kernel: move Lantiq PEF7061/7071/7072 phy driver to generic

The driver is used for boards outside the lantiq target as well. Move
it to generic to make it available for more targets.

The phy driver is included in kernel 4.8 as INTEL_XWAY_PHY.

Signed-off-by: Mathias Kresin <[email protected]>

target/linux/generic/config-4.4

@@ -1883,6 +1883,7 @@ CONFIG_KUSER_HELPERS=y
 # CONFIG_L2TP_V3 is not set
 # CONFIG_LANMEDIA is not set
 # CONFIG_LANTIQ is not set
+# CONFIG_LANTIQ_PHY is not set
 # CONFIG_LAPB is not set
 # CONFIG_LASAT is not set
 # CONFIG_LATENCYTOP is not set

target/linux/lantiq/patches-4.4/0023-NET-PHY-adds-driver-for-lantiq-PHY11G.patch → target/linux/generic/patches-4.4/074-NET-PHY-adds-driver-for-lantiq-PHY11G.patch

@@ -13,9 +13,9 @@ Signed-off-by: John Crispin <[email protected]>
 
 --- a/drivers/net/phy/Kconfig
 +++ b/drivers/net/phy/Kconfig
-@@ -202,6 +202,11 @@ config RTL8306_PHY
- 	tristate "Driver for Realtek RTL8306S switches"
- 	select SWCONFIG
+@@ -156,6 +156,11 @@ config MICROCHIP_PHY
+ 	help
+ 	  Supports the LAN88XX PHYs.
  
 +config LANTIQ_PHY
 +	tristate "Driver for Lantiq PHYs"
@@ -27,7 +27,7 @@ Signed-off-by: John Crispin <[email protected]>
  	depends on PHYLIB
 --- a/drivers/net/phy/Makefile
 +++ b/drivers/net/phy/Makefile
-@@ -46,6 +46,7 @@ obj-$(CONFIG_DP83848_PHY)	+= dp83848.o
+@@ -30,6 +30,7 @@ obj-$(CONFIG_DP83848_PHY)	+= dp83848.o
  obj-$(CONFIG_DP83867_PHY)	+= dp83867.o
  obj-$(CONFIG_STE10XP)		+= ste10Xp.o
  obj-$(CONFIG_MICREL_PHY)	+= micrel.o

target/linux/generic/patches-4.4/720-phy_adm6996.patch

@@ -1,8 +1,8 @@
 --- a/drivers/net/phy/Kconfig
 +++ b/drivers/net/phy/Kconfig
-@@ -170,6 +170,13 @@ config MICROCHIP_PHY
- 	help
- 	  Supports the LAN88XX PHYs.
+@@ -175,6 +175,13 @@ config LANTIQ_PHY
+ 	---help---
+ 	  Supports the 11G and 22F PHYs.
  
 +config ADM6996_PHY
 +	tristate "Driver for ADM6996 switches"

target/linux/generic/patches-4.4/722-phy_mvswitch.patch

@@ -1,6 +1,6 @@
 --- a/drivers/net/phy/Kconfig
 +++ b/drivers/net/phy/Kconfig
-@@ -177,6 +177,10 @@ config ADM6996_PHY
+@@ -182,6 +182,10 @@ config ADM6996_PHY
  	  Currently supports the ADM6996FC and ADM6996M switches.
  	  Support for FC is very limited.
  

target/linux/generic/patches-4.4/723-phy_ip175c.patch

@@ -1,6 +1,6 @@
 --- a/drivers/net/phy/Kconfig
 +++ b/drivers/net/phy/Kconfig
-@@ -181,6 +181,10 @@ config MVSWITCH_PHY
+@@ -186,6 +186,10 @@ config MVSWITCH_PHY
  	tristate "Driver for Marvell 88E6060 switches"
  	select ETHERNET_PACKET_MANGLE
  

target/linux/generic/patches-4.4/724-phy_ar8216.patch

@@ -1,6 +1,6 @@
 --- a/drivers/net/phy/Kconfig
 +++ b/drivers/net/phy/Kconfig
-@@ -185,6 +185,11 @@ config IP17XX_PHY
+@@ -190,6 +190,11 @@ config IP17XX_PHY
  	tristate "Driver for IC+ IP17xx switches"
  	select SWCONFIG
  

target/linux/generic/patches-4.4/725-phy_rtl8306.patch

@@ -1,6 +1,6 @@
 --- a/drivers/net/phy/Kconfig
 +++ b/drivers/net/phy/Kconfig
-@@ -190,6 +190,10 @@ config AR8216_PHY
+@@ -195,6 +195,10 @@ config AR8216_PHY
  	select ETHERNET_PACKET_MANGLE
  	select SWCONFIG
  

target/linux/generic/patches-4.4/726-phy_rtl8366.patch

@@ -1,6 +1,6 @@
 --- a/drivers/net/phy/Kconfig
 +++ b/drivers/net/phy/Kconfig
-@@ -294,6 +294,30 @@ config MDIO_BCM_IPROC
+@@ -299,6 +299,30 @@ config MDIO_BCM_IPROC
  	  This module provides a driver for the MDIO busses found in the
  	  Broadcom iProc SoC's.
  

target/linux/generic/patches-4.4/727-phy-rtl8367.patch

@@ -1,6 +1,6 @@
 --- a/drivers/net/phy/Kconfig
 +++ b/drivers/net/phy/Kconfig
-@@ -316,6 +316,10 @@ config RTL8366RB_PHY
+@@ -321,6 +321,10 @@ config RTL8366RB_PHY
  	tristate "Driver for the Realtek RTL8366RB switch"
  	select SWCONFIG
  

target/linux/generic/patches-4.4/728-phy-rtl8367b.patch

@@ -1,6 +1,6 @@
 --- a/drivers/net/phy/Kconfig
 +++ b/drivers/net/phy/Kconfig
-@@ -320,6 +320,10 @@ config RTL8367_PHY
+@@ -325,6 +325,10 @@ config RTL8367_PHY
  	tristate "Driver for the Realtek RTL8367R/M switches"
  	select SWCONFIG
  

target/linux/generic/patches-4.4/729-phy-tantos.patch

@@ -1,6 +1,6 @@
 --- a/drivers/net/phy/Kconfig
 +++ b/drivers/net/phy/Kconfig
-@@ -331,3 +331,8 @@ endif # PHYLIB
+@@ -336,3 +336,8 @@ endif # PHYLIB
  config MICREL_KS8995MA
  	tristate "Micrel KS8995MA 5-ports 10/100 managed Ethernet switch"
  	depends on SPI

target/linux/generic/patches-4.4/730-phy_b53.patch

@@ -1,6 +1,6 @@
 --- a/drivers/net/phy/Kconfig
 +++ b/drivers/net/phy/Kconfig
-@@ -326,6 +326,8 @@ config RTL8367B_PHY
+@@ -331,6 +331,8 @@ config RTL8367B_PHY
  
  endif # RTL8366_SMI
  

target/linux/generic/patches-4.4/732-phy-ar8216-led-support.patch

@@ -1,6 +1,6 @@
 --- a/drivers/net/phy/Kconfig
 +++ b/drivers/net/phy/Kconfig
-@@ -190,6 +190,10 @@ config AR8216_PHY
+@@ -195,6 +195,10 @@ config AR8216_PHY
  	select ETHERNET_PACKET_MANGLE
  	select SWCONFIG
  

target/linux/generic/patches-4.4/733-phy_mvsw61xx.patch

@@ -1,6 +1,6 @@
 --- a/drivers/net/phy/Kconfig
 +++ b/drivers/net/phy/Kconfig
-@@ -181,6 +181,10 @@ config MVSWITCH_PHY
+@@ -186,6 +186,10 @@ config MVSWITCH_PHY
  	tristate "Driver for Marvell 88E6060 switches"
  	select ETHERNET_PACKET_MANGLE
  

target/linux/lantiq/config-4.4

@@ -110,7 +110,6 @@ CONFIG_IRQ_WORK=y
 CONFIG_LANTIQ=y
 CONFIG_LANTIQ_DT_NONE=y
 CONFIG_LANTIQ_ETOP=y
-# CONFIG_LANTIQ_PHY is not set
 CONFIG_LANTIQ_WDT=y
 # CONFIG_LANTIQ_XRX200 is not set
 CONFIG_LEDS_GPIO=y