|
|
@@ -1,17 +1,58 @@
|
|
|
+define Build/MultiImage
|
|
|
+ rm -rf [email protected] [email protected]
|
|
|
+
|
|
|
+ dd if=/dev/zero [email protected] bs=32 count=1 conv=sync
|
|
|
+
|
|
|
+ -$(STAGING_DIR_HOST)/bin/mkimage -A $(LINUX_KARCH) -O linux -T multi -C $(1) \
|
|
|
+ -a $(KERNEL_LOADADDR) -e $(KERNEL_ENTRY) -n '$(BOARD_NAME) initramfs' \
|
|
|
+ -d $@:[email protected]:$(KDIR)/image-$(firstword $(DEVICE_DTS)).dtb [email protected]
|
|
|
+ mv [email protected] $@
|
|
|
+ rm -rf [email protected]
|
|
|
+endef
|
|
|
+
|
|
|
define Device/aerohive_hiveap-330
|
|
|
DEVICE_VENDOR := Aerohive
|
|
|
DEVICE_MODEL := HiveAP-330
|
|
|
DEVICE_PACKAGES := kmod-tpm-i2c-atmel
|
|
|
BLOCKSIZE := 128k
|
|
|
- KERNEL := kernel-bin | gzip | uImage gzip
|
|
|
- KERNEL_SIZE := 8m
|
|
|
- KERNEL_INITRAMFS := copy-file $(KDIR)/vmlinux-initramfs | uImage none
|
|
|
- IMAGES := fdt.bin sysupgrade.bin
|
|
|
- IMAGE/fdt.bin := append-dtb
|
|
|
- IMAGE/sysupgrade.bin := append-dtb | pad-to 256k | check-size 256k | \
|
|
|
- append-uImage-fakehdr ramdisk | pad-to 256k | check-size 512k | \
|
|
|
- append-rootfs | pad-rootfs $$(BLOCKSIZE) | pad-to 41216k | check-size 41216k | \
|
|
|
- append-kernel | append-metadata
|
|
|
+ KERNEL := kernel-bin | uImage none
|
|
|
+ KERNEL_INITRAMFS := kernel-bin | MultiImage none
|
|
|
+ KERNEL_SIZE := 16m
|
|
|
+ IMAGES := sysupgrade.bin
|
|
|
+ IMAGE/sysupgrade.bin := append-dtb | pad-to 256k | append-kernel | \
|
|
|
+ append-rootfs | pad-rootfs | check-size | append-metadata
|
|
|
+ IMAGE_SIZE = 63m
|
|
|
+ DEVICE_COMPAT_VERSION := 2.0
|
|
|
+ DEVICE_COMPAT_MESSAGE := \n$\
|
|
|
+ !The partitioning of the HiveAP 330 has changed! \n$\
|
|
|
+ To upgrade, please take a look at the install instructions over \
|
|
|
+ at the device's wiki: <https://openwrt.org/toh/aerohive/hiveap-330> \n$\
|
|
|
+ An abridged version for the console is provided here for comfort. \n$\
|
|
|
+ Run the following script into a shell on the device and retry this \
|
|
|
+ sysupgrade again: \n$\
|
|
|
+ cat <<- "EOF" > /tmp/uboot-fix.sh; sh /tmp/uboot-fix.sh \n$\
|
|
|
+ . /lib/functions.sh \n$\
|
|
|
+ . /lib/functions/system.sh \n$\
|
|
|
+ opkg update && opkg install uboot-envtools kmod-mtd-rw || exit 2 \n$\
|
|
|
+ insmod mtd-rw i_want_a_brick=y || exit 3 \n$\
|
|
|
+ echo "/dev/mtd$$$$(find_mtd_index u-boot-env) 0x0 0x20000 0x10000" > "/etc/fw_env.config" \n$\
|
|
|
+ fw_setenv owrt_boot 'setenv bootargs console=ttyS0,9600;bootm 0xEC040000 - 0xEC000000' \n$\
|
|
|
+ cp "/dev/mtd$$$$(find_mtd_index 'u-boot')" /tmp/uboot \n$\
|
|
|
+ cp /tmp/uboot /tmp/uboot_patched \n$\
|
|
|
+ strings -td < /tmp/uboot | grep '^ *[0-9]* *\\(run owrt_boot\\|setenv bootargs\\).*cp\\.l' | \n$\
|
|
|
+ awk '{print $$$$1}' | \n$\
|
|
|
+ while read offset; do \n$\
|
|
|
+ echo -n "run owrt_boot; " | dd of=/tmp/uboot_patched bs=1 seek=$$$${offset} conv=notrunc \n$\
|
|
|
+ done \n$\
|
|
|
+ mtd write /tmp/uboot_patched u-boot \n$\
|
|
|
+ uci set system.@system[0].compat_version=2.0; uci commit; \n$\
|
|
|
+ EOF \n$\
|
|
|
+ \n$\
|
|
|
+ Note that if this fails, you will need to use the serial console \n$\
|
|
|
+ to re-install OpenWrt. \n$\
|
|
|
+ Note that after this sysupgrade, the AP will be unavailable for 7 \n$\
|
|
|
+ minutes to reformat flash."
|
|
|
+
|
|
|
endef
|
|
|
TARGET_DEVICES += aerohive_hiveap-330
|
|
|
|
|
|
@@ -28,7 +69,7 @@ TARGET_DEVICES += enterasys_ws-ap3710i
|
|
|
define Device/ocedo_panda
|
|
|
DEVICE_VENDOR := OCEDO
|
|
|
DEVICE_MODEL := Panda
|
|
|
- DEVICE_PACKAGES := kmod-rtc-ds1307 uboot-envtools
|
|
|
+ DEVICE_PACKAGES := kmod-rtc-ds1307
|
|
|
KERNEL = kernel-bin | gzip | fit gzip $(KDIR)/image-$$(DEVICE_DTS).dtb
|
|
|
PAGESIZE := 2048
|
|
|
SUBPAGESIZE := 512
|
Martin Kennedy