|
|
@@ -1,226 +0,0 @@
|
|
|
---- a/arch/arm/mach-kirkwood/Makefile
|
|
|
-+++ b/arch/arm/mach-kirkwood/Makefile
|
|
|
-@@ -8,6 +8,7 @@ obj-$(CONFIG_MACH_SHEEVAPLUG) += sheeva
|
|
|
- obj-$(CONFIG_MACH_ESATA_SHEEVAPLUG) += sheevaplug-setup.o
|
|
|
- obj-$(CONFIG_MACH_GURUPLUG) += guruplug-setup.o
|
|
|
- obj-$(CONFIG_MACH_DOCKSTAR) += dockstar-setup.o
|
|
|
-+obj-$(CONFIG_MACH_ICONNECT) += iconnect-setup.o
|
|
|
- obj-$(CONFIG_MACH_TS219) += ts219-setup.o tsx1x-common.o
|
|
|
- obj-$(CONFIG_MACH_TS41X) += ts41x-setup.o tsx1x-common.o
|
|
|
- obj-$(CONFIG_MACH_OPENRD) += openrd-setup.o
|
|
|
---- a/arch/arm/mach-kirkwood/Kconfig
|
|
|
-+++ b/arch/arm/mach-kirkwood/Kconfig
|
|
|
-@@ -130,6 +130,12 @@ config MACH_T5325
|
|
|
- Say 'Y' here if you want your kernel to support the
|
|
|
- HP t5325 Thin Client.
|
|
|
-
|
|
|
-+config MACH_ICONNECT
|
|
|
-+ bool "Iomega iConnect Wireless"
|
|
|
-+ help
|
|
|
-+ Say 'Y' here if you want your kernel to support the
|
|
|
-+ Iomega iConnect Wireless.
|
|
|
-+
|
|
|
- endmenu
|
|
|
-
|
|
|
- endif
|
|
|
---- a/arch/arm/mach-kirkwood/mpp.h
|
|
|
-+++ b/arch/arm/mach-kirkwood/mpp.h
|
|
|
-@@ -108,6 +108,7 @@
|
|
|
- #define MPP11_SATA0_ACTn MPP( 11, 0x5, 0, 1, 0, 1, 1, 1, 1 )
|
|
|
-
|
|
|
- #define MPP12_GPO MPP( 12, 0x0, 0, 1, 1, 1, 1, 1, 1 )
|
|
|
-+#define MPP12_GPIO MPP( 12, 0x0, 1, 1, 1, 1, 1, 1, 1 )
|
|
|
- #define MPP12_SD_CLK MPP( 12, 0x1, 0, 1, 1, 1, 1, 1, 1 )
|
|
|
- #define MPP12_AU_SPDIF0 MPP( 12, 0xa, 0, 1, 0, 0, 0, 0, 1 )
|
|
|
- #define MPP12_SPI_MOSI MPP( 12, 0xb, 0, 1, 0, 0, 0, 0, 1 )
|
|
|
---- /dev/null
|
|
|
-+++ b/arch/arm/mach-kirkwood/iconnect-setup.c
|
|
|
-@@ -0,0 +1,188 @@
|
|
|
-+/*
|
|
|
-+ * arch/arm/mach-kirkwood/iconnect-setup.c
|
|
|
-+ *
|
|
|
-+ * Iomega iConnect Wireless
|
|
|
-+ *
|
|
|
-+ * This file is licensed under the terms of the GNU General Public
|
|
|
-+ * License version 2. This program is licensed "as is" without any
|
|
|
-+ * warranty of any kind, whether express or implied.
|
|
|
-+ */
|
|
|
-+
|
|
|
-+#include <linux/kernel.h>
|
|
|
-+#include <linux/init.h>
|
|
|
-+#include <linux/platform_device.h>
|
|
|
-+#include <linux/irq.h>
|
|
|
-+#include <linux/mtd/partitions.h>
|
|
|
-+#include <linux/mv643xx_eth.h>
|
|
|
-+#include <linux/ethtool.h>
|
|
|
-+#include <linux/gpio.h>
|
|
|
-+#include <linux/gpio_keys.h>
|
|
|
-+#include <linux/input.h>
|
|
|
-+#include <linux/leds.h>
|
|
|
-+#include <asm/mach-types.h>
|
|
|
-+#include <asm/mach/arch.h>
|
|
|
-+#include <mach/kirkwood.h>
|
|
|
-+#include "common.h"
|
|
|
-+#include "mpp.h"
|
|
|
-+
|
|
|
-+static struct mtd_partition iconnect_nand_parts[] = {
|
|
|
-+ {
|
|
|
-+ .name = "u-boot",
|
|
|
-+ .offset = 0,
|
|
|
-+ .size = SZ_1M
|
|
|
-+ }, {
|
|
|
-+ .name = "uImage",
|
|
|
-+ .offset = MTDPART_OFS_NXTBLK,
|
|
|
-+ .size = SZ_1M + SZ_2M
|
|
|
-+ }, {
|
|
|
-+ .name = "rootfs",
|
|
|
-+ .offset = MTDPART_OFS_NXTBLK,
|
|
|
-+ .size = SZ_32M,
|
|
|
-+ }, {
|
|
|
-+ .name = "data",
|
|
|
-+ .offset = MTDPART_OFS_NXTBLK,
|
|
|
-+ .size = MTDPART_SIZ_FULL
|
|
|
-+ },
|
|
|
-+};
|
|
|
-+
|
|
|
-+static struct mv643xx_eth_platform_data iconnect_ge00_data = {
|
|
|
-+ .phy_addr = MV643XX_ETH_PHY_ADDR(11),
|
|
|
-+};
|
|
|
-+
|
|
|
-+static struct gpio_led iconnect_led_pins[] = {
|
|
|
-+ {
|
|
|
-+ .name = "iconnect:blue:power",
|
|
|
-+ .default_trigger = "default-on",
|
|
|
-+ .gpio = 42,
|
|
|
-+ },
|
|
|
-+ {
|
|
|
-+ .name = "iconnect:red:power",
|
|
|
-+ .gpio = 43,
|
|
|
-+ },
|
|
|
-+ {
|
|
|
-+ .name = "iconnect:blue:usb1",
|
|
|
-+ .gpio = 44,
|
|
|
-+ },
|
|
|
-+ {
|
|
|
-+ .name = "iconnect:blue:usb2",
|
|
|
-+ .gpio = 45,
|
|
|
-+ },
|
|
|
-+ {
|
|
|
-+ .name = "iconnect:blue:usb3",
|
|
|
-+ .gpio = 46,
|
|
|
-+ },
|
|
|
-+ {
|
|
|
-+ .name = "iconnect:blue:usb4",
|
|
|
-+ .gpio = 47,
|
|
|
-+ },
|
|
|
-+ {
|
|
|
-+ .name = "iconnect:blue:otb",
|
|
|
-+ .gpio = 48,
|
|
|
-+ },
|
|
|
-+};
|
|
|
-+
|
|
|
-+static struct gpio_led_platform_data iconnect_led_data = {
|
|
|
-+ .leds = iconnect_led_pins,
|
|
|
-+ .num_leds = ARRAY_SIZE(iconnect_led_pins),
|
|
|
-+};
|
|
|
-+
|
|
|
-+static struct platform_device iconnect_leds = {
|
|
|
-+ .name = "leds-gpio",
|
|
|
-+ .id = -1,
|
|
|
-+ .dev = {
|
|
|
-+ .platform_data = &iconnect_led_data,
|
|
|
-+ }
|
|
|
-+};
|
|
|
-+
|
|
|
-+#define ICONNECT_GPIO_KEY_RESET 12
|
|
|
-+#define ICONNECT_GPIO_KEY_OTB 35
|
|
|
-+
|
|
|
-+#define ICONNECT_SW_RESET 0x00
|
|
|
-+#define ICONNECT_SW_OTB 0x01
|
|
|
-+
|
|
|
-+static struct gpio_keys_button iconnect_buttons[] = {
|
|
|
-+ {
|
|
|
-+ .type = EV_SW,
|
|
|
-+ .code = ICONNECT_SW_RESET,
|
|
|
-+ .gpio = ICONNECT_GPIO_KEY_RESET,
|
|
|
-+ .desc = "Reset Button",
|
|
|
-+ .active_low = 1,
|
|
|
-+ .debounce_interval = 100,
|
|
|
-+ },
|
|
|
-+ {
|
|
|
-+ .type = EV_SW,
|
|
|
-+ .code = ICONNECT_SW_OTB,
|
|
|
-+ .gpio = ICONNECT_GPIO_KEY_OTB,
|
|
|
-+ .desc = "OTB Button",
|
|
|
-+ .active_low = 1,
|
|
|
-+ .debounce_interval = 100,
|
|
|
-+ },
|
|
|
-+};
|
|
|
-+
|
|
|
-+static struct gpio_keys_platform_data iconnect_button_data = {
|
|
|
-+ .buttons = iconnect_buttons,
|
|
|
-+ .nbuttons = ARRAY_SIZE(iconnect_buttons),
|
|
|
-+};
|
|
|
-+
|
|
|
-+static struct platform_device iconnect_button_device = {
|
|
|
-+ .name = "gpio-keys",
|
|
|
-+ .id = -1,
|
|
|
-+ .num_resources = 0,
|
|
|
-+ .dev = {
|
|
|
-+ .platform_data = &iconnect_button_data,
|
|
|
-+ },
|
|
|
-+};
|
|
|
-+
|
|
|
-+static unsigned int iconnect_mpp_config[] __initdata = {
|
|
|
-+ MPP12_GPIO, /*Input for reset button*/
|
|
|
-+ MPP35_GPIO, /*Input for OTB button*/
|
|
|
-+ MPP42_GPIO,
|
|
|
-+ MPP43_GPIO,
|
|
|
-+ MPP44_GPIO,
|
|
|
-+ MPP45_GPIO,
|
|
|
-+ MPP46_GPIO,
|
|
|
-+ MPP47_GPIO,
|
|
|
-+ MPP48_GPIO,
|
|
|
-+ 0
|
|
|
-+};
|
|
|
-+
|
|
|
-+static void __init iconnect_init(void)
|
|
|
-+{
|
|
|
-+ u32 dev, rev;
|
|
|
-+
|
|
|
-+ /*
|
|
|
-+ * Basic setup. Needs to be called early.
|
|
|
-+ */
|
|
|
-+ kirkwood_init();
|
|
|
-+ kirkwood_mpp_conf(iconnect_mpp_config);
|
|
|
-+
|
|
|
-+ kirkwood_nand_init(ARRAY_AND_SIZE(iconnect_nand_parts), 25);
|
|
|
-+ kirkwood_ehci_init();
|
|
|
-+
|
|
|
-+ kirkwood_ge00_init(&iconnect_ge00_data);
|
|
|
-+ kirkwood_pcie_id(&dev, &rev);
|
|
|
-+
|
|
|
-+ kirkwood_uart0_init();
|
|
|
-+ kirkwood_i2c_init();
|
|
|
-+
|
|
|
-+ platform_device_register(&iconnect_leds);
|
|
|
-+ platform_device_register(&iconnect_button_device);
|
|
|
-+}
|
|
|
-+
|
|
|
-+static int __init iconnect_pci_init(void)
|
|
|
-+{
|
|
|
-+ if (machine_is_iconnect())
|
|
|
-+ kirkwood_pcie_init(KW_PCIE0);
|
|
|
-+
|
|
|
-+ return 0;
|
|
|
-+}
|
|
|
-+subsys_initcall(iconnect_pci_init);
|
|
|
-+
|
|
|
-+
|
|
|
-+MACHINE_START(ICONNECT, "Iomega iConnect Wireless")
|
|
|
-+ .boot_params = 0x00000100,
|
|
|
-+ .init_machine = iconnect_init,
|
|
|
-+ .map_io = kirkwood_map_io,
|
|
|
-+ .init_irq = kirkwood_init_irq,
|
|
|
-+ .timer = &kirkwood_timer,
|
|
|
-+MACHINE_END
|
Gabor Juhos