ramips: ethernet: ralink: add struct fe_priv as context to fe_reset()

The fe_reset function direct access the reset controller instead
using the reset controller api. In preparation to use the
reset controller.

Signed-off-by: Alexander Couzens <[email protected]>

target/linux/ramips/files/drivers/net/ethernet/ralink/mtk_eth_soc.c

@@ -1360,7 +1360,7 @@ static int __init fe_init(struct net_device *dev)
 	const char *mac_addr;
 	int err;
 
-	priv->soc->reset_fe();
+	priv->soc->reset_fe(priv);
 
 	if (priv->soc->switch_init)
 		if (priv->soc->switch_init(priv)) {

target/linux/ramips/files/drivers/net/ethernet/ralink/mtk_eth_soc.h

@@ -382,7 +382,7 @@ struct fe_soc_data {
 	const u16 *reg_table;
 
 	void (*init_data)(struct fe_soc_data *data, struct net_device *netdev);
-	void (*reset_fe)(void);
+	void (*reset_fe)(struct fe_priv *priv);
 	void (*set_mac)(struct fe_priv *priv, unsigned char *mac);
 	int (*fwd_config)(struct fe_priv *priv);
 	void (*tx_dma)(struct fe_tx_dma *txd);

target/linux/ramips/files/drivers/net/ethernet/ralink/soc_mt7620.c

@@ -294,7 +294,7 @@ static void mt7620_port_init(struct fe_priv *priv, struct device_node *np)
 	}
 }
 
-static void mt7620_fe_reset(void)
+static void mt7620_fe_reset(struct fe_priv *priv)
 {
 	fe_reset(MT7620A_RESET_FE | MT7620A_RESET_ESW);
 }

target/linux/ramips/files/drivers/net/ethernet/ralink/soc_rt2880.c

@@ -33,7 +33,7 @@ static void rt2880_init_data(struct fe_soc_data *data,
 	/* netdev->hw_features |= NETIF_F_IP_CSUM | NETIF_F_RXCSUM; */
 }
 
-void rt2880_fe_reset(void)
+void rt2880_fe_reset(struct fe_priv *priv)
 {
 	fe_reset(RT2880_RESET_FE);
 }

target/linux/ramips/files/drivers/net/ethernet/ralink/soc_rt3050.c

@@ -69,7 +69,7 @@ static int rt3050_fwd_config(struct fe_priv *priv)
 	return 0;
 }
 
-static void rt305x_fe_reset(void)
+static void rt305x_fe_reset(struct fe_priv *priv)
 {
 	fe_reset(RT305X_RESET_FE);
 }
@@ -120,7 +120,7 @@ static void rt5350_tx_dma(struct fe_tx_dma *txd)
 	txd->txd4 = 0;
 }
 
-static void rt5350_fe_reset(void)
+static void rt5350_fe_reset(struct fe_priv *priv)
 {
 	fe_reset(RT305X_RESET_FE | RT305X_RESET_ESW);
 }

target/linux/ramips/files/drivers/net/ethernet/ralink/soc_rt3883.c

@@ -21,7 +21,7 @@
 
 #define RT3883_RSTCTRL_FE		BIT(21)
 
-static void rt3883_fe_reset(void)
+static void rt3883_fe_reset(struct fe_priv *priv)
 {
 	fe_reset(RT3883_RSTCTRL_FE);
 }