mediatek: filogic: bpi-r4: set netdev-name for sfp ports

Sets openwrt,netdev-name for the gmac nodes in the dts of BPI-R4 which
correspond to the two sfp slots. By default they are automatically
named as eth1 and eth2 in bad order, however 'SFP1-WAN' and 'SFP2-LAN'
are printed on the PCB and the official metal case has labels 'SFP-WAN'
and 'SFP-LAN'. Thus, label the ports accordingly to match the
board/case labels.
The COMPAT_VERSION is increased to denote that configuration has to be
adjusted manually.

Signed-off-by: Jonas Jelonek <[email protected]>

target/linux/mediatek/files-6.6/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-poe.dts

@@ -17,6 +17,7 @@
 	phy-connection-type = "internal";
 	phy = <&int_2p5g_phy>;
 	status = "okay";
+	openwrt,netdev-name = "lan4";
 };
 
 &int_2p5g_phy {

target/linux/mediatek/files-6.6/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4.dts

@@ -29,6 +29,7 @@
 	managed = "in-band-status";
 	phy-mode = "usxgmii";
 	status = "okay";
+	openwrt,netdev-name = "sfp-lan";
 };
 
 &pca9545 {

target/linux/mediatek/files-6.6/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4.dtsi

@@ -90,6 +90,7 @@
 	managed = "in-band-status";
 	phy-mode = "usxgmii";
 	status = "okay";
+	openwrt,netdev-name = "sfp-wan";
 };
 
 &switch {

target/linux/mediatek/filogic/base-files/etc/board.d/02_network

@@ -65,9 +65,11 @@ mediatek_setup_interfaces()
 	edgecore,eap111)
 		ucidef_set_interfaces_lan_wan eth0 eth1
 		;;
-	bananapi,bpi-r4|\
+	bananapi,bpi-r4)
+		ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 sfp-lan" "wan sfp-wan"
+		;;
 	bananapi,bpi-r4-poe)
-		ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 eth1" "wan eth2"
+		ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" "wan sfp-wan"
 		;;
 	comfast,cf-e393ax)
 		ucidef_set_interfaces_lan_wan "lan1" eth1

target/linux/mediatek/filogic/base-files/etc/board.d/05_compat-version

@@ -11,6 +11,10 @@ case "$(board_name)" in
 	routerich,ax3000)
 		ucidef_set_compat_version "1.1"
 		;;
+	bananapi,bpi-r4|\
+	bananapi,bpi-r4-poe)
+		ucidef_set_compat_version "1.1"
+		;;
 esac
 
 board_config_flush

target/linux/mediatek/image/filogic.mk

@@ -433,6 +433,8 @@ define Device/bananapi_bpi-r4-common
   DEVICE_DTC_FLAGS := --pad 4096
   DEVICE_PACKAGES := kmod-hwmon-pwmfan kmod-i2c-mux-pca954x kmod-eeprom-at24 kmod-mt7996-firmware kmod-mt7996-233-firmware \
 		     kmod-rtc-pcf8563 kmod-sfp kmod-usb3 e2fsprogs f2fsck mkf2fs mt7988-wo-firmware
+  DEVICE_COMPAT_VERSION := 1.1
+  DEVICE_COMPAT_MESSAGE := The non-switch ports were renamed to match the board/case labels
   IMAGES := sysupgrade.itb
   KERNEL_LOADADDR := 0x46000000
   KERNEL_INITRAMFS_SUFFIX := -recovery.itb