86_kvm_guest
-	default "/dev/xvda2" if TARGET_x86_xen_domu
-	default "/dev/sda2" if ! (TARGET_x86_kvm_guest || TARGET_x86_xen_domu)
-	help
-	  The root partition on the final device.  If you don't know,
-	  you probably want the default (/dev/sda2).

target/linux/x86/image/Makefile

@@ -23,16 +23,16 @@ ifneq ($(strip $(foreach subtarget,$(USE_ATKBD),$(CONFIG_TARGET_x86_$(subtarget)
   GRUB2_MODULES_ISO += at_keyboard
 endif
 
-ifneq ($(CONFIG_X86_GRUB_CONSOLE),)
+ifneq ($(CONFIG_GRUB_CONSOLE),)
   GRUB_CONSOLE_CMDLINE += console=tty0
   GRUB_TERMINALS += console
 endif
 
-GRUB_SERIAL:=$(call qstrip,$(CONFIG_X86_GRUB_SERIAL))
+GRUB_SERIAL:=$(call qstrip,$(CONFIG_GRUB_SERIAL))
 
 ifneq ($(GRUB_SERIAL),)
-  GRUB_CONSOLE_CMDLINE += console=$(GRUB_SERIAL),$(CONFIG_X86_GRUB_BAUDRATE)n8
-  GRUB_SERIAL_CONFIG := serial --unit=0 --speed=$(CONFIG_X86_GRUB_BAUDRATE) --word=8 --parity=no --stop=1
+  GRUB_CONSOLE_CMDLINE += console=$(GRUB_SERIAL),$(CONFIG_GRUB_BAUDRATE)n8
+  GRUB_SERIAL_CONFIG := serial --unit=0 --speed=$(CONFIG_GRUB_BAUDRATE) --word=8 --parity=no --stop=1
   GRUB_TERMINALS += serial
 endif
 
@@ -42,11 +42,11 @@ endif
 
 ROOTPART:=$(call qstrip,$(CONFIG_TARGET_ROOTFS_PARTNAME))
 
-GRUB_TIMEOUT:=$(call qstrip,$(CONFIG_X86_GRUB_TIMEOUT))
+GRUB_TIMEOUT:=$(call qstrip,$(CONFIG_GRUB_TIMEOUT))
 
-ifneq ($(CONFIG_X86_GRUB_IMAGES),)
+ifneq ($(CONFIG_GRUB_IMAGES),)
 
-  BOOTOPTS:=$(call qstrip,$(CONFIG_X86_GRUB_BOOTOPTS))
+  BOOTOPTS:=$(call qstrip,$(CONFIG_GRUB_BOOTOPTS))
 
   define Image/cmdline/ext4
     root=$(ROOTPART) rootfstype=ext4 rootwait
@@ -158,7 +158,7 @@ define Image/Build/iso
 		-o $(KDIR)/root.iso $(KDIR)/root.grub $(TARGET_DIR)
 endef
 
-ifneq ($(CONFIG_X86_VDI_IMAGES),)
+ifneq ($(CONFIG_VDI_IMAGES),)
   define Image/Build/vdi
     # left here because the image builder doesnt need these
     ifeq ($(1),ext4)
@@ -172,7 +172,7 @@ ifneq ($(CONFIG_X86_VDI_IMAGES),)
   endef
 endif
 
-ifneq ($(CONFIG_X86_VMDK_IMAGES),)
+ifneq ($(CONFIG_VMDK_IMAGES),)
   define Image/Build/vmdk
     # left here because the image builder doesnt need these
     ifeq ($(1),ext4)