ramips: use D-Link DIR-600 B1 image for B2 version

Everything set for the B1 is identical to the values uses for the B2
version.

Signed-off-by: Mathias Kresin <[email protected]>

target/linux/ramips/base-files/etc/board.d/01_leds

@@ -122,7 +122,6 @@ dcs-930l-b1)
 	;;
 dir-300-b1|\
 dir-600-b1|\
-dir-600-b2|\
 dir-620-a1)
 	ucidef_set_led_default "wan" "WAN LED (amber)" "$board:amber:wan" "1"
 	set_wifi_led "rt2800pci-phy0::radio"

target/linux/ramips/base-files/etc/diag.sh

@@ -63,7 +63,6 @@ get_status_led() {
 	dir-300-b7|\
 	dir-320-b1|\
 	dir-600-b1|\
-	dir-600-b2|\
 	dir-610-a1|\
 	dir-615-d|\
 	dir-615-h1|\

target/linux/ramips/base-files/lib/ramips.sh

@@ -133,9 +133,6 @@ ramips_board_detect() {
 	*"DIR-600 B1")
 		name="dir-600-b1"
 		;;
-	*"DIR-600 B2")
-		name="dir-600-b2"
-		;;
 	*"DIR-610 A1")
 		name="dir-610-a1"
 		;;

target/linux/ramips/base-files/lib/upgrade/platform.sh

@@ -43,7 +43,6 @@ platform_check_image() {
 	dir-300-b7|\
 	dir-320-b1|\
 	dir-600-b1|\
-	dir-600-b2|\
 	dir-615-d|\
 	dir-615-h1|\
 	dir-620-a1|\

target/linux/ramips/dts/DIR-600-B2.dts

@@ -1,107 +0,0 @@
-/dts-v1/;
-
-#include "rt3050.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-	compatible = "DIR-600-B2", "ralink,rt3050-soc";
-	model = "D-Link DIR-600 B2";
-
-	cfi@1f000000 {
-		compatible = "cfi-flash";
-		reg = <0x1f000000 0x800000>;
-		bank-width = <2>;
-		device-width = <2>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		partition@0 {
-			label = "u-boot";
-			reg = <0x0 0x30000>;
-			read-only;
-		};
-
-		devdata: partition@30000 {
-			label = "devdata";
-			reg = <0x30000 0x10000>;
-			read-only;
-		};
-
-		partition@40000 {
-			label = "devconf";
-			reg = <0x40000 0x10000>;
-			read-only;
-		};
-
-		partition@50000 {
-			label = "firmware";
-			reg = <0x50000 0x3b0000>;
-		};
-	};
-
-	gpio-keys-polled {
-		compatible = "gpio-keys-polled";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		poll-interval = <20>;
-
-		reset {
-			label = "reset";
-			gpios = <&gpio0 10 1>;
-			linux,code = <KEY_RESTART>;
-		};
-
-		wps {
-			label = "wps";
-			gpios = <&gpio0 0 1>;
-			linux,code = <KEY_WPS_BUTTON>;
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-
-		status {
-			label = "dir-600-b2:amber:status";
-			gpios = <&gpio0 8 1>;
-		};
-
-		status2 {
-			label = "dir-600-b2:green:status";
-			gpios = <&gpio0 9 1>;
-		};
-
-		wan {
-			label = "dir-600-b2:amber:wan";
-			gpios = <&gpio0 14 1>;
-		};
-
-		wan2 {
-			label = "dir-600-b2:green:wan";
-			gpios = <&gpio0 12 1>;
-		};
-
-		wps {
-			label = "dir-600-b2:blue:wps";
-			gpios = <&gpio0 13 1>;
-		};
-	};
-};
-
-&pinctrl {
-	state_default: pinctrl0 {
-		gpio {
-			ralink,group = "i2c", "spi", "jtag", "mdio", "rgmii", "uartf";
-			ralink,function = "gpio";
-		};
-	};
-};
-
-&esw {
-	mediatek,portmap = <0x2f>;
-};
-
-&wmac {
-	ralink,mtd-eeprom = <&devdata 0x4000>;
-};

target/linux/ramips/image/rt305x-legacy.mk

@@ -157,7 +157,6 @@ Image/Build/Profile/JHR-N825R=$(call BuildFirmware/JCG/$(1),$(1),jhr-n825r,JHR-N
 Image/Build/Profile/JHR-N926R=$(call BuildFirmware/JCG/$(1),$(1),jhr-n926r,JHR-N926R,25.24)
 Image/Build/Profile/DIR-300-B1=$(call BuildFirmware/DIR300B1/$(1),$(1),dir-300-b1,DIR-300-B1,wrgn23_dlwbr_dir300b)
 Image/Build/Profile/DIR-600-B1=$(call BuildFirmware/DIR300B1/$(1),$(1),dir-600-b1,DIR-600-B1,wrgn23_dlwbr_dir600b)
-Image/Build/Profile/DIR-600-B2=$(call BuildFirmware/DIR300B1/$(1),$(1),dir-600-b2,DIR-600-B2,wrgn23_dlwbr_dir600b)
 Image/Build/Profile/DIR-615-D=$(call BuildFirmware/DIR300B1/$(1),$(1),dir-615-d,DIR-615-D,wrgn23_dlwbr_dir615d)
 Image/Build/Profile/DAP1350=$(call BuildFirmware/dap1350/$(1),$(1),dap-1350,DAP-1350,RT3052-AP-DAP1350-3)
 Image/Build/Profile/DAP1350WW=$(call BuildFirmware/dap1350/$(1),$(1),dap-1350WW,DAP-1350,RT3052-AP-DAP1350WW-3)
@@ -289,17 +288,11 @@ LEGACY_DEVICES += DIR-300-B1
 
 
 define LegacyDevice/DIR-600-B1
-  DEVICE_TITLE := D-Link DIR-600 B1
+  DEVICE_TITLE := D-Link DIR-600 B1/B2
 endef
 LEGACY_DEVICES += DIR-600-B1
 
 
-define LegacyDevice/DIR-600-B2
-  DEVICE_TITLE := D-Link DIR-600 B2
-endef
-LEGACY_DEVICES += DIR-600-B2
-
-
 define LegacyDevice/DIR-615-D
   DEVICE_TITLE := D-Link DIR-615 D
 endef