Add the adam2 fritzbox flasher (#799)

SVN-Revision: 9966

scripts/adam2flash-fritzbox.pl

@@ -0,0 +1,209 @@
+#!/usr/bin/perl
+#
+#   D-Link DSL-G6x4T flash utility
+#
+#   Copyright (C) 2005 Felix Fietkau <[email protected]>
+#   based on fbox recovery util by Enrik Berkhan
+#
+#   This program is free software; you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation; either version 2 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program; if not, write to the Free Software
+#   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+#
+
+use IO::Socket::INET;
+use IO::Select;
+use Socket;
+use strict;
+use warnings;
+
+sub usage() {
+	print STDERR "Usage: $0 <ip> [firmware.bin]\n\n";
+	exit 0;
+}
+
+my $ip = shift @ARGV;
+$ip and $ip =~ /\d{1,3}\.\d{1,3}\.\d{1,3}\.\d{1,3}/ or usage();
+
+my $setip = unpack("N", inet_aton($ip));
+$setip > 0 or usage();
+
+my @packets;
+foreach my $ver ([18, 1], [22, 2]) {
+	push @packets, pack("vCCVNV", 0, @$ver, 1, $setip, 0);
+}
+print STDERR "Looking for device: ";
+my $scanning;
+my $box;
+
+my $probe = IO::Socket::INET->new(Proto => 'udp',
+                                  Broadcast => 1,
+                                  LocalAddr => $ip,
+                                  LocalPort => 5035) or die "socket: $!";
+my $sel = IO::Select->new($probe);
+my $packet = pack("vCCVNV", 0, 18, 1, 1, 0, 0);
+my $broadcast = sockaddr_in(5035, INADDR_BROADCAST);
+
+$probe->send($packet, 0, $broadcast);
+
+
+scan_again:
+print "Looking for Fritz!Box ";
+my @boxes = ();
+my $peer;
+$scanning = 100;
+print "o";
+while($scanning) {
+  my $reply;
+  my @ready;
+
+  if (@ready = $sel->can_read(0.2)) {
+    $peer = $probe->recv($reply, 16);
+    next if (length($reply) < 16);
+    my ($port, $addr) = sockaddr_in($peer);
+    my ($major, $minor1, $minor2, $code, $addr2) = unpack("vCCVV", $reply);
+    $addr2 = pack("N", $addr2);
+    if ($code == 2) {
+      print "O";
+      push @boxes, [$major, $minor1, $minor2, $addr, $addr2];
+      $scanning = 2 if ($scanning > 2);
+    }
+  } else {
+    $scanning--;
+    if (scalar @boxes == 0) {
+      $probe->send($packet, 0, $broadcast);
+      print "o";
+    } else {
+      print ".";
+    }
+  }
+}
+
+if (scalar @boxes == 0) {
+  print " none found, giving up.\n";
+  exit 1;
+} else {
+  print " found!\n";
+}
+
+{
+  package ADAM2FTP;
+  use base qw(Net::FTP);
+  # ADAM2 requires upper case commands, some brain dead firewall doesn't ;-)
+  sub _USER { shift->command("USER",@_)->response() }
+  sub _PASV { shift->command("P\@SW")->response() == Net::FTP::CMD_OK }
+  sub _GETENV {
+    my $ftp = shift;
+    my ($ok, $name, $value);
+
+    $ftp->command("GETENV",@_);
+    while(length($ok = $ftp->response()) < 1) {
+      my $line = $ftp->getline();
+      unless (defined($value)) {
+        chomp($line);
+        ($name, $value) = split(/\s+/, $line, 2);
+      }
+    }
+    $ftp->debug_print(0, "getenv: $value\n")
+      if $ftp->debug();
+    return $value;
+  }
+  sub getenv {
+    my $ftp = shift;
+    my $name = shift;
+    return $ftp->_GETENV($name);
+  }
+  sub _REBOOT { shift->command("REBOOT")->response() == Net::FTP::CMD_OK }
+  sub reboot {
+    my $ftp = shift;
+    $ftp->_REBOOT;
+    $ftp->close;
+  }
+  sub check {
+    my $ftp = shift;
+    
+    delete ${*$ftp}{'net_ftp_port'};
+    delete ${*$ftp}{'net_ftp_pasv'};
+
+    my $data = $ftp->_data_cmd('CHECK' ,@_) or return undef;
+    my $sum;
+    if (${${*$ftp}{'net_cmd_resp'}}[0] =~ /^Flash check 0x([0-9A-F]{8})/) {
+      $sum = hex($1);
+    }
+    $data->_close();
+    return $sum;
+  }
+}
+
+# passive mode geht mit Net::FTP nicht, connected zu spaet fuer ADAM2!
+my $ftp = ADAM2FTP->new($ip, Passive => 0, Debug => 0, Timeout => 600)
+  or die "can't FTP ADAM2";
+$ftp->login("adam2", "adam2") or die "can't login adam2";
+$ftp->binary();
+my $pid   = $ftp->getenv('ProductID');
+my $hwrev = $ftp->getenv('HWRevision');
+my $fwrev = $ftp->getenv('firmware_info');
+my $ulrev = $ftp->getenv('urlader-version');
+
+print "Product ID: $pid\n";
+print "Hardware Revision: $hwrev\n";
+print "Urlader  Revision: $ulrev\n";
+print "Firmware Revision: $fwrev\n";
+
+$ftp->hash(\*STDOUT, 64 * 1024);
+
+my $file = shift @ARGV;
+$file || exit 0;
+
+open FILE, "<$file" or die "can't open firmware file\n";
+
+my $mtd0 = $ftp->getenv("mtd0");
+my $mtd1 = $ftp->getenv("mtd1");
+my ($ksize, $fssize);
+
+$mtd1 =~ /^(0x\w+),(0x\w+)$/ and $ksize = hex($2) - hex($1);
+$mtd0 =~ /^(0x\w+),(0x\w+)$/ and $fssize = hex($2) - hex($1);
+$ksize and $fssize or die 'cannot read partition offsets';
+printf STDERR "Available flash space: 0x%08x (0x%08x + 0x%08x)\n", $ksize + $fssize, $ksize, $fssize;
+
+$ftp->command("MEDIA FLSH")->response();
+$ftp->binary();
+print STDERR "Writing to mtd1...\n";
+
+my $dc = $ftp->stor("fs mtd1");
+$dc or die "can't open data connection\n";
+my $rbytes = 1;
+
+while (($ksize > 0) and ($rbytes > 0)) {
+	my $buffer;
+	my $len = ($ksize > 1024 ? 1024 : $ksize);
+	$rbytes = read FILE, $buffer, $len;
+	$rbytes and $ksize -= $dc->write($buffer, $rbytes, 600);
+}
+
+$dc->close();
+$rbytes or die "no more data left to write\n";
+
+print STDERR "Writing to mtd0...\n";
+
+$dc = $ftp->stor("fs mtd0");
+$dc or die "can't open data connection\n";
+
+while (($fssize > 0) and ($rbytes > 0)) {
+	my $buffer;
+	my $len = ($fssize > 1024 ? 1024 : $fssize);
+	$rbytes = read FILE, $buffer, $len;
+	$rbytes and $fssize -= $dc->write($buffer, $rbytes, 600);
+}
+
+$dc->close();
+$ftp->reboot();