bcm53xx: sync NVRAM and SPROM drivers with upstream version

Signed-off-by: Rafał Miłecki <[email protected]>

SVN-Revision: 45678

target/linux/bcm53xx/files/drivers/firmware/broadcom/bcm47xx_nvram.c

@@ -98,7 +98,7 @@ found:
 		pr_err("The nvram size accoridng to the header seems to be bigger than the partition on flash\n");
 	if (header->len > NVRAM_SPACE)
 		pr_err("nvram on flash (%i bytes) is bigger than the reserved space in memory, will just copy the first %i bytes\n",
-		       header->len, NVRAM_SPACE);
+		       header->len, NVRAM_SPACE - 1);
 
 	src = (u32 *)header;
 	dst = (u32 *)nvram_buf;
@@ -106,6 +106,7 @@ found:
 		*dst++ = __raw_readl(src++);
 	for (; i < header->len && i < NVRAM_SPACE && i < size; i += 4)
 		*dst++ = readl(src++);
+	nvram_buf[NVRAM_SPACE - 1] = '\0';
 
 	return 0;
 }
@@ -150,10 +151,10 @@ static int nvram_init(void)
 		u8 *dst = (uint8_t *)nvram_buf;
 		size_t len = header.len;
 
-		if (header.len > NVRAM_SPACE) {
+		if (len >= NVRAM_SPACE) {
+			len = NVRAM_SPACE - 1;
 			pr_err("nvram on flash (%i bytes) is bigger than the reserved space in memory, will just copy the first %i bytes\n",
-				header.len, NVRAM_SPACE);
-			len = NVRAM_SPACE;
+				header.len, len);
 		}
 
 		err = mtd_read(mtd, 0, len, &bytes_read, dst);
@@ -170,7 +171,7 @@ static int nvram_init(void)
 int bcm47xx_nvram_getenv(const char *name, char *val, size_t val_len)
 {
 	char *var, *value, *end, *eq;
-	int data_left, err;
+	int err;
 
 	if (!name)
 		return -EINVAL;
@@ -183,19 +184,16 @@ int bcm47xx_nvram_getenv(const char *name, char *val, size_t val_len)
 
 	/* Look for name=value and return value */
 	var = &nvram_buf[sizeof(struct nvram_header)];
-	end = nvram_buf + sizeof(nvram_buf) - 2;
-	end[0] = '\0';
-	end[1] = '\0';
-	for (; *var; var = value + strlen(value) + 1) {
-		data_left = end - var;
-
-		eq = strnchr(var, data_left, '=');
+	end = nvram_buf + sizeof(nvram_buf);
+	while (var < end && *var) {
+		eq = strchr(var, '=');
 		if (!eq)
 			break;
 		value = eq + 1;
 		if (eq - var == strlen(name) &&
 		    strncmp(var, name, eq - var) == 0)
 			return snprintf(val, val_len, "%s", value);
+		var = value + strlen(value) + 1;
 	}
 	return -ENOENT;
 }

target/linux/bcm53xx/files/drivers/misc/bcm47xx-sprom.c

@@ -212,6 +212,9 @@ static void bcm47xx_sprom_fill_auto(struct ssb_sprom *sprom,
 	bool fb = fallback;
 
 	ENTRY(0xfffffffe, u16, pre, "boardrev", board_rev, 0, true);
+	ENTRY(0xfffffffe, u32, pre, "boardflags", boardflags, 0, fb);
+	ENTRY(0xfffffff0, u32, pre, "boardflags2", boardflags2, 0, fb);
+	ENTRY(0xfffff800, u32, pre, "boardflags3", boardflags3, 0, fb);
 	ENTRY(0x00000002, u16, pre, "boardflags", boardflags_lo, 0, fb);
 	ENTRY(0xfffffffc, u16, pre, "boardtype", board_type, 0, true);
 	ENTRY(0xfffffffe, u16, pre, "boardnum", board_num, 0, fb);
@@ -539,6 +542,8 @@ static int mac_addr_used = 2;
 static void bcm47xx_fill_sprom_ethernet(struct ssb_sprom *sprom,
 					const char *prefix, bool fallback)
 {
+	bool fb = fallback;
+
 	nvram_read_macaddr(prefix, "et0macaddr", sprom->et0mac, fallback);
 	nvram_read_u8(prefix, NULL, "et0mdcport", &sprom->et0mdcport, 0,
 		      fallback);
@@ -551,6 +556,10 @@ static void bcm47xx_fill_sprom_ethernet(struct ssb_sprom *sprom,
 	nvram_read_u8(prefix, NULL, "et1phyaddr", &sprom->et1phyaddr, 0,
 		      fallback);
 
+	nvram_read_macaddr(prefix, "et2macaddr", sprom->et2mac, fb);
+	nvram_read_u8(prefix, NULL, "et2mdcport", &sprom->et2mdcport, 0, fb);
+	nvram_read_u8(prefix, NULL, "et2phyaddr", &sprom->et2phyaddr, 0, fb);
+
 	nvram_read_macaddr(prefix, "macaddr", sprom->il0mac, fallback);
 	nvram_read_macaddr(prefix, "il0macaddr", sprom->il0mac, fallback);
 
@@ -629,6 +638,13 @@ void bcm47xx_fill_sprom(struct ssb_sprom *sprom, const char *prefix,
 	bcm47xx_sprom_fill_auto(sprom, prefix, fallback);
 }
 
+/*
+ * Having many NVRAM entries for PCI devices led to repeating prefixes like
+ * pci/1/1/ all the time and wasting flash space. So at some point Broadcom
+ * decided to introduce prefixes like 0: 1: 2: etc.
+ * If we find e.g. devpath0=pci/2/1 or devpath0=pci/2/1/ we should use 0:
+ * instead of pci/2/1/.
+ */
 static void bcm47xx_sprom_apply_prefix_alias(char *prefix, size_t prefix_size)
 {
 	size_t prefix_len = strlen(prefix);
@@ -637,10 +653,8 @@ static void bcm47xx_sprom_apply_prefix_alias(char *prefix, size_t prefix_size)
 	char buf[20];
 	int i;
 
-	if (prefix_len <= 0 || prefix[prefix_len - 1] != '/') {
-		pr_warn("Invalid prefix: \"%s\"\n", prefix);
+	if (prefix_len <= 0 || prefix[prefix_len - 1] != '/')
 		return;
-	}
 
 	for (i = 0; i < 3; i++) {
 		if (snprintf(nvram_var, sizeof(nvram_var), "devpath%d", i) <= 0)