ltq-vdsl-vr11-app: perform orderly shutdown on exit

Try to do a clean disconnection via L3 request before the connection is
stopped.

Because this might take up to 6 seconds (the driver does 3 attempts with
a timeout of 2 seconds each), a termination timeout needs to be defined
in the init script.

Signed-off-by: Jan Hoffmann <[email protected]>

package/network/config/ltq-vdsl-vr11-app/Makefile

@@ -9,7 +9,7 @@ include $(INCLUDE_DIR)/kernel.mk
 
 PKG_NAME:=ltq-vdsl-vr11-app
 PKG_VERSION:=4.23.1
-PKG_RELEASE:=4
+PKG_RELEASE:=5
 PKG_BASE_NAME:=dsl_cpe_control
 
 UGW_VERSION=8.5.2.10

package/network/config/ltq-vdsl-vr11-app/files/dsl_control

@@ -254,6 +254,7 @@ start_service() {
 			${mode} \
 			${tc_layer} \
 			$autoboot
+	procd_set_param term_timeout 10
 	procd_close_instance
 }
 

package/network/config/ltq-vdsl-vr11-app/patches/201-orderly-shutdown.patch

@@ -0,0 +1,73 @@
+Try to perform an orderly shutdown via L3 request before the connection
+is stopped on exit.
+
+--- a/src/dsl_cpe_control.c
++++ b/src/dsl_cpe_control.c
+@@ -7252,15 +7252,58 @@ static DSL_boolean_t DSL_CPE_DebugAndTes
+ #endif /* defined(DSL_DEBUG_TOOL_INTERFACE) || defined(INCLUDE_DSL_CPE_DTI_SUPPORT) */
+ #endif /* defined(INCLUDE_DSL_JSON_PARSING) && (INCLUDE_DSL_JSON_PARSING == 1) */
+ 
++DSL_CPE_STATIC DSL_void_t DSL_CPE_EnableConnection(void)
++{
++   DSL_Error_t nRet = DSL_SUCCESS;
++   DSL_int_t nDevice = 0;
++   DSL_G997_PowerManagementStateForcedTrigger_t sPowerManagementStateForcedTrigger;
++
++   for (nDevice = 0; nDevice < DSL_CPE_DSL_ENTITIES; ++nDevice)
++   {
++      memset(&sPowerManagementStateForcedTrigger, 0x0,
++         sizeof(DSL_G997_PowerManagementStateForcedTrigger_t));
++      sPowerManagementStateForcedTrigger.data.nPowerManagementState = DSL_G997_PMSF_L3_TO_L0;
++
++      nRet = (DSL_Error_t)DSL_CPE_Ioctl(
++         DSL_CPE_GetGlobalContext()->fd[nDevice],
++         DSL_FIO_G997_POWER_MANAGEMENT_STATE_FORCED_TRIGGER,
++         (DSL_int_t)&sPowerManagementStateForcedTrigger);
++
++      if (nRet < DSL_SUCCESS)
++      {
++         DSL_CCA_DEBUG(DSL_CCA_DBG_ERR, (DSL_CPE_PREFIX
++            "Transition to L0 state (%d) failed!, nRet = %d!"
++            DSL_CPE_CRLF, nDevice, sPowerManagementStateForcedTrigger.accessCtl.nReturn));
++      }
++   }
++}
++
+ DSL_CPE_STATIC DSL_void_t DSL_CPE_ShutdownConnection(void)
+ {
+    DSL_Error_t nRet = DSL_SUCCESS;
+    DSL_int_t nDevice = 0;
++   DSL_G997_PowerManagementStateForcedTrigger_t sPowerManagementStateForcedTrigger;
+    DSL_AutobootConfig_t sAutobootCfg;
+    DSL_AutobootControl_t sAutobootCtl;
+ 
+    for (nDevice = 0; nDevice < DSL_CPE_DSL_ENTITIES; ++nDevice)
+    {
++      memset(&sPowerManagementStateForcedTrigger, 0x0,
++         sizeof(DSL_G997_PowerManagementStateForcedTrigger_t));
++      sPowerManagementStateForcedTrigger.data.nPowerManagementState = DSL_G997_PMSF_LX_TO_L3;
++
++      nRet = (DSL_Error_t)DSL_CPE_Ioctl(
++         DSL_CPE_GetGlobalContext()->fd[nDevice],
++         DSL_FIO_G997_POWER_MANAGEMENT_STATE_FORCED_TRIGGER,
++         (DSL_int_t)&sPowerManagementStateForcedTrigger);
++
++      if (nRet < DSL_SUCCESS)
++      {
++         DSL_CCA_DEBUG(DSL_CCA_DBG_ERR, (DSL_CPE_PREFIX
++            "Transition to L3 state (%d) failed!, nRet = %d!"
++            DSL_CPE_CRLF, nDevice, sPowerManagementStateForcedTrigger.accessCtl.nReturn));
++      }
++
+       g_bWaitBeforeConfigWrite[nDevice]    = DSL_TRUE;
+       g_bWaitBeforeLinkActivation[nDevice] = DSL_TRUE;
+       g_bWaitBeforeRestart[nDevice]        = DSL_TRUE;
+@@ -8318,6 +8361,8 @@ DSL_int_t dsl_cpe_daemon (
+ #endif /* defined(INCLUDE_DSL_JSON_PARSING) && (INCLUDE_DSL_JSON_PARSING == 1) */
+    }
+ 
++   DSL_CPE_EnableConnection();
++
+ #ifdef INCLUDE_DSL_CPE_CLI_SUPPORT
+ #ifndef DSL_CPE_REMOVE_PIPE_SUPPORT
+    if (DSL_CPE_Pipe_Init (pCtrlCtx) == DSL_ERROR)

package/network/config/ltq-vdsl-vr11-app/patches/300-ubus.patch

@@ -10,7 +10,7 @@
  DSL_char_t *g_sFirmwareName1 = DSL_NULL;
  DSL_FirmwareFeatures_t g_nFwFeatures1 = {DSL_FW_XDSLMODE_CLEANED, DSL_FW_XDSLFEATURE_CLEANED,
     DSL_FW_XDSLFEATURE_CLEANED};
-@@ -7839,6 +7842,8 @@ DSL_int_t dsl_cpe_daemon (
+@@ -7882,6 +7885,8 @@ DSL_int_t dsl_cpe_daemon (
  #endif /* defined(INCLUDE_DSL_JSON_PARSING) && (INCLUDE_DSL_JSON_PARSING == 1) */
  #endif /* RTEMS*/
  
@@ -19,7 +19,7 @@
     /* Open DSL_CPE_MAX_DSL_ENTITIES devices*/
     for (nDevice = 0; nDevice < DSL_CPE_DSL_ENTITIES; nDevice++)
     {
-@@ -8375,6 +8380,7 @@ DSL_int_t dsl_cpe_daemon (
+@@ -8420,6 +8425,7 @@ DSL_int_t dsl_cpe_daemon (
  #endif /* INCLUDE_DSL_CPE_CLI_SUPPORT */
  
  DSL_CPE_CONTROL_EXIT: