brcm63xx: Add NuCom R5010UNv2 support

This patch adds support for the NuCom R5010UNv2.

It's a BCM6328 based board. It has an onboard BCM43217 wifi chip. For this
wifi chip looks like the brcmsmac driver isn't still supported, b43 drivers are used
for the profile of the router.

It's worth mentioning this board was affected by a bug solved with
https://dev.openwrt.org/changeset/46707

Tested-by: Angel Fontan <[email protected]>
Signed-off-by: Daniel Gonzalez <[email protected]>
Signed-off-by: Jonas Gorski <[email protected]>

SVN-Revision: 47697

target/linux/brcm63xx/base-files/etc/diag.sh

@@ -102,6 +102,9 @@ set_state() {
 	p870hw-51a_v2)
 		status_led="P870HW-51a:green:power"
 		;;
+	r5010un_v2)
+		status_led="R5010UNv2:green:power"
+		;;
 	rta770bw)
 		status_led="RTA770BW:green:diag"
 		;;

target/linux/brcm63xx/base-files/etc/uci-defaults/01_leds

@@ -46,6 +46,9 @@ homehub2a)
 	ucidef_set_led_usbdev "usb1" "USB1" "HOMEHUB2A:blue:phone" "1-1"
 	ucidef_set_led_usbdev "usb2" "USB2" "HOMEHUB2A:green:phone" "2-1"
 	;;
+r5010un_v2)
+	ucidef_set_led_usbdev "usb" "USB" "R5010UNv2:green:usb" "1-1"
+	;;
 esac
 
 ucidef_commit_leds

target/linux/brcm63xx/base-files/etc/uci-defaults/02_network

@@ -94,6 +94,7 @@ fast2504n |\
 fast2704v2 |\
 hg655b |\
 p870hw-51a_v2 |\
+r5010un_v2 |\
 vr-3025un |\
 vr-3025u |\
 vr-3026e)

target/linux/brcm63xx/base-files/etc/uci-defaults/09_fix_crc

@@ -23,6 +23,7 @@ case "$(brcm63xx_board_name)" in
 	dsl-274xb-f |\
 	magic |\
 	p870hw-51a_v2 |\
+	r5010un_v2 |\
 	rta770bw |\
 	rta770w |\
 	spw303v |\

target/linux/brcm63xx/base-files/lib/brcm63xx.sh

@@ -180,6 +180,9 @@ brcm63xx_dt_detect() {
 	"Netgear DGND3700v1/DGND3800B")
 		board_name="dgnd3700v1_dgnd3800b"
 		;;
+	"NuCom R5010UN v2")
+		board_name="r5010un_v2"
+		;;
 	"Pirelli A226G")
 		board_name="a226g"
 		;;

target/linux/brcm63xx/dts/r5010unv2.dts

@@ -0,0 +1,64 @@
+/dts-v1/;
+
+#include "bcm6328.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "NuCom R5010UN v2";
+	compatible = "nucom,r5010unv2", "brcm,bcm6328";
+	
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <20>;
+		debounce-interval = <60>;
+
+		reset {
+			label = "reset";
+			gpios = <&gpio0 23 1>;
+			linux,code = <KEY_RESTART>;
+		};
+		wps {
+			label = "wps";
+			gpios = <&gpio0 24 1>;
+			linux,code = <KEY_WPS_BUTTON>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		inet_green {
+			label = "R5010UNv2:green:inet";
+			gpios = <&gpio0 1 1>;
+		};
+		inet_fail_red {
+			label = "R5010UNv2:red:inet-fail";
+			gpios = <&gpio0 2 1>;
+		};
+		dsl_red {
+			label = "R5010UNv2:green:dsl";
+			gpios = <&gpio0 3 1>;
+		};
+		power_green {
+			label = "R5010UNv2:green:power";
+			gpios = <&gpio0 4 1>;
+			default-state = "on";
+		};
+		power_fail_red {
+			label = "R5010UNv2:red:power-fail";
+			gpios = <&gpio0 5 1>;
+		};
+		wps_green {
+			label = "R5010UNv2:green:wps";
+			gpios = <&gpio0 10 1>;
+		};
+		usb_green {
+			label = "R5010UNv2:green:usb";
+			gpios = <&gpio0 11 1>;
+		};
+	};
+};
+

target/linux/brcm63xx/image/Makefile

@@ -590,6 +590,8 @@ $(eval $(call bcm63xxCfeRamdisk,DG834GV4,DG834GTv4,dg834g_v4,96348W3,6348))
 $(eval $(call bcm63xxCfeNetgear,DGND3700v1_3800B,DGND3700v1,dgnd3700v1,96368MVWG,6368,--image-offset 0x20000 --block-size 0x20000,U12L144T01_NETGEAR_NEWLED,1))
 # Netgear DGND3800B
 $(eval $(call bcm63xxCfeNetgear,DGND3700v1_3800B,DGND3800B,dgnd3700v1,96368MVWG,6368,--image-offset 0x20000 --block-size 0x20000,U12L144T11_NETGEAR_NEWLED,1))
+# NuCom R5010UNv2
+$(eval $(call bcm63xxCfe,R5010UNV2,R5010UNv2,r5010unv2,96328ang,6328,--pad 8))
 # Pirelli Alice Gate VoIP 2 Plus Wi-Fi AGPF-S0
 $(eval $(call bcm63xxCfe,AGPF_S0,AGV2+W,agpf-s0,AGPF-S0,6358,--block-size 0x20000 --image-offset 0x20000 --signature2 IMAGE --tag-version 8))
 # Pirelli A226G

target/linux/brcm63xx/patches-4.1/573-board_R5010UNv2.patch

@@ -0,0 +1,70 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -641,6 +641,51 @@
+ 		},
+ 	},
+ };
++
++static struct board_info __initdata board_R5010UNV2 = {
++	.name					= "96328ang",
++	.expected_cpu_id			= 0x6328,
++
++	.has_uart0				= 1,
++	.has_pci				= 1,
++	.use_fallback_sprom			= 1,
++	.has_ohci0				= 1,
++	.has_ehci0				= 1,
++	.num_usbh_ports				= 1,
++	.has_enetsw				= 1,
++
++	.enetsw = {
++		.used_ports = {
++			[0] = {
++				.used		= 1,
++				.phy_id		= 1,
++				.name		= "Port 1",
++			},
++			[1] = {
++				.used		= 1,
++				.phy_id		= 2,
++				.name		= "Port 2",
++			},
++			[2] = {
++				.used		= 1,
++				.phy_id		= 3,
++				.name		= "Port 3",
++			},
++			[3] = {
++				.used		= 1,
++				.phy_id		= 4,
++				.name		= "Port 4",
++			},
++		},
++	},
++
++	.fallback_sprom = {
++		.type 				= SPROM_BCM43217,
++		.pci_bus			= 1,
++		.pci_dev			= 0,
++	},
++};
++
+ #endif /* CONFIG_BCM63XX_CPU_6328 */
+ 
+ /*
+@@ -2452,6 +2497,7 @@
+ 	&board_A4001N1,
+ 	&board_dsl_274xb_f1,
+ 	&board_FAST2704V2,
++	&board_R5010UNV2,
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6338
+ 	&board_96338gw,
+@@ -2550,6 +2596,7 @@
+ 	{ .compatible = "comtrend,ar-5381u", .data = &board_AR5381u, },
+ 	{ .compatible = "comtrend,ar-5387un", .data = &board_AR5387un, },
+ 	{ .compatible = "d-link,dsl-274xb-f", .data = &board_dsl_274xb_f1, },
++	{ .compatible = "nucom,r5010unv2", .data = &board_R5010UNV2, },
+ 	{ .compatible = "sagem,f@st2704v2", .data = &board_FAST2704V2, },
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6338

target/linux/brcm63xx/profiles/nucom.mk

@@ -0,0 +1,16 @@
+#
+# Copyright (C) 2015 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+define Profile/R5010UNV2
+  NAME:=NuCom R5010UN v2
+  PACKAGES:=kmod-b43 wpad-mini \
+	kmod-usb2 kmod-usb-ohci kmod-ledtrig-usbdev
+endef
+define Profile/R5010UNV2/Description
+  Package set optimized for R5010UNV2.
+endef
+$(eval $(call Profile,R5010UNV2))