bcm53xx: backport BCM5301X earlycon and USB VCC patches

Signed-off-by: Rafał Miłecki <[email protected]>

SVN-Revision: 49166

target/linux/bcm53xx/patches-4.4/130-ARM-BCM5301X-Add-DT-for-D-Link-DIR-885L.patch → target/linux/bcm53xx/patches-4.4/034-ARM-BCM5301X-Add-DT-for-D-Link-DIR-885L.patch

@@ -14,10 +14,6 @@ standard stuff like LEDs, buttons and UART.
 Signed-off-by: Rafał Miłecki <[email protected]>
 Signed-off-by: Florian Fainelli <[email protected]>
 ---
- arch/arm/boot/dts/Makefile                    |   1 +
- arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts | 111 ++++++++++++++++++++++++++
- 2 files changed, 112 insertions(+)
- create mode 100644 arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
 
 --- a/arch/arm/boot/dts/Makefile
 +++ b/arch/arm/boot/dts/Makefile

target/linux/bcm53xx/patches-4.4/035-ARM-BCM5301X-Set-vcc-gpio-for-USB-controllers-of-few.patch

@@ -0,0 +1,117 @@
+From dd70ccfaa79189feaa78609d44f7c3e7fa1dc6ff Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <[email protected]>
+Date: Wed, 23 Mar 2016 16:52:47 +0100
+Subject: [PATCH] ARM: BCM5301X: Set vcc-gpio for USB controllers of few
+ devices
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+There are few devices that have USB power controlled using GPIO. Linux
+USB host driver (bcma-hcd) already supports this by reading vcc-gpio
+from DT. Set it properly for all known devices.
+
+Signed-off-by: Rafał Miłecki <[email protected]>
+Signed-off-by: Florian Fainelli <[email protected]>
+---
+
+--- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
++++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
+@@ -139,3 +139,11 @@
+ &uart0 {
+ 	status = "okay";
+ };
++
++&usb2 {
++	vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
++};
++
++&usb3 {
++	vcc-gpio = <&chipcommon 10 GPIO_ACTIVE_LOW>;
++};
+--- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
++++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
+@@ -24,17 +24,6 @@
+ 		reg = <0x00000000 0x08000000>;
+ 	};
+ 
+-	axi@18000000 {
+-		usb3@23000 {
+-			reg = <0x00023000 0x1000>;
+-
+-			#address-cells = <1>;
+-			#size-cells = <1>;
+-
+-			vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
+-		};
+-	};
+-
+ 	leds {
+ 		compatible = "gpio-leds";
+ 
+@@ -97,3 +86,7 @@
+ &uart0 {
+ 	status = "okay";
+ };
++
++&usb3 {
++	vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
++};
+--- a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
++++ b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
+@@ -126,3 +126,8 @@
+ 		};
+ 	};
+ };
++
++
++&usb2 {
++	vcc-gpio = <&chipcommon 13 GPIO_ACTIVE_HIGH>;
++};
+--- a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
++++ b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
+@@ -106,3 +106,11 @@
+ 		};
+ 	};
+ };
++
++&usb2 {
++	vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
++};
++
++&usb3 {
++	vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
++};
+--- a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
++++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
+@@ -109,3 +109,7 @@
+ 	status = "okay";
+ 	clock-frequency = <125000000>;
+ };
++
++&usb3 {
++	vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
++};
+--- a/arch/arm/boot/dts/bcm5301x.dtsi
++++ b/arch/arm/boot/dts/bcm5301x.dtsi
+@@ -207,6 +207,20 @@
+ 			gpio-controller;
+ 			#gpio-cells = <2>;
+ 		};
++
++		usb2: usb2@21000 {
++			reg = <0x00021000 0x1000>;
++
++			#address-cells = <1>;
++			#size-cells = <1>;
++		};
++
++		usb3: usb3@23000 {
++			reg = <0x00023000 0x1000>;
++
++			#address-cells = <1>;
++			#size-cells = <1>;
++		};
+ 	};
+ 
+ 	lcpll0: lcpll0@1800c100 {

target/linux/bcm53xx/patches-4.4/036-ARM-BCM5301X-Enable-earlycon-on-tested-devices.patch

@@ -0,0 +1,95 @@
+From 5a6516ff135555aa53c7d156cd3973b826e011f9 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <[email protected]>
+Date: Wed, 6 Apr 2016 18:49:55 +0200
+Subject: [PATCH] ARM: BCM5301X: Enable earlycon on tested devices
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+This allows reporting & debugging problems occurring early in the boot
+process.
+
+Signed-off-by: Rafał Miłecki <[email protected]>
+Acked-by: Hauke Mehrtens <[email protected]>
+Signed-off-by: Florian Fainelli <[email protected]>
+---
+
+--- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
++++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
+@@ -17,7 +17,7 @@
+ 	model = "Buffalo WZR-1750DHP (BCM4708)";
+ 
+ 	chosen {
+-		bootargs = "console=ttyS0,115200";
++		bootargs = "console=ttyS0,115200 earlycon";
+ 	};
+ 
+ 	memory {
+--- a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
++++ b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
+@@ -17,7 +17,7 @@
+ 	model = "Luxul XWC-1000 (BCM4708)";
+ 
+ 	chosen {
+-		bootargs = "console=ttyS0,115200";
++		bootargs = "console=ttyS0,115200 earlycon";
+ 	};
+ 
+ 	memory {
+--- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
++++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
+@@ -17,7 +17,7 @@
+ 	model = "Netgear R6250 V1 (BCM4708)";
+ 
+ 	chosen {
+-		bootargs = "console=ttyS0,115200";
++		bootargs = "console=ttyS0,115200 earlycon";
+ 	};
+ 
+ 	memory {
+--- a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
++++ b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
+@@ -17,7 +17,7 @@
+ 	model = "SmartRG SR400ac";
+ 
+ 	chosen {
+-		bootargs = "console=ttyS0,115200";
++		bootargs = "console=ttyS0,115200 earlycon";
+ 	};
+ 
+ 	memory {
+--- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
++++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
+@@ -17,7 +17,7 @@
+ 	model = "Buffalo WZR-600DHP2 (BCM47081)";
+ 
+ 	chosen {
+-		bootargs = "console=ttyS0,115200";
++		bootargs = "console=ttyS0,115200 earlycon";
+ 	};
+ 
+ 	memory {
+--- a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
++++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
+@@ -17,7 +17,7 @@
+ 	model = "D-Link DIR-885L";
+ 
+ 	chosen {
+-		bootargs = "console=ttyS0,115200";
++		bootargs = "console=ttyS0,115200 earlycon";
+ 	};
+ 
+ 	memory {
+--- a/arch/arm/boot/dts/bcm5301x.dtsi
++++ b/arch/arm/boot/dts/bcm5301x.dtsi
+@@ -18,6 +18,10 @@
+ / {
+ 	interrupt-parent = <&gic>;
+ 
++	chosen {
++		stdout-path = &uart0;
++	};
++
+ 	chipcommonA {
+ 		compatible = "simple-bus";
+ 		ranges = <0x00000000 0x18000000 0x00001000>;

target/linux/bcm53xx/patches-4.4/321-ARM-BCM5301X-Set-vcc-gpio-for-USB-controllers.patch

@@ -1,86 +0,0 @@
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <[email protected]>
-Subject: [PATCH] ARM: BCM5301X: Set vcc-gpio for USB controllers
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Signed-off-by: Rafał Miłecki <[email protected]>
----
---- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
-+++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
-@@ -24,6 +24,26 @@
- 		reg = <0x00000000 0x08000000>;
- 	};
- 
-+	axi@18000000 {
-+		usb2@21000 {
-+			reg = <0x00021000 0x1000>;
-+
-+			#address-cells = <1>;
-+			#size-cells = <1>;
-+
-+			vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
-+		};
-+
-+		usb3@23000 {
-+			reg = <0x00023000 0x1000>;
-+
-+			#address-cells = <1>;
-+			#size-cells = <1>;
-+
-+			vcc-gpio = <&chipcommon 10 GPIO_ACTIVE_LOW>;
-+		};
-+	};
-+
- 	spi {
- 		compatible = "spi-gpio";
- 		num-chipselects = <1>;
---- a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
-+++ b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
-@@ -24,6 +24,26 @@
- 		reg = <0x00000000 0x08000000>;
- 	};
- 
-+	axi@18000000 {
-+		usb2@21000 {
-+			reg = <0x00021000 0x1000>;
-+
-+			#address-cells = <1>;
-+			#size-cells = <1>;
-+
-+			vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
-+		};
-+
-+		usb3@23000 {
-+			reg = <0x00023000 0x1000>;
-+
-+			#address-cells = <1>;
-+			#size-cells = <1>;
-+
-+			vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
-+		};
-+	};
-+
- 	leds {
- 		compatible = "gpio-leds";
- 
---- a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
-+++ b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
-@@ -24,6 +24,17 @@
- 		reg = <0x00000000 0x08000000>;
- 	};
- 
-+	axi@18000000 {
-+		usb2@21000 {
-+			reg = <0x00021000 0x1000>;
-+
-+			#address-cells = <1>;
-+			#size-cells = <1>;
-+
-+			vcc-gpio = <&chipcommon 13 GPIO_ACTIVE_HIGH>;
-+		};
-+	};
-+
- 	leds {
- 		compatible = "gpio-leds";
- 

target/linux/bcm53xx/patches-4.4/330-ARM-BCM5301X-Enable-earlyprintk-on-tested-devices.patch

@@ -1,192 +0,0 @@
-From eb1075cc48d3c315c7403822c33da9588ab76492 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <[email protected]>
-Date: Wed, 14 Jan 2015 08:33:25 +0100
-Subject: [PATCH] ARM: BCM5301X: Enable earlyprintk on tested devices
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Signed-off-by: Rafał Miłecki <[email protected]>
----
- arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts  | 2 +-
- arch/arm/boot/dts/bcm4708-netgear-r6250.dts        | 2 +-
- arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts        | 2 +-
- arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts | 2 +-
- 4 files changed, 4 insertions(+), 4 deletions(-)
-
---- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
-+++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
-@@ -17,7 +17,7 @@
- 	model = "Buffalo WZR-1750DHP (BCM4708)";
- 
- 	chosen {
--		bootargs = "console=ttyS0,115200";
-+		bootargs = "console=ttyS0,115200 earlyprintk";
- 	};
- 
- 	memory {
---- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
-+++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
-@@ -17,7 +17,7 @@
- 	model = "Netgear R6250 V1 (BCM4708)";
- 
- 	chosen {
--		bootargs = "console=ttyS0,115200";
-+		bootargs = "console=ttyS0,115200 earlyprintk";
- 	};
- 
- 	memory {
---- a/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts
-+++ b/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts
-@@ -17,7 +17,7 @@
- 	model = "Asus RT-N18U (BCM47081)";
- 
- 	chosen {
--		bootargs = "console=ttyS0,115200";
-+		bootargs = "console=ttyS0,115200 earlyprintk";
- 	};
- 
- 	memory {
---- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
-+++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
-@@ -17,7 +17,7 @@
- 	model = "Buffalo WZR-600DHP2 (BCM47081)";
- 
- 	chosen {
--		bootargs = "console=ttyS0,115200";
-+		bootargs = "console=ttyS0,115200 earlyprintk";
- 	};
- 
- 	memory {
---- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
-+++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
-@@ -17,7 +17,7 @@
- 	model = "Buffalo WZR-900DHP (BCM47081)";
- 
- 	chosen {
--		bootargs = "console=ttyS0,115200";
-+		bootargs = "console=ttyS0,115200 earlyprintk";
- 	};
- 
- 	memory {
---- a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
-+++ b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
-@@ -17,7 +17,7 @@
- 	model = "Netgear R8000 (BCM4709)";
- 
- 	chosen {
--		bootargs = "console=ttyS0,115200";
-+		bootargs = "console=ttyS0,115200 earlyprintk";
- 	};
- 
- 	memory {
---- a/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts
-+++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts
-@@ -17,7 +17,7 @@
- 	model = "Asus RT-AC56U (BCM4708)";
- 
- 	chosen {
--		bootargs = "console=ttyS0,115200";
-+		bootargs = "console=ttyS0,115200 earlyprintk";
- 	};
- 
- 	memory {
---- a/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts
-+++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts
-@@ -17,7 +17,7 @@
- 	model = "Asus RT-AC68U (BCM4708)";
- 
- 	chosen {
--		bootargs = "console=ttyS0,115200";
-+		bootargs = "console=ttyS0,115200 earlyprintk";
- 	};
- 
- 	memory {
---- a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
-+++ b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
-@@ -17,7 +17,7 @@
- 	model = "Luxul XWC-1000 (BCM4708)";
- 
- 	chosen {
--		bootargs = "console=ttyS0,115200";
-+		bootargs = "console=ttyS0,115200 earlyprintk";
- 	};
- 
- 	memory {
---- a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
-+++ b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
-@@ -17,7 +17,7 @@
- 	model = "Buffalo WXR-1900DHP";
- 
- 	chosen {
--		bootargs = "console=ttyS0,115200";
-+		bootargs = "console=ttyS0,115200 earlyprintk";
- 	};
- 
- 	memory {
---- a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
-+++ b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
-@@ -17,7 +17,7 @@
- 	model = "SmartRG SR400ac";
- 
- 	chosen {
--		bootargs = "console=ttyS0,115200";
-+		bootargs = "console=ttyS0,115200 earlyprintk";
- 	};
- 
- 	memory {
---- a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
-+++ b/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
-@@ -17,7 +17,7 @@
- 	model = "Asus RT-AC87U";
- 
- 	chosen {
--		bootargs = "console=ttyS0,115200";
-+		bootargs = "console=ttyS0,115200 earlyprintk";
- 	};
- 
- 	memory {
---- a/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
-+++ b/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
-@@ -17,7 +17,7 @@
- 	model = "Netgear R7000";
- 
- 	chosen {
--		bootargs = "console=ttyS0,115200";
-+		bootargs = "console=ttyS0,115200 earlyprintk";
- 	};
- 
- 	memory {
---- a/arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts
-+++ b/arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts
-@@ -17,7 +17,7 @@
- 	model = "Linksys EA6300 V1";
- 
- 	chosen {
--		bootargs = "console=ttyS0,115200";
-+		bootargs = "console=ttyS0,115200 earlyprintk";
- 	};
- 
- 	memory {
---- a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
-+++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
-@@ -17,7 +17,7 @@
- 	model = "D-Link DIR-885L";
- 
- 	chosen {
--		bootargs = "console=ttyS0,115200";
-+		bootargs = "console=ttyS0,115200 earlyprintk";
- 	};
- 
- 	memory {
---- a/arch/arm/boot/dts/bcm47094-netgear-r8500.dts
-+++ b/arch/arm/boot/dts/bcm47094-netgear-r8500.dts
-@@ -17,7 +17,7 @@
- 	model = "Netgear R8500";
- 
- 	chosen {
--		bootargs = "console=ttyS0,115200";
-+		bootargs = "console=ttyS0,115200 earlyprintk";
- 	};
- 
- 	memory {

target/linux/bcm53xx/patches-4.4/331-ARM-BCM5301X-Specify-RAM-on-devices-by-including-HIG.patch

@@ -26,7 +26,7 @@ Signed-off-by: Rafał Miłecki <[email protected]>
 +		       0x88000000 0x18000000>;
  	};
  
- 	axi@18000000 {
+ 	spi {
 --- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
 +++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
 @@ -21,7 +21,8 @@
@@ -38,7 +38,7 @@ Signed-off-by: Rafał Miłecki <[email protected]>
 +		       0x88000000 0x08000000>;
  	};
  
- 	axi@18000000 {
+ 	leds {
 --- a/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
 +++ b/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
 @@ -21,7 +21,8 @@
@@ -98,7 +98,7 @@ Signed-off-by: Rafał Miłecki <[email protected]>
 +		       0x88000000 0x08000000>;
  	};
  
- 	axi@18000000 {
+ 	leds {
 --- a/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts
 +++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts
 @@ -21,7 +21,8 @@
@@ -134,7 +134,7 @@ Signed-off-by: Rafał Miłecki <[email protected]>
 +		       0x88000000 0x18000000>;
  	};
  
- 	axi@18000000 {
+ 	leds {
 --- a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
 +++ b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
 @@ -21,7 +21,8 @@

target/linux/bcm53xx/patches-4.4/332-ARM-BCM5301X-Add-power-button-for-Buffalo-WZR-1750DHP.patch

@@ -5,7 +5,7 @@ Signed-off-by: Felix Fietkau <[email protected]>
 ---
 --- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
 +++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
-@@ -123,6 +123,12 @@
+@@ -103,6 +103,12 @@
  		#address-cells = <1>;
  		#size-cells = <0>;
  

target/linux/bcm53xx/patches-4.4/351-ARM-BCM5301X-Enable-ChipCommon-UART-on-untested-devi.patch

@@ -81,26 +81,31 @@ Signed-off-by: Rafał Miłecki <[email protected]>
 +};
 --- a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
 +++ b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
-@@ -138,3 +138,8 @@
- 		};
+@@ -128,6 +128,10 @@
  	};
  };
-+
+ 
 +&uart0 {
 +	status = "okay";
 +	clock-frequency = <125000000>;
 +};
+ 
+ &usb2 {
+ 	vcc-gpio = <&chipcommon 13 GPIO_ACTIVE_HIGH>;
 --- a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
 +++ b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
-@@ -127,3 +127,8 @@
- 		};
+@@ -108,6 +108,11 @@
  	};
  };
-+
+ 
 +&uart0 {
 +	status = "okay";
 +	clock-frequency = <125000000>;
 +};
++
+ &usb2 {
+ 	vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
+ };
 --- a/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
 +++ b/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
 @@ -104,4 +104,5 @@