Revert "ath79: add support for Mikrotik LHG 5"

This reverts commit 48774decea9b42e97edd53ce33e574de7d85f3df.

This commit does not contain a valid name in the Signed-off-by line.

Signed-off-by: Hauke Mehrtens <[email protected]>

target/linux/ath79/dts/ar9344_mikrotik_routerboard-16m-nor.dtsi

@@ -1,65 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-#include "ar9344.dtsi"
-
-&spi {
-	status = "okay";
-
-	flash@0 {
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <40000000>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "RouterBoot";
-				reg = <0x0 0x20000>;
-				read-only;
-				compatible = "mikrotik,routerboot-partitions";
-				#address-cells = <1>;
-				#size-cells = <1>;
-
-				partition@0 {
-					label = "bootloader1";
-					reg = <0x0 0x0>;
-					read-only;
-				};
-
-				hard_config: hard_config {
-					read-only;
-				};
-
-				bios {
-					size = <0x1000>;
-					read-only;
-				};
-
-				partition@10000 {
-					label = "bootloader2";
-					reg = <0x10000 0x0>;
-					read-only;
-				};
-
-				soft_config {
-					label = "soft_config";
-				};
-			};
-
-			partition@20000 {
-				compatible = "mikrotik,minor";
-				label = "firmware";
-				reg = <0x020000 0xfe0000>;
-			};
-		};
-	};
-};
-
-&wmac {
-	status = "okay";
-
-	qca,no-eeprom;
-};

target/linux/ath79/dts/ar9344_mikrotik_routerboard-lhg-5nd.dts

@@ -1,91 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-#include "ar9344_mikrotik_routerboard-16m-nor.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
-	compatible = "mikrotik,routerboard-lhg-5nd", "qca,ar9344";
-	model = "MikroTik LHG 5nD platform";
-
-	aliases {
-		led-boot = &led_user;
-		led-failsafe = &led_user;
-		led-running = &led_user;
-		led-upgrade = &led_user;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		power {
-			label = "blue:power";
-			gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
-			default-state = "on";
-		};
-
-		rssilow {
-			label = "green:rssilow";
-			gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
-		};
-
-		rssimediumlow {
-			label = "green:rssimediumlow";
-			gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
-		};
-
-		rssimedium {
-			label = "green:rssimedium";
-			gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
-		};
-
-		rssimediumhigh {
-			label = "green:rssimediumhigh";
-			gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
-		};
-
-		rssihigh {
-			label = "green:rssihigh";
-			gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
-		};
-
-		led_user: user {
-			label = "white:user";
-			gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
-		};
-
-		lan {
-			label = "green:lan";
-			gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	keys {
-		compatible = "gpio-keys";
-
-		reset {
-			label = "reset";
-			linux,code = <KEY_RESTART>;
-			gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
-			debounce-interval = <60>;
-		};
-	};
-};
-
-&eth0 {
-	status = "okay";
-
-	phy-handle = <&swphy0>;
-
-	gmac-config {
-		device = <&gmac>;
-		switch-phy-swap = <1>;
-	};
-};
-
-&eth1 {
-	status = "okay";
-
-	compatible = "syscon", "simple-mfd";
-};

target/linux/ath79/image/mikrotik.mk

@@ -46,15 +46,6 @@ define Device/mikrotik_routerboard-lhg-2nd
 endef
 TARGET_DEVICES += mikrotik_routerboard-lhg-2nd
 
-define Device/mikrotik_routerboard-lhg-5nd
-  $(Device/mikrotik_nor)
-  SOC := ar9344
-  DEVICE_MODEL := RouterBOARD LHG 5nD (LHG 5)
-  DEVICE_PACKAGES += rssileds
-  IMAGE_SIZE := 16256k
-endef
-TARGET_DEVICES += mikrotik_routerboard-lhg-5nd
-
 define Device/mikrotik_routerboard-sxt-5nd-r2
   $(Device/mikrotik_nand)
   SOC := ar9344

target/linux/ath79/mikrotik/base-files/etc/board.d/01_leds

@@ -9,15 +9,6 @@ case "$board" in
 mikrotik,routerboard-lhg-2nd)
 	ucidef_set_led_netdev "lan" "lan" "green:lan" "eth0"
 	;;
-mikrotik,routerboard-lhg-5nd)
-	ucidef_set_led_netdev "lan" "lan" "green:lan" "eth0"
-	ucidef_set_rssimon "wlan0" "200000" "1"
-	ucidef_set_led_rssi "rssilow" "rssilow" "green:rssilow" "wlan0" "1" "100"
-	ucidef_set_led_rssi "rssimediumlow" "rssimediumlow" "green:rssimediumlow" "wlan0" "20" "100"
-	ucidef_set_led_rssi "rssimedium" "rssimedium" "green:rssimedium" "wlan0" "40" "100"
-	ucidef_set_led_rssi "rssimediumhigh" "rssimediumhigh" "green:rssimediumhigh" "wlan0" "60" "100"
-	ucidef_set_led_rssi "rssihigh" "rssihigh" "green:rssihigh" "wlan0" "80" "100"
-	;;
 mikrotik,routerboard-wapr-2nd)
 	ucidef_set_rssimon "wlan0" "200000" "1"
 	ucidef_set_led_rssi "rssilow" "rssilow" "green:rssilow" "wlan0" "1" "100"

target/linux/ath79/mikrotik/base-files/etc/board.d/02_network

@@ -16,7 +16,6 @@ ath79_setup_interfaces()
 		;;
 	mikrotik,routerboard-912uag-2hpnd|\
 	mikrotik,routerboard-lhg-2nd|\
-	mikrotik,routerboard-lhg-5nd|\
 	mikrotik,routerboard-sxt-5nd-r2|\
 	mikrotik,routerboard-wap-g-5hact2hnd|\
 	mikrotik,routerboard-wapr-2nd)
@@ -39,7 +38,6 @@ ath79_setup_macs()
 	case "$board" in
 	mikrotik,routerboard-912uag-2hpnd|\
 	mikrotik,routerboard-lhg-2nd|\
-	mikrotik,routerboard-lhg-5nd|\
 	mikrotik,routerboard-sxt-5nd-r2|\
 	mikrotik,routerboard-wap-g-5hact2hnd|\
 	mikrotik,routerboard-wapr-2nd)

target/linux/ath79/mikrotik/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom

@@ -25,7 +25,6 @@ case "$FIRMWARE" in
 	case $board in
 	mikrotik,routerboard-912uag-2hpnd|\
 	mikrotik,routerboard-lhg-2nd|\
-	mikrotik,routerboard-lhg-5nd|\
 	mikrotik,routerboard-sxt-5nd-r2|\
 	mikrotik,routerboard-wapr-2nd)
 		caldata_mikrotik_ath9k 0x1000 0x440 $(macaddr_add "$mac_base" 1)