refresh kernel patches

SVN-Revision: 11195

target/linux/at91/patches-2.6.21/001-vlink-machine.patch

@@ -1,5 +1,7 @@
---- linux-2.6.21.1.orig/arch/arm/boot/compressed/head-at91rm9200.S	2007-05-28 12:22:29.000000000 +0200
-+++ linux-2.6.21.1/arch/arm/boot/compressed/head-at91rm9200.S	2007-05-28 12:52:16.000000000 +0200
+Index: linux-2.6.21.7/arch/arm/boot/compressed/head-at91rm9200.S
+===================================================================
+--- linux-2.6.21.7.orig/arch/arm/boot/compressed/head-at91rm9200.S
++++ linux-2.6.21.7/arch/arm/boot/compressed/head-at91rm9200.S
 @@ -61,6 +61,12 @@
  		cmp	r7, r3
  		beq	99f
@@ -13,8 +15,10 @@
  		@ Ajeco 1ARM : 1075
  		mov	r3,	#(MACH_TYPE_ONEARM & 0xff)
  		orr	r3, r3, #(MACH_TYPE_ONEARM & 0xff00)
---- linux-2.6.21.1.orig/arch/arm/mach-at91/board-vlink.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.21.1/arch/arm/mach-at91/board-vlink.c	2007-05-28 13:09:54.000000000 +0200
+Index: linux-2.6.21.7/arch/arm/mach-at91/board-vlink.c
+===================================================================
+--- /dev/null
++++ linux-2.6.21.7/arch/arm/mach-at91/board-vlink.c
 @@ -0,0 +1,160 @@
 +/*
 + * linux/arch/arm/mach-at91/board-vlink.c
@@ -176,9 +180,11 @@
 +	.init_irq	= vlink_init_irq,
 +	.init_machine	= vlink_board_init,
 +MACHINE_END
---- linux-2.6.21.1.orig/arch/arm/mach-at91/Kconfig	2007-05-28 12:22:29.000000000 +0200
-+++ linux-2.6.21.1/arch/arm/mach-at91/Kconfig	2007-05-28 13:11:45.000000000 +0200
-@@ -96,6 +96,12 @@
+Index: linux-2.6.21.7/arch/arm/mach-at91/Kconfig
+===================================================================
+--- linux-2.6.21.7.orig/arch/arm/mach-at91/Kconfig
++++ linux-2.6.21.7/arch/arm/mach-at91/Kconfig
+@@ -96,6 +96,12 @@ config MACH_CHUB
  	help
  	  Select this if you are using Promwad's Chub board.
  
@@ -191,9 +197,11 @@
  endif
  
  # ----------------------------------------------------------
---- linux-2.6.21.1.orig/arch/arm/mach-at91/Makefile	2007-05-28 12:22:29.000000000 +0200
-+++ linux-2.6.21.1/arch/arm/mach-at91/Makefile	2007-05-28 13:13:15.000000000 +0200
-@@ -29,6 +29,7 @@
+Index: linux-2.6.21.7/arch/arm/mach-at91/Makefile
+===================================================================
+--- linux-2.6.21.7.orig/arch/arm/mach-at91/Makefile
++++ linux-2.6.21.7/arch/arm/mach-at91/Makefile
+@@ -29,6 +29,7 @@ obj-$(CONFIG_MACH_KB9200)	+= board-kb920
  obj-$(CONFIG_MACH_ATEB9200)	+= board-eb9200.o
  obj-$(CONFIG_MACH_KAFA)		+= board-kafa.o
  obj-$(CONFIG_MACH_CHUB)		+= board-chub.o
@@ -201,7 +209,7 @@
  
  # AT91SAM9260 board-specific support
  obj-$(CONFIG_MACH_AT91SAM9260EK) += board-sam9260ek.o
-@@ -51,6 +52,7 @@
+@@ -51,6 +52,7 @@ led-$(CONFIG_MACH_CSB337)	+= leds.o
  led-$(CONFIG_MACH_CSB637)	+= leds.o
  led-$(CONFIG_MACH_KB9200)	+= leds.o
  led-$(CONFIG_MACH_KAFA)		+= leds.o

target/linux/at91/patches-2.6.21/002-led-driver.patch

@@ -1,7 +1,8 @@
-diff -urN linux-2.6.21.1.orig/arch/arm/mach-at91/board-vlink.c linux-2.6.21.1/arch/arm/mach-at91/board-vlink.c
---- linux-2.6.21.1.orig/arch/arm/mach-at91/board-vlink.c	2007-05-28 13:33:41.000000000 +0200
-+++ linux-2.6.21.1/arch/arm/mach-at91/board-vlink.c	2007-05-28 14:43:28.000000000 +0200
-@@ -61,7 +61,7 @@
+Index: linux-2.6.21.7/arch/arm/mach-at91/board-vlink.c
+===================================================================
+--- linux-2.6.21.7.orig/arch/arm/mach-at91/board-vlink.c
++++ linux-2.6.21.7/arch/arm/mach-at91/board-vlink.c
+@@ -61,7 +61,7 @@ static void __init vlink_map_io(void)
  	at91rm9200_initialize(18432000, AT91RM9200_PQFP);
  
  	/* Setup the LEDs */
@@ -10,7 +11,7 @@ diff -urN linux-2.6.21.1.orig/arch/arm/mach-at91/board-vlink.c linux-2.6.21.1/ar
  
  	/* Setup the serial ports and console */
  	at91_init_serial(&vlink_uart_config);
-@@ -81,10 +81,12 @@
+@@ -81,10 +81,12 @@ static struct at91_usbh_data __initdata 
  	.ports		= 1,
  };
  
@@ -23,7 +24,7 @@ diff -urN linux-2.6.21.1.orig/arch/arm/mach-at91/board-vlink.c linux-2.6.21.1/ar
  
  static struct at91_mmc_data __initdata vlink_mmc_data = {
  //	.det_pin	= AT91_PIN_PB27,
-@@ -108,18 +110,19 @@
+@@ -108,18 +110,19 @@ static struct spi_board_info vlink_spi_d
  #endif
  };
  
@@ -46,7 +47,7 @@ diff -urN linux-2.6.21.1.orig/arch/arm/mach-at91/board-vlink.c linux-2.6.21.1/ar
  
  static void __init vlink_board_init(void)
  {
-@@ -130,8 +133,8 @@
+@@ -130,8 +133,8 @@ static void __init vlink_board_init(void
  	/* USB Host */
  	at91_add_device_usbh(&vlink_usbh_data);
  	/* USB Device */
@@ -57,7 +58,7 @@ diff -urN linux-2.6.21.1.orig/arch/arm/mach-at91/board-vlink.c linux-2.6.21.1/ar
  	/* I2C */
  	at91_add_device_i2c();
  	/* SPI */
-@@ -145,7 +148,7 @@
+@@ -145,7 +148,7 @@ static void __init vlink_board_init(void
  	at91_add_device_mmc(0, &vlink_mmc_data);
  #endif
  	/* LEDs */
@@ -66,10 +67,11 @@ diff -urN linux-2.6.21.1.orig/arch/arm/mach-at91/board-vlink.c linux-2.6.21.1/ar
  }
  
  MACHINE_START(VLINK, "FDL VersaLink")
-diff -urN linux-2.6.21.1.orig/arch/arm/mach-at91/Makefile linux-2.6.21.1/arch/arm/mach-at91/Makefile
---- linux-2.6.21.1.orig/arch/arm/mach-at91/Makefile	2007-05-28 13:13:15.000000000 +0200
-+++ linux-2.6.21.1/arch/arm/mach-at91/Makefile	2007-05-28 14:19:06.000000000 +0200
-@@ -52,7 +52,7 @@
+Index: linux-2.6.21.7/arch/arm/mach-at91/Makefile
+===================================================================
+--- linux-2.6.21.7.orig/arch/arm/mach-at91/Makefile
++++ linux-2.6.21.7/arch/arm/mach-at91/Makefile
+@@ -52,7 +52,7 @@ led-$(CONFIG_MACH_CSB337)	+= leds.o
  led-$(CONFIG_MACH_CSB637)	+= leds.o
  led-$(CONFIG_MACH_KB9200)	+= leds.o
  led-$(CONFIG_MACH_KAFA)		+= leds.o
@@ -78,9 +80,10 @@ diff -urN linux-2.6.21.1.orig/arch/arm/mach-at91/Makefile linux-2.6.21.1/arch/ar
  obj-$(CONFIG_LEDS) += $(led-y)
  
  # VGA support
-diff -urN linux-2.6.21.1.orig/arch/arm/mach-at91/vlink_leds.c linux-2.6.21.1/arch/arm/mach-at91/vlink_leds.c
---- linux-2.6.21.1.orig/arch/arm/mach-at91/vlink_leds.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.21.1/arch/arm/mach-at91/vlink_leds.c	2007-05-28 14:41:03.000000000 +0200
+Index: linux-2.6.21.7/arch/arm/mach-at91/vlink_leds.c
+===================================================================
+--- /dev/null
++++ linux-2.6.21.7/arch/arm/mach-at91/vlink_leds.c
 @@ -0,0 +1,105 @@
 +/*
 + * LED driver for Atmel AT91-based boards.

target/linux/at91/patches-2.6.21/003-gpio-driver.patch

@@ -1,5 +1,7 @@
---- linux-2.6.21.1.orig/arch/arm/mach-at91/gpio.c	2007-04-27 23:49:26.000000000 +0200
-+++ linux-2.6.21.1/arch/arm/mach-at91/gpio.c	2007-05-28 15:30:48.000000000 +0200
+Index: linux-2.6.21.7/arch/arm/mach-at91/gpio.c
+===================================================================
+--- linux-2.6.21.7.orig/arch/arm/mach-at91/gpio.c
++++ linux-2.6.21.7/arch/arm/mach-at91/gpio.c
 @@ -27,6 +27,7 @@
  
  static struct at91_gpio_bank *gpio;
@@ -8,7 +10,7 @@
  
  
  static inline void __iomem *pin_to_controller(unsigned pin)
-@@ -71,9 +72,13 @@
+@@ -71,9 +72,13 @@ int __init_or_module at91_set_GPIO_perip
  {
  	void __iomem	*pio = pin_to_controller(pin);
  	unsigned	mask = pin_to_mask(pin);
@@ -22,7 +24,7 @@
  	__raw_writel(mask, pio + PIO_IDR);
  	__raw_writel(mask, pio + (use_pullup ? PIO_PUER : PIO_PUDR));
  	__raw_writel(mask, pio + PIO_PER);
-@@ -130,10 +135,13 @@
+@@ -130,10 +135,13 @@ int __init_or_module at91_set_gpio_input
  {
  	void __iomem	*pio = pin_to_controller(pin);
  	unsigned	mask = pin_to_mask(pin);
@@ -36,7 +38,7 @@
  	__raw_writel(mask, pio + PIO_IDR);
  	__raw_writel(mask, pio + (use_pullup ? PIO_PUER : PIO_PUDR));
  	__raw_writel(mask, pio + PIO_ODR);
-@@ -151,10 +159,13 @@
+@@ -151,10 +159,13 @@ int __init_or_module at91_set_gpio_outpu
  {
  	void __iomem	*pio = pin_to_controller(pin);
  	unsigned	mask = pin_to_mask(pin);
@@ -50,7 +52,7 @@
  	__raw_writel(mask, pio + PIO_IDR);
  	__raw_writel(mask, pio + PIO_PUDR);
  	__raw_writel(mask, pio + (value ? PIO_SODR : PIO_CODR));
-@@ -262,6 +273,18 @@
+@@ -262,6 +273,18 @@ int at91_get_gpio_value(unsigned pin)
  }
  EXPORT_SYMBOL(at91_get_gpio_value);
  
@@ -69,9 +71,11 @@
  /*--------------------------------------------------------------------------*/
  
  #ifdef CONFIG_PM
---- linux-2.6.21.1.orig/drivers/char/Kconfig	2007-05-28 12:22:29.000000000 +0200
-+++ linux-2.6.21.1/drivers/char/Kconfig	2007-05-28 15:37:43.000000000 +0200
-@@ -1087,5 +1087,12 @@
+Index: linux-2.6.21.7/drivers/char/Kconfig
+===================================================================
+--- linux-2.6.21.7.orig/drivers/char/Kconfig
++++ linux-2.6.21.7/drivers/char/Kconfig
+@@ -1087,5 +1087,12 @@ config AT91_SPIDEV
  	  The SPI driver gives user mode access to this serial
  	  bus on the AT91RM9200 processor.
  
@@ -84,9 +88,11 @@
 +
  endmenu
  
---- linux-2.6.21.1.orig/drivers/char/Makefile	2007-05-28 12:22:29.000000000 +0200
-+++ linux-2.6.21.1/drivers/char/Makefile	2007-05-28 15:38:11.000000000 +0200
-@@ -95,6 +95,7 @@
+Index: linux-2.6.21.7/drivers/char/Makefile
+===================================================================
+--- linux-2.6.21.7.orig/drivers/char/Makefile
++++ linux-2.6.21.7/drivers/char/Makefile
+@@ -95,6 +95,7 @@ obj-$(CONFIG_TANBAC_TB0219)	+= tb0219.o
  obj-$(CONFIG_TELCLOCK)		+= tlclk.o
  obj-$(CONFIG_AT91_SPI)		+= at91_spi.o
  obj-$(CONFIG_AT91_SPIDEV)	+= at91_spidev.o
@@ -94,8 +100,10 @@
  
  obj-$(CONFIG_WATCHDOG)		+= watchdog/
  obj-$(CONFIG_MWAVE)		+= mwave/
---- linux-2.6.21.1.orig/drivers/char/vlink_giu.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.21.1/drivers/char/vlink_giu.c	2007-05-28 15:39:47.000000000 +0200
+Index: linux-2.6.21.7/drivers/char/vlink_giu.c
+===================================================================
+--- /dev/null
++++ linux-2.6.21.7/drivers/char/vlink_giu.c
 @@ -0,0 +1,256 @@
 +/*
 + *  Driver for FDL Versalink GPIO

target/linux/at91/patches-2.6.21/006-change-gpios.patch

@@ -1,6 +1,8 @@
---- linux-2.6.21.1.orig/arch/arm/mach-at91/board-vlink.c	2007-05-28 15:53:31.000000000 +0200
-+++ linux-2.6.21.1/arch/arm/mach-at91/board-vlink.c	2007-05-28 15:58:46.000000000 +0200
-@@ -149,6 +149,33 @@
+Index: linux-2.6.21.7/arch/arm/mach-at91/board-vlink.c
+===================================================================
+--- linux-2.6.21.7.orig/arch/arm/mach-at91/board-vlink.c
++++ linux-2.6.21.7/arch/arm/mach-at91/board-vlink.c
+@@ -149,6 +149,33 @@ static void __init vlink_board_init(void
  #endif
  	/* LEDs */
  //	at91_gpio_leds(vlink_leds, ARRAY_SIZE(vlink_leds));

target/linux/at91/patches-2.6.21/007-mtd-partition.patch

@@ -1,6 +1,8 @@
---- linux-2.6.21.1.orig/drivers/mtd/devices/at91_dataflash.c	2007-05-28 12:22:29.000000000 +0200
-+++ linux-2.6.21.1/drivers/mtd/devices/at91_dataflash.c	2007-05-28 16:10:21.000000000 +0200
-@@ -173,7 +173,7 @@
+Index: linux-2.6.21.7/drivers/mtd/devices/at91_dataflash.c
+===================================================================
+--- linux-2.6.21.7.orig/drivers/mtd/devices/at91_dataflash.c
++++ linux-2.6.21.7/drivers/mtd/devices/at91_dataflash.c
+@@ -173,7 +173,7 @@ static struct mtd_partition static_parti
  };
  #endif
  
@@ -9,9 +11,11 @@
  
  #endif
  
---- linux-2.6.21.1.orig/drivers/mtd/Kconfig	2007-05-28 12:22:09.000000000 +0200
-+++ linux-2.6.21.1/drivers/mtd/Kconfig	2007-05-28 16:09:16.000000000 +0200
-@@ -157,6 +157,12 @@
+Index: linux-2.6.21.7/drivers/mtd/Kconfig
+===================================================================
+--- linux-2.6.21.7.orig/drivers/mtd/Kconfig
++++ linux-2.6.21.7/drivers/mtd/Kconfig
+@@ -162,6 +162,12 @@ config MTD_AFS_PARTS
  	  for your particular device. It won't happen automatically. The
  	  'armflash' map driver (CONFIG_MTD_ARMFLASH) does this, for example.
  
@@ -24,9 +28,11 @@
  comment "User Modules And Translation Layers"
  	depends on MTD
  
---- linux-2.6.21.1.orig/drivers/mtd/Makefile	2007-04-27 23:49:26.000000000 +0200
-+++ linux-2.6.21.1/drivers/mtd/Makefile	2007-05-28 16:09:55.000000000 +0200
-@@ -12,6 +12,7 @@
+Index: linux-2.6.21.7/drivers/mtd/Makefile
+===================================================================
+--- linux-2.6.21.7.orig/drivers/mtd/Makefile
++++ linux-2.6.21.7/drivers/mtd/Makefile
+@@ -12,6 +12,7 @@ obj-$(CONFIG_MTD_CONCAT)	+= mtdconcat.o
  obj-$(CONFIG_MTD_REDBOOT_PARTS) += redboot.o
  obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdlinepart.o
  obj-$(CONFIG_MTD_AFS_PARTS)	+= afs.o

target/linux/at91/patches-2.6.21/008-fdl-serial.patch

@@ -1,6 +1,8 @@
---- linux-2.6.21.1.orig/drivers/serial/atmel_serial.c	2007-05-28 12:22:29.000000000 +0200
-+++ linux-2.6.21.1/drivers/serial/atmel_serial.c	2007-05-28 16:39:09.000000000 +0200
-@@ -174,7 +174,35 @@
+Index: linux-2.6.21.7/drivers/serial/atmel_serial.c
+===================================================================
+--- linux-2.6.21.7.orig/drivers/serial/atmel_serial.c
++++ linux-2.6.21.7/drivers/serial/atmel_serial.c
+@@ -174,7 +174,35 @@ static void atmel_set_mctrl(struct uart_
  				at91_set_gpio_value(AT91_PIN_PA21, 0);
  			else
  				at91_set_gpio_value(AT91_PIN_PA21, 1);
@@ -36,7 +38,7 @@
  	}
  #endif
  
-@@ -211,8 +239,10 @@
+@@ -211,8 +239,10 @@ static u_int atmel_get_mctrl(struct uart
  	/*
  	 * The control signals are active low.
  	 */
@@ -49,7 +51,7 @@
  	if (!(status & ATMEL_US_CTS))
  		ret |= TIOCM_CTS;
  	if (!(status & ATMEL_US_DSR))
-@@ -220,6 +250,16 @@
+@@ -220,6 +250,16 @@ static u_int atmel_get_mctrl(struct uart
  	if (!(status & ATMEL_US_RI))
  		ret |= TIOCM_RI;
  
@@ -66,7 +68,7 @@
  	return ret;
  }
  
-@@ -511,6 +551,34 @@
+@@ -511,6 +551,34 @@ static void atmel_tx_chars(struct uart_p
  }
  
  /*
@@ -101,7 +103,7 @@
   * Interrupt handler
   */
  static irqreturn_t atmel_interrupt(int irq, void *dev_id)
-@@ -587,6 +655,23 @@
+@@ -587,6 +655,23 @@ static int atmel_startup(struct uart_por
  		return retval;
  	}
  
@@ -125,7 +127,7 @@
  	/*
  	 * Initialize DMA (if necessary)
  	 */
-@@ -603,6 +688,10 @@
+@@ -603,6 +688,10 @@ static int atmel_startup(struct uart_por
  					kfree(atmel_port->pdc_rx[0].buf);
  				}
  				free_irq(port->irq, port);
@@ -136,7 +138,7 @@
  				return -ENOMEM;
  			}
  			pdc->dma_addr = dma_map_single(port->dev, pdc->buf, PDC_BUFFER_SIZE, DMA_FROM_DEVICE);
-@@ -636,6 +725,10 @@
+@@ -636,6 +725,10 @@ static int atmel_startup(struct uart_por
  		retval = atmel_open_hook(port);
  		if (retval) {
  			free_irq(port->irq, port);
@@ -147,7 +149,7 @@
  			return retval;
  		}
  	}
-@@ -701,6 +794,10 @@
+@@ -701,6 +794,10 @@ static void atmel_shutdown(struct uart_p
  	 * Free the interrupt
  	 */
  	free_irq(port->irq, port);

target/linux/at91/patches-2.6.21/009-fdl-uartinit.patch

@@ -1,6 +1,8 @@
---- linux-2.6.21.1.orig/arch/arm/mach-at91/at91rm9200_devices.c	2007-05-28 12:22:29.000000000 +0200
-+++ linux-2.6.21.1/arch/arm/mach-at91/at91rm9200_devices.c	2007-05-28 16:44:36.000000000 +0200
-@@ -618,7 +618,6 @@
+Index: linux-2.6.21.7/arch/arm/mach-at91/at91rm9200_devices.c
+===================================================================
+--- linux-2.6.21.7.orig/arch/arm/mach-at91/at91rm9200_devices.c
++++ linux-2.6.21.7/arch/arm/mach-at91/at91rm9200_devices.c
+@@ -618,7 +618,6 @@ void __init at91_init_leds(u8 cpu_led, u
  
  
  #if defined(CONFIG_NEW_LEDS)
@@ -8,7 +10,7 @@
  static struct platform_device at91_leds = {
  	.name		= "at91_leds",
  	.id		= -1,
-@@ -724,6 +723,10 @@
+@@ -724,6 +723,10 @@ static inline void configure_usart0_pins
  	 *  We need to drive the pin manually.  Default is off (RTS is active low).
  	 */
  	at91_set_gpio_output(AT91_PIN_PA21, 1);
@@ -19,7 +21,7 @@
  }
  
  static struct resource uart1_resources[] = {
-@@ -835,6 +838,12 @@
+@@ -835,6 +838,12 @@ static inline void configure_usart3_pins
  {
  	at91_set_B_periph(AT91_PIN_PA5, 1);		/* TXD3 */
  	at91_set_B_periph(AT91_PIN_PA6, 0);		/* RXD3 */

target/linux/at91/patches-2.6.21/010-dm9161a-phyfix.patch

@@ -1,6 +1,8 @@
---- linux-2.6.21.1/drivers/net/arm/at91_ether.c.old	2007-06-04 18:15:49.000000000 +0200
-+++ linux-2.6.21.1/drivers/net/arm/at91_ether.c	2007-06-04 18:10:36.000000000 +0200
-@@ -146,6 +146,7 @@
+Index: linux-2.6.21.7/drivers/net/arm/at91_ether.c
+===================================================================
+--- linux-2.6.21.7.orig/drivers/net/arm/at91_ether.c
++++ linux-2.6.21.7/drivers/net/arm/at91_ether.c
+@@ -146,6 +146,7 @@ static void update_linkspeed(struct net_
  	struct at91_private *lp = netdev_priv(dev);
  	unsigned int bmsr, bmcr, lpa, mac_cfg;
  	unsigned int speed, duplex;
@@ -8,7 +10,7 @@
  
  	if (!mii_link_ok(&lp->mii)) {		/* no link */
  		netif_carrier_off(dev);
-@@ -158,8 +159,15 @@
+@@ -158,8 +159,15 @@ static void update_linkspeed(struct net_
  	read_phy(lp->phy_address, MII_BMSR, &bmsr);
  	read_phy(lp->phy_address, MII_BMCR, &bmcr);
  	if (bmcr & BMCR_ANENABLE) {				/* AutoNegotiation is enabled */

target/linux/at91/patches-2.6.21/011-vlink-resetfix.patch

@@ -1,6 +1,8 @@
---- linux-2.6.21.1.old/arch/arm/mach-at91/board-vlink.c	2007-06-04 15:45:19.000000000 +0200
-+++ linux-2.6.21.1/arch/arm/mach-at91/board-vlink.c	2007-06-05 05:27:19.000000000 +0200
-@@ -175,6 +175,7 @@
+Index: linux-2.6.21.7/arch/arm/mach-at91/board-vlink.c
+===================================================================
+--- linux-2.6.21.7.orig/arch/arm/mach-at91/board-vlink.c
++++ linux-2.6.21.7/arch/arm/mach-at91/board-vlink.c
+@@ -175,6 +175,7 @@ static void __init vlink_board_init(void
  /* USB Device control */
         at91_set_gpio_input(AT91_PIN_PB27, 1);  // UDB_CNX
         at91_set_gpio_output(AT91_PIN_PB28, 1); // UDB_PUP

target/linux/at91/patches-2.6.21/012-at91-mmcfix.patch

@@ -1,5 +1,7 @@
---- linux-2.6.21.1.old/drivers/mmc/at91_mci.c	2007-06-05 09:08:57.000000000 +0200
-+++ linux-2.6.21.1/drivers/mmc/at91_mci.c	2007-06-05 10:59:11.000000000 +0200
+Index: linux-2.6.21.7/drivers/mmc/at91_mci.c
+===================================================================
+--- linux-2.6.21.7.orig/drivers/mmc/at91_mci.c
++++ linux-2.6.21.7/drivers/mmc/at91_mci.c
 @@ -79,7 +79,8 @@
  
  #define DRIVER_NAME "at91_mci"
@@ -10,7 +12,7 @@
  
  #define FL_SENT_COMMAND	(1 << 0)
  #define FL_SENT_STOP	(1 << 1)
-@@ -132,7 +133,7 @@
+@@ -132,7 +133,7 @@ struct at91mci_host
  /*
   * Copy from sg to a dma block - used for transfers
   */
@@ -19,7 +21,7 @@
  {
  	unsigned int len, i, size;
  	unsigned *dmabuf = host->buffer;
-@@ -181,7 +182,7 @@
+@@ -181,7 +182,7 @@ static inline void at91mci_sg_to_dma(str
  /*
   * Prepare a dma read
   */
@@ -28,7 +30,7 @@
  {
  	int i;
  	struct scatterlist *sg;
-@@ -249,23 +250,24 @@
+@@ -249,23 +250,24 @@ static void at91mci_pre_dma_read(struct 
  /*
   * Handle after a dma read
   */
@@ -56,7 +58,7 @@
  	}
  
  	while (host->in_use_index < host->transfer_index) {
-@@ -300,39 +302,14 @@
+@@ -300,39 +302,14 @@ static void at91mci_post_dma_read(struct
  
  	/* Is there another transfer to trigger? */
  	if (host->transfer_index < data->sg_len)
@@ -99,7 +101,7 @@
  }
  
  /*
-@@ -340,10 +317,17 @@
+@@ -340,10 +317,17 @@ static void at91_mci_handle_transmitted(
   */
  static void at91_mci_enable(struct at91mci_host *host)
  {
@@ -118,7 +120,7 @@
  
  	/* use Slot A or B (only one at same time) */
  	at91_mci_write(host, AT91_MCI_SDCR, host->board->slot_b);
-@@ -359,9 +343,8 @@
+@@ -359,9 +343,8 @@ static void at91_mci_disable(struct at91
  
  /*
   * Send a command
@@ -129,7 +131,7 @@
  {
  	unsigned int cmdr, mr;
  	unsigned int block_length;
-@@ -372,8 +355,7 @@
+@@ -372,8 +355,7 @@ static unsigned int at91_mci_send_comman
  
  	host->cmd = cmd;
  
@@ -139,7 +141,7 @@
  	if ((at91_mci_read(host, AT91_MCI_SR) & AT91_MCI_RTOE) && (cmd->opcode == 1)) {
  		pr_debug("Clearing timeout\n");
  		at91_mci_write(host, AT91_MCI_ARGR, 0);
-@@ -383,7 +365,7 @@
+@@ -383,7 +365,7 @@ static unsigned int at91_mci_send_comman
  			pr_debug("Clearing: SR = %08X\n", at91_mci_read(host, AT91_MCI_SR));
  		}
  	}
@@ -148,7 +150,7 @@
  	cmdr = cmd->opcode;
  
  	if (mmc_resp_type(cmd) == MMC_RSP_NONE)
-@@ -440,50 +422,48 @@
+@@ -440,50 +422,48 @@ static unsigned int at91_mci_send_comman
  		at91_mci_write(host, ATMEL_PDC_TCR, 0);
  		at91_mci_write(host, ATMEL_PDC_TNPR, 0);
  		at91_mci_write(host, ATMEL_PDC_TNCR, 0);
@@ -239,7 +241,7 @@
  		}
  	}
  
-@@ -498,39 +478,24 @@
+@@ -498,39 +478,24 @@ static unsigned int at91_mci_send_comman
  	if (cmdr & AT91_MCI_TRCMD_START) {
  		if (cmdr & AT91_MCI_TRDIR)
  			at91_mci_write(host, ATMEL_PDC_PTCR, ATMEL_PDC_RXTEN);
@@ -283,7 +285,7 @@
  	}
  	else
  		mmc_request_done(host->mmc, host->request);
-@@ -539,7 +504,7 @@
+@@ -539,7 +504,7 @@ static void at91mci_process_next(struct 
  /*
   * Handle a command that has been completed
   */
@@ -292,7 +294,7 @@
  {
  	struct mmc_command *cmd = host->cmd;
  	unsigned int status;
-@@ -583,7 +548,7 @@
+@@ -583,7 +548,7 @@ static void at91mci_completed_command(st
  	else
  		cmd->error = MMC_ERR_NONE;
  
@@ -301,7 +303,7 @@
  }
  
  /*
-@@ -595,7 +560,60 @@
+@@ -595,7 +560,60 @@ static void at91_mci_request(struct mmc_
  	host->request = mrq;
  	host->flags = 0;
  
@@ -363,7 +365,7 @@
  }
  
  /*
-@@ -698,29 +716,33 @@
+@@ -698,29 +716,33 @@ static irqreturn_t at91_mci_irq(int irq,
  			at91_mci_handle_transmitted(host);
  		}
  
@@ -405,7 +407,7 @@
  
  		if (int_status & AT91_MCI_TXRDY)
  			pr_debug("Ready to transmit\n");
-@@ -730,14 +752,14 @@
+@@ -730,14 +752,14 @@ static irqreturn_t at91_mci_irq(int irq,
  
  		if (int_status & AT91_MCI_CMDRDY) {
  			pr_debug("Command ready\n");

target/linux/at91/patches-2.6.21/013-at91-mmc1wire.patch

@@ -1,5 +1,7 @@
---- linux-2.6.21.1.old/drivers/mmc/at91_mci.c	2007-06-05 11:08:39.000000000 +0200
-+++ linux-2.6.21.1/drivers/mmc/at91_mci.c	2007-06-05 11:28:40.000000000 +0200
+Index: linux-2.6.21.7/drivers/mmc/at91_mci.c
+===================================================================
+--- linux-2.6.21.7.orig/drivers/mmc/at91_mci.c
++++ linux-2.6.21.7/drivers/mmc/at91_mci.c
 @@ -79,8 +79,7 @@
  
  #define DRIVER_NAME "at91_mci"

target/linux/at91/patches-2.6.21/014-initpartition.patch

@@ -1,6 +1,8 @@
---- linux-2.6.21.5.old/drivers/mtd/devices/at91_dataflash.c	2007-06-13 13:31:24.000000000 +0200
-+++ linux-2.6.21.5/drivers/mtd/devices/at91_dataflash.c	2007-06-19 12:49:48.000000000 +0200
-@@ -161,12 +161,12 @@
+Index: linux-2.6.21.7/drivers/mtd/devices/at91_dataflash.c
+===================================================================
+--- linux-2.6.21.7.orig/drivers/mtd/devices/at91_dataflash.c
++++ linux-2.6.21.7/drivers/mtd/devices/at91_dataflash.c
+@@ -161,12 +161,12 @@ static struct mtd_partition static_parti
  		.mask_flags	= MTD_WRITEABLE,	/* read-only */
  	},
  	{

target/linux/at91/patches-2.6.21/015-simenable.patch

@@ -1,16 +1,38 @@
-diff -urN linux-2.6.21.5.old/arch/arm/mach-at91/board-vlink.c linux-2.6.21.5/arch/arm/mach-at91/board-vlink.c
---- linux-2.6.21.5.old/arch/arm/mach-at91/board-vlink.c	2007-07-26 12:43:11.000000000 +0200
-+++ linux-2.6.21.5/arch/arm/mach-at91/board-vlink.c	2007-08-20 16:56:56.000000000 +0200
-@@ -151,31 +151,37 @@
+Index: linux-2.6.21.7/arch/arm/mach-at91/board-vlink.c
+===================================================================
+--- linux-2.6.21.7.orig/arch/arm/mach-at91/board-vlink.c
++++ linux-2.6.21.7/arch/arm/mach-at91/board-vlink.c
+@@ -150,32 +150,38 @@ static void __init vlink_board_init(void
+ 	/* LEDs */
  //	at91_gpio_leds(vlink_leds, ARRAY_SIZE(vlink_leds));
  
- /* Other LED's */
+-/* Other LED's */
 -       at91_set_gpio_output(AT91_PIN_PC7, 1);  // LED FRONT AP1
 -       at91_set_gpio_output(AT91_PIN_PC8, 1);  // LED FRONT BP1
 -       at91_set_gpio_output(AT91_PIN_PB14, 1); // LED BACK AP1
 -       at91_set_gpio_output(AT91_PIN_PB15, 1); // LED BACK BP1
 -       at91_set_gpio_output(AT91_PIN_PB16, 1); // LED BACK AP2
 -       at91_set_gpio_output(AT91_PIN_PB17, 1); // LED BACK BP2
+-
+-/* SIM Cards */
+-       at91_set_gpio_output(AT91_PIN_PB9, 1);  // ENBSC3
+-       at91_set_gpio_output(AT91_PIN_PB10, 1); // ENBSC2
+-       at91_set_gpio_output(AT91_PIN_PB11, 1); // ENBSC1
+-
+-/* GSM Module Control */
+-       at91_set_gpio_output(AT91_PIN_PB12, 1); // GSMONOFF
+-
+-/* Test jig presence detection */
+-       at91_set_gpio_input(AT91_PIN_PB8, 1);   // JIGPRESENT
+-
+-/* Power indicator */
+-       at91_set_gpio_input(AT91_PIN_PB22, 1);  // PWR_IND
+-
+-/* USB Device control */
+-       at91_set_gpio_input(AT91_PIN_PB27, 1);  // UDB_CNX
+-       at91_set_gpio_output(AT91_PIN_PB28, 1); // UDB_PUP
+-			 at91_set_multi_drive(AT91_PIN_PB28, 1); // Set to multi-drive
++	/* Other LED's */
 +	at91_set_gpio_output(AT91_PIN_PC7, 1);  // LED FRONT AP1
 +	at91_set_gpio_output(AT91_PIN_PC8, 1);  // LED FRONT BP1
 +	at91_set_gpio_output(AT91_PIN_PB14, 1); // LED BACK AP1
@@ -18,13 +40,10 @@ diff -urN linux-2.6.21.5.old/arch/arm/mach-at91/board-vlink.c linux-2.6.21.5/arc
 +	at91_set_gpio_output(AT91_PIN_PB16, 1); // LED BACK AP2
 +	at91_set_gpio_output(AT91_PIN_PB17, 1); // LED BACK BP2
 +
-+/* Test jig presence detection */
++	/* Test jig presence detection */
 +	at91_set_gpio_input(AT91_PIN_PB8, 1);   // JIGPRESENT
- 
- /* SIM Cards */
--       at91_set_gpio_output(AT91_PIN_PB9, 1);  // ENBSC3
--       at91_set_gpio_output(AT91_PIN_PB10, 1); // ENBSC2
--       at91_set_gpio_output(AT91_PIN_PB11, 1); // ENBSC1
++
++	/* SIM Cards */
 +	if (at91_get_gpio_value(AT91_PIN_PB8)) {
 +		at91_set_gpio_output(AT91_PIN_PB11, 0);
 +		at91_set_gpio_output(AT91_PIN_PB9, 1);
@@ -32,24 +51,16 @@ diff -urN linux-2.6.21.5.old/arch/arm/mach-at91/board-vlink.c linux-2.6.21.5/arc
 +		at91_set_gpio_output(AT91_PIN_PB11, 1);
 +		at91_set_gpio_output(AT91_PIN_PB9, 0);
 +	}
-+		
++
 +	at91_set_gpio_output(AT91_PIN_PB10, 1); // ENBSC2
- 
- /* GSM Module Control */
--       at91_set_gpio_output(AT91_PIN_PB12, 1); // GSMONOFF
--
--/* Test jig presence detection */
--       at91_set_gpio_input(AT91_PIN_PB8, 1);   // JIGPRESENT
++
++	/* GSM Module Control */
 +	at91_set_gpio_output(AT91_PIN_PB12, 1); // GSMONOFF
- 
- /* Power indicator */
--       at91_set_gpio_input(AT91_PIN_PB22, 1);  // PWR_IND
++
++	/* Power indicator */
 +	at91_set_gpio_input(AT91_PIN_PB22, 1);  // PWR_IND
- 
- /* USB Device control */
--       at91_set_gpio_input(AT91_PIN_PB27, 1);  // UDB_CNX
--       at91_set_gpio_output(AT91_PIN_PB28, 1); // UDB_PUP
--			 at91_set_multi_drive(AT91_PIN_PB28, 1); // Set to multi-drive
++
++	/* USB Device control */
 +	at91_set_gpio_input(AT91_PIN_PB27, 1);  // UDB_CNX
 +	at91_set_gpio_output(AT91_PIN_PB28, 1); // UDB_PUP
 +	at91_set_multi_drive(AT91_PIN_PB28, 1); // Set to multi-drive

target/linux/at91/patches-2.6.21/016-v1-15-detect.patch

@@ -1,7 +1,8 @@
-diff -urN linux-2.6.21.5.old/arch/arm/mach-at91/at91rm9200_devices.c linux-2.6.21.5/arch/arm/mach-at91/at91rm9200_devices.c
---- linux-2.6.21.5.old/arch/arm/mach-at91/at91rm9200_devices.c	2008-03-13 16:24:18.000000000 +0100
-+++ linux-2.6.21.5/arch/arm/mach-at91/at91rm9200_devices.c	2008-03-13 16:34:43.000000000 +0100
-@@ -840,9 +840,9 @@
+Index: linux-2.6.21.7/arch/arm/mach-at91/at91rm9200_devices.c
+===================================================================
+--- linux-2.6.21.7.orig/arch/arm/mach-at91/at91rm9200_devices.c
++++ linux-2.6.21.7/arch/arm/mach-at91/at91rm9200_devices.c
+@@ -840,9 +840,9 @@ static inline void configure_usart3_pins
  	at91_set_B_periph(AT91_PIN_PA6, 0);		/* RXD3 */
  	at91_set_B_periph(AT91_PIN_PB0, 0);   /* RTS3 */
  	at91_set_B_periph(AT91_PIN_PB1, 0);   /* CTS3 */
@@ -14,10 +15,11 @@ diff -urN linux-2.6.21.5.old/arch/arm/mach-at91/at91rm9200_devices.c linux-2.6.2
  	at91_set_deglitch(AT91_PIN_PA24, 1);
  }
  
-diff -urN linux-2.6.21.5.old/arch/arm/mach-at91/board-vlink.c linux-2.6.21.5/arch/arm/mach-at91/board-vlink.c
---- linux-2.6.21.5.old/arch/arm/mach-at91/board-vlink.c	2008-03-13 16:24:18.000000000 +0100
-+++ linux-2.6.21.5/arch/arm/mach-at91/board-vlink.c	2008-03-13 16:35:05.000000000 +0100
-@@ -126,6 +126,7 @@
+Index: linux-2.6.21.7/arch/arm/mach-at91/board-vlink.c
+===================================================================
+--- linux-2.6.21.7.orig/arch/arm/mach-at91/board-vlink.c
++++ linux-2.6.21.7/arch/arm/mach-at91/board-vlink.c
+@@ -126,6 +126,7 @@ static struct spi_board_info vlink_spi_d
  
  static void __init vlink_board_init(void)
  {
@@ -25,7 +27,7 @@ diff -urN linux-2.6.21.5.old/arch/arm/mach-at91/board-vlink.c linux-2.6.21.5/arc
  	/* Serial */
  	at91_add_device_serial();
  	/* Ethernet */
-@@ -147,6 +148,10 @@
+@@ -147,6 +148,10 @@ static void __init vlink_board_init(void
  //	at91_set_gpio_output(AT91_PIN_PB22, 1);	/* this MMC card slot can optionally use SPI signaling (CS3). */
  	at91_add_device_mmc(0, &vlink_mmc_data);
  #endif
@@ -36,8 +38,8 @@ diff -urN linux-2.6.21.5.old/arch/arm/mach-at91/board-vlink.c linux-2.6.21.5/arc
  	/* LEDs */
  //	at91_gpio_leds(vlink_leds, ARRAY_SIZE(vlink_leds));
  
-@@ -164,10 +169,16 @@
- /* SIM Cards */
+@@ -164,10 +169,16 @@ static void __init vlink_board_init(void
+ 	/* SIM Cards */
  	if (at91_get_gpio_value(AT91_PIN_PB8)) {
  		at91_set_gpio_output(AT91_PIN_PB11, 0);
 -		at91_set_gpio_output(AT91_PIN_PB9, 1);
@@ -53,9 +55,9 @@ diff -urN linux-2.6.21.5.old/arch/arm/mach-at91/board-vlink.c linux-2.6.21.5/arc
 +		else
 +			at91_set_gpio_output(AT91_PIN_PC13, 0);
  	}
- 		
+ 
  	at91_set_gpio_output(AT91_PIN_PB10, 1); // ENBSC2
-@@ -182,7 +193,18 @@
+@@ -182,7 +193,18 @@ static void __init vlink_board_init(void
  	at91_set_gpio_input(AT91_PIN_PB27, 1);  // UDB_CNX
  	at91_set_gpio_output(AT91_PIN_PB28, 1); // UDB_PUP
  	at91_set_multi_drive(AT91_PIN_PB28, 1); // Set to multi-drive
@@ -75,10 +77,11 @@ diff -urN linux-2.6.21.5.old/arch/arm/mach-at91/board-vlink.c linux-2.6.21.5/arc
  }
  
  MACHINE_START(VLINK, "FDL VersaLink")
-diff -urN linux-2.6.21.5.old/drivers/char/vlink_giu.c linux-2.6.21.5/drivers/char/vlink_giu.c
---- linux-2.6.21.5.old/drivers/char/vlink_giu.c	2008-03-13 16:24:18.000000000 +0100
-+++ linux-2.6.21.5/drivers/char/vlink_giu.c	2008-03-13 16:37:06.000000000 +0100
-@@ -41,8 +41,7 @@
+Index: linux-2.6.21.7/drivers/char/vlink_giu.c
+===================================================================
+--- linux-2.6.21.7.orig/drivers/char/vlink_giu.c
++++ linux-2.6.21.7/drivers/char/vlink_giu.c
+@@ -41,8 +41,7 @@ static int major;	/* default is dynamic 
  module_param(major, int, 0);
  MODULE_PARM_DESC(major, "Major device number");
  
@@ -88,7 +91,7 @@ diff -urN linux-2.6.21.5.old/drivers/char/vlink_giu.c linux-2.6.21.5/drivers/cha
  struct vio_dev {
  	struct cdev cdev;
  };
-@@ -50,6 +49,53 @@
+@@ -50,6 +49,53 @@ struct vio_dev {
  struct vio_dev *vio_devices;
  static struct class *vio_class;
  
@@ -142,7 +145,7 @@ diff -urN linux-2.6.21.5.old/drivers/char/vlink_giu.c linux-2.6.21.5/drivers/cha
  static ssize_t gpio_read(struct file *file, char __user *buf, size_t len,
                           loff_t *ppos)
  {
-@@ -160,6 +206,8 @@
+@@ -160,6 +206,8 @@ static int vio_probe(struct platform_dev
  {
  	int retval, i, j;
  	dev_t vdev = 0;
@@ -151,7 +154,7 @@ diff -urN linux-2.6.21.5.old/drivers/char/vlink_giu.c linux-2.6.21.5/drivers/cha
  
  	if (major) {
  		vdev = MKDEV(major, 0);
-@@ -185,6 +233,7 @@
+@@ -185,6 +233,7 @@ static int vio_probe(struct platform_dev
  		vio_remove(dev);
  		return PTR_ERR(vio_class);
  	}
@@ -159,7 +162,7 @@ diff -urN linux-2.6.21.5.old/drivers/char/vlink_giu.c linux-2.6.21.5/drivers/cha
  
  	vio_devices = kmalloc(VIO_NR_DEVS * sizeof(struct vio_dev), GFP_KERNEL);
  	if (!vio_devices) {
-@@ -198,8 +247,10 @@
+@@ -198,8 +247,10 @@ static int vio_probe(struct platform_dev
  			int iodev = at91_is_pin_gpio(PIN_BASE + i*32 + j);
  			if (iodev) {
  				vio_setup_cdev(&vio_devices[i*32 + j], i*32 + j);
@@ -172,7 +175,7 @@ diff -urN linux-2.6.21.5.old/drivers/char/vlink_giu.c linux-2.6.21.5/drivers/cha
  			}
  		}
  
-@@ -212,6 +263,29 @@
+@@ -212,6 +263,29 @@ fail:
  	return retval;
  }
  

target/linux/at91/patches-2.6.22/001-vlink-machine.patch

@@ -1,6 +1,7 @@
-diff -urN linux-2.6.22.1.old/arch/arm/boot/compressed/head-at91rm9200.S linux-2.6.22.1/arch/arm/boot/compressed/head-at91rm9200.S
---- linux-2.6.22.1.old/arch/arm/boot/compressed/head-at91rm9200.S	2007-07-29 06:33:09.000000000 +0200
-+++ linux-2.6.22.1/arch/arm/boot/compressed/head-at91rm9200.S	2007-07-29 06:39:45.000000000 +0200
+Index: linux-2.6.22.19/arch/arm/boot/compressed/head-at91rm9200.S
+===================================================================
+--- linux-2.6.22.19.orig/arch/arm/boot/compressed/head-at91rm9200.S
++++ linux-2.6.22.19/arch/arm/boot/compressed/head-at91rm9200.S
 @@ -67,6 +67,12 @@
  		cmp	r7, r3
  		beq	99f
@@ -14,9 +15,10 @@ diff -urN linux-2.6.22.1.old/arch/arm/boot/compressed/head-at91rm9200.S linux-2.
  		@ Ajeco 1ARM : 1075
  		mov	r3,	#(MACH_TYPE_ONEARM & 0xff)
  		orr	r3, r3, #(MACH_TYPE_ONEARM & 0xff00)
-diff -urN linux-2.6.22.1.old/arch/arm/mach-at91/board-vlink.c linux-2.6.22.1/arch/arm/mach-at91/board-vlink.c
---- linux-2.6.22.1.old/arch/arm/mach-at91/board-vlink.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.22.1/arch/arm/mach-at91/board-vlink.c	2007-07-29 06:40:47.000000000 +0200
+Index: linux-2.6.22.19/arch/arm/mach-at91/board-vlink.c
+===================================================================
+--- /dev/null
++++ linux-2.6.22.19/arch/arm/mach-at91/board-vlink.c
 @@ -0,0 +1,191 @@
 +/*
 + * linux/arch/arm/mach-at91/board-vlink.c
@@ -209,10 +211,11 @@ diff -urN linux-2.6.22.1.old/arch/arm/mach-at91/board-vlink.c linux-2.6.22.1/arc
 +	.init_irq	= vlink_init_irq,
 +	.init_machine	= vlink_board_init,
 +MACHINE_END
-diff -urN linux-2.6.22.1.old/arch/arm/mach-at91/Kconfig linux-2.6.22.1/arch/arm/mach-at91/Kconfig
---- linux-2.6.22.1.old/arch/arm/mach-at91/Kconfig	2007-07-29 06:33:09.000000000 +0200
-+++ linux-2.6.22.1/arch/arm/mach-at91/Kconfig	2007-07-29 06:42:19.000000000 +0200
-@@ -103,6 +103,12 @@
+Index: linux-2.6.22.19/arch/arm/mach-at91/Kconfig
+===================================================================
+--- linux-2.6.22.19.orig/arch/arm/mach-at91/Kconfig
++++ linux-2.6.22.19/arch/arm/mach-at91/Kconfig
+@@ -103,6 +103,12 @@ config MACH_CHUB
  	help
  	  Select this if you are using Promwad's Chub board.
  
@@ -225,10 +228,11 @@ diff -urN linux-2.6.22.1.old/arch/arm/mach-at91/Kconfig linux-2.6.22.1/arch/arm/
  endif
  
  # ----------------------------------------------------------
-diff -urN linux-2.6.22.1.old/arch/arm/mach-at91/Makefile linux-2.6.22.1/arch/arm/mach-at91/Makefile
---- linux-2.6.22.1.old/arch/arm/mach-at91/Makefile	2007-07-29 06:33:09.000000000 +0200
-+++ linux-2.6.22.1/arch/arm/mach-at91/Makefile	2007-07-29 06:43:36.000000000 +0200
-@@ -29,6 +29,7 @@
+Index: linux-2.6.22.19/arch/arm/mach-at91/Makefile
+===================================================================
+--- linux-2.6.22.19.orig/arch/arm/mach-at91/Makefile
++++ linux-2.6.22.19/arch/arm/mach-at91/Makefile
+@@ -29,6 +29,7 @@ obj-$(CONFIG_MACH_KB9200)	+= board-kb920
  obj-$(CONFIG_MACH_ATEB9200)	+= board-eb9200.o
  obj-$(CONFIG_MACH_KAFA)		+= board-kafa.o
  obj-$(CONFIG_MACH_CHUB)		+= board-chub.o
@@ -236,7 +240,7 @@ diff -urN linux-2.6.22.1.old/arch/arm/mach-at91/Makefile linux-2.6.22.1/arch/arm
  obj-$(CONFIG_MACH_PICOTUX2XX)	+= board-picotux200.o
  
  # AT91SAM9260 board-specific support
-@@ -52,6 +53,7 @@
+@@ -52,6 +53,7 @@ led-$(CONFIG_MACH_CSB337)	+= leds.o
  led-$(CONFIG_MACH_CSB637)	+= leds.o
  led-$(CONFIG_MACH_KB9200)	+= leds.o
  led-$(CONFIG_MACH_KAFA)		+= leds.o

target/linux/at91/patches-2.6.22/002-led-driver.patch

@@ -1,7 +1,8 @@
-diff -urN linux-2.6.22.1.old/arch/arm/mach-at91/Makefile linux-2.6.22.1/arch/arm/mach-at91/Makefile
---- linux-2.6.22.1.old/arch/arm/mach-at91/Makefile	2007-07-29 06:46:13.000000000 +0200
-+++ linux-2.6.22.1/arch/arm/mach-at91/Makefile	2007-07-29 06:54:19.000000000 +0200
-@@ -53,7 +53,7 @@
+Index: linux-2.6.22.19/arch/arm/mach-at91/Makefile
+===================================================================
+--- linux-2.6.22.19.orig/arch/arm/mach-at91/Makefile
++++ linux-2.6.22.19/arch/arm/mach-at91/Makefile
+@@ -53,7 +53,7 @@ led-$(CONFIG_MACH_CSB337)	+= leds.o
  led-$(CONFIG_MACH_CSB637)	+= leds.o
  led-$(CONFIG_MACH_KB9200)	+= leds.o
  led-$(CONFIG_MACH_KAFA)		+= leds.o
@@ -10,9 +11,10 @@ diff -urN linux-2.6.22.1.old/arch/arm/mach-at91/Makefile linux-2.6.22.1/arch/arm
  obj-$(CONFIG_LEDS) += $(led-y)
  
  # VGA support
-diff -urN linux-2.6.22.1.old/arch/arm/mach-at91/vlink_leds.c linux-2.6.22.1/arch/arm/mach-at91/vlink_leds.c
---- linux-2.6.22.1.old/arch/arm/mach-at91/vlink_leds.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.22.1/arch/arm/mach-at91/vlink_leds.c	2007-07-29 06:54:58.000000000 +0200
+Index: linux-2.6.22.19/arch/arm/mach-at91/vlink_leds.c
+===================================================================
+--- /dev/null
++++ linux-2.6.22.19/arch/arm/mach-at91/vlink_leds.c
 @@ -0,0 +1,105 @@
 +/*
 + * LED driver for Atmel AT91-based boards.

target/linux/at91/patches-2.6.22/003-gpio-driver.patch

@@ -1,6 +1,7 @@
-diff -urN linux-2.6.22.1.old/arch/arm/mach-at91/gpio.c linux-2.6.22.1/arch/arm/mach-at91/gpio.c
---- linux-2.6.22.1.old/arch/arm/mach-at91/gpio.c	2007-07-10 20:56:30.000000000 +0200
-+++ linux-2.6.22.1/arch/arm/mach-at91/gpio.c	2007-07-29 07:03:30.000000000 +0200
+Index: linux-2.6.22.19/arch/arm/mach-at91/gpio.c
+===================================================================
+--- linux-2.6.22.19.orig/arch/arm/mach-at91/gpio.c
++++ linux-2.6.22.19/arch/arm/mach-at91/gpio.c
 @@ -27,6 +27,7 @@
  
  static struct at91_gpio_bank *gpio;
@@ -9,7 +10,7 @@ diff -urN linux-2.6.22.1.old/arch/arm/mach-at91/gpio.c linux-2.6.22.1/arch/arm/m
  
  
  static inline void __iomem *pin_to_controller(unsigned pin)
-@@ -71,9 +72,13 @@
+@@ -71,9 +72,13 @@ int __init_or_module at91_set_GPIO_perip
  {
  	void __iomem	*pio = pin_to_controller(pin);
  	unsigned	mask = pin_to_mask(pin);
@@ -23,7 +24,7 @@ diff -urN linux-2.6.22.1.old/arch/arm/mach-at91/gpio.c linux-2.6.22.1/arch/arm/m
  	__raw_writel(mask, pio + PIO_IDR);
  	__raw_writel(mask, pio + (use_pullup ? PIO_PUER : PIO_PUDR));
  	__raw_writel(mask, pio + PIO_PER);
-@@ -130,10 +135,13 @@
+@@ -130,10 +135,13 @@ int __init_or_module at91_set_gpio_input
  {
  	void __iomem	*pio = pin_to_controller(pin);
  	unsigned	mask = pin_to_mask(pin);
@@ -37,7 +38,7 @@ diff -urN linux-2.6.22.1.old/arch/arm/mach-at91/gpio.c linux-2.6.22.1/arch/arm/m
  	__raw_writel(mask, pio + PIO_IDR);
  	__raw_writel(mask, pio + (use_pullup ? PIO_PUER : PIO_PUDR));
  	__raw_writel(mask, pio + PIO_ODR);
-@@ -151,10 +159,13 @@
+@@ -151,10 +159,13 @@ int __init_or_module at91_set_gpio_outpu
  {
  	void __iomem	*pio = pin_to_controller(pin);
  	unsigned	mask = pin_to_mask(pin);
@@ -51,7 +52,7 @@ diff -urN linux-2.6.22.1.old/arch/arm/mach-at91/gpio.c linux-2.6.22.1/arch/arm/m
  	__raw_writel(mask, pio + PIO_IDR);
  	__raw_writel(mask, pio + PIO_PUDR);
  	__raw_writel(mask, pio + (value ? PIO_SODR : PIO_CODR));
-@@ -262,6 +273,18 @@
+@@ -262,6 +273,18 @@ int at91_get_gpio_value(unsigned pin)
  }
  EXPORT_SYMBOL(at91_get_gpio_value);
  
@@ -70,10 +71,11 @@ diff -urN linux-2.6.22.1.old/arch/arm/mach-at91/gpio.c linux-2.6.22.1/arch/arm/m
  /*--------------------------------------------------------------------------*/
  
  #ifdef CONFIG_PM
-diff -urN linux-2.6.22.1.old/drivers/char/Kconfig linux-2.6.22.1/drivers/char/Kconfig
---- linux-2.6.22.1.old/drivers/char/Kconfig	2007-07-29 06:46:13.000000000 +0200
-+++ linux-2.6.22.1/drivers/char/Kconfig	2007-07-29 07:05:30.000000000 +0200
-@@ -1099,5 +1099,12 @@
+Index: linux-2.6.22.19/drivers/char/Kconfig
+===================================================================
+--- linux-2.6.22.19.orig/drivers/char/Kconfig
++++ linux-2.6.22.19/drivers/char/Kconfig
+@@ -1099,5 +1099,12 @@ config AT91_SPIDEV
  	  The SPI driver gives user mode access to this serial
  	  bus on the AT91RM9200 processor.
  
@@ -86,10 +88,11 @@ diff -urN linux-2.6.22.1.old/drivers/char/Kconfig linux-2.6.22.1/drivers/char/Kc
 +
  endmenu
  
-diff -urN linux-2.6.22.1.old/drivers/char/Makefile linux-2.6.22.1/drivers/char/Makefile
---- linux-2.6.22.1.old/drivers/char/Makefile	2007-07-29 06:46:13.000000000 +0200
-+++ linux-2.6.22.1/drivers/char/Makefile	2007-07-29 07:06:06.000000000 +0200
-@@ -95,6 +95,7 @@
+Index: linux-2.6.22.19/drivers/char/Makefile
+===================================================================
+--- linux-2.6.22.19.orig/drivers/char/Makefile
++++ linux-2.6.22.19/drivers/char/Makefile
+@@ -95,6 +95,7 @@ obj-$(CONFIG_GPIO_TB0219)	+= tb0219.o
  obj-$(CONFIG_TELCLOCK)		+= tlclk.o
  obj-$(CONFIG_AT91_SPI)		+= at91_spi.o
  obj-$(CONFIG_AT91_SPIDEV)	+= at91_spidev.o
@@ -97,9 +100,10 @@ diff -urN linux-2.6.22.1.old/drivers/char/Makefile linux-2.6.22.1/drivers/char/M
  
  obj-$(CONFIG_WATCHDOG)		+= watchdog/
  obj-$(CONFIG_MWAVE)		+= mwave/
-diff -urN linux-2.6.22.1.old/drivers/char/vlink_giu.c linux-2.6.22.1/drivers/char/vlink_giu.c
---- linux-2.6.22.1.old/drivers/char/vlink_giu.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.22.1/drivers/char/vlink_giu.c	2007-07-29 07:06:33.000000000 +0200
+Index: linux-2.6.22.19/drivers/char/vlink_giu.c
+===================================================================
+--- /dev/null
++++ linux-2.6.22.19/drivers/char/vlink_giu.c
 @@ -0,0 +1,256 @@
 +/*
 + *  Driver for FDL Versalink GPIO

target/linux/at91/patches-2.6.22/007-mtd-partition.patch

@@ -1,7 +1,8 @@
-diff -urN linux-2.6.22.1.old/drivers/mtd/devices/at91_dataflash.c linux-2.6.22.1/drivers/mtd/devices/at91_dataflash.c
---- linux-2.6.22.1.old/drivers/mtd/devices/at91_dataflash.c	2007-07-29 07:50:05.000000000 +0200
-+++ linux-2.6.22.1/drivers/mtd/devices/at91_dataflash.c	2007-07-29 07:56:11.000000000 +0200
-@@ -173,7 +173,7 @@
+Index: linux-2.6.22.19/drivers/mtd/devices/at91_dataflash.c
+===================================================================
+--- linux-2.6.22.19.orig/drivers/mtd/devices/at91_dataflash.c
++++ linux-2.6.22.19/drivers/mtd/devices/at91_dataflash.c
+@@ -173,7 +173,7 @@ static struct mtd_partition static_parti
  };
  #endif
  
@@ -10,10 +11,11 @@ diff -urN linux-2.6.22.1.old/drivers/mtd/devices/at91_dataflash.c linux-2.6.22.1
  
  #endif
  
-diff -urN linux-2.6.22.1.old/drivers/mtd/Kconfig linux-2.6.22.1/drivers/mtd/Kconfig
---- linux-2.6.22.1.old/drivers/mtd/Kconfig	2007-07-29 07:54:27.000000000 +0200
-+++ linux-2.6.22.1/drivers/mtd/Kconfig	2007-07-29 07:55:21.000000000 +0200
-@@ -160,6 +160,12 @@
+Index: linux-2.6.22.19/drivers/mtd/Kconfig
+===================================================================
+--- linux-2.6.22.19.orig/drivers/mtd/Kconfig
++++ linux-2.6.22.19/drivers/mtd/Kconfig
+@@ -160,6 +160,12 @@ config MTD_AFS_PARTS
  	  for your particular device. It won't happen automatically. The
  	  'armflash' map driver (CONFIG_MTD_ARMFLASH) does this, for example.
  
@@ -26,10 +28,11 @@ diff -urN linux-2.6.22.1.old/drivers/mtd/Kconfig linux-2.6.22.1/drivers/mtd/Kcon
  comment "User Modules And Translation Layers"
  
  config MTD_CHAR
-diff -urN linux-2.6.22.1.old/drivers/mtd/Makefile linux-2.6.22.1/drivers/mtd/Makefile
---- linux-2.6.22.1.old/drivers/mtd/Makefile	2007-07-10 20:56:30.000000000 +0200
-+++ linux-2.6.22.1/drivers/mtd/Makefile	2007-07-29 07:55:39.000000000 +0200
-@@ -11,6 +11,7 @@
+Index: linux-2.6.22.19/drivers/mtd/Makefile
+===================================================================
+--- linux-2.6.22.19.orig/drivers/mtd/Makefile
++++ linux-2.6.22.19/drivers/mtd/Makefile
+@@ -11,6 +11,7 @@ obj-$(CONFIG_MTD_CONCAT)	+= mtdconcat.o
  obj-$(CONFIG_MTD_REDBOOT_PARTS) += redboot.o
  obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdlinepart.o
  obj-$(CONFIG_MTD_AFS_PARTS)	+= afs.o

target/linux/at91/patches-2.6.22/008-fdl-serial.patch

@@ -1,6 +1,8 @@
---- linux-2.6.21.1.orig/drivers/serial/atmel_serial.c	2007-05-28 12:22:29.000000000 +0200
-+++ linux-2.6.21.1/drivers/serial/atmel_serial.c	2007-05-28 16:39:09.000000000 +0200
-@@ -174,7 +174,35 @@
+Index: linux-2.6.22.19/drivers/serial/atmel_serial.c
+===================================================================
+--- linux-2.6.22.19.orig/drivers/serial/atmel_serial.c
++++ linux-2.6.22.19/drivers/serial/atmel_serial.c
+@@ -174,7 +174,35 @@ static void atmel_set_mctrl(struct uart_
  				at91_set_gpio_value(AT91_PIN_PA21, 0);
  			else
  				at91_set_gpio_value(AT91_PIN_PA21, 1);
@@ -36,7 +38,7 @@
  	}
  #endif
  
-@@ -211,8 +239,10 @@
+@@ -211,8 +239,10 @@ static u_int atmel_get_mctrl(struct uart
  	/*
  	 * The control signals are active low.
  	 */
@@ -49,7 +51,7 @@
  	if (!(status & ATMEL_US_CTS))
  		ret |= TIOCM_CTS;
  	if (!(status & ATMEL_US_DSR))
-@@ -220,6 +250,16 @@
+@@ -220,6 +250,16 @@ static u_int atmel_get_mctrl(struct uart
  	if (!(status & ATMEL_US_RI))
  		ret |= TIOCM_RI;
  
@@ -66,7 +68,7 @@
  	return ret;
  }
  
-@@ -511,6 +551,34 @@
+@@ -511,6 +551,34 @@ static void atmel_tx_chars(struct uart_p
  }
  
  /*
@@ -101,7 +103,7 @@
   * Interrupt handler
   */
  static irqreturn_t atmel_interrupt(int irq, void *dev_id)
-@@ -587,6 +655,23 @@
+@@ -587,6 +655,23 @@ static int atmel_startup(struct uart_por
  		return retval;
  	}
  
@@ -125,7 +127,7 @@
  	/*
  	 * Initialize DMA (if necessary)
  	 */
-@@ -603,6 +688,10 @@
+@@ -603,6 +688,10 @@ static int atmel_startup(struct uart_por
  					kfree(atmel_port->pdc_rx[0].buf);
  				}
  				free_irq(port->irq, port);
@@ -136,7 +138,7 @@
  				return -ENOMEM;
  			}
  			pdc->dma_addr = dma_map_single(port->dev, pdc->buf, PDC_BUFFER_SIZE, DMA_FROM_DEVICE);
-@@ -636,6 +725,10 @@
+@@ -636,6 +725,10 @@ static int atmel_startup(struct uart_por
  		retval = atmel_open_hook(port);
  		if (retval) {
  			free_irq(port->irq, port);
@@ -147,7 +149,7 @@
  			return retval;
  		}
  	}
-@@ -701,6 +794,10 @@
+@@ -701,6 +794,10 @@ static void atmel_shutdown(struct uart_p
  	 * Free the interrupt
  	 */
  	free_irq(port->irq, port);

target/linux/at91/patches-2.6.22/009-fdl-uartinit.patch

@@ -1,7 +1,8 @@
-diff -urN linux-2.6.22.1.old/arch/arm/mach-at91/at91rm9200_devices.c linux-2.6.22.1/arch/arm/mach-at91/at91rm9200_devices.c
---- linux-2.6.22.1.old/arch/arm/mach-at91/at91rm9200_devices.c	2007-07-29 06:46:13.000000000 +0200
-+++ linux-2.6.22.1/arch/arm/mach-at91/at91rm9200_devices.c	2007-07-29 07:23:35.000000000 +0200
-@@ -721,6 +721,10 @@
+Index: linux-2.6.22.19/arch/arm/mach-at91/at91rm9200_devices.c
+===================================================================
+--- linux-2.6.22.19.orig/arch/arm/mach-at91/at91rm9200_devices.c
++++ linux-2.6.22.19/arch/arm/mach-at91/at91rm9200_devices.c
+@@ -721,6 +721,10 @@ static inline void configure_usart0_pins
  	 *  We need to drive the pin manually.  Default is off (RTS is active low).
  	 */
  	at91_set_gpio_output(AT91_PIN_PA21, 1);
@@ -12,7 +13,7 @@ diff -urN linux-2.6.22.1.old/arch/arm/mach-at91/at91rm9200_devices.c linux-2.6.2
  }
  
  static struct resource uart1_resources[] = {
-@@ -832,6 +836,12 @@
+@@ -832,6 +836,12 @@ static inline void configure_usart3_pins
  {
  	at91_set_B_periph(AT91_PIN_PA5, 1);		/* TXD3 */
  	at91_set_B_periph(AT91_PIN_PA6, 0);		/* RXD3 */

target/linux/at91/patches-2.6.22/010-dm9161a-phyfix.patch

@@ -1,6 +1,8 @@
---- linux-2.6.21.1/drivers/net/arm/at91_ether.c.old	2007-06-04 18:15:49.000000000 +0200
-+++ linux-2.6.21.1/drivers/net/arm/at91_ether.c	2007-06-04 18:10:36.000000000 +0200
-@@ -146,6 +146,7 @@
+Index: linux-2.6.22.19/drivers/net/arm/at91_ether.c
+===================================================================
+--- linux-2.6.22.19.orig/drivers/net/arm/at91_ether.c
++++ linux-2.6.22.19/drivers/net/arm/at91_ether.c
+@@ -146,6 +146,7 @@ static void update_linkspeed(struct net_
  	struct at91_private *lp = netdev_priv(dev);
  	unsigned int bmsr, bmcr, lpa, mac_cfg;
  	unsigned int speed, duplex;
@@ -8,7 +10,7 @@
  
  	if (!mii_link_ok(&lp->mii)) {		/* no link */
  		netif_carrier_off(dev);
-@@ -158,8 +159,15 @@
+@@ -158,8 +159,15 @@ static void update_linkspeed(struct net_
  	read_phy(lp->phy_address, MII_BMSR, &bmsr);
  	read_phy(lp->phy_address, MII_BMCR, &bmcr);
  	if (bmcr & BMCR_ANENABLE) {				/* AutoNegotiation is enabled */

target/linux/at91/patches-2.6.22/014-initpartition.patch

@@ -1,7 +1,8 @@
-diff -urN linux-2.6.22.1.old/drivers/mtd/devices/at91_dataflash.c linux-2.6.22.1/drivers/mtd/devices/at91_dataflash.c
---- linux-2.6.22.1.old/drivers/mtd/devices/at91_dataflash.c	2007-07-29 07:18:10.000000000 +0200
-+++ linux-2.6.22.1/drivers/mtd/devices/at91_dataflash.c	2007-07-29 07:32:52.000000000 +0200
-@@ -161,12 +161,12 @@
+Index: linux-2.6.22.19/drivers/mtd/devices/at91_dataflash.c
+===================================================================
+--- linux-2.6.22.19.orig/drivers/mtd/devices/at91_dataflash.c
++++ linux-2.6.22.19/drivers/mtd/devices/at91_dataflash.c
+@@ -161,12 +161,12 @@ static struct mtd_partition static_parti
  		.mask_flags	= MTD_WRITEABLE,	/* read-only */
  	},
  	{