kernel: rename B53 symbols to avoid upstream kernel conflict

In kernel 4.7 there is upstreamed b53 driver using (mostly?) the same
symbols as our b53 does. Change our symbols so both drivers can coexist
in kernel tree.

Signed-off-by: Rafał Miłecki <[email protected]>
Acked-by: Jonas Gorski <[email protected]>

target/linux/bcm53xx/config-4.4

@@ -54,10 +54,10 @@ CONFIG_ARM_THUMB=y
 CONFIG_ARM_VIRT_EXT=y
 CONFIG_ATAGS=y
 CONFIG_AUTO_ZRELADDR=y
-CONFIG_B53=y
-# CONFIG_B53_MMAP_DRIVER is not set
-# CONFIG_B53_PHY_DRIVER is not set
-CONFIG_B53_SRAB_DRIVER=y
+CONFIG_SWCONFIG_B53=y
+# CONFIG_SWCONFIG_B53_MMAP_DRIVER is not set
+# CONFIG_SWCONFIG_B53_PHY_DRIVER is not set
+CONFIG_SWCONFIG_B53_SRAB_DRIVER=y
 CONFIG_BCM47XX_NVRAM=y
 CONFIG_BCM47XX_SPROM=y
 CONFIG_BCM47XX_WDT=y

target/linux/brcm47xx/config-4.1

@@ -12,11 +12,11 @@ CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-CONFIG_B53=y
-# CONFIG_B53_MMAP_DRIVER is not set
-CONFIG_B53_PHY_DRIVER=y
-CONFIG_B53_PHY_FIXUP=y
-# CONFIG_B53_SRAB_DRIVER is not set
+CONFIG_SWCONFIG_B53=y
+# CONFIG_SWCONFIG_B53_MMAP_DRIVER is not set
+CONFIG_SWCONFIG_B53_PHY_DRIVER=y
+CONFIG_SWCONFIG_B53_PHY_FIXUP=y
+# CONFIG_SWCONFIG_B53_SRAB_DRIVER is not set
 CONFIG_BCM47XX=y
 CONFIG_BCM47XX_BCMA=y
 CONFIG_BCM47XX_SSB=y

target/linux/brcm47xx/config-4.4

@@ -14,11 +14,11 @@ CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_ARCH_USE_BUILTIN_BSWAP=y
 CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-CONFIG_B53=y
-# CONFIG_B53_MMAP_DRIVER is not set
-CONFIG_B53_PHY_DRIVER=y
-CONFIG_B53_PHY_FIXUP=y
-# CONFIG_B53_SRAB_DRIVER is not set
+CONFIG_SWCONFIG_B53=y
+# CONFIG_SWCONFIG_B53_MMAP_DRIVER is not set
+CONFIG_SWCONFIG_B53_PHY_DRIVER=y
+CONFIG_SWCONFIG_B53_PHY_FIXUP=y
+# CONFIG_SWCONFIG_B53_SRAB_DRIVER is not set
 CONFIG_BCM47XX=y
 CONFIG_BCM47XX_BCMA=y
 CONFIG_BCM47XX_NVRAM=y

target/linux/brcm63xx/config-4.4

@@ -13,12 +13,12 @@ CONFIG_ARCH_SUPPORTS_UPROBES=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_ARCH_USE_BUILTIN_BSWAP=y
 CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
-CONFIG_B53=y
-CONFIG_B53_MMAP_DRIVER=y
-CONFIG_B53_PHY_DRIVER=y
-CONFIG_B53_PHY_FIXUP=y
-CONFIG_B53_SPI_DRIVER=y
-# CONFIG_B53_SRAB_DRIVER is not set
+CONFIG_SWCONFIG_B53=y
+CONFIG_SWCONFIG_B53_MMAP_DRIVER=y
+CONFIG_SWCONFIG_B53_PHY_DRIVER=y
+CONFIG_SWCONFIG_B53_PHY_FIXUP=y
+CONFIG_SWCONFIG_B53_SPI_DRIVER=y
+# CONFIG_SWCONFIG_B53_SRAB_DRIVER is not set
 CONFIG_BCM6345_EXT_IRQ=y
 CONFIG_BCM6345_PERIPH_IRQ=y
 CONFIG_BCM63XX=y

target/linux/generic/config-3.18

@@ -330,8 +330,8 @@ CONFIG_ATM_CLIP_NO_ICMP=y
 # CONFIG_B43 is not set
 # CONFIG_B43LEGACY is not set
 # CONFIG_B44 is not set
-# CONFIG_B53 is not set
-# CONFIG_B53_SPI_DRIVER is not set
+# CONFIG_SWCONFIG_B53 is not set
+# CONFIG_SWCONFIG_B53_SPI_DRIVER is not set
 # CONFIG_BACKLIGHT_BD6107 is not set
 # CONFIG_BACKLIGHT_GPIO is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set

target/linux/generic/config-4.1

@@ -344,8 +344,8 @@ CONFIG_ATM_CLIP_NO_ICMP=y
 # CONFIG_B43 is not set
 # CONFIG_B43LEGACY is not set
 # CONFIG_B44 is not set
-# CONFIG_B53 is not set
-# CONFIG_B53_SPI_DRIVER is not set
+# CONFIG_SWCONFIG_B53 is not set
+# CONFIG_SWCONFIG_B53_SPI_DRIVER is not set
 # CONFIG_BACKLIGHT_ADP8860 is not set 
 # CONFIG_BACKLIGHT_ADP8870 is not set
 # CONFIG_BACKLIGHT_BD6107 is not set

target/linux/generic/config-4.4

@@ -321,8 +321,8 @@ CONFIG_ATM_CLIP_NO_ICMP=y
 # CONFIG_B43 is not set
 # CONFIG_B43LEGACY is not set
 # CONFIG_B44 is not set
-# CONFIG_B53 is not set
-# CONFIG_B53_SPI_DRIVER is not set
+# CONFIG_SWCONFIG_B53 is not set
+# CONFIG_SWCONFIG_B53_SPI_DRIVER is not set
 # CONFIG_BACKLIGHT_ADP8860 is not set
 # CONFIG_BACKLIGHT_ADP8870 is not set
 # CONFIG_BACKLIGHT_BD6107 is not set

target/linux/generic/files/drivers/net/phy/b53/Kconfig

@@ -1,4 +1,4 @@
-menuconfig B53
+menuconfig SWCONFIG_B53
 	tristate "Broadcom bcm53xx managed switch support"
 	depends on SWCONFIG
 	help
@@ -6,32 +6,32 @@ menuconfig B53
 	  BCM5325E, BCM5365, BCM539x, BCM53115 and BCM53125 as well as BCM63XX
 	  integrated switches.
 
-config B53_SPI_DRIVER
+config SWCONFIG_B53_SPI_DRIVER
 	tristate "B53 SPI connected switch driver"
-	depends on B53 && SPI
+	depends on SWCONFIG_B53 && SPI
 	help
 	  Select to enable support for registering switches configured through SPI.
 
-config B53_PHY_DRIVER
+config SWCONFIG_B53_PHY_DRIVER
 	tristate "B53 MDIO connected switch driver"
-	depends on B53
-	select B53_PHY_FIXUP
+	depends on SWCONFIG_B53
+	select SWCONFIG_B53_PHY_FIXUP
 	help
 	  Select to enable support for registering switches configured through MDIO.
 
-config B53_MMAP_DRIVER
+config SWCONFIG_B53_MMAP_DRIVER
 	tristate "B53 MMAP connected switch driver"
-	depends on B53
+	depends on SWCONFIG_B53
 	help
 	  Select to enable support for memory-mapped switches like the BCM63XX
 	  integrated switches.
 
-config B53_SRAB_DRIVER
+config SWCONFIG_B53_SRAB_DRIVER
 	tristate "B53 SRAB connected switch driver"
-	depends on B53
+	depends on SWCONFIG_B53
 	help
 	  Select to enable support for memory-mapped Switch Register Access
 	  Bridge Registers (SRAB) like it is found on the BCM53010
 
-config B53_PHY_FIXUP
+config SWCONFIG_B53_PHY_FIXUP
 	bool

target/linux/generic/files/drivers/net/phy/b53/Makefile

@@ -1,10 +1,10 @@
-obj-$(CONFIG_B53)		+= b53_common.o
+obj-$(CONFIG_SWCONFIG_B53)		+= b53_common.o
 
-obj-$(CONFIG_B53_PHY_FIXUP)	+= b53_phy_fixup.o
+obj-$(CONFIG_SWCONFIG_B53_PHY_FIXUP)	+= b53_phy_fixup.o
 
-obj-$(CONFIG_B53_MMAP_DRIVER)	+= b53_mmap.o
-obj-$(CONFIG_B53_SRAB_DRIVER)	+= b53_srab.o
-obj-$(CONFIG_B53_PHY_DRIVER)	+= b53_mdio.o
-obj-$(CONFIG_B53_SPI_DRIVER)	+= b53_spi.o
+obj-$(CONFIG_SWCONFIG_B53_MMAP_DRIVER)	+= b53_mmap.o
+obj-$(CONFIG_SWCONFIG_B53_SRAB_DRIVER)	+= b53_srab.o
+obj-$(CONFIG_SWCONFIG_B53_PHY_DRIVER)	+= b53_mdio.o
+obj-$(CONFIG_SWCONFIG_B53_SPI_DRIVER)	+= b53_spi.o
 
-ccflags-y			+= -Werror
+ccflags-y				+= -Werror

target/linux/generic/patches-3.18/730-phy_b53.patch

@@ -15,7 +15,7 @@
  obj-$(CONFIG_RTL8367B_PHY)	+= rtl8367b.o
  obj-$(CONFIG_LSI_ET1011C_PHY)	+= et1011c.o
  obj-$(CONFIG_PSB6970_PHY)	+= psb6970.o
-+obj-$(CONFIG_B53)		+= b53/
++obj-$(CONFIG_SWCONFIG_B53)	+= b53/
  obj-$(CONFIG_FIXED_PHY)		+= fixed.o
  obj-$(CONFIG_MDIO_BITBANG)	+= mdio-bitbang.o
  obj-$(CONFIG_MDIO_GPIO)		+= mdio-gpio.o

target/linux/generic/patches-4.1/730-phy_b53.patch

@@ -15,7 +15,7 @@
  obj-$(CONFIG_RTL8367B_PHY)	+= rtl8367b.o
  obj-$(CONFIG_LSI_ET1011C_PHY)	+= et1011c.o
  obj-$(CONFIG_PSB6970_PHY)	+= psb6970.o
-+obj-$(CONFIG_B53)		+= b53/
++obj-$(CONFIG_SWCONFIG_B53)	+= b53/
  obj-$(CONFIG_FIXED_PHY)		+= fixed_phy.o
  obj-$(CONFIG_MDIO_BITBANG)	+= mdio-bitbang.o
  obj-$(CONFIG_MDIO_GPIO)		+= mdio-gpio.o

target/linux/generic/patches-4.4/730-phy_b53.patch

@@ -15,7 +15,7 @@
  obj-$(CONFIG_RTL8367B_PHY)	+= rtl8367b.o
  obj-$(CONFIG_LSI_ET1011C_PHY)	+= et1011c.o
  obj-$(CONFIG_PSB6970_PHY)	+= psb6970.o
-+obj-$(CONFIG_B53)		+= b53/
++obj-$(CONFIG_SWCONFIG_B53)	+= b53/
  obj-$(CONFIG_FIXED_PHY)		+= fixed_phy.o
  obj-$(CONFIG_MDIO_BITBANG)	+= mdio-bitbang.o
  obj-$(CONFIG_MDIO_GPIO)		+= mdio-gpio.o

target/linux/sunxi/config-4.4

@@ -57,11 +57,11 @@ CONFIG_AUDIT=y
 CONFIG_AUDIT_GENERIC=y
 CONFIG_AUTO_ZRELADDR=y
 CONFIG_AXP20X_POWER=y
-CONFIG_B53=y
-# CONFIG_B53_MMAP_DRIVER is not set
-CONFIG_B53_PHY_DRIVER=y
-CONFIG_B53_PHY_FIXUP=y
-# CONFIG_B53_SRAB_DRIVER is not set
+CONFIG_SWCONFIG_B53=y
+# CONFIG_SWCONFIG_B53_MMAP_DRIVER is not set
+CONFIG_SWCONFIG_B53_PHY_DRIVER=y
+CONFIG_SWCONFIG_B53_PHY_FIXUP=y
+# CONFIG_SWCONFIG_B53_SRAB_DRIVER is not set
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_BACKLIGHT_PWM=y