kernel/4.3: update to version 4.3.3

Signed-off-by: Hauke Mehrtens <[email protected]

SVN-Revision: 48224

include/kernel-version.mk

@@ -4,12 +4,12 @@ LINUX_RELEASE?=1
 
 LINUX_VERSION-3.18 = .23
 LINUX_VERSION-4.1 = .15
-LINUX_VERSION-4.3 =
+LINUX_VERSION-4.3 = .3
 LINUX_VERSION-4.4 =
 
 LINUX_KERNEL_MD5SUM-3.18.23 = dc6d265ab38716be3676ac294b481ad8
 LINUX_KERNEL_MD5SUM-4.1.15 = b227333912b161c96ff3e30f5041e1c0
-LINUX_KERNEL_MD5SUM-4.3 = 58b35794eee3b6d52ce7be39357801e7
+LINUX_KERNEL_MD5SUM-4.3.3 = f3068333fa524ff98914cf751d0b5710
 LINUX_KERNEL_MD5SUM-4.4 = 9a78fa2eb6c68ca5a40ed5af08142599
 
 ifdef KERNEL_PATCHVER

target/linux/arc770/patches-4.3/0001-openwrt-arc-remove-dependency-on-DEVTMPFS.patch

@@ -18,11 +18,9 @@ Signed-off-by: Alexey Brodkin <[email protected]>
  arch/arc/Kconfig | 2 --
  1 file changed, 2 deletions(-)
 
-diff --git a/arch/arc/Kconfig b/arch/arc/Kconfig
-index cf96ef2..f0c6d4c 100644
 --- a/arch/arc/Kconfig
 +++ b/arch/arc/Kconfig
-@@ -11,8 +11,6 @@ config ARC
+@@ -12,8 +12,6 @@ config ARC
  	select BUILDTIME_EXTABLE_SORT
  	select COMMON_CLK
  	select CLONE_BACKWARDS
@@ -31,6 +29,3 @@ index cf96ef2..f0c6d4c 100644
  	select GENERIC_ATOMIC64
  	select GENERIC_CLOCKEVENTS
  	select GENERIC_FIND_FIRST_BIT
--- 
-2.4.3
-

target/linux/arc770/patches-4.3/0002-openwrt-arc-add-OWRTDTB-section.patch

@@ -19,8 +19,6 @@ Signed-off-by: Alexey Brodkin <[email protected]>
  arch/arc/kernel/vmlinux.lds.S | 13 +++++++++++++
  3 files changed, 26 insertions(+), 1 deletion(-)
 
-diff --git a/arch/arc/kernel/head.S b/arch/arc/kernel/head.S
-index 689dd86..51154ae 100644
 --- a/arch/arc/kernel/head.S
 +++ b/arch/arc/kernel/head.S
 @@ -49,6 +49,16 @@
@@ -38,13 +36,11 @@ index 689dd86..51154ae 100644
 +END(__image_dtb)
 +
  	.section .init.text, "ax",@progbits
- 
- ;----------------------------------------------------------------
-diff --git a/arch/arc/kernel/setup.c b/arch/arc/kernel/setup.c
-index c33e77c..96fbfd0 100644
+ 	.type stext, @function
+ 	.globl stext
 --- a/arch/arc/kernel/setup.c
 +++ b/arch/arc/kernel/setup.c
-@@ -370,6 +370,8 @@ static inline int is_kernel(unsigned long addr)
+@@ -374,6 +374,8 @@ static inline int is_kernel(unsigned lon
  	return 0;
  }
  
@@ -53,7 +49,7 @@ index c33e77c..96fbfd0 100644
  void __init setup_arch(char **cmdline_p)
  {
  #ifdef CONFIG_ARC_UBOOT_SUPPORT
-@@ -383,7 +385,7 @@ void __init setup_arch(char **cmdline_p)
+@@ -387,7 +389,7 @@ void __init setup_arch(char **cmdline_p)
  #endif
  	{
  		/* No, so try the embedded one */
@@ -62,8 +58,6 @@ index c33e77c..96fbfd0 100644
  		if (!machine_desc)
  			panic("Embedded DT invalid\n");
  
-diff --git a/arch/arc/kernel/vmlinux.lds.S b/arch/arc/kernel/vmlinux.lds.S
-index dd35bde..f309104 100644
 --- a/arch/arc/kernel/vmlinux.lds.S
 +++ b/arch/arc/kernel/vmlinux.lds.S
 @@ -30,6 +30,19 @@ SECTIONS
@@ -86,6 +80,3 @@ index dd35bde..f309104 100644
  	_int_vec_base_lds = .;
  	.vector : {
  		*(.vector)
--- 
-2.4.3
-

target/linux/bcm53xx/patches-4.3/043-clk-iproc-Fix-PLL-output-frequency-calculation.patch

@@ -1,59 +0,0 @@
-From 63243a4da7d0dfa19dcacd0a529782eeb2f86f92 Mon Sep 17 00:00:00 2001
-From: Simran Rai <[email protected]>
-Date: Mon, 19 Oct 2015 15:27:19 -0700
-Subject: [PATCH] clk: iproc: Fix PLL output frequency calculation
-
-This patch affects the clocks that use fractional ndivider in their
-PLL output frequency calculation. Instead of 2^20 divide factor, the
-clock's ndiv integer shift was used. Fixed the bug by replacing ndiv
-integer shift with 2^20 factor.
-
-Signed-off-by: Simran Rai <[email protected]>
-Signed-off-by: Ray Jui <[email protected]>
-Reviewed-by: Scott Branden <[email protected]>
-Fixes: 5fe225c105fd ("clk: iproc: add initial common clock support")
-Cc: <[email protected]> # v4.1+
-Signed-off-by: Michael Turquette <[email protected]>
----
- drivers/clk/bcm/clk-iproc-pll.c | 13 +++++--------
- 1 file changed, 5 insertions(+), 8 deletions(-)
-
---- a/drivers/clk/bcm/clk-iproc-pll.c
-+++ b/drivers/clk/bcm/clk-iproc-pll.c
-@@ -345,8 +345,8 @@ static unsigned long iproc_pll_recalc_ra
- 	struct iproc_pll *pll = clk->pll;
- 	const struct iproc_pll_ctrl *ctrl = pll->ctrl;
- 	u32 val;
--	u64 ndiv;
--	unsigned int ndiv_int, ndiv_frac, pdiv;
-+	u64 ndiv, ndiv_int, ndiv_frac;
-+	unsigned int pdiv;
- 
- 	if (parent_rate == 0)
- 		return 0;
-@@ -366,22 +366,19 @@ static unsigned long iproc_pll_recalc_ra
- 	val = readl(pll->pll_base + ctrl->ndiv_int.offset);
- 	ndiv_int = (val >> ctrl->ndiv_int.shift) &
- 		bit_mask(ctrl->ndiv_int.width);
--	ndiv = (u64)ndiv_int << ctrl->ndiv_int.shift;
-+	ndiv = ndiv_int << 20;
- 
- 	if (ctrl->flags & IPROC_CLK_PLL_HAS_NDIV_FRAC) {
- 		val = readl(pll->pll_base + ctrl->ndiv_frac.offset);
- 		ndiv_frac = (val >> ctrl->ndiv_frac.shift) &
- 			bit_mask(ctrl->ndiv_frac.width);
--
--		if (ndiv_frac != 0)
--			ndiv = ((u64)ndiv_int << ctrl->ndiv_int.shift) |
--				ndiv_frac;
-+		ndiv += ndiv_frac;
- 	}
- 
- 	val = readl(pll->pll_base + ctrl->pdiv.offset);
- 	pdiv = (val >> ctrl->pdiv.shift) & bit_mask(ctrl->pdiv.width);
- 
--	clk->rate = (ndiv * parent_rate) >> ctrl->ndiv_int.shift;
-+	clk->rate = (ndiv * parent_rate) >> 20;
- 
- 	if (pdiv == 0)
- 		clk->rate *= 2;

target/linux/bcm53xx/patches-4.3/191-usb-xhci-add-Broadcom-specific-fake-doorbell.patch

@@ -74,7 +74,7 @@ Signed-off-by: Hauke Mehrtens <[email protected]>
  /*
   * Set the run bit and wait for the host to be running.
   */
-@@ -557,10 +590,25 @@ int xhci_init(struct usb_hcd *hcd)
+@@ -567,10 +600,25 @@ int xhci_init(struct usb_hcd *hcd)
  
  static int xhci_run_finished(struct xhci_hcd *xhci)
  {
@@ -103,7 +103,7 @@ Signed-off-by: Hauke Mehrtens <[email protected]>
  	xhci->shared_hcd->state = HC_STATE_RUNNING;
  	xhci->cmd_ring_state = CMD_RING_STATE_RUNNING;
  
-@@ -570,6 +618,9 @@ static int xhci_run_finished(struct xhci
+@@ -580,6 +628,9 @@ static int xhci_run_finished(struct xhci
  	xhci_dbg_trace(xhci, trace_xhci_dbg_init,
  			"Finished xhci_run for USB3 roothub");
  	return 0;

target/linux/generic/patches-4.3/103-packet_allow_empty_payload.patch

@@ -6,7 +6,7 @@ Signed-off-by: Felix Fietkau <[email protected]>
 
 --- a/net/packet/af_packet.c
 +++ b/net/packet/af_packet.c
-@@ -2323,7 +2323,7 @@ static void tpacket_destruct_skb(struct
+@@ -2329,7 +2329,7 @@ static void tpacket_destruct_skb(struct
  static bool ll_header_truncated(const struct net_device *dev, int len)
  {
  	/* net device doesn't like empty head */

target/linux/generic/patches-4.3/143-mtd-bcm47xxpart-limit-scanned-flash-area-on-BCM47XX-.patch

@@ -20,7 +20,7 @@ Signed-off-by: Rafał Miłecki <[email protected]>
 
 --- a/drivers/mtd/bcm47xxpart.c
 +++ b/drivers/mtd/bcm47xxpart.c
-@@ -118,8 +118,8 @@ static int bcm47xxpart_parse(struct mtd_info *master,
+@@ -118,8 +118,8 @@ static int bcm47xxpart_parse(struct mtd_
  	/* Parse block by block looking for magics */
  	for (offset = 0; offset <= master->size - blocksize;
  	     offset += blocksize) {

target/linux/generic/patches-4.3/144-mtd-bcm47xxpart-don-t-fail-because-of-bit-flips.patch

@@ -14,11 +14,9 @@ Signed-off-by: Rafał Miłecki <[email protected]>
  drivers/mtd/bcm47xxpart.c | 38 ++++++++++++++++++++++----------------
  1 file changed, 22 insertions(+), 16 deletions(-)
 
-diff --git a/drivers/mtd/bcm47xxpart.c b/drivers/mtd/bcm47xxpart.c
-index 4450e74..1ab3451 100644
 --- a/drivers/mtd/bcm47xxpart.c
 +++ b/drivers/mtd/bcm47xxpart.c
-@@ -66,11 +66,13 @@ static const char *bcm47xxpart_trx_data_part_name(struct mtd_info *master,
+@@ -66,11 +66,13 @@ static const char *bcm47xxpart_trx_data_
  {
  	uint32_t buf;
  	size_t bytes_read;
@@ -36,7 +34,7 @@ index 4450e74..1ab3451 100644
  		goto out_default;
  	}
  
-@@ -95,6 +97,7 @@ static int bcm47xxpart_parse(struct mtd_info *master,
+@@ -95,6 +97,7 @@ static int bcm47xxpart_parse(struct mtd_
  	int trx_part = -1;
  	int last_trx_part = -1;
  	int possible_nvram_sizes[] = { 0x8000, 0xF000, 0x10000, };
@@ -44,7 +42,7 @@ index 4450e74..1ab3451 100644
  
  	/*
  	 * Some really old flashes (like AT45DB*) had smaller erasesize-s, but
-@@ -128,10 +131,11 @@ static int bcm47xxpart_parse(struct mtd_info *master,
+@@ -128,10 +131,11 @@ static int bcm47xxpart_parse(struct mtd_
  		}
  
  		/* Read beginning of the block */
@@ -60,7 +58,7 @@ index 4450e74..1ab3451 100644
  			continue;
  		}
  
-@@ -254,10 +258,11 @@ static int bcm47xxpart_parse(struct mtd_info *master,
+@@ -254,10 +258,11 @@ static int bcm47xxpart_parse(struct mtd_
  		}
  
  		/* Read middle of the block */
@@ -76,7 +74,7 @@ index 4450e74..1ab3451 100644
  			continue;
  		}
  
-@@ -277,10 +282,11 @@ static int bcm47xxpart_parse(struct mtd_info *master,
+@@ -277,10 +282,11 @@ static int bcm47xxpart_parse(struct mtd_
  		}
  
  		offset = master->size - possible_nvram_sizes[i];
@@ -92,6 +90,3 @@ index 4450e74..1ab3451 100644
  			continue;
  		}
  
--- 
-1.8.4.5
-

target/linux/generic/patches-4.3/192-USB-qcserial-Add-support-for-Quectel-EC20-Mini-PCIe-.patch

@@ -1,114 +0,0 @@
-From 128524b9db3e4f4245226852bee771bd03db75be Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Petr=20=C5=A0tetiar?= <[email protected]>
-Date: Tue, 3 Nov 2015 11:01:42 +0100
-Subject: [PATCH 1/2] USB: qcserial: Add support for Quectel EC20 Mini PCIe
- module
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-It seems like this device has same vendor and product IDs as G2K
-devices, but it has different number of interfaces(4 vs 5) and also
-different interface layout which makes it currently unusable:
-
-	usbcore: registered new interface driver qcserial
-	usbserial: USB Serial support registered for Qualcomm USB modem
-	usb 2-1.2: unknown number of interfaces: 5
-
-lsusb output:
-
-	Bus 002 Device 003: ID 05c6:9215 Qualcomm, Inc. Acer Gobi 2000 Wireless
-	Device Descriptor:
-	  bLength                18
-	  bDescriptorType         1
-	  bcdUSB               2.00
-	  bDeviceClass            0 (Defined at Interface level)
-	  bDeviceSubClass         0
-	  bDeviceProtocol         0
-	  bMaxPacketSize0        64
-	  idVendor           0x05c6 Qualcomm, Inc.
-	  idProduct          0x9215 Acer Gobi 2000 Wireless Modem
-	  bcdDevice            2.32
-	  iManufacturer           1 Quectel
-	  iProduct                2 Quectel LTE Module
-	  iSerial                 0
-	  bNumConfigurations      1
-	  Configuration Descriptor:
-	    bLength                 9
-	    bDescriptorType         2
-	    wTotalLength          209
-	    bNumInterfaces          5
-	    bConfigurationValue     1
-	    iConfiguration          0
-	    bmAttributes         0xa0
-	      (Bus Powered)
-	      Remote Wakeup
-	    MaxPower              500mA
-
-Signed-off-by: Petr Štetiar <[email protected]>
----
- drivers/usb/serial/qcserial.c |   39 +++++++++++++++++++++++++++++++++++++++
- 1 file changed, 39 insertions(+)
-
---- a/drivers/usb/serial/qcserial.c
-+++ b/drivers/usb/serial/qcserial.c
-@@ -22,6 +22,8 @@
- #define DRIVER_AUTHOR "Qualcomm Inc"
- #define DRIVER_DESC "Qualcomm USB Serial driver"
- 
-+#define QUECTEL_EC20_IDPRODUCT 0x9215
-+
- /* standard device layouts supported by this driver */
- enum qcserial_layouts {
- 	QCSERIAL_G2K = 0,	/* Gobi 2000 */
-@@ -167,6 +169,38 @@ static const struct usb_device_id id_tab
- };
- MODULE_DEVICE_TABLE(usb, id_table);
- 
-+static int handle_quectel_ec20(struct device *dev, int ifnum)
-+{
-+	int altsetting = 0;
-+
-+	/*
-+	 * Quectel EC20 Mini PCIe LTE module layout:
-+	 * 0: DM/DIAG (use libqcdm from ModemManager for communication)
-+	 * 1: NMEA
-+	 * 2: AT-capable modem port
-+	 * 3: Modem interface
-+	 * 4: NDIS
-+	 */
-+	switch (ifnum) {
-+	case 0:
-+		dev_dbg(dev, "Quectel EC20 DM/DIAG interface found\n");
-+		break;
-+	case 1:
-+		dev_dbg(dev, "Quectel EC20 NMEA GPS interface found\n");
-+		break;
-+	case 2:
-+	case 3:
-+		dev_dbg(dev, "Quectel EC20 Modem port found\n");
-+		break;
-+	case 4:
-+		/* Don't claim the QMI/net interface */
-+		altsetting = -1;
-+		break;
-+	}
-+
-+	return altsetting;
-+}
-+
- static int qcprobe(struct usb_serial *serial, const struct usb_device_id *id)
- {
- 	struct usb_host_interface *intf = serial->interface->cur_altsetting;
-@@ -235,6 +269,11 @@ static int qcprobe(struct usb_serial *se
- 			altsetting = -1;
- 		break;
- 	case QCSERIAL_G2K:
-+		if (nintf == 5 && id->idProduct == QUECTEL_EC20_IDPRODUCT) {
-+			altsetting = handle_quectel_ec20(dev, ifnum);
-+			goto done;
-+		}
-+
- 		/*
- 		 * Gobi 2K+ USB layout:
- 		 * 0: QMI/net

target/linux/generic/patches-4.3/192-net-Fix-presrc-lookups.patch

@@ -1,58 +0,0 @@
-From patchwork Tue Nov  3 23:59:28 2015
-Content-Type: text/plain; charset="utf-8"
-MIME-Version: 1.0
-Content-Transfer-Encoding: 7bit
-Subject: net: Fix prefsrc lookups
-From: David Ahern <[email protected]>
-X-Patchwork-Id: 539645
-Message-Id: <[email protected]>
-To: [email protected]
-Cc: [email protected], David Ahern <[email protected]>
-Date: Tue,  3 Nov 2015 15:59:28 -0800
-
-A bug report (https://bugzilla.kernel.org/show_bug.cgi?id=107071) noted
-that the follwoing ip command is failing with v4.3:
-
-    $ ip route add 10.248.5.0/24 dev bond0.250 table vlan_250 src 10.248.5.154
-    RTNETLINK answers: Invalid argument
-
-021dd3b8a142d changed the lookup of the given preferred source address to
-use the table id passed in, but this assumes the local entries are in the
-given table which is not necessarily true for non-VRF use cases. When
-validating the preferred source fallback to the local table on failure.
-
-Fixes: 021dd3b8a142d ("net: Add routes to the table associated with the device")
-Signed-off-by: David Ahern <[email protected]>
----
-This is needed in v4.3.
-
- net/ipv4/fib_semantics.c | 13 ++++++++++---
- 1 file changed, 10 insertions(+), 3 deletions(-)
-
---- a/net/ipv4/fib_semantics.c
-+++ b/net/ipv4/fib_semantics.c
-@@ -864,14 +864,21 @@ static bool fib_valid_prefsrc(struct fib
- 	if (cfg->fc_type != RTN_LOCAL || !cfg->fc_dst ||
- 	    fib_prefsrc != cfg->fc_dst) {
- 		u32 tb_id = cfg->fc_table;
-+		int rc;
- 
- 		if (tb_id == RT_TABLE_MAIN)
- 			tb_id = RT_TABLE_LOCAL;
- 
--		if (inet_addr_type_table(cfg->fc_nlinfo.nl_net,
--					 fib_prefsrc, tb_id) != RTN_LOCAL) {
--			return false;
-+		rc = inet_addr_type_table(cfg->fc_nlinfo.nl_net,
-+					  fib_prefsrc, tb_id);
-+
-+		if (rc != RTN_LOCAL && tb_id != RT_TABLE_LOCAL) {
-+			rc = inet_addr_type_table(cfg->fc_nlinfo.nl_net,
-+						  fib_prefsrc, RT_TABLE_LOCAL);
- 		}
-+
-+		if (rc != RTN_LOCAL)
-+			return false;
- 	}
- 	return true;
- }

target/linux/generic/patches-4.3/193-USB-qmi_wwan-Add-quirk-for-Quectel-EC20-Mini-PCIe-mo.patch

@@ -48,7 +48,7 @@ Signed-off-by: Petr Štetiar <[email protected]>
 
 --- a/drivers/net/usb/qmi_wwan.c
 +++ b/drivers/net/usb/qmi_wwan.c
-@@ -822,6 +822,7 @@ static const struct usb_device_id produc
+@@ -823,6 +823,7 @@ static const struct usb_device_id produc
  	{QMI_GOBI_DEVICE(0x05c6, 0x9245)},	/* Samsung Gobi 2000 Modem device (VL176) */
  	{QMI_GOBI_DEVICE(0x03f0, 0x251d)},	/* HP Gobi 2000 Modem device (VP412) */
  	{QMI_GOBI_DEVICE(0x05c6, 0x9215)},	/* Acer Gobi 2000 Modem device (VP413) */
@@ -56,7 +56,7 @@ Signed-off-by: Petr Štetiar <[email protected]>
  	{QMI_GOBI_DEVICE(0x05c6, 0x9265)},	/* Asus Gobi 2000 Modem device (VR305) */
  	{QMI_GOBI_DEVICE(0x05c6, 0x9235)},	/* Top Global Gobi 2000 Modem device (VR306) */
  	{QMI_GOBI_DEVICE(0x05c6, 0x9275)},	/* iRex Technologies Gobi 2000 Modem device (VR307) */
-@@ -853,10 +854,24 @@ static const struct usb_device_id produc
+@@ -854,10 +855,24 @@ static const struct usb_device_id produc
  };
  MODULE_DEVICE_TABLE(usb, products);
  
@@ -81,7 +81,7 @@ Signed-off-by: Petr Štetiar <[email protected]>
  
  	/* Workaround to enable dynamic IDs.  This disables usbnet
  	 * blacklisting functionality.  Which, if required, can be
-@@ -868,6 +883,12 @@ static int qmi_wwan_probe(struct usb_int
+@@ -869,6 +884,12 @@ static int qmi_wwan_probe(struct usb_int
  		id->driver_info = (unsigned long)&qmi_wwan_info;
  	}
  

target/linux/generic/patches-4.3/630-packet_socket_type.patch

@@ -26,7 +26,7 @@ Signed-off-by: Felix Fietkau <[email protected]>
  #define PACKET_FANOUT_LB		1
 --- a/net/packet/af_packet.c
 +++ b/net/packet/af_packet.c
-@@ -1750,6 +1750,7 @@ static int packet_rcv_spkt(struct sk_buf
+@@ -1764,6 +1764,7 @@ static int packet_rcv_spkt(struct sk_buf
  {
  	struct sock *sk;
  	struct sockaddr_pkt *spkt;
@@ -34,7 +34,7 @@ Signed-off-by: Felix Fietkau <[email protected]>
  
  	/*
  	 *	When we registered the protocol we saved the socket in the data
-@@ -1757,6 +1758,7 @@ static int packet_rcv_spkt(struct sk_buf
+@@ -1771,6 +1772,7 @@ static int packet_rcv_spkt(struct sk_buf
  	 */
  
  	sk = pt->af_packet_priv;
@@ -42,7 +42,7 @@ Signed-off-by: Felix Fietkau <[email protected]>
  
  	/*
  	 *	Yank back the headers [hope the device set this
-@@ -1769,7 +1771,7 @@ static int packet_rcv_spkt(struct sk_buf
+@@ -1783,7 +1785,7 @@ static int packet_rcv_spkt(struct sk_buf
  	 *	so that this procedure is noop.
  	 */
  
@@ -51,7 +51,7 @@ Signed-off-by: Felix Fietkau <[email protected]>
  		goto out;
  
  	if (!net_eq(dev_net(dev), sock_net(sk)))
-@@ -1976,12 +1978,12 @@ static int packet_rcv(struct sk_buff *sk
+@@ -1982,12 +1984,12 @@ static int packet_rcv(struct sk_buff *sk
  	int skb_len = skb->len;
  	unsigned int snaplen, res;
  
@@ -67,7 +67,7 @@ Signed-off-by: Felix Fietkau <[email protected]>
  	if (!net_eq(dev_net(dev), sock_net(sk)))
  		goto drop;
  
-@@ -2101,12 +2103,12 @@ static int tpacket_rcv(struct sk_buff *s
+@@ -2107,12 +2109,12 @@ static int tpacket_rcv(struct sk_buff *s
  	BUILD_BUG_ON(TPACKET_ALIGN(sizeof(*h.h2)) != 32);
  	BUILD_BUG_ON(TPACKET_ALIGN(sizeof(*h.h3)) != 48);
  
@@ -83,7 +83,7 @@ Signed-off-by: Felix Fietkau <[email protected]>
  	if (!net_eq(dev_net(dev), sock_net(sk)))
  		goto drop;
  
-@@ -3069,6 +3071,7 @@ static int packet_create(struct net *net
+@@ -3089,6 +3091,7 @@ static int packet_create(struct net *net
  	mutex_init(&po->pg_vec_lock);
  	po->rollover = NULL;
  	po->prot_hook.func = packet_rcv;
@@ -91,7 +91,7 @@ Signed-off-by: Felix Fietkau <[email protected]>
  
  	if (sock->type == SOCK_PACKET)
  		po->prot_hook.func = packet_rcv_spkt;
-@@ -3684,6 +3687,16 @@ packet_setsockopt(struct socket *sock, i
+@@ -3704,6 +3707,16 @@ packet_setsockopt(struct socket *sock, i
  		po->xmit = val ? packet_direct_xmit : dev_queue_xmit;
  		return 0;
  	}
@@ -108,7 +108,7 @@ Signed-off-by: Felix Fietkau <[email protected]>
  	default:
  		return -ENOPROTOOPT;
  	}
-@@ -3736,6 +3749,13 @@ static int packet_getsockopt(struct sock
+@@ -3756,6 +3769,13 @@ static int packet_getsockopt(struct sock
  	case PACKET_VNET_HDR:
  		val = po->has_vnet_hdr;
  		break;

target/linux/generic/patches-4.3/662-use_fq_codel_by_default.patch

@@ -32,7 +32,7 @@
  {
 --- a/include/net/sch_generic.h
 +++ b/include/net/sch_generic.h
-@@ -341,6 +341,7 @@ extern struct Qdisc_ops noop_qdisc_ops;
+@@ -344,6 +344,7 @@ extern struct Qdisc_ops noop_qdisc_ops;
  extern struct Qdisc_ops pfifo_fast_ops;
  extern struct Qdisc_ops mq_qdisc_ops;
  extern struct Qdisc_ops noqueue_qdisc_ops;

target/linux/generic/patches-4.3/664-codel_fix_3_12.patch

@@ -1,6 +1,6 @@
 --- a/net/sched/sch_api.c
 +++ b/net/sched/sch_api.c
-@@ -1936,7 +1936,7 @@ static int __init pktsched_init(void)
+@@ -1945,7 +1945,7 @@ static int __init pktsched_init(void)
  		return err;
  	}
  

target/linux/generic/patches-4.3/670-ipv6-allow-rejecting-with-source-address-failed-policy.patch

@@ -143,7 +143,7 @@ Signed-off-by: Jonas Gorski <[email protected]>
  static const struct rt6_info ip6_blk_hole_entry_template = {
  	.dst = {
  		.__refcnt	= ATOMIC_INIT(1),
-@@ -1886,6 +1903,11 @@ int ip6_route_info_create(struct fib6_co
+@@ -1902,6 +1919,11 @@ int ip6_route_info_create(struct fib6_co
  			rt->dst.output = ip6_pkt_prohibit_out;
  			rt->dst.input = ip6_pkt_prohibit;
  			break;
@@ -155,7 +155,7 @@ Signed-off-by: Jonas Gorski <[email protected]>
  		case RTN_THROW:
  		case RTN_UNREACHABLE:
  		default:
-@@ -2488,6 +2510,17 @@ static int ip6_pkt_prohibit_out(struct s
+@@ -2504,6 +2526,17 @@ static int ip6_pkt_prohibit_out(struct s
  	return ip6_pkt_drop(skb, ICMPV6_ADM_PROHIBITED, IPSTATS_MIB_OUTNOROUTES);
  }
  
@@ -173,7 +173,7 @@ Signed-off-by: Jonas Gorski <[email protected]>
  /*
   *	Allocate a dst for local (unicast / anycast) address.
   */
-@@ -2728,7 +2761,8 @@ static int rtm_to_fib6_config(struct sk_
+@@ -2744,7 +2777,8 @@ static int rtm_to_fib6_config(struct sk_
  	if (rtm->rtm_type == RTN_UNREACHABLE ||
  	    rtm->rtm_type == RTN_BLACKHOLE ||
  	    rtm->rtm_type == RTN_PROHIBIT ||
@@ -183,7 +183,7 @@ Signed-off-by: Jonas Gorski <[email protected]>
  		cfg->fc_flags |= RTF_REJECT;
  
  	if (rtm->rtm_type == RTN_LOCAL)
-@@ -3084,6 +3118,9 @@ static int rt6_fill_node(struct net *net
+@@ -3100,6 +3134,9 @@ static int rt6_fill_node(struct net *net
  		case -EACCES:
  			rtm->rtm_type = RTN_PROHIBIT;
  			break;
@@ -193,7 +193,7 @@ Signed-off-by: Jonas Gorski <[email protected]>
  		case -EAGAIN:
  			rtm->rtm_type = RTN_THROW;
  			break;
-@@ -3352,6 +3389,8 @@ static int ip6_route_dev_notify(struct n
+@@ -3368,6 +3405,8 @@ static int ip6_route_dev_notify(struct n
  #ifdef CONFIG_IPV6_MULTIPLE_TABLES
  		net->ipv6.ip6_prohibit_entry->dst.dev = dev;
  		net->ipv6.ip6_prohibit_entry->rt6i_idev = in6_dev_get(dev);
@@ -202,7 +202,7 @@ Signed-off-by: Jonas Gorski <[email protected]>
  		net->ipv6.ip6_blk_hole_entry->dst.dev = dev;
  		net->ipv6.ip6_blk_hole_entry->rt6i_idev = in6_dev_get(dev);
  #endif
-@@ -3568,6 +3607,17 @@ static int __net_init ip6_route_net_init
+@@ -3584,6 +3623,17 @@ static int __net_init ip6_route_net_init
  	net->ipv6.ip6_blk_hole_entry->dst.ops = &net->ipv6.ip6_dst_ops;
  	dst_init_metrics(&net->ipv6.ip6_blk_hole_entry->dst,
  			 ip6_template_metrics, true);
@@ -220,7 +220,7 @@ Signed-off-by: Jonas Gorski <[email protected]>
  #endif
  
  	net->ipv6.sysctl.flush_delay = 0;
-@@ -3586,6 +3636,8 @@ out:
+@@ -3602,6 +3652,8 @@ out:
  	return ret;
  
  #ifdef CONFIG_IPV6_MULTIPLE_TABLES
@@ -229,7 +229,7 @@ Signed-off-by: Jonas Gorski <[email protected]>
  out_ip6_prohibit_entry:
  	kfree(net->ipv6.ip6_prohibit_entry);
  out_ip6_null_entry:
-@@ -3603,6 +3655,7 @@ static void __net_exit ip6_route_net_exi
+@@ -3619,6 +3671,7 @@ static void __net_exit ip6_route_net_exi
  #ifdef CONFIG_IPV6_MULTIPLE_TABLES
  	kfree(net->ipv6.ip6_prohibit_entry);
  	kfree(net->ipv6.ip6_blk_hole_entry);
@@ -237,7 +237,7 @@ Signed-off-by: Jonas Gorski <[email protected]>
  #endif
  	dst_entries_destroy(&net->ipv6.ip6_dst_ops);
  }
-@@ -3700,6 +3753,9 @@ int __init ip6_route_init(void)
+@@ -3716,6 +3769,9 @@ int __init ip6_route_init(void)
  	init_net.ipv6.ip6_prohibit_entry->rt6i_idev = in6_dev_get(init_net.loopback_dev);
  	init_net.ipv6.ip6_blk_hole_entry->dst.dev = init_net.loopback_dev;
  	init_net.ipv6.ip6_blk_hole_entry->rt6i_idev = in6_dev_get(init_net.loopback_dev);

target/linux/imx6/patches-4.3/035-ARM-dts-imx-ventana-set-GW54xx-PMIC-swbst-regulator-.patch

@@ -13,10 +13,8 @@ Signed-off-by: Tim Harvey <[email protected]>
  arch/arm/boot/dts/imx6qdl-gw54xx.dtsi | 2 ++
  1 file changed, 2 insertions(+)
 
-Index: linux-4.3/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
-===================================================================
---- linux-4.3.orig/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi	2015-11-01 16:05:25.000000000 -0800
-+++ linux-4.3/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi	2015-12-18 10:43:37.000000000 -0800
+--- a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
++++ b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
 @@ -260,6 +260,8 @@
  			swbst_reg: swbst {
  				regulator-min-microvolt = <5000000>;

target/linux/imx6/patches-4.3/036-ARM-dts-imx-ventana-fix-GW53xx-GW54xx-lvds-channel.patch

@@ -9,10 +9,8 @@ Signed-off-by: Tim Harvey <[email protected]>
  arch/arm/boot/dts/imx6qdl-gw54xx.dtsi | 2 +-
  2 files changed, 2 insertions(+), 2 deletions(-)
 
-Index: linux-4.3/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
-===================================================================
---- linux-4.3.orig/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi	2015-11-01 16:05:25.000000000 -0800
-+++ linux-4.3/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi	2015-12-18 10:43:32.000000000 -0800
+--- a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
++++ b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
 @@ -247,7 +247,7 @@
  &ldb {
  	status = "okay";
@@ -22,10 +20,8 @@ Index: linux-4.3/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
  		fsl,data-mapping = "spwg";
  		fsl,data-width = <18>;
  		status = "okay";
-Index: linux-4.3/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
-===================================================================
---- linux-4.3.orig/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi	2015-12-18 10:39:44.855158318 -0800
-+++ linux-4.3/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi	2015-12-18 10:43:32.000000000 -0800
+--- a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
++++ b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
 @@ -338,7 +338,7 @@
  &ldb {
  	status = "okay";

target/linux/imx6/patches-4.3/037-ARM-dts-imx-ventana-fix-GW53xx-GW54xx-lvds-channel.patch

@@ -20,10 +20,8 @@ Signed-off-by: Tim Harvey <[email protected]>
  arch/arm/boot/dts/imx6qdl-gw54xx.dtsi | 7 +++++++
  3 files changed, 21 insertions(+)
 
-Index: linux-4.3/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
-===================================================================
---- linux-4.3.orig/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi	2015-11-01 16:05:25.000000000 -0800
-+++ linux-4.3/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi	2015-12-18 10:43:32.000000000 -0800
+--- a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
++++ b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
 @@ -151,6 +151,13 @@
  	status = "okay";
  };
@@ -38,10 +36,8 @@ Index: linux-4.3/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
  &fec {
  	pinctrl-names = "default";
  	pinctrl-0 = <&pinctrl_enet>;
-Index: linux-4.3/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
-===================================================================
---- linux-4.3.orig/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi	2015-12-18 10:39:44.867158318 -0800
-+++ linux-4.3/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi	2015-12-18 10:43:32.000000000 -0800
+--- a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
++++ b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
 @@ -152,6 +152,13 @@
  	status = "okay";
  };
@@ -56,10 +52,8 @@ Index: linux-4.3/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
  &fec {
  	pinctrl-names = "default";
  	pinctrl-0 = <&pinctrl_enet>;
-Index: linux-4.3/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
-===================================================================
---- linux-4.3.orig/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi	2015-12-18 10:39:44.871158318 -0800
-+++ linux-4.3/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi	2015-12-18 10:43:32.000000000 -0800
+--- a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
++++ b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
 @@ -142,6 +142,13 @@
  	status = "okay";
  };

target/linux/imx6/patches-4.3/040-ARM-dts-imx-ventana-add-pwm-nodes.patch

@@ -1,7 +1,5 @@
-Index: linux-4.3/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
-===================================================================
---- linux-4.3.orig/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi	2015-11-01 16:05:25.000000000 -0800
-+++ linux-4.3/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi	2015-12-18 10:43:27.000000000 -0800
+--- a/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
++++ b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
 @@ -174,6 +174,24 @@
  	status = "okay";
  };
@@ -52,10 +50,8 @@ Index: linux-4.3/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
  		pinctrl_uart1: uart1grp {
  			fsl,pins = <
  				MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
-Index: linux-4.3/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
-===================================================================
---- linux-4.3.orig/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi	2015-12-18 10:39:44.883158318 -0800
-+++ linux-4.3/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi	2015-12-18 10:43:31.000000000 -0800
+--- a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
++++ b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
 @@ -282,6 +282,18 @@
  	status = "okay";
  };
@@ -94,10 +90,8 @@ Index: linux-4.3/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
  		pinctrl_pwm4: pwm4grp {
  			fsl,pins = <
  				MX6QDL_PAD_SD1_CMD__PWM4_OUT		0x1b0b1
-Index: linux-4.3/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
-===================================================================
---- linux-4.3.orig/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi	2015-12-18 10:39:44.883158318 -0800
-+++ linux-4.3/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi	2015-12-18 10:43:27.000000000 -0800
+--- a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
++++ b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
 @@ -287,6 +287,18 @@
  	};
  };
@@ -136,10 +130,8 @@ Index: linux-4.3/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
  		pinctrl_pwm4: pwm4grp {
  			fsl,pins = <
  				MX6QDL_PAD_SD1_CMD__PWM4_OUT		0x1b0b1
-Index: linux-4.3/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
-===================================================================
---- linux-4.3.orig/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi	2015-12-18 10:39:44.883158318 -0800
-+++ linux-4.3/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi	2015-12-18 10:43:27.000000000 -0800
+--- a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
++++ b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
 @@ -378,6 +378,24 @@
  	};
  };
@@ -190,10 +182,8 @@ Index: linux-4.3/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
  		pinctrl_pwm4: pwm4grp {
  			fsl,pins = <
  				MX6QDL_PAD_SD1_CMD__PWM4_OUT		0x1b0b1
-Index: linux-4.3/arch/arm/boot/dts/imx6qdl-gw551x.dtsi
-===================================================================
---- linux-4.3.orig/arch/arm/boot/dts/imx6qdl-gw551x.dtsi	2015-11-01 16:05:25.000000000 -0800
-+++ linux-4.3/arch/arm/boot/dts/imx6qdl-gw551x.dtsi	2015-12-18 10:43:21.000000000 -0800
+--- a/arch/arm/boot/dts/imx6qdl-gw551x.dtsi
++++ b/arch/arm/boot/dts/imx6qdl-gw551x.dtsi
 @@ -198,6 +198,18 @@
  	status = "okay";
  };
@@ -232,10 +222,8 @@ Index: linux-4.3/arch/arm/boot/dts/imx6qdl-gw551x.dtsi
  		pinctrl_uart2: uart2grp {
  			fsl,pins = <
  				MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
-Index: linux-4.3/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
-===================================================================
---- linux-4.3.orig/arch/arm/boot/dts/imx6qdl-gw552x.dtsi	2015-11-01 16:05:25.000000000 -0800
-+++ linux-4.3/arch/arm/boot/dts/imx6qdl-gw552x.dtsi	2015-12-18 10:43:21.000000000 -0800
+--- a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
++++ b/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
 @@ -164,6 +164,18 @@
  	status = "okay";
  };

target/linux/imx6/patches-4.3/041-ARM-dts-imx-ventana-add-spi-support-for-gw52xx.patch

@@ -1,7 +1,5 @@
-Index: linux-4.3/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
-===================================================================
---- linux-4.3.orig/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi	2015-12-18 10:39:44.899158318 -0800
-+++ linux-4.3/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi	2015-12-18 10:43:27.000000000 -0800
+--- a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
++++ b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
 @@ -158,6 +158,14 @@
  	                  <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
  };

target/linux/imx6/patches-4.3/045-imx-thermal-use-cpu-temperature-grade-info-for-thresholds

@@ -1,7 +1,5 @@
-Index: linux-4.3/drivers/thermal/imx_thermal.c
-===================================================================
---- linux-4.3.orig/drivers/thermal/imx_thermal.c	2015-11-01 16:05:25.000000000 -0800
-+++ linux-4.3/drivers/thermal/imx_thermal.c	2015-12-18 10:39:44.915158318 -0800
+--- a/drivers/thermal/imx_thermal.c
++++ b/drivers/thermal/imx_thermal.c
 @@ -55,6 +55,7 @@
  #define TEMPSENSE2_PANIC_VALUE_SHIFT	16
  #define TEMPSENSE2_PANIC_VALUE_MASK	0xfff0000
@@ -10,7 +8,7 @@ Index: linux-4.3/drivers/thermal/imx_thermal.c
  #define OCOTP_ANA1			0x04e0
  
  /* The driver supports 1 passive trip point and 1 critical trip point */
-@@ -64,12 +65,6 @@
+@@ -64,12 +65,6 @@ enum imx_thermal_trip {
  	IMX_TRIP_NUM,
  };
  
@@ -23,7 +21,7 @@ Index: linux-4.3/drivers/thermal/imx_thermal.c
  #define IMX_POLLING_DELAY		2000 /* millisecond */
  #define IMX_PASSIVE_DELAY		1000
  
-@@ -100,12 +95,14 @@
+@@ -100,12 +95,14 @@ struct imx_thermal_data {
  	u32 c1, c2; /* See formula in imx_get_sensor_data() */
  	int temp_passive;
  	int temp_critical;
@@ -38,7 +36,7 @@ Index: linux-4.3/drivers/thermal/imx_thermal.c
  };
  
  static void imx_set_panic_temp(struct imx_thermal_data *data,
-@@ -285,10 +282,12 @@
+@@ -285,10 +282,12 @@ static int imx_set_trip_temp(struct ther
  {
  	struct imx_thermal_data *data = tz->devdata;
  
@@ -52,7 +50,7 @@ Index: linux-4.3/drivers/thermal/imx_thermal.c
  		return -EINVAL;
  
  	data->temp_passive = temp;
-@@ -404,17 +403,39 @@
+@@ -404,17 +403,39 @@ static int imx_get_sensor_data(struct pl
  	data->c1 = temp64;
  	data->c2 = n1 * data->c1 + 1000 * t1;
  
@@ -100,7 +98,7 @@ Index: linux-4.3/drivers/thermal/imx_thermal.c
  
  	return 0;
  }
-@@ -559,6 +580,11 @@
+@@ -559,6 +580,11 @@ static int imx_thermal_probe(struct plat
  		return ret;
  	}
  

target/linux/imx6/patches-4.3/100-bootargs.patch

@@ -1,7 +1,5 @@
-Index: linux-4.3/arch/arm/boot/dts/imx6dl-wandboard.dts
-===================================================================
---- linux-4.3.orig/arch/arm/boot/dts/imx6dl-wandboard.dts	2015-11-01 16:05:25.000000000 -0800
-+++ linux-4.3/arch/arm/boot/dts/imx6dl-wandboard.dts	2015-12-18 10:39:44.923158318 -0800
+--- a/arch/arm/boot/dts/imx6dl-wandboard.dts
++++ b/arch/arm/boot/dts/imx6dl-wandboard.dts
 @@ -19,4 +19,8 @@
  	memory {
  		reg = <0x10000000 0x40000000>;

target/linux/imx6/patches-4.3/202-net-igb-add-i210-i211-support-for-phy-read-write.patch

@@ -8,11 +8,9 @@ Date:   Thu May 15 00:12:26 2014 -0700
     
     Signed-off-by: Tim Harvey <[email protected]>
 
-Index: linux-4.3/drivers/net/ethernet/intel/igb/e1000_phy.c
-===================================================================
---- linux-4.3.orig/drivers/net/ethernet/intel/igb/e1000_phy.c	2015-11-01 16:05:25.000000000 -0800
-+++ linux-4.3/drivers/net/ethernet/intel/igb/e1000_phy.c	2015-12-18 10:43:28.000000000 -0800
-@@ -129,7 +129,7 @@
+--- a/drivers/net/ethernet/intel/igb/e1000_phy.c
++++ b/drivers/net/ethernet/intel/igb/e1000_phy.c
+@@ -129,7 +129,7 @@ out:
  s32 igb_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data)
  {
  	struct e1000_phy_info *phy = &hw->phy;
@@ -21,7 +19,7 @@ Index: linux-4.3/drivers/net/ethernet/intel/igb/e1000_phy.c
  	s32 ret_val = 0;
  
  	if (offset > MAX_PHY_REG_ADDRESS) {
-@@ -142,11 +142,25 @@
+@@ -142,11 +142,25 @@ s32 igb_read_phy_reg_mdic(struct e1000_h
  	 * Control register.  The MAC will take care of interfacing with the
  	 * PHY to retrieve the desired data.
  	 */
@@ -50,7 +48,7 @@ Index: linux-4.3/drivers/net/ethernet/intel/igb/e1000_phy.c
  
  	/* Poll the ready bit to see if the MDI read completed
  	 * Increasing the time out as testing showed failures with
-@@ -171,6 +185,18 @@
+@@ -171,6 +185,18 @@ s32 igb_read_phy_reg_mdic(struct e1000_h
  	*data = (u16) mdic;
  
  out:
@@ -69,7 +67,7 @@ Index: linux-4.3/drivers/net/ethernet/intel/igb/e1000_phy.c
  	return ret_val;
  }
  
-@@ -185,7 +211,7 @@
+@@ -185,7 +211,7 @@ out:
  s32 igb_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data)
  {
  	struct e1000_phy_info *phy = &hw->phy;
@@ -78,7 +76,7 @@ Index: linux-4.3/drivers/net/ethernet/intel/igb/e1000_phy.c
  	s32 ret_val = 0;
  
  	if (offset > MAX_PHY_REG_ADDRESS) {
-@@ -198,12 +224,27 @@
+@@ -198,12 +224,27 @@ s32 igb_write_phy_reg_mdic(struct e1000_
  	 * Control register.  The MAC will take care of interfacing with the
  	 * PHY to retrieve the desired data.
  	 */
@@ -110,7 +108,7 @@ Index: linux-4.3/drivers/net/ethernet/intel/igb/e1000_phy.c
  
  	/* Poll the ready bit to see if the MDI read completed
  	 * Increasing the time out as testing showed failures with
-@@ -227,6 +268,18 @@
+@@ -227,6 +268,18 @@ s32 igb_write_phy_reg_mdic(struct e1000_
  	}
  
  out:

target/linux/imx6/patches-4.3/203-net-igb-add-phy-read-write-functions-that-accept-phy.patch

@@ -14,11 +14,9 @@ Signed-off-by: Tim Harvey <[email protected]>
  drivers/net/ethernet/intel/igb/e1000_phy.h   |  6 ++-
  3 files changed, 58 insertions(+), 26 deletions(-)
 
-Index: linux-4.3/drivers/net/ethernet/intel/igb/e1000_82575.c
-===================================================================
---- linux-4.3.orig/drivers/net/ethernet/intel/igb/e1000_82575.c	2015-11-01 16:05:25.000000000 -0800
-+++ linux-4.3/drivers/net/ethernet/intel/igb/e1000_82575.c	2015-12-18 10:43:28.000000000 -0800
-@@ -2153,7 +2153,7 @@
+--- a/drivers/net/ethernet/intel/igb/e1000_82575.c
++++ b/drivers/net/ethernet/intel/igb/e1000_82575.c
+@@ -2153,7 +2153,7 @@ static s32 igb_read_phy_reg_82580(struct
  	if (ret_val)
  		goto out;
  
@@ -27,7 +25,7 @@ Index: linux-4.3/drivers/net/ethernet/intel/igb/e1000_82575.c
  
  	hw->phy.ops.release(hw);
  
-@@ -2178,7 +2178,7 @@
+@@ -2178,7 +2178,7 @@ static s32 igb_write_phy_reg_82580(struc
  	if (ret_val)
  		goto out;
  
@@ -36,11 +34,9 @@ Index: linux-4.3/drivers/net/ethernet/intel/igb/e1000_82575.c
  
  	hw->phy.ops.release(hw);
  
-Index: linux-4.3/drivers/net/ethernet/intel/igb/e1000_phy.c
-===================================================================
---- linux-4.3.orig/drivers/net/ethernet/intel/igb/e1000_phy.c	2015-12-18 10:39:44.931158318 -0800
-+++ linux-4.3/drivers/net/ethernet/intel/igb/e1000_phy.c	2015-12-18 10:39:44.939158318 -0800
-@@ -126,9 +126,8 @@
+--- a/drivers/net/ethernet/intel/igb/e1000_phy.c
++++ b/drivers/net/ethernet/intel/igb/e1000_phy.c
+@@ -126,9 +126,8 @@ out:
   *  Reads the MDI control regsiter in the PHY at offset and stores the
   *  information read to data.
   **/
@@ -51,7 +47,7 @@ Index: linux-4.3/drivers/net/ethernet/intel/igb/e1000_phy.c
  	u32 i, mdicnfg, mdic = 0;
  	s32 ret_val = 0;
  
-@@ -147,14 +146,14 @@
+@@ -147,14 +146,14 @@ s32 igb_read_phy_reg_mdic(struct e1000_h
  	case e1000_i211:
  		mdicnfg = rd32(E1000_MDICNFG);
  		mdicnfg &= ~(E1000_MDICNFG_PHY_MASK);
@@ -68,7 +64,7 @@ Index: linux-4.3/drivers/net/ethernet/intel/igb/e1000_phy.c
  			(E1000_MDIC_OP_READ));
  		break;
  	}
-@@ -208,9 +207,8 @@
+@@ -208,9 +207,8 @@ out:
   *
   *  Writes data to MDI control register in the PHY at offset.
   **/
@@ -79,7 +75,7 @@ Index: linux-4.3/drivers/net/ethernet/intel/igb/e1000_phy.c
  	u32 i, mdicnfg, mdic = 0;
  	s32 ret_val = 0;
  
-@@ -229,7 +227,7 @@
+@@ -229,7 +227,7 @@ s32 igb_write_phy_reg_mdic(struct e1000_
  		case e1000_i211:
  			mdicnfg = rd32(E1000_MDICNFG);
  			mdicnfg &= ~(E1000_MDICNFG_PHY_MASK);
@@ -88,7 +84,7 @@ Index: linux-4.3/drivers/net/ethernet/intel/igb/e1000_phy.c
  			wr32(E1000_MDICNFG, mdicnfg);
  			mdic = (((u32)data) |
  				(offset << E1000_MDIC_REG_SHIFT) |
-@@ -238,7 +236,7 @@
+@@ -238,7 +236,7 @@ s32 igb_write_phy_reg_mdic(struct e1000_
  		default:
  			mdic = (((u32)data) |
  				(offset << E1000_MDIC_REG_SHIFT) |
@@ -97,7 +93,7 @@ Index: linux-4.3/drivers/net/ethernet/intel/igb/e1000_phy.c
  				(E1000_MDIC_OP_WRITE));
  			break;
  	}
-@@ -458,7 +456,7 @@
+@@ -458,7 +456,7 @@ s32 igb_read_phy_reg_igp(struct e1000_hw
  		goto out;
  
  	if (offset > MAX_PHY_MULTI_PAGE_REG) {
@@ -106,7 +102,7 @@ Index: linux-4.3/drivers/net/ethernet/intel/igb/e1000_phy.c
  						 IGP01E1000_PHY_PAGE_SELECT,
  						 (u16)offset);
  		if (ret_val) {
-@@ -467,8 +465,8 @@
+@@ -467,8 +465,8 @@ s32 igb_read_phy_reg_igp(struct e1000_hw
  		}
  	}
  
@@ -117,7 +113,7 @@ Index: linux-4.3/drivers/net/ethernet/intel/igb/e1000_phy.c
  
  	hw->phy.ops.release(hw);
  
-@@ -497,7 +495,7 @@
+@@ -497,7 +495,7 @@ s32 igb_write_phy_reg_igp(struct e1000_h
  		goto out;
  
  	if (offset > MAX_PHY_MULTI_PAGE_REG) {
@@ -126,7 +122,7 @@ Index: linux-4.3/drivers/net/ethernet/intel/igb/e1000_phy.c
  						 IGP01E1000_PHY_PAGE_SELECT,
  						 (u16)offset);
  		if (ret_val) {
-@@ -506,8 +504,8 @@
+@@ -506,8 +504,8 @@ s32 igb_write_phy_reg_igp(struct e1000_h
  		}
  	}
  
@@ -137,7 +133,7 @@ Index: linux-4.3/drivers/net/ethernet/intel/igb/e1000_phy.c
  
  	hw->phy.ops.release(hw);
  
-@@ -2547,8 +2545,9 @@
+@@ -2547,8 +2545,9 @@ out:
  }
  
  /**
@@ -148,7 +144,7 @@ Index: linux-4.3/drivers/net/ethernet/intel/igb/e1000_phy.c
   *  @offset: lower half is register offset to write to
   *     upper half is page to use.
   *  @data: data to write at register offset
-@@ -2556,7 +2555,7 @@
+@@ -2556,7 +2555,7 @@ out:
   *  Acquires semaphore, if necessary, then writes the data to PHY register
   *  at the offset.  Release any acquired semaphores before exiting.
   **/
@@ -157,7 +153,7 @@ Index: linux-4.3/drivers/net/ethernet/intel/igb/e1000_phy.c
  {
  	s32 ret_val;
  	u16 page = offset >> GS40G_PAGE_SHIFT;
-@@ -2566,10 +2565,10 @@
+@@ -2566,10 +2565,10 @@ s32 igb_write_phy_reg_gs40g(struct e1000
  	if (ret_val)
  		return ret_val;
  
@@ -170,7 +166,7 @@ Index: linux-4.3/drivers/net/ethernet/intel/igb/e1000_phy.c
  
  release:
  	hw->phy.ops.release(hw);
-@@ -2577,8 +2576,24 @@
+@@ -2577,8 +2576,24 @@ release:
  }
  
  /**
@@ -196,7 +192,7 @@ Index: linux-4.3/drivers/net/ethernet/intel/igb/e1000_phy.c
   *  @offset: lower half is register offset to read to
   *     upper half is page to use.
   *  @data: data to read at register offset
-@@ -2586,7 +2601,7 @@
+@@ -2586,7 +2601,7 @@ release:
   *  Acquires semaphore, if necessary, then reads the data in the PHY register
   *  at the offset.  Release any acquired semaphores before exiting.
   **/
@@ -205,7 +201,7 @@ Index: linux-4.3/drivers/net/ethernet/intel/igb/e1000_phy.c
  {
  	s32 ret_val;
  	u16 page = offset >> GS40G_PAGE_SHIFT;
-@@ -2596,10 +2611,10 @@
+@@ -2596,10 +2611,10 @@ s32 igb_read_phy_reg_gs40g(struct e1000_
  	if (ret_val)
  		return ret_val;
  
@@ -218,7 +214,7 @@ Index: linux-4.3/drivers/net/ethernet/intel/igb/e1000_phy.c
  
  release:
  	hw->phy.ops.release(hw);
-@@ -2607,6 +2622,21 @@
+@@ -2607,6 +2622,21 @@ release:
  }
  
  /**
@@ -240,11 +236,9 @@ Index: linux-4.3/drivers/net/ethernet/intel/igb/e1000_phy.c
   *  igb_set_master_slave_mode - Setup PHY for Master/slave mode
   *  @hw: pointer to the HW structure
   *
-Index: linux-4.3/drivers/net/ethernet/intel/igb/e1000_phy.h
-===================================================================
---- linux-4.3.orig/drivers/net/ethernet/intel/igb/e1000_phy.h	2015-11-01 16:05:25.000000000 -0800
-+++ linux-4.3/drivers/net/ethernet/intel/igb/e1000_phy.h	2015-12-18 10:39:44.939158318 -0800
-@@ -62,8 +62,8 @@
+--- a/drivers/net/ethernet/intel/igb/e1000_phy.h
++++ b/drivers/net/ethernet/intel/igb/e1000_phy.h
+@@ -62,8 +62,8 @@ void igb_power_up_phy_copper(struct e100
  void igb_power_down_phy_copper(struct e1000_hw *hw);
  s32  igb_phy_init_script_igp3(struct e1000_hw *hw);
  s32  igb_initialize_M88E1512_phy(struct e1000_hw *hw);
@@ -255,7 +249,7 @@ Index: linux-4.3/drivers/net/ethernet/intel/igb/e1000_phy.h
  s32  igb_read_phy_reg_i2c(struct e1000_hw *hw, u32 offset, u16 *data);
  s32  igb_write_phy_reg_i2c(struct e1000_hw *hw, u32 offset, u16 data);
  s32  igb_read_sfp_data_byte(struct e1000_hw *hw, u16 offset, u8 *data);
-@@ -73,6 +73,8 @@
+@@ -73,6 +73,8 @@ s32  igb_phy_force_speed_duplex_82580(st
  s32  igb_get_cable_length_82580(struct e1000_hw *hw);
  s32  igb_read_phy_reg_gs40g(struct e1000_hw *hw, u32 offset, u16 *data);
  s32  igb_write_phy_reg_gs40g(struct e1000_hw *hw, u32 offset, u16 data);

target/linux/imx6/patches-4.3/204-net-igb-register-mii_bus-for-SerDes-w-external-phy.patch

@@ -21,11 +21,9 @@ Signed-off-by: Tim Harvey <[email protected]>
  drivers/net/ethernet/intel/igb/igb_main.c    | 168 ++++++++++++++++++++++++++-
  3 files changed, 185 insertions(+), 5 deletions(-)
 
-Index: linux-4.3/drivers/net/ethernet/intel/igb/e1000_82575.c
-===================================================================
---- linux-4.3.orig/drivers/net/ethernet/intel/igb/e1000_82575.c	2015-12-18 10:39:44.935158318 -0800
-+++ linux-4.3/drivers/net/ethernet/intel/igb/e1000_82575.c	2015-12-18 10:39:44.943158318 -0800
-@@ -612,13 +612,25 @@
+--- a/drivers/net/ethernet/intel/igb/e1000_82575.c
++++ b/drivers/net/ethernet/intel/igb/e1000_82575.c
+@@ -612,13 +612,25 @@ static s32 igb_get_invariants_82575(stru
  	switch (link_mode) {
  	case E1000_CTRL_EXT_LINK_MODE_1000BASE_KX:
  		hw->phy.media_type = e1000_media_type_internal_serdes;
@@ -51,7 +49,7 @@ Index: linux-4.3/drivers/net/ethernet/intel/igb/e1000_82575.c
  		}
  		/* fall through for I2C based SGMII */
  	case E1000_CTRL_EXT_LINK_MODE_PCIE_SERDES:
-@@ -635,8 +647,11 @@
+@@ -635,8 +647,11 @@ static s32 igb_get_invariants_82575(stru
  				hw->phy.media_type = e1000_media_type_copper;
  				dev_spec->sgmii_active = true;
  			}
@@ -63,10 +61,8 @@ Index: linux-4.3/drivers/net/ethernet/intel/igb/e1000_82575.c
  		}
  
  		/* do not change link mode for 100BaseFX */
-Index: linux-4.3/drivers/net/ethernet/intel/igb/e1000_hw.h
-===================================================================
---- linux-4.3.orig/drivers/net/ethernet/intel/igb/e1000_hw.h	2015-11-01 16:05:25.000000000 -0800
-+++ linux-4.3/drivers/net/ethernet/intel/igb/e1000_hw.h	2015-12-18 10:39:44.943158318 -0800
+--- a/drivers/net/ethernet/intel/igb/e1000_hw.h
++++ b/drivers/net/ethernet/intel/igb/e1000_hw.h
 @@ -27,6 +27,7 @@
  #include <linux/delay.h>
  #include <linux/io.h>
@@ -75,7 +71,7 @@ Index: linux-4.3/drivers/net/ethernet/intel/igb/e1000_hw.h
  
  #include "e1000_regs.h"
  #include "e1000_defines.h"
-@@ -543,6 +544,12 @@
+@@ -543,6 +544,12 @@ struct e1000_hw {
  	struct e1000_mbx_info mbx;
  	struct e1000_host_mng_dhcp_cookie mng_cookie;
  
@@ -88,10 +84,8 @@ Index: linux-4.3/drivers/net/ethernet/intel/igb/e1000_hw.h
  	union {
  		struct e1000_dev_spec_82575	_82575;
  	} dev_spec;
-Index: linux-4.3/drivers/net/ethernet/intel/igb/igb_main.c
-===================================================================
---- linux-4.3.orig/drivers/net/ethernet/intel/igb/igb_main.c	2015-12-18 10:39:44.407158315 -0800
-+++ linux-4.3/drivers/net/ethernet/intel/igb/igb_main.c	2015-12-18 10:39:44.943158318 -0800
+--- a/drivers/net/ethernet/intel/igb/igb_main.c
++++ b/drivers/net/ethernet/intel/igb/igb_main.c
 @@ -41,6 +41,7 @@
  #include <linux/if_vlan.h>
  #include <linux/pci.h>
@@ -100,7 +94,7 @@ Index: linux-4.3/drivers/net/ethernet/intel/igb/igb_main.c
  #include <linux/delay.h>
  #include <linux/interrupt.h>
  #include <linux/ip.h>
-@@ -2223,6 +2224,126 @@
+@@ -2223,6 +2224,126 @@ static s32 igb_init_i2c(struct igb_adapt
  	return status;
  }
  
@@ -227,7 +221,7 @@ Index: linux-4.3/drivers/net/ethernet/intel/igb/igb_main.c
  /**
   *  igb_probe - Device Initialization Routine
   *  @pdev: PCI device information struct
-@@ -2645,6 +2766,13 @@
+@@ -2645,6 +2766,13 @@ static int igb_probe(struct pci_dev *pde
  		}
  	}
  	pm_runtime_put_noidle(&pdev->dev);
@@ -241,7 +235,7 @@ Index: linux-4.3/drivers/net/ethernet/intel/igb/igb_main.c
  	return 0;
  
  err_register:
-@@ -2792,6 +2920,10 @@
+@@ -2792,6 +2920,10 @@ static void igb_remove(struct pci_dev *p
  	struct e1000_hw *hw = &adapter->hw;
  
  	pm_runtime_get_noresume(&pdev->dev);
@@ -252,7 +246,7 @@ Index: linux-4.3/drivers/net/ethernet/intel/igb/igb_main.c
  #ifdef CONFIG_IGB_HWMON
  	igb_sysfs_exit(adapter);
  #endif
-@@ -3105,6 +3237,12 @@
+@@ -3105,6 +3237,12 @@ static int __igb_open(struct net_device
  	if (!resuming)
  		pm_runtime_put(&pdev->dev);
  
@@ -265,7 +259,7 @@ Index: linux-4.3/drivers/net/ethernet/intel/igb/igb_main.c
  	/* start the watchdog. */
  	hw->mac.get_link_status = 1;
  	schedule_work(&adapter->watchdog_task);
-@@ -7090,21 +7228,41 @@
+@@ -7090,21 +7228,41 @@ void igb_alloc_rx_buffers(struct igb_rin
  static int igb_mii_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
  {
  	struct igb_adapter *adapter = netdev_priv(netdev);

target/linux/imx6/patches-4.3/205-phy-add-driver-for-GW16083-Ethernet-Expansion-Mezzan.patch

@@ -1,8 +1,6 @@
-Index: linux-4.3/drivers/net/phy/Kconfig
-===================================================================
---- linux-4.3.orig/drivers/net/phy/Kconfig	2015-12-18 10:39:44.371158315 -0800
-+++ linux-4.3/drivers/net/phy/Kconfig	2015-12-18 10:39:44.951158318 -0800
-@@ -309,6 +309,14 @@
+--- a/drivers/net/phy/Kconfig
++++ b/drivers/net/phy/Kconfig
+@@ -309,6 +309,14 @@ endif # RTL8366_SMI
  
  source "drivers/net/phy/b53/Kconfig"
  
@@ -17,11 +15,9 @@ Index: linux-4.3/drivers/net/phy/Kconfig
  endif # PHYLIB
  
  config MICREL_KS8995MA
-Index: linux-4.3/drivers/net/phy/Makefile
-===================================================================
---- linux-4.3.orig/drivers/net/phy/Makefile	2015-12-18 10:39:44.371158315 -0800
-+++ linux-4.3/drivers/net/phy/Makefile	2015-12-18 10:39:44.951158318 -0800
-@@ -44,6 +44,7 @@
+--- a/drivers/net/phy/Makefile
++++ b/drivers/net/phy/Makefile
+@@ -44,6 +44,7 @@ obj-$(CONFIG_DP83848_PHY)	+= dp83848.o
  obj-$(CONFIG_DP83867_PHY)	+= dp83867.o
  obj-$(CONFIG_STE10XP)		+= ste10Xp.o
  obj-$(CONFIG_MICREL_PHY)	+= micrel.o

target/linux/imx6/patches-4.3/206-ARM-imx-ventana-added-GW16083-to-device-tree.patch

@@ -1,7 +1,5 @@
-Index: linux-4.3/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
-===================================================================
---- linux-4.3.orig/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi	2015-12-18 10:39:44.895158318 -0800
-+++ linux-4.3/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi	2015-12-18 10:43:21.000000000 -0800
+--- a/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
++++ b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
 @@ -158,6 +158,11 @@
  	pinctrl-names = "default";
  	pinctrl-0 = <&pinctrl_i2c2>;
@@ -14,10 +12,8 @@ Index: linux-4.3/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
  };
  
  &i2c3 {
-Index: linux-4.3/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
-===================================================================
---- linux-4.3.orig/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi	2015-12-18 10:39:44.907158318 -0800
-+++ linux-4.3/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi	2015-12-18 10:43:21.000000000 -0800
+--- a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
++++ b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
 @@ -233,6 +233,11 @@
  	pinctrl-names = "default";
  	pinctrl-0 = <&pinctrl_i2c2>;
@@ -30,10 +26,8 @@ Index: linux-4.3/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
  };
  
  &i2c3 {
-Index: linux-4.3/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
-===================================================================
---- linux-4.3.orig/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi	2015-12-18 10:39:44.899158318 -0800
-+++ linux-4.3/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi	2015-12-18 10:43:25.000000000 -0800
+--- a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
++++ b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
 @@ -226,6 +226,11 @@
  	pinctrl-names = "default";
  	pinctrl-0 = <&pinctrl_i2c2>;
@@ -46,10 +40,8 @@ Index: linux-4.3/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
  };
  
  &i2c3 {
-Index: linux-4.3/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
-===================================================================
---- linux-4.3.orig/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi	2015-12-18 10:39:44.899158318 -0800
-+++ linux-4.3/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi	2015-12-18 10:43:25.000000000 -0800
+--- a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
++++ b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
 @@ -317,6 +317,11 @@
  			};
  		};

target/linux/imx6/patches-4.3/207-i2c-imx-add-retries-for-NAK-s-on-ventana-boards.patch

@@ -1,8 +1,6 @@
-Index: linux-4.3/drivers/i2c/busses/i2c-imx.c
-===================================================================
---- linux-4.3.orig/drivers/i2c/busses/i2c-imx.c	2015-11-01 16:05:25.000000000 -0800
-+++ linux-4.3/drivers/i2c/busses/i2c-imx.c	2015-12-18 10:39:44.971158318 -0800
-@@ -461,6 +461,8 @@
+--- a/drivers/i2c/busses/i2c-imx.c
++++ b/drivers/i2c/busses/i2c-imx.c
+@@ -461,6 +461,8 @@ static int i2c_imx_acked(struct imx_i2c_
  {
  	if (imx_i2c_read_reg(i2c_imx, IMX_I2C_I2SR) & I2SR_RXAK) {
  		dev_dbg(&i2c_imx->adapter.dev, "<%s> No ACK\n", __func__);
@@ -11,7 +9,7 @@ Index: linux-4.3/drivers/i2c/busses/i2c-imx.c
  		return -EIO;  /* No ACK */
  	}
  
-@@ -1010,6 +1012,10 @@
+@@ -1010,6 +1012,10 @@ static int i2c_imx_probe(struct platform
  	i2c_imx->adapter.nr		= pdev->id;
  	i2c_imx->adapter.dev.of_node	= pdev->dev.of_node;
  	i2c_imx->base			= base;

target/linux/imx6/patches-4.3/208-sky2-allow-mac-to-come-from-dt.patch

@@ -1,8 +1,6 @@
-Index: linux-4.3/drivers/net/ethernet/marvell/sky2.c
-===================================================================
---- linux-4.3.orig/drivers/net/ethernet/marvell/sky2.c	2015-11-01 16:05:25.000000000 -0800
-+++ linux-4.3/drivers/net/ethernet/marvell/sky2.c	2015-12-18 10:39:44.983158318 -0800
-@@ -4812,7 +4812,24 @@
+--- a/drivers/net/ethernet/marvell/sky2.c
++++ b/drivers/net/ethernet/marvell/sky2.c
+@@ -4812,7 +4812,24 @@ static struct net_device *sky2_init_netd
  	 * 1) from device tree data
  	 * 2) from internal registers set by bootloader
  	 */

target/linux/imx6/patches-4.3/209-ARM-imx-ventana-add-sky2-alias.patch

@@ -1,7 +1,5 @@
-Index: linux-4.3/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
-===================================================================
---- linux-4.3.orig/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi	2015-12-18 10:39:44.959158318 -0800
-+++ linux-4.3/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi	2015-12-18 10:43:21.000000000 -0800
+--- a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
++++ b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
 @@ -15,6 +15,7 @@
  	/* these are used by bootloader for disabling nodes */
  	aliases {
@@ -10,10 +8,8 @@ Index: linux-4.3/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
  		led0 = &led0;
  		led1 = &led1;
  		led2 = &led2;
-Index: linux-4.3/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
-===================================================================
---- linux-4.3.orig/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi	2015-12-18 10:39:44.959158318 -0800
-+++ linux-4.3/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi	2015-12-18 10:43:21.000000000 -0800
+--- a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
++++ b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
 @@ -15,6 +15,7 @@
  	/* these are used by bootloader for disabling nodes */
  	aliases {

target/linux/octeon/patches-4.3/100-ubnt_edgerouter2_support.patch

@@ -1,31 +1,31 @@
 --- a/arch/mips/include/asm/octeon/cvmx-bootinfo.h
 +++ b/arch/mips/include/asm/octeon/cvmx-bootinfo.h
 @@ -283,6 +283,8 @@ enum cvmx_board_types_enum {
-	 */
-	CVMX_BOARD_TYPE_CUST_PRIVATE_MIN = 20001,
-	CVMX_BOARD_TYPE_UBNT_E100 = 20002,
+ 	 */
+ 	CVMX_BOARD_TYPE_CUST_PRIVATE_MIN = 20001,
+ 	CVMX_BOARD_TYPE_UBNT_E100 = 20002,
 +	CVMX_BOARD_TYPE_UBNT_E200 = 20003,
 +	CVMX_BOARD_TYPE_UBNT_E220 = 20005,
-	CVMX_BOARD_TYPE_CUST_DSR1000N = 20006,
-	CVMX_BOARD_TYPE_KONTRON_S1901 = 21901,
-	CVMX_BOARD_TYPE_CUST_PRIVATE_MAX = 30000,
+ 	CVMX_BOARD_TYPE_CUST_DSR1000N = 20006,
+ 	CVMX_BOARD_TYPE_KONTRON_S1901 = 21901,
+ 	CVMX_BOARD_TYPE_CUST_PRIVATE_MAX = 30000,
 @@ -384,6 +386,8 @@ static inline const char *cvmx_board_typ
-		    /* Customer private range */
-		ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_CUST_PRIVATE_MIN)
-		ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_UBNT_E100)
+ 		    /* Customer private range */
+ 		ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_CUST_PRIVATE_MIN)
+ 		ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_UBNT_E100)
 +		ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_UBNT_E200)
 +		ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_UBNT_E220)
-		ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_CUST_DSR1000N)
-		ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_KONTRON_S1901)
-		ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_CUST_PRIVATE_MAX)
+ 		ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_CUST_DSR1000N)
+ 		ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_KONTRON_S1901)
+ 		ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_CUST_PRIVATE_MAX)
 --- a/arch/mips/cavium-octeon/executive/cvmx-helper-board.c
 +++ b/arch/mips/cavium-octeon/executive/cvmx-helper-board.c
 @@ -195,6 +195,8 @@ int cvmx_helper_board_get_mii_address(in
-			return 8;
-		else
-			return -1;
+ 			return 8;
+ 		else
+ 			return -1;
 +	case CVMX_BOARD_TYPE_UBNT_E200:
 +		return -1;
-	case CVMX_BOARD_TYPE_KONTRON_S1901:
-		if (ipd_port == CVMX_HELPER_BOARD_MGMT_IPD_PORT)
-			return 1;
+ 	case CVMX_BOARD_TYPE_KONTRON_S1901:
+ 		if (ipd_port == CVMX_HELPER_BOARD_MGMT_IPD_PORT)
+ 			return 1;

target/linux/octeon/patches-4.3/110-er200-ethernet_probe_order.patch

@@ -1,17 +1,17 @@
 --- a/drivers/staging/octeon/ethernet.c
 +++ b/drivers/staging/octeon/ethernet.c
 @@ -663,6 +663,7 @@ static int cvm_oct_probe(struct platform
-	int interface;
-	int fau = FAU_NUM_PACKET_BUFFERS_TO_FREE;
-	int qos;
+ 	int interface;
+ 	int fau = FAU_NUM_PACKET_BUFFERS_TO_FREE;
+ 	int qos;
 +	int i;
-	struct device_node *pip;
-
-	octeon_mdiobus_force_mod_depencency();
+ 	struct device_node *pip;
+ 
+ 	octeon_mdiobus_force_mod_depencency();
 @@ -747,13 +748,19 @@ static int cvm_oct_probe(struct platform
-	}
-
-	num_interfaces = cvmx_helper_get_number_of_interfaces();
+ 	}
+ 
+ 	num_interfaces = cvmx_helper_get_number_of_interfaces();
 -	for (interface = 0; interface < num_interfaces; interface++) {
 -		cvmx_helper_interface_mode_t imode =
 -		    cvmx_helper_interface_get_mode(interface);
@@ -20,15 +20,15 @@
 +		cvmx_helper_interface_mode_t imode;
 +		int interface;
 +		int num_ports;
-		int port;
-		int port_index;
-
+ 		int port;
+ 		int port_index;
+ 
 +		interface = i;
 +		if (cvmx_sysinfo_get()->board_type == CVMX_BOARD_TYPE_UBNT_E200)
 +			interface = num_interfaces - (i + 1);
 +
 +		num_ports = cvmx_helper_ports_on_interface(interface);
 +		imode = cvmx_helper_interface_get_mode(interface);
-		for (port_index = 0,
-		     port = cvmx_helper_get_ipd_port(interface, 0);
-		     port < cvmx_helper_get_ipd_port(interface, num_ports);
+ 		for (port_index = 0,
+ 		     port = cvmx_helper_get_ipd_port(interface, 0);
+ 		     port < cvmx_helper_get_ipd_port(interface, num_ports);

target/linux/octeon/patches-4.3/150-mmc-octeon-add-host-driver-for-octeon-mmc-controller.patch

@@ -73,9 +73,9 @@
 --- a/drivers/mmc/host/Kconfig
 +++ b/drivers/mmc/host/Kconfig
 @@ -436,6 +436,16 @@ config MMC_MXS
-
-	  If unsure, say N.
-
+ 
+ 	  If unsure, say N.
+ 
 +config MMC_OCTEON
 +	tristate "Cavium OCTEON Multimedia Card Interface support"
 +	depends on CAVIUM_OCTEON_SOC
@@ -87,8 +87,8 @@
 +	  If unsure, say N.
 +
  config MMC_TIFM_SD
-	tristate "TI Flash Media MMC/SD Interface support"
-	depends on PCI
+ 	tristate "TI Flash Media MMC/SD Interface support"
+ 	depends on PCI
 --- a/drivers/mmc/host/Makefile
 +++ b/drivers/mmc/host/Makefile
 @@ -20,6 +20,7 @@ obj-$(CONFIG_MMC_SDHCI_F_SDH30)	+= sdhci

target/linux/octeon/patches-4.3/160-cmdline-hack.patch

@@ -1,9 +1,9 @@
 --- a/arch/mips/cavium-octeon/setup.c
 +++ b/arch/mips/cavium-octeon/setup.c
 @@ -611,6 +611,35 @@ void octeon_user_io_init(void)
-	write_c0_derraddr1(0);
+ 	write_c0_derraddr1(0);
  }
-
+ 
 +#ifdef CONFIG_IMAGE_CMDLINE_HACK
 +extern char __image_cmdline[];
 +
@@ -37,11 +37,11 @@
   * Early entry point for arch setup
   */
 @@ -842,6 +871,8 @@ void __init prom_init(void)
-		}
-	}
-
+ 		}
+ 	}
+ 
 +	octeon_use_image_cmdline();
 +
-	if (strstr(arcs_cmdline, "console=") == NULL) {
+ 	if (strstr(arcs_cmdline, "console=") == NULL) {
  #ifdef CONFIG_CAVIUM_OCTEON_2ND_KERNEL
-		strcat(arcs_cmdline, " console=ttyS0,115200");
+ 		strcat(arcs_cmdline, " console=ttyS0,115200");

target/linux/ramips/patches-4.3/0002-MIPS-ralink-add-MT7621-defconfig.patch

@@ -9,9 +9,6 @@ Signed-off-by: John Crispin <[email protected]>
  1 file changed, 197 insertions(+)
  create mode 100644 arch/mips/configs/mt7621_defconfig
 
-diff --git a/arch/mips/configs/mt7621_defconfig b/arch/mips/configs/mt7621_defconfig
-new file mode 100644
-index 0000000..7719471
 --- /dev/null
 +++ b/arch/mips/configs/mt7621_defconfig
 @@ -0,0 +1,197 @@
@@ -212,6 +209,3 @@ index 0000000..7719471
 +CONFIG_CRC32_SARWATE=y
 +# CONFIG_XZ_DEC_X86 is not set
 +CONFIG_AVERAGE=y
--- 
-1.7.10.4
-

target/linux/ramips/patches-4.3/0003-MIPS-ralink-cleanup-early_printk.patch

@@ -11,8 +11,6 @@ Signed-off-by: John Crispin <[email protected]>
  arch/mips/ralink/early_printk.c |   25 +++++++++++++++++++++++++
  1 file changed, 25 insertions(+)
 
-diff --git a/arch/mips/ralink/early_printk.c b/arch/mips/ralink/early_printk.c
-index 255d695..c04ee53 100644
 --- a/arch/mips/ralink/early_printk.c
 +++ b/arch/mips/ralink/early_printk.c
 @@ -25,11 +25,13 @@
@@ -61,6 +59,3 @@ index 255d695..c04ee53 100644
  	if (IS_ENABLED(CONFIG_SOC_MT7621) || soc_is_mt7628()) {
  		uart_w32(ch, UART_TX);
  		while ((uart_r32(UART_REG_LSR) & UART_LSR_THRE) == 0)
--- 
-1.7.10.4
-

target/linux/ramips/patches-4.3/0029-phy-usb-add-ralink-phy.patch

@@ -38,7 +38,7 @@ Signed-off-by: John Crispin <[email protected]>
 +};
 --- a/drivers/phy/Kconfig
 +++ b/drivers/phy/Kconfig
-@@ -331,6 +331,14 @@
+@@ -331,6 +331,14 @@ config PHY_XGENE
  	help
  	  This option enables support for APM X-Gene SoC multi-purpose PHY.
  
@@ -55,7 +55,7 @@ Signed-off-by: John Crispin <[email protected]>
  	depends on RESET_CONTROLLER
 --- a/drivers/phy/Makefile
 +++ b/drivers/phy/Makefile
-@@ -46,3 +46,4 @@
+@@ -46,3 +46,4 @@ obj-$(CONFIG_PHY_QCOM_UFS) 	+= phy-qcom-
  obj-$(CONFIG_PHY_TUSB1210)		+= phy-tusb1210.o
  obj-$(CONFIG_PHY_BRCMSTB_SATA)		+= phy-brcmstb-sata.o
  obj-$(CONFIG_PHY_PISTACHIO_USB)		+= phy-pistachio-usb.o

target/linux/ramips/patches-4.3/0033-USB-add-xhci-hooks.patch

@@ -5391,7 +5391,7 @@ Signed-off-by: John Crispin <[email protected]>
  /* TODO: copied from ehci-hcd.c - can this be refactored? */
  /*
   * xhci_handshake - spin reading hc until handshake completes or fails
-@@ -198,7 +220,7 @@ int xhci_reset(struct xhci_hcd *xhci)
+@@ -208,7 +230,7 @@ int xhci_reset(struct xhci_hcd *xhci)
  	return ret;
  }
  
@@ -5400,7 +5400,7 @@ Signed-off-by: John Crispin <[email protected]>
  static int xhci_free_msi(struct xhci_hcd *xhci)
  {
  	int i;
-@@ -448,6 +470,11 @@ static void compliance_mode_recovery(uns
+@@ -458,6 +480,11 @@ static void compliance_mode_recovery(uns
  					"Attempting compliance mode recovery");
  			hcd = xhci->shared_hcd;
  
@@ -5412,7 +5412,7 @@ Signed-off-by: John Crispin <[email protected]>
  			if (hcd->state == HC_STATE_SUSPENDED)
  				usb_hcd_resume_root_hub(hcd);
  
-@@ -495,6 +522,9 @@ static bool xhci_compliance_mode_recover
+@@ -505,6 +532,9 @@ static bool xhci_compliance_mode_recover
  {
  	const char *dmi_product_name, *dmi_sys_vendor;
  
@@ -5422,7 +5422,7 @@ Signed-off-by: John Crispin <[email protected]>
  	dmi_product_name = dmi_get_system_info(DMI_PRODUCT_NAME);
  	dmi_sys_vendor = dmi_get_system_info(DMI_SYS_VENDOR);
  	if (!dmi_product_name || !dmi_sys_vendor)
-@@ -540,6 +570,10 @@ int xhci_init(struct usb_hcd *hcd)
+@@ -550,6 +580,10 @@ int xhci_init(struct usb_hcd *hcd)
  		xhci_dbg_trace(xhci, trace_xhci_dbg_init,
  				"xHCI doesn't need link TRB QUIRK");
  	}
@@ -5433,7 +5433,7 @@ Signed-off-by: John Crispin <[email protected]>
  	retval = xhci_mem_init(xhci, GFP_KERNEL);
  	xhci_dbg_trace(xhci, trace_xhci_dbg_init, "Finished xhci_init");
  
-@@ -624,7 +658,11 @@ int xhci_run(struct usb_hcd *hcd)
+@@ -634,7 +668,11 @@ int xhci_run(struct usb_hcd *hcd)
  			"// Set the interrupt modulation register");
  	temp = readl(&xhci->ir_set->irq_control);
  	temp &= ~ER_IRQ_INTERVAL_MASK;
@@ -5445,7 +5445,7 @@ Signed-off-by: John Crispin <[email protected]>
  	writel(temp, &xhci->ir_set->irq_control);
  
  	/* Set the HCD state before we enable the irqs */
-@@ -649,6 +687,9 @@ int xhci_run(struct usb_hcd *hcd)
+@@ -659,6 +697,9 @@ int xhci_run(struct usb_hcd *hcd)
  		xhci_queue_vendor_command(xhci, command, 0, 0, 0,
  				TRB_TYPE(TRB_NEC_GET_FW));
  	}
@@ -5455,7 +5455,7 @@ Signed-off-by: John Crispin <[email protected]>
  	xhci_dbg_trace(xhci, trace_xhci_dbg_init,
  			"Finished xhci_run for USB2 roothub");
  	return 0;
-@@ -1639,6 +1680,14 @@ int xhci_drop_endpoint(struct usb_hcd *h
+@@ -1649,6 +1690,14 @@ int xhci_drop_endpoint(struct usb_hcd *h
  	u32 drop_flag;
  	u32 new_add_flags, new_drop_flags;
  	int ret;
@@ -5470,7 +5470,7 @@ Signed-off-by: John Crispin <[email protected]>
  
  	ret = xhci_check_args(hcd, udev, ep, 1, true, __func__);
  	if (ret <= 0)
-@@ -1688,6 +1737,40 @@ int xhci_drop_endpoint(struct usb_hcd *h
+@@ -1698,6 +1747,40 @@ int xhci_drop_endpoint(struct usb_hcd *h
  
  	xhci_endpoint_zero(xhci, xhci->devs[udev->slot_id], ep);
  
@@ -5511,7 +5511,7 @@ Signed-off-by: John Crispin <[email protected]>
  	xhci_dbg(xhci, "drop ep 0x%x, slot id %d, new drop flags = %#x, new add flags = %#x\n",
  			(unsigned int) ep->desc.bEndpointAddress,
  			udev->slot_id,
-@@ -1720,6 +1803,19 @@ int xhci_add_endpoint(struct usb_hcd *hc
+@@ -1730,6 +1813,19 @@ int xhci_add_endpoint(struct usb_hcd *hc
  	u32 new_add_flags, new_drop_flags;
  	struct xhci_virt_device *virt_dev;
  	int ret = 0;
@@ -5531,7 +5531,7 @@ Signed-off-by: John Crispin <[email protected]>
  
  	ret = xhci_check_args(hcd, udev, ep, 1, true, __func__);
  	if (ret <= 0) {
-@@ -1783,6 +1879,56 @@ int xhci_add_endpoint(struct usb_hcd *hc
+@@ -1793,6 +1889,56 @@ int xhci_add_endpoint(struct usb_hcd *hc
  		return -ENOMEM;
  	}
  
@@ -5588,7 +5588,7 @@ Signed-off-by: John Crispin <[email protected]>
  	ctrl_ctx->add_flags |= cpu_to_le32(added_ctxs);
  	new_add_flags = le32_to_cpu(ctrl_ctx->add_flags);
  
-@@ -4446,8 +4592,14 @@ static u16 xhci_call_host_update_timeout
+@@ -4456,8 +4602,14 @@ static u16 xhci_call_host_update_timeout
  		u16 *timeout)
  {
  	if (state == USB3_LPM_U1)
@@ -5603,7 +5603,7 @@ Signed-off-by: John Crispin <[email protected]>
  		return xhci_calculate_u2_timeout(xhci, udev, desc);
  
  	return USB3_LPM_DISABLED;
-@@ -4839,7 +4991,9 @@ int xhci_gen_setup(struct usb_hcd *hcd,
+@@ -4849,7 +5001,9 @@ int xhci_gen_setup(struct usb_hcd *hcd,
  	hcd->self.no_sg_constraint = 1;
  
  	/* XHCI controllers don't stop the ep queue on short packets :| */
@@ -5613,7 +5613,7 @@ Signed-off-by: John Crispin <[email protected]>
  
  	if (usb_hcd_is_primary_hcd(hcd)) {
  		xhci = hcd_to_xhci(hcd);
-@@ -4900,6 +5054,10 @@ int xhci_gen_setup(struct usb_hcd *hcd,
+@@ -4910,6 +5064,10 @@ int xhci_gen_setup(struct usb_hcd *hcd,
  		return retval;
  	xhci_dbg(xhci, "Reset complete\n");
  
@@ -5624,7 +5624,7 @@ Signed-off-by: John Crispin <[email protected]>
  	/* Set dma_mask and coherent_dma_mask to 64-bits,
  	 * if xHC supports 64-bit addressing */
  	if (HCC_64BIT_ADDR(xhci->hcc_params) &&
-@@ -5005,8 +5163,57 @@ MODULE_DESCRIPTION(DRIVER_DESC);
+@@ -5015,8 +5173,57 @@ MODULE_DESCRIPTION(DRIVER_DESC);
  MODULE_AUTHOR(DRIVER_AUTHOR);
  MODULE_LICENSE("GPL");
  

target/linux/ramips/patches-4.3/0065-mt7688-fixes.patch

@@ -1,6 +1,6 @@
 --- a/arch/mips/ralink/mt7620.c
 +++ b/arch/mips/ralink/mt7620.c
-@@ -104,31 +104,31 @@
+@@ -104,31 +104,31 @@ static struct rt2880_pmx_group mt7620a_p
  };
  
  static struct rt2880_pmx_func pwm1_grp_mt7628[] = {
@@ -37,7 +37,7 @@
  };
  
  static struct rt2880_pmx_func i2c_grp_mt7628[] = {
-@@ -140,21 +140,21 @@
+@@ -140,21 +140,21 @@ static struct rt2880_pmx_func i2c_grp_mt
  
  static struct rt2880_pmx_func refclk_grp_mt7628[] = { FUNC("reclk", 0, 36, 1) };
  static struct rt2880_pmx_func perst_grp_mt7628[] = { FUNC("perst", 0, 37, 1) };
@@ -62,7 +62,7 @@
  };
  
  static struct rt2880_pmx_func i2s_grp_mt7628[] = {
-@@ -449,6 +449,8 @@
+@@ -449,6 +449,8 @@ void __init ralink_clk_init(void)
  	ralink_clk_add("10000b00.spi", sys_rate);
  	ralink_clk_add("10000b40.spi", sys_rate);
  	ralink_clk_add("10000c00.uartlite", periph_rate);
@@ -71,7 +71,7 @@
  	ralink_clk_add("10180000.wmac", xtal_rate);
  
  	if (IS_ENABLED(CONFIG_USB) &&
-@@ -571,13 +573,13 @@
+@@ -571,13 +573,13 @@ void prom_soc_init(struct ralink_soc_inf
  
  	cfg0 = __raw_readl(sysc + SYSC_REG_SYSTEM_CONFIG0);