hostapd: update to git snapshot of 2018-04-09

And import patchset to allow 802.11s mesh on DFS channels, see also
http://lists.infradead.org/pipermail/hostap/2018-April/038418.html
Fix sae_password for encryption mesh (sent upstream as well).
Also refreshed existing patches and fixed 463-add-mcast_rate-to-11s.

Signed-off-by: Daniel Golle <[email protected]>

package/network/services/hostapd/Makefile

@@ -11,9 +11,9 @@ PKG_RELEASE:=1
 
 PKG_SOURCE_URL:=http://w1.fi/hostap.git
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_DATE:=2018-03-26
-PKG_SOURCE_VERSION:=64624f31cf81dc6164462fa153ee7a5909e21183
-PKG_MIRROR_HASH:=2c9e2548b1e6bbafe1b4e545543999b587bbd31a85eba69d54ffced8d7394f30
+PKG_SOURCE_DATE:=2018-04-09
+PKG_SOURCE_VERSION:=fa617ee6a0b2d39e6372c93ef9437caa3bd9065a
+PKG_MIRROR_HASH:=5e6f20153c3405ac905f89fea8a614a57e9ba19583b2de2777179381a74aa7b1
 
 PKG_MAINTAINER:=Felix Fietkau <[email protected]>
 PKG_LICENSE:=BSD-3-Clause

package/network/services/hostapd/patches/0101-mesh-factor-out-mesh-join-function.patch

@@ -0,0 +1,219 @@
+From 91c0f3f6a9ecae3c9106bef8a8606fab0792dd28 Mon Sep 17 00:00:00 2001
+From: Peter Oh <[email protected]>
+Date: Thu, 12 Apr 2018 02:48:58 -0700
+Subject: [PATCH 01/15] mesh: factor out mesh join function
+
+mesh join function consitss of 2 parts which are preparing
+configurations and sending join event to driver.
+Since physical mesh join event could happen either right
+after mesh configuration is done or after CAC is done
+in case of DFS channel is used, factor out the function
+into 2 parts to reduce redundant calls.
+
+Signed-off-by: Peter Oh <[email protected]>
+---
+ wpa_supplicant/mesh.c             | 120 ++++++++++++++++--------------
+ wpa_supplicant/mesh.h             |   1 +
+ wpa_supplicant/wpa_supplicant_i.h |   1 +
+ 3 files changed, 68 insertions(+), 54 deletions(-)
+
+--- a/wpa_supplicant/mesh.c
++++ b/wpa_supplicant/mesh.c
+@@ -25,6 +25,7 @@
+ #include "mesh_mpm.h"
+ #include "mesh_rsn.h"
+ #include "mesh.h"
++#include "drivers/driver_nl80211.h"
+ 
+ 
+ static void wpa_supplicant_mesh_deinit(struct wpa_supplicant *wpa_s)
+@@ -359,13 +360,48 @@ void wpa_supplicant_mesh_add_scan_ie(str
+ }
+ 
+ 
++void wpas_join_mesh(struct wpa_supplicant *wpa_s)
++{
++	struct wpa_driver_mesh_join_params *params = wpa_s->mesh_params;
++	struct wpa_ssid *ssid = wpa_s->current_ssid;
++	int ret = 0;
++
++	if (ssid->key_mgmt & WPA_KEY_MGMT_SAE) {
++		wpa_s->pairwise_cipher = wpa_s->mesh_rsn->pairwise_cipher;
++		wpa_s->group_cipher = wpa_s->mesh_rsn->group_cipher;
++		wpa_s->mgmt_group_cipher = wpa_s->mesh_rsn->mgmt_group_cipher;
++	}
++
++	if (wpa_s->ifmsh) {
++		params->ies = wpa_s->ifmsh->mconf->rsn_ie;
++		params->ie_len = wpa_s->ifmsh->mconf->rsn_ie_len;
++		params->basic_rates = wpa_s->ifmsh->basic_rates;
++		params->conf.flags |= WPA_DRIVER_MESH_CONF_FLAG_HT_OP_MODE;
++		params->conf.ht_opmode = wpa_s->ifmsh->bss[0]->iface->ht_op_mode;
++	}
++
++	ret = wpa_drv_join_mesh(wpa_s, params);
++	if (ret)
++		wpa_msg(wpa_s, MSG_ERROR, "mesh join error=%d\n", ret);
++
++	/* hostapd sets the interface down until we associate */
++	wpa_drv_set_operstate(wpa_s, 1);
++
++	if (!ret)
++		wpa_supplicant_set_state(wpa_s, WPA_COMPLETED);
++
++	return;
++}
++
++
+ int wpa_supplicant_join_mesh(struct wpa_supplicant *wpa_s,
+ 			     struct wpa_ssid *ssid)
+ {
+-	struct wpa_driver_mesh_join_params params;
++	struct wpa_driver_mesh_join_params *params =
++		os_zalloc(sizeof(struct wpa_driver_mesh_join_params));
+ 	int ret = 0;
+ 
+-	if (!ssid || !ssid->ssid || !ssid->ssid_len || !ssid->frequency) {
++	if (!ssid || !ssid->ssid || !ssid->ssid_len || !ssid->frequency || !params) {
+ 		ret = -ENOENT;
+ 		goto out;
+ 	}
+@@ -376,22 +412,22 @@ int wpa_supplicant_join_mesh(struct wpa_
+ 	wpa_s->group_cipher = WPA_CIPHER_NONE;
+ 	wpa_s->mgmt_group_cipher = 0;
+ 
+-	os_memset(&params, 0, sizeof(params));
+-	params.meshid = ssid->ssid;
+-	params.meshid_len = ssid->ssid_len;
+-	ibss_mesh_setup_freq(wpa_s, ssid, &params.freq);
+-	wpa_s->mesh_ht_enabled = !!params.freq.ht_enabled;
+-	wpa_s->mesh_vht_enabled = !!params.freq.vht_enabled;
+-	if (params.freq.ht_enabled && params.freq.sec_channel_offset)
+-		ssid->ht40 = params.freq.sec_channel_offset;
++	params->meshid = ssid->ssid;
++	params->meshid_len = ssid->ssid_len;
++	ibss_mesh_setup_freq(wpa_s, ssid, &params->freq);
++	wpa_s->mesh_ht_enabled = !!params->freq.ht_enabled;
++	wpa_s->mesh_vht_enabled = !!params->freq.vht_enabled;
++	if (params->freq.ht_enabled && params->freq.sec_channel_offset)
++		ssid->ht40 = params->freq.sec_channel_offset;
++
+ 	if (wpa_s->mesh_vht_enabled) {
+ 		ssid->vht = 1;
+-		switch (params.freq.bandwidth) {
++		switch (params->freq.bandwidth) {
+ 		case 80:
+-			if (params.freq.center_freq2) {
++			if (params->freq.center_freq2) {
+ 				ssid->max_oper_chwidth = VHT_CHANWIDTH_80P80MHZ;
+ 				ssid->vht_center_freq2 =
+-					params.freq.center_freq2;
++					params->freq.center_freq2;
+ 			} else {
+ 				ssid->max_oper_chwidth = VHT_CHANWIDTH_80MHZ;
+ 			}
+@@ -405,67 +441,43 @@ int wpa_supplicant_join_mesh(struct wpa_
+ 		}
+ 	}
+ 	if (ssid->beacon_int > 0)
+-		params.beacon_int = ssid->beacon_int;
++		params->beacon_int = ssid->beacon_int;
+ 	else if (wpa_s->conf->beacon_int > 0)
+-		params.beacon_int = wpa_s->conf->beacon_int;
++		params->beacon_int = wpa_s->conf->beacon_int;
+ 	if (ssid->dtim_period > 0)
+-		params.dtim_period = ssid->dtim_period;
++		params->dtim_period = ssid->dtim_period;
+ 	else if (wpa_s->conf->dtim_period > 0)
+-		params.dtim_period = wpa_s->conf->dtim_period;
+-	params.conf.max_peer_links = wpa_s->conf->max_peer_links;
++		params->dtim_period = wpa_s->conf->dtim_period;
++	params->conf.max_peer_links = wpa_s->conf->max_peer_links;
+ 	if (ssid->mesh_rssi_threshold < DEFAULT_MESH_RSSI_THRESHOLD) {
+-		params.conf.rssi_threshold = ssid->mesh_rssi_threshold;
+-		params.conf.flags |= WPA_DRIVER_MESH_CONF_FLAG_RSSI_THRESHOLD;
++		params->conf.rssi_threshold = ssid->mesh_rssi_threshold;
++		params->conf.flags |= WPA_DRIVER_MESH_CONF_FLAG_RSSI_THRESHOLD;
+ 	}
+ 
+ 	if (ssid->key_mgmt & WPA_KEY_MGMT_SAE) {
+-		params.flags |= WPA_DRIVER_MESH_FLAG_SAE_AUTH;
+-		params.flags |= WPA_DRIVER_MESH_FLAG_AMPE;
++		params->flags |= WPA_DRIVER_MESH_FLAG_SAE_AUTH;
++		params->flags |= WPA_DRIVER_MESH_FLAG_AMPE;
+ 		wpa_s->conf->user_mpm = 1;
+ 	}
+ 
+ 	if (wpa_s->conf->user_mpm) {
+-		params.flags |= WPA_DRIVER_MESH_FLAG_USER_MPM;
+-		params.conf.auto_plinks = 0;
++		params->flags |= WPA_DRIVER_MESH_FLAG_USER_MPM;
++		params->conf.auto_plinks = 0;
+ 	} else {
+-		params.flags |= WPA_DRIVER_MESH_FLAG_DRIVER_MPM;
+-		params.conf.auto_plinks = 1;
++		params->flags |= WPA_DRIVER_MESH_FLAG_DRIVER_MPM;
++		params->conf.auto_plinks = 1;
+ 	}
+-	params.conf.peer_link_timeout = wpa_s->conf->mesh_max_inactivity;
++	params->conf.peer_link_timeout = wpa_s->conf->mesh_max_inactivity;
+ 
+-	if (wpa_supplicant_mesh_init(wpa_s, ssid, &params.freq)) {
++	wpa_s->mesh_params = params;
++	if (wpa_supplicant_mesh_init(wpa_s, ssid, &params->freq)) {
+ 		wpa_msg(wpa_s, MSG_ERROR, "Failed to init mesh");
+ 		wpa_drv_leave_mesh(wpa_s);
+ 		ret = -1;
+ 		goto out;
+ 	}
+ 
+-	if (ssid->key_mgmt & WPA_KEY_MGMT_SAE) {
+-		wpa_s->pairwise_cipher = wpa_s->mesh_rsn->pairwise_cipher;
+-		wpa_s->group_cipher = wpa_s->mesh_rsn->group_cipher;
+-		wpa_s->mgmt_group_cipher = wpa_s->mesh_rsn->mgmt_group_cipher;
+-	}
+-
+-	if (wpa_s->ifmsh) {
+-		params.ies = wpa_s->ifmsh->mconf->rsn_ie;
+-		params.ie_len = wpa_s->ifmsh->mconf->rsn_ie_len;
+-		params.basic_rates = wpa_s->ifmsh->basic_rates;
+-		params.conf.flags |= WPA_DRIVER_MESH_CONF_FLAG_HT_OP_MODE;
+-		params.conf.ht_opmode = wpa_s->ifmsh->bss[0]->iface->ht_op_mode;
+-	}
+-
+-	wpa_msg(wpa_s, MSG_INFO, "joining mesh %s",
+-		wpa_ssid_txt(ssid->ssid, ssid->ssid_len));
+-	ret = wpa_drv_join_mesh(wpa_s, &params);
+-	if (ret)
+-		wpa_msg(wpa_s, MSG_ERROR, "mesh join error=%d", ret);
+-
+-	/* hostapd sets the interface down until we associate */
+-	wpa_drv_set_operstate(wpa_s, 1);
+-
+-	if (!ret)
+-		wpa_supplicant_set_state(wpa_s, WPA_COMPLETED);
+-
++	wpas_join_mesh(wpa_s);
+ out:
+ 	return ret;
+ }
+--- a/wpa_supplicant/mesh.h
++++ b/wpa_supplicant/mesh.h
+@@ -21,6 +21,7 @@ int wpas_mesh_add_interface(struct wpa_s
+ int wpas_mesh_peer_remove(struct wpa_supplicant *wpa_s, const u8 *addr);
+ int wpas_mesh_peer_add(struct wpa_supplicant *wpa_s, const u8 *addr,
+ 		       int duration);
++void wpas_join_mesh(struct wpa_supplicant *wpa_s);
+ 
+ #ifdef CONFIG_MESH
+ 
+--- a/wpa_supplicant/wpa_supplicant_i.h
++++ b/wpa_supplicant/wpa_supplicant_i.h
+@@ -810,6 +810,7 @@ struct wpa_supplicant {
+ 	unsigned int mesh_if_created:1;
+ 	unsigned int mesh_ht_enabled:1;
+ 	unsigned int mesh_vht_enabled:1;
++	struct wpa_driver_mesh_join_params *mesh_params;
+ #ifdef CONFIG_PMKSA_CACHE_EXTERNAL
+ 	/* struct external_pmksa_cache::list */
+ 	struct dl_list mesh_external_pmksa_cache;

package/network/services/hostapd/patches/0102-mesh-factor-out-rsn-initialization.patch

@@ -0,0 +1,115 @@
+From 04ebcadc059a6cfd45cd8ec06e6321b69bdb68b8 Mon Sep 17 00:00:00 2001
+From: Peter Oh <[email protected]>
+Date: Thu, 12 Apr 2018 02:48:59 -0700
+Subject: [PATCH 02/15] mesh: factor out rsn initialization
+
+RSN initialization can be used in different phases
+if mesh initialization and mesh join don't happen
+in sequence such as DFS CAC is done in between,
+hence factor it out to help convering the case.
+
+Signed-off-by: Peter Oh <[email protected]>
+---
+ wpa_supplicant/mesh.c | 73 ++++++++++++++++++++++++++-----------------
+ wpa_supplicant/mesh.h |  1 +
+ 2 files changed, 45 insertions(+), 29 deletions(-)
+
+--- a/wpa_supplicant/mesh.c
++++ b/wpa_supplicant/mesh.c
+@@ -147,6 +147,48 @@ static void wpas_mesh_copy_groups(struct
+ 			  groups_size);
+ }
+ 
++int wpas_mesh_init_rsn(struct wpa_supplicant *wpa_s)
++{
++	struct hostapd_iface *ifmsh = wpa_s->ifmsh;
++	struct mesh_conf *mconf = wpa_s->ifmsh->mconf;
++	struct wpa_ssid *ssid = wpa_s->current_ssid;
++	struct hostapd_data *bss = ifmsh->bss[0];
++	static int default_groups[] = { 19, 20, 21, 25, 26, -1 };
++	size_t len;
++
++	if (mconf->security != MESH_CONF_SEC_NONE) {
++		if (ssid->passphrase == NULL) {
++			wpa_printf(MSG_ERROR,
++				   "mesh: Passphrase for SAE not configured");
++			return -1;
++		}
++
++		bss->conf->wpa = ssid->proto;
++		bss->conf->wpa_key_mgmt = ssid->key_mgmt;
++
++		if (wpa_s->conf->sae_groups &&
++		    wpa_s->conf->sae_groups[0] > 0) {
++			wpas_mesh_copy_groups(bss, wpa_s);
++		} else {
++			bss->conf->sae_groups =
++				os_memdup(default_groups,
++					  sizeof(default_groups));
++			if (!bss->conf->sae_groups)
++				return -1;
++		}
++
++		len = os_strlen(ssid->passphrase);
++		bss->conf->ssid.wpa_passphrase =
++			dup_binstr(ssid->passphrase, len);
++
++		wpa_s->mesh_rsn = mesh_rsn_auth_init(wpa_s, mconf);
++		if (!wpa_s->mesh_rsn)
++			return -1;
++	}
++
++	return 0;
++}
++
+ 
+ static int wpa_supplicant_mesh_init(struct wpa_supplicant *wpa_s,
+ 				    struct wpa_ssid *ssid,
+@@ -291,35 +333,8 @@ static int wpa_supplicant_mesh_init(stru
+ 		return -1;
+ 	}
+ 
+-	if (mconf->security != MESH_CONF_SEC_NONE) {
+-		if (ssid->passphrase == NULL) {
+-			wpa_printf(MSG_ERROR,
+-				   "mesh: Passphrase for SAE not configured");
+-			goto out_free;
+-		}
+-
+-		bss->conf->wpa = ssid->proto;
+-		bss->conf->wpa_key_mgmt = ssid->key_mgmt;
+-
+-		if (wpa_s->conf->sae_groups &&
+-		    wpa_s->conf->sae_groups[0] > 0) {
+-			wpas_mesh_copy_groups(bss, wpa_s);
+-		} else {
+-			bss->conf->sae_groups =
+-				os_memdup(default_groups,
+-					  sizeof(default_groups));
+-			if (!bss->conf->sae_groups)
+-				goto out_free;
+-		}
+-
+-		len = os_strlen(ssid->passphrase);
+-		bss->conf->ssid.wpa_passphrase =
+-			dup_binstr(ssid->passphrase, len);
+-
+-		wpa_s->mesh_rsn = mesh_rsn_auth_init(wpa_s, mconf);
+-		if (!wpa_s->mesh_rsn)
+-			goto out_free;
+-	}
++	if (wpas_mesh_init_rsn(wpa_s))
++		goto out_free;
+ 
+ 	wpa_supplicant_conf_ap_ht(wpa_s, ssid, conf);
+ 
+--- a/wpa_supplicant/mesh.h
++++ b/wpa_supplicant/mesh.h
+@@ -22,6 +22,7 @@ int wpas_mesh_peer_remove(struct wpa_sup
+ int wpas_mesh_peer_add(struct wpa_supplicant *wpa_s, const u8 *addr,
+ 		       int duration);
+ void wpas_join_mesh(struct wpa_supplicant *wpa_s);
++int wpas_mesh_init_rsn(struct wpa_supplicant *wpa_s);
+ 
+ #ifdef CONFIG_MESH
+ 

package/network/services/hostapd/patches/0103-mesh-relocate-RSN-init-function.patch

@@ -0,0 +1,41 @@
+From cbe8b9901f9cc254cbaa1ec1cee1c52af8f828bf Mon Sep 17 00:00:00 2001
+From: Peter Oh <[email protected]>
+Date: Thu, 12 Apr 2018 02:49:00 -0700
+Subject: [PATCH 03/15] mesh: relocate RSN init function
+
+RSN init function should work together with mesh join
+when it's used. Since mesh join could be called at different stage
+if DFS channel is used, relocate the function to mesh join.
+It is still the same call flows of mesh join before this changes
+if non-DFS channels are used, hence no side effect will occur.
+
+Signed-off-by: Peter Oh <[email protected]>
+---
+ wpa_supplicant/mesh.c | 9 ++++++---
+ 1 file changed, 6 insertions(+), 3 deletions(-)
+
+--- a/wpa_supplicant/mesh.c
++++ b/wpa_supplicant/mesh.c
+@@ -333,9 +333,6 @@ static int wpa_supplicant_mesh_init(stru
+ 		return -1;
+ 	}
+ 
+-	if (wpas_mesh_init_rsn(wpa_s))
+-		goto out_free;
+-
+ 	wpa_supplicant_conf_ap_ht(wpa_s, ssid, conf);
+ 
+ 	return 0;
+@@ -381,6 +378,12 @@ void wpas_join_mesh(struct wpa_supplican
+ 	struct wpa_ssid *ssid = wpa_s->current_ssid;
+ 	int ret = 0;
+ 
++	if (wpas_mesh_init_rsn(wpa_s)) {
++		wpa_printf(MSG_ERROR, "Init RSN failed. Deinit mesh...");
++		wpa_supplicant_mesh_deinit(wpa_s);
++		return;
++	}
++
+ 	if (ssid->key_mgmt & WPA_KEY_MGMT_SAE) {
+ 		wpa_s->pairwise_cipher = wpa_s->mesh_rsn->pairwise_cipher;
+ 		wpa_s->group_cipher = wpa_s->mesh_rsn->group_cipher;

package/network/services/hostapd/patches/0104-mesh-use-setup-completion-callback-to-complete-mesh-.patch

@@ -0,0 +1,73 @@
+From 8a4ebbb6bbbc1460c1d584d1a710bf1361797ffd Mon Sep 17 00:00:00 2001
+From: Peter Oh <[email protected]>
+Date: Thu, 12 Apr 2018 02:49:01 -0700
+Subject: [PATCH 04/15] mesh: use setup completion callback to complete mesh
+ join
+
+mesh join function is the last function to be called during
+mesh join process, but it's been called a bit earlier than
+it's supposed to be, so that some mesh parameter values
+such as VHT capabilities not applied correct when mesh join
+is in process. Moreover current design of mesh join that is called
+directly after mesh initialization is not suitable for DFS channels
+to use, since mesh join process should be paused until DFS CAC is
+done and resumed once it's done.
+Using setup completion callback is how AP mode is using for DFS channels
+and mesh can use the same way.
+The callback will be called by hostapd_setup_interface_complete_sync.
+
+Signed-off-by: Peter Oh <[email protected]>
+---
+ wpa_supplicant/mesh.c | 7 +++++--
+ wpa_supplicant/mesh.h | 2 +-
+ 2 files changed, 6 insertions(+), 3 deletions(-)
+
+--- a/wpa_supplicant/mesh.c
++++ b/wpa_supplicant/mesh.c
+@@ -215,6 +215,7 @@ static int wpa_supplicant_mesh_init(stru
+ 	if (!ifmsh)
+ 		return -ENOMEM;
+ 
++	ifmsh->owner = wpa_s;
+ 	ifmsh->drv_flags = wpa_s->drv_flags;
+ 	ifmsh->num_bss = 1;
+ 	ifmsh->bss = os_calloc(wpa_s->ifmsh->num_bss,
+@@ -231,6 +232,8 @@ static int wpa_supplicant_mesh_init(stru
+ 	bss->drv_priv = wpa_s->drv_priv;
+ 	bss->iface = ifmsh;
+ 	bss->mesh_sta_free_cb = mesh_mpm_free_sta;
++	bss->setup_complete_cb = wpas_mesh_complete_cb;
++	bss->setup_complete_cb_ctx = wpa_s;
+ 	frequency = ssid->frequency;
+ 	if (frequency != freq->freq &&
+ 	    frequency == freq->freq + freq->sec_channel_offset * 20) {
+@@ -372,8 +375,9 @@ void wpa_supplicant_mesh_add_scan_ie(str
+ }
+ 
+ 
+-void wpas_join_mesh(struct wpa_supplicant *wpa_s)
++void wpas_mesh_complete_cb(void *ctx)
+ {
++	struct wpa_supplicant *wpa_s = (struct wpa_supplicant *)ctx;
+ 	struct wpa_driver_mesh_join_params *params = wpa_s->mesh_params;
+ 	struct wpa_ssid *ssid = wpa_s->current_ssid;
+ 	int ret = 0;
+@@ -495,7 +499,6 @@ int wpa_supplicant_join_mesh(struct wpa_
+ 		goto out;
+ 	}
+ 
+-	wpas_join_mesh(wpa_s);
+ out:
+ 	return ret;
+ }
+--- a/wpa_supplicant/mesh.h
++++ b/wpa_supplicant/mesh.h
+@@ -21,7 +21,7 @@ int wpas_mesh_add_interface(struct wpa_s
+ int wpas_mesh_peer_remove(struct wpa_supplicant *wpa_s, const u8 *addr);
+ int wpas_mesh_peer_add(struct wpa_supplicant *wpa_s, const u8 *addr,
+ 		       int duration);
+-void wpas_join_mesh(struct wpa_supplicant *wpa_s);
++void wpas_mesh_complete_cb(void *ctx);
+ int wpas_mesh_init_rsn(struct wpa_supplicant *wpa_s);
+ 
+ #ifdef CONFIG_MESH

package/network/services/hostapd/patches/0105-mesh-reflect-country-setting-to-mesh-configuration.patch

@@ -0,0 +1,32 @@
+From e223e851cbe776029a2768b56e7aa1a9f2873d09 Mon Sep 17 00:00:00 2001
+From: Peter Oh <[email protected]>
+Date: Thu, 12 Apr 2018 02:49:02 -0700
+Subject: [PATCH 05/15] mesh: reflect country setting to mesh configuration
+
+wpa_supplicant configuration has country parameter that is
+supposed to be used in AP mode to indicate supporting 802.11h
+and 802.11d. Reflect this configuration to Mesh also since Mesh
+is required to support 802.11h and 802.11d to use DFS channels.
+
+Signed-off-by: Peter Oh <[email protected]>
+---
+ wpa_supplicant/mesh.c | 8 ++++++++
+ 1 file changed, 8 insertions(+)
+
+--- a/wpa_supplicant/mesh.c
++++ b/wpa_supplicant/mesh.c
+@@ -252,6 +252,14 @@ static int wpa_supplicant_mesh_init(stru
+ 	bss->conf->start_disabled = 1;
+ 	bss->conf->mesh = MESH_ENABLED;
+ 	bss->conf->ap_max_inactivity = wpa_s->conf->mesh_max_inactivity;
++
++	if (ieee80211_is_dfs(ssid->frequency) && wpa_s->conf->country[0]) {
++		conf->ieee80211h = 1;
++		conf->ieee80211d = 1;
++		conf->country[0] = wpa_s->conf->country[0];
++		conf->country[1] = wpa_s->conf->country[1];
++	}
++
+ 	bss->iconf = conf;
+ 	ifmsh->conf = conf;
+ 

package/network/services/hostapd/patches/0106-mesh-inform-kernel-driver-DFS-handler-in-userspace.patch

@@ -0,0 +1,48 @@
+From c7f107e52205dd5fdb20f7ae13413b3673b0547e Mon Sep 17 00:00:00 2001
+From: Peter Oh <[email protected]>
+Date: Thu, 12 Apr 2018 02:49:03 -0700
+Subject: [PATCH 06/15] mesh: inform kernel driver DFS handler in userspace
+
+NL80211_ATTR_HANDLE_DFS is required by kerenel space
+to enable DFS channels that indicates DFS handler
+resides in userspace.
+
+Signed-off-by: Peter Oh <[email protected]>
+---
+ src/drivers/driver.h         | 1 +
+ src/drivers/driver_nl80211.c | 3 +++
+ wpa_supplicant/mesh.c        | 1 +
+ 3 files changed, 5 insertions(+)
+
+--- a/src/drivers/driver.h
++++ b/src/drivers/driver.h
+@@ -1390,6 +1390,7 @@ struct wpa_driver_mesh_join_params {
+ #define WPA_DRIVER_MESH_FLAG_SAE_AUTH	0x00000004
+ #define WPA_DRIVER_MESH_FLAG_AMPE	0x00000008
+ 	unsigned int flags;
++	u8 handle_dfs;
+ };
+ 
+ /**
+--- a/src/drivers/driver_nl80211.c
++++ b/src/drivers/driver_nl80211.c
+@@ -9244,6 +9244,9 @@ static int nl80211_join_mesh(struct i802
+ 
+ 	wpa_printf(MSG_DEBUG, "  * flags=%08X", params->flags);
+ 
++	if (params->handle_dfs)
++		if (nla_put_flag(msg, NL80211_ATTR_HANDLE_DFS))
++			goto fail;
+ 	container = nla_nest_start(msg, NL80211_ATTR_MESH_SETUP);
+ 	if (!container)
+ 		goto fail;
+--- a/wpa_supplicant/mesh.c
++++ b/wpa_supplicant/mesh.c
+@@ -258,6 +258,7 @@ static int wpa_supplicant_mesh_init(stru
+ 		conf->ieee80211d = 1;
+ 		conf->country[0] = wpa_s->conf->country[0];
+ 		conf->country[1] = wpa_s->conf->country[1];
++		wpa_s->mesh_params->handle_dfs = 1;
+ 	}
+ 
+ 	bss->iconf = conf;

package/network/services/hostapd/patches/0107-mesh-apply-channel-attributes-before-running-Mesh.patch

@@ -0,0 +1,33 @@
+From a0c5eea22d5d1181dbe0861b24e4b9bb598f4e50 Mon Sep 17 00:00:00 2001
+From: Peter Oh <[email protected]>
+Date: Thu, 12 Apr 2018 02:49:04 -0700
+Subject: [PATCH 07/15] mesh: apply channel attributes before running Mesh
+
+This helps mesh interface initializes with correct
+channel parameters.
+
+Signed-off-by: Peter Oh <[email protected]>
+---
+ wpa_supplicant/mesh.c | 4 ++--
+ 1 file changed, 2 insertions(+), 2 deletions(-)
+
+--- a/wpa_supplicant/mesh.c
++++ b/wpa_supplicant/mesh.c
+@@ -334,6 +334,8 @@ static int wpa_supplicant_mesh_init(stru
+ 		conf->basic_rates[rate_len] = -1;
+ 	}
+ 
++	wpa_supplicant_conf_ap_ht(wpa_s, ssid, conf);
++
+ 	if (hostapd_setup_interface(ifmsh)) {
+ 		wpa_printf(MSG_ERROR,
+ 			   "Failed to initialize hostapd interface for mesh");
+@@ -345,8 +347,6 @@ static int wpa_supplicant_mesh_init(stru
+ 		return -1;
+ 	}
+ 
+-	wpa_supplicant_conf_ap_ht(wpa_s, ssid, conf);
+-
+ 	return 0;
+ out_free:
+ 	wpa_supplicant_mesh_deinit(wpa_s);

package/network/services/hostapd/patches/0108-mesh-set-interface-type-to-mesh-before-setting-inter.patch

@@ -0,0 +1,36 @@
+From 143809f1e60f749a5a5c72735ffa8eb99d602cc1 Mon Sep 17 00:00:00 2001
+From: Peter Oh <[email protected]>
+Date: Thu, 12 Apr 2018 02:49:05 -0700
+Subject: [PATCH 08/15] mesh: set interface type to mesh before setting
+ interface
+
+Correct interface type is required to start DFS CAC that can be
+triggered during interface setup.
+
+Signed-off-by: Peter Oh <[email protected]>
+---
+ wpa_supplicant/mesh.c | 10 +++++-----
+ 1 file changed, 5 insertions(+), 5 deletions(-)
+
+--- a/wpa_supplicant/mesh.c
++++ b/wpa_supplicant/mesh.c
+@@ -336,14 +336,14 @@ static int wpa_supplicant_mesh_init(stru
+ 
+ 	wpa_supplicant_conf_ap_ht(wpa_s, ssid, conf);
+ 
+-	if (hostapd_setup_interface(ifmsh)) {
+-		wpa_printf(MSG_ERROR,
+-			   "Failed to initialize hostapd interface for mesh");
++	if (wpa_drv_init_mesh(wpa_s)) {
++		wpa_msg(wpa_s, MSG_ERROR, "Failed to init mesh in driver");
+ 		return -1;
+ 	}
+ 
+-	if (wpa_drv_init_mesh(wpa_s)) {
+-		wpa_msg(wpa_s, MSG_ERROR, "Failed to init mesh in driver");
++	if (hostapd_setup_interface(ifmsh)) {
++		wpa_printf(MSG_ERROR,
++			   "Failed to initialize hostapd interface for mesh");
+ 		return -1;
+ 	}
+ 

package/network/services/hostapd/patches/0109-mesh-set-mesh-center-frequency.patch

@@ -0,0 +1,22 @@
+From 4347c97600f4484be8df804dfb5ed85b867d3c43 Mon Sep 17 00:00:00 2001
+From: Peter Oh <[email protected]>
+Date: Thu, 12 Apr 2018 02:49:06 -0700
+Subject: [PATCH 09/15] mesh: set mesh center frequency
+
+vht center frequency value is required to compose the correct channel info.
+
+Signed-off-by: Peter Oh <[email protected]>
+---
+ wpa_supplicant/mesh.c | 1 +
+ 1 file changed, 1 insertion(+)
+
+--- a/wpa_supplicant/mesh.c
++++ b/wpa_supplicant/mesh.c
+@@ -453,6 +453,7 @@ int wpa_supplicant_join_mesh(struct wpa_
+ 
+ 	if (wpa_s->mesh_vht_enabled) {
+ 		ssid->vht = 1;
++		ssid->vht_center_freq1 = params->freq.center_freq1;
+ 		switch (params->freq.bandwidth) {
+ 		case 80:
+ 			if (params->freq.center_freq2) {

package/network/services/hostapd/patches/0110-mesh-consider-mesh-interface-on-dfs-event-handler.patch

@@ -0,0 +1,138 @@
+From d0a0e1030005834b99225feb64ec3794d31beab0 Mon Sep 17 00:00:00 2001
+From: Peter Oh <[email protected]>
+Date: Thu, 12 Apr 2018 02:49:07 -0700
+Subject: [PATCH 10/15] mesh: consider mesh interface on dfs event handler
+
+Once mesh starts supporting DFS channels, it has to handle DFS related events
+from drivers, hence add mesh interface to the check list.
+
+Signed-off-by: Peter Oh <[email protected]>
+---
+ wpa_supplicant/ap.c     | 55 ++++++++++++++++++++++++++++++++---------
+ wpa_supplicant/events.c |  1 +
+ 2 files changed, 44 insertions(+), 12 deletions(-)
+
+--- a/wpa_supplicant/ap.c
++++ b/wpa_supplicant/ap.c
+@@ -1328,13 +1328,18 @@ int ap_ctrl_iface_chanswitch(struct wpa_
+ void wpas_ap_ch_switch(struct wpa_supplicant *wpa_s, int freq, int ht,
+ 		       int offset, int width, int cf1, int cf2)
+ {
++	struct hostapd_iface *iface = wpa_s->ap_iface;
++
+ 	if (!wpa_s->ap_iface)
+-		return;
++		if (!wpa_s->ifmsh)
++			return;
++		else
++			iface = wpa_s->ifmsh;
+ 
+ 	wpa_s->assoc_freq = freq;
+ 	if (wpa_s->current_ssid)
+ 		wpa_s->current_ssid->frequency = freq;
+-	hostapd_event_ch_switch(wpa_s->ap_iface->bss[0], freq, ht,
++	hostapd_event_ch_switch(iface->bss[0], freq, ht,
+ 				offset, width, cf1, cf2);
+ }
+ 
+@@ -1531,10 +1536,15 @@ int wpas_ap_pmksa_cache_add_external(str
+ void wpas_event_dfs_radar_detected(struct wpa_supplicant *wpa_s,
+ 				   struct dfs_event *radar)
+ {
++	struct hostapd_iface *iface = wpa_s->ap_iface;
++
+ 	if (!wpa_s->ap_iface || !wpa_s->ap_iface->bss[0])
+-		return;
++		if (!wpa_s->ifmsh || !wpa_s->ifmsh->bss[0])
++			return;
++		else
++			iface = wpa_s->ifmsh;
+ 	wpa_printf(MSG_DEBUG, "DFS radar detected on %d MHz", radar->freq);
+-	hostapd_dfs_radar_detected(wpa_s->ap_iface, radar->freq,
++	hostapd_dfs_radar_detected(iface, radar->freq,
+ 				   radar->ht_enabled, radar->chan_offset,
+ 				   radar->chan_width,
+ 				   radar->cf1, radar->cf2);
+@@ -1544,10 +1554,15 @@ void wpas_event_dfs_radar_detected(struc
+ void wpas_event_dfs_cac_started(struct wpa_supplicant *wpa_s,
+ 				struct dfs_event *radar)
+ {
++	struct hostapd_iface *iface = wpa_s->ap_iface;
++
+ 	if (!wpa_s->ap_iface || !wpa_s->ap_iface->bss[0])
+-		return;
++		if (!wpa_s->ifmsh || !wpa_s->ifmsh->bss[0])
++			return;
++		else
++			iface = wpa_s->ifmsh;
+ 	wpa_printf(MSG_DEBUG, "DFS CAC started on %d MHz", radar->freq);
+-	hostapd_dfs_start_cac(wpa_s->ap_iface, radar->freq,
++	hostapd_dfs_start_cac(iface, radar->freq,
+ 			      radar->ht_enabled, radar->chan_offset,
+ 			      radar->chan_width, radar->cf1, radar->cf2);
+ }
+@@ -1556,10 +1571,16 @@ void wpas_event_dfs_cac_started(struct w
+ void wpas_event_dfs_cac_finished(struct wpa_supplicant *wpa_s,
+ 				 struct dfs_event *radar)
+ {
++	struct hostapd_iface *iface = wpa_s->ap_iface;
++
+ 	if (!wpa_s->ap_iface || !wpa_s->ap_iface->bss[0])
+-		return;
++		if (!wpa_s->ifmsh || !wpa_s->ifmsh->bss[0])
++			return;
++		else
++			iface = wpa_s->ifmsh;
++
+ 	wpa_printf(MSG_DEBUG, "DFS CAC finished on %d MHz", radar->freq);
+-	hostapd_dfs_complete_cac(wpa_s->ap_iface, 1, radar->freq,
++	hostapd_dfs_complete_cac(iface, 1, radar->freq,
+ 				 radar->ht_enabled, radar->chan_offset,
+ 				 radar->chan_width, radar->cf1, radar->cf2);
+ }
+@@ -1568,10 +1589,15 @@ void wpas_event_dfs_cac_finished(struct
+ void wpas_event_dfs_cac_aborted(struct wpa_supplicant *wpa_s,
+ 				struct dfs_event *radar)
+ {
++	struct hostapd_iface *iface = wpa_s->ap_iface;
++
+ 	if (!wpa_s->ap_iface || !wpa_s->ap_iface->bss[0])
+-		return;
++		if (!wpa_s->ifmsh || !wpa_s->ifmsh->bss[0])
++			return;
++		else
++			iface = wpa_s->ifmsh;
+ 	wpa_printf(MSG_DEBUG, "DFS CAC aborted on %d MHz", radar->freq);
+-	hostapd_dfs_complete_cac(wpa_s->ap_iface, 0, radar->freq,
++	hostapd_dfs_complete_cac(iface, 0, radar->freq,
+ 				 radar->ht_enabled, radar->chan_offset,
+ 				 radar->chan_width, radar->cf1, radar->cf2);
+ }
+@@ -1580,10 +1606,15 @@ void wpas_event_dfs_cac_aborted(struct w
+ void wpas_event_dfs_cac_nop_finished(struct wpa_supplicant *wpa_s,
+ 				     struct dfs_event *radar)
+ {
++	struct hostapd_iface *iface = wpa_s->ap_iface;
++
+ 	if (!wpa_s->ap_iface || !wpa_s->ap_iface->bss[0])
+-		return;
++		if (!wpa_s->ifmsh || !wpa_s->ifmsh->bss[0])
++			return;
++		else
++			iface = wpa_s->ifmsh;
+ 	wpa_printf(MSG_DEBUG, "DFS NOP finished on %d MHz", radar->freq);
+-	hostapd_dfs_nop_finished(wpa_s->ap_iface, radar->freq,
++	hostapd_dfs_nop_finished(iface, radar->freq,
+ 				 radar->ht_enabled, radar->chan_offset,
+ 				 radar->chan_width, radar->cf1, radar->cf2);
+ }
+--- a/wpa_supplicant/events.c
++++ b/wpa_supplicant/events.c
+@@ -4168,6 +4168,7 @@ void wpa_supplicant_event(void *ctx, enu
+ 
+ 		if (wpa_s->current_ssid->mode == WPAS_MODE_AP ||
+ 		    wpa_s->current_ssid->mode == WPAS_MODE_P2P_GO ||
++		    wpa_s->current_ssid->mode == WPAS_MODE_MESH ||
+ 		    wpa_s->current_ssid->mode ==
+ 		    WPAS_MODE_P2P_GROUP_FORMATION) {
+ 			wpas_ap_ch_switch(wpa_s, data->ch_switch.freq,

package/network/services/hostapd/patches/0111-mesh-Allow-DFS-channels-to-be-selected-if-dfs-is-ena.patch

@@ -0,0 +1,79 @@
+From e7fc5d2e6b34102282ff94a6e5255af4b6e9ccb5 Mon Sep 17 00:00:00 2001
+From: Peter Oh <[email protected]>
+Date: Thu, 12 Apr 2018 02:49:08 -0700
+Subject: [PATCH 11/15] mesh: Allow DFS channels to be selected if dfs is
+ enabled
+
+Note: DFS is assumed to be usable if a country code has been set
+
+Signed-off-by: Benjamin Berg <[email protected]>
+Signed-off-by: Peter Oh <[email protected]>
+---
+ wpa_supplicant/wpa_supplicant.c | 24 ++++++++++++++++++------
+ 1 file changed, 18 insertions(+), 6 deletions(-)
+
+--- a/wpa_supplicant/wpa_supplicant.c
++++ b/wpa_supplicant/wpa_supplicant.c
+@@ -2033,6 +2033,8 @@ void ibss_mesh_setup_freq(struct wpa_sup
+ 	struct hostapd_freq_params vht_freq;
+ 	int chwidth, seg0, seg1;
+ 	u32 vht_caps = 0;
++	int dfs_enabled = wpa_s->conf->country[0] &&
++		(wpa_s->drv_flags & WPA_DRIVER_FLAGS_RADAR);
+ 
+ 	freq->freq = ssid->frequency;
+ 
+@@ -2109,8 +2111,11 @@ void ibss_mesh_setup_freq(struct wpa_sup
+ 		return;
+ 
+ 	/* Check primary channel flags */
+-	if (pri_chan->flag & (HOSTAPD_CHAN_DISABLED | HOSTAPD_CHAN_NO_IR))
++	if (pri_chan->flag & HOSTAPD_CHAN_DISABLED)
+ 		return;
++	if (pri_chan->flag & (HOSTAPD_CHAN_RADAR | HOSTAPD_CHAN_NO_IR))
++		if (!dfs_enabled)
++			return;
+ 
+ #ifdef CONFIG_HT_OVERRIDES
+ 	if (ssid->disable_ht40)
+@@ -2136,8 +2141,11 @@ void ibss_mesh_setup_freq(struct wpa_sup
+ 		return;
+ 
+ 	/* Check secondary channel flags */
+-	if (sec_chan->flag & (HOSTAPD_CHAN_DISABLED | HOSTAPD_CHAN_NO_IR))
++	if (sec_chan->flag & HOSTAPD_CHAN_DISABLED)
+ 		return;
++	if (sec_chan->flag & (HOSTAPD_CHAN_RADAR | HOSTAPD_CHAN_NO_IR))
++		if (!dfs_enabled)
++			return;
+ 
+ 	freq->channel = pri_chan->chan;
+ 
+@@ -2227,8 +2235,11 @@ void ibss_mesh_setup_freq(struct wpa_sup
+ 			return;
+ 
+ 		/* Back to HT configuration if channel not usable */
+-		if (chan->flag & (HOSTAPD_CHAN_DISABLED | HOSTAPD_CHAN_NO_IR))
++		if (chan->flag & HOSTAPD_CHAN_DISABLED)
+ 			return;
++		if (chan->flag & (HOSTAPD_CHAN_RADAR | HOSTAPD_CHAN_NO_IR))
++			if (!dfs_enabled)
++				return;
+ 	}
+ 
+ 	chwidth = VHT_CHANWIDTH_80MHZ;
+@@ -2248,10 +2259,11 @@ void ibss_mesh_setup_freq(struct wpa_sup
+ 				if (!chan)
+ 					continue;
+ 
+-				if (chan->flag & (HOSTAPD_CHAN_DISABLED |
+-						  HOSTAPD_CHAN_NO_IR |
+-						  HOSTAPD_CHAN_RADAR))
++				if (chan->flag & HOSTAPD_CHAN_DISABLED)
+ 					continue;
++				if (chan->flag & (HOSTAPD_CHAN_RADAR | HOSTAPD_CHAN_NO_IR))
++					if (!dfs_enabled)
++						continue;
+ 
+ 				/* Found a suitable second segment for 80+80 */
+ 				chwidth = VHT_CHANWIDTH_80P80MHZ;

package/network/services/hostapd/patches/0112-mesh-allow-mesh-to-send-channel-switch-request.patch

@@ -0,0 +1,25 @@
+From 851f67301a8b9bc96c3d8cce08e355a64d30350d Mon Sep 17 00:00:00 2001
+From: Peter Oh <[email protected]>
+Date: Thu, 12 Apr 2018 02:49:09 -0700
+Subject: [PATCH 12/15] mesh: allow mesh to send channel switch request
+
+add mesh type to nl80211 channel switch request,
+so mesh is able to send the request to kernel drivers.
+
+Signed-off-by: Peter Oh <[email protected]>
+---
+ src/drivers/driver_nl80211.c | 3 ++-
+ 1 file changed, 2 insertions(+), 1 deletion(-)
+
+--- a/src/drivers/driver_nl80211.c
++++ b/src/drivers/driver_nl80211.c
+@@ -8659,7 +8659,8 @@ static int nl80211_switch_channel(void *
+ 	}
+ 
+ 	if ((drv->nlmode != NL80211_IFTYPE_AP) &&
+-	    (drv->nlmode != NL80211_IFTYPE_P2P_GO))
++	    (drv->nlmode != NL80211_IFTYPE_P2P_GO) &&
++	    (drv->nlmode != NL80211_IFTYPE_MESH_POINT) )
+ 		return -EOPNOTSUPP;
+ 
+ 	/*

package/network/services/hostapd/patches/0113-mesh-do-not-allow-pri-sec-channel-switch.patch

@@ -0,0 +1,27 @@
+From 5fe4fa1c1f426d81496458d2127bfbd7623fe5d5 Mon Sep 17 00:00:00 2001
+From: Peter Oh <[email protected]>
+Date: Thu, 12 Apr 2018 02:49:10 -0700
+Subject: [PATCH 13/15] mesh: do not allow pri/sec channel switch
+
+We don't want mesh to switch the channel from primary to secondary,
+since mesh points are not able to join each other in that case.
+
+Signed-off-by: Peter Oh <[email protected]>
+---
+ wpa_supplicant/mesh.c | 5 ++++-
+ 1 file changed, 4 insertions(+), 1 deletion(-)
+
+--- a/wpa_supplicant/mesh.c
++++ b/wpa_supplicant/mesh.c
+@@ -333,7 +333,10 @@ static int wpa_supplicant_mesh_init(stru
+ 			  rate_len * sizeof(int));
+ 		conf->basic_rates[rate_len] = -1;
+ 	}
+-
++	/* Do not allow primary/secondary channel switch in mesh mode,
++	  * since mesh is not able to establish a physical link for it
++	  */
++	conf->no_pri_sec_switch = 1;
+ 	wpa_supplicant_conf_ap_ht(wpa_s, ssid, conf);
+ 
+ 	if (wpa_drv_init_mesh(wpa_s)) {

package/network/services/hostapd/patches/0114-mesh-do-not-allow-scan-result-to-swap-pri-sec.patch

@@ -0,0 +1,24 @@
+From fcc5fe675d1155d65df0471aa06f746c28b66b6c Mon Sep 17 00:00:00 2001
+From: Peter Oh <[email protected]>
+Date: Thu, 12 Apr 2018 02:49:11 -0700
+Subject: [PATCH 14/15] mesh: do not allow scan result to swap pri/sec
+
+Swapping between primary and secondary channel will break
+mesh from joining, hence don't allow it.
+
+Signed-off-by: Peter Oh <[email protected]>
+---
+ wpa_supplicant/wpa_supplicant.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/wpa_supplicant/wpa_supplicant.c
++++ b/wpa_supplicant/wpa_supplicant.c
+@@ -2158,7 +2158,7 @@ void ibss_mesh_setup_freq(struct wpa_sup
+ 	}
+ 	freq->sec_channel_offset = ht40;
+ 
+-	if (obss_scan) {
++	if (ssid->mode != WPAS_MODE_MESH && obss_scan) {
+ 		struct wpa_scan_results *scan_res;
+ 
+ 		scan_res = wpa_supplicant_get_scan_results(wpa_s, NULL, 0);

package/network/services/hostapd/patches/0115-mesh-do-not-use-offchan-mgmt-tx-on-DFS.patch

@@ -0,0 +1,40 @@
+From ab2ba9fd9ac73c83dc15a6d76d93df4434d539d6 Mon Sep 17 00:00:00 2001
+From: Peter Oh <[email protected]>
+Date: Thu, 12 Apr 2018 02:49:12 -0700
+Subject: [PATCH 15/15] mesh: do not use offchan mgmt tx on DFS
+
+Drivers don't allow mesh to use offchannel on management Tx.
+
+Signed-off-by: Peter Oh <[email protected]>
+---
+ src/drivers/driver_nl80211.c | 5 ++++-
+ 1 file changed, 4 insertions(+), 1 deletion(-)
+
+--- a/src/drivers/driver_nl80211.c
++++ b/src/drivers/driver_nl80211.c
+@@ -7148,6 +7148,7 @@ static int wpa_driver_nl80211_send_actio
+ 	struct wpa_driver_nl80211_data *drv = bss->drv;
+ 	int ret = -1;
+ 	u8 *buf;
++	int offchanok = 1;
+ 	struct ieee80211_hdr *hdr;
+ 
+ 	wpa_printf(MSG_DEBUG, "nl80211: Send Action frame (ifindex=%d, "
+@@ -7173,6 +7174,8 @@ static int wpa_driver_nl80211_send_actio
+ 		os_memset(bss->rand_addr, 0, ETH_ALEN);
+ 	}
+ 
++	if (is_mesh_interface(drv->nlmode) && ieee80211_is_dfs(freq))
++		offchanok = 0;
+ 	if (is_ap_interface(drv->nlmode) &&
+ 	    (!(drv->capa.flags & WPA_DRIVER_FLAGS_OFFCHANNEL_TX) ||
+ 	     (int) freq == bss->freq || drv->device_ap_sme ||
+@@ -7184,7 +7187,7 @@ static int wpa_driver_nl80211_send_actio
+ 		ret = nl80211_send_frame_cmd(bss, freq, wait_time, buf,
+ 					     24 + data_len,
+ 					     &drv->send_action_cookie,
+-					     no_cck, 0, 1, NULL, 0);
++					     no_cck, 0, offchanok, NULL, 0);
+ 
+ 	os_free(buf);
+ 	return ret;

package/network/services/hostapd/patches/020-mesh-properly-handle-sae_password.patch

@@ -0,0 +1,57 @@
+From 30c1693f42326d4f927e76120492bc9593b8f739 Mon Sep 17 00:00:00 2001
+From: Daniel Golle <[email protected]>
+Date: Fri, 13 Apr 2018 00:42:10 +0200
+Subject: [PATCH] mesh: properly handle sae_password
+
+The recently introduced sae_password parameter is only handled properly
+in wpa_supplicant/sme.c while wpa_supplicant/mesh.c assumed that
+ssid->passphrase exclusively holds the secret.
+Import the logic from sme.c to mesh.c to allow having only sae_password
+set which otherwise throws this error:
+AP-ENABLED
+mesh: Passphrase for SAE not configured
+Init RSN failed. Deinit mesh...
+wlan1: interface state ENABLED->DISABLED
+AP-DISABLED
+Segmentation fault
+
+Signed-off-by: Daniel Golle <[email protected]>
+---
+ wpa_supplicant/mesh.c | 10 +++++++---
+ 1 file changed, 7 insertions(+), 3 deletions(-)
+
+diff --git a/wpa_supplicant/mesh.c b/wpa_supplicant/mesh.c
+index 22dec4822..0bf87245d 100644
+--- a/wpa_supplicant/mesh.c
++++ b/wpa_supplicant/mesh.c
+@@ -154,10 +154,14 @@ int wpas_mesh_init_rsn(struct wpa_supplicant *wpa_s)
+ 	struct wpa_ssid *ssid = wpa_s->current_ssid;
+ 	struct hostapd_data *bss = ifmsh->bss[0];
+ 	static int default_groups[] = { 19, 20, 21, 25, 26, -1 };
++	const char *password;
+ 	size_t len;
+ 
+ 	if (mconf->security != MESH_CONF_SEC_NONE) {
+-		if (ssid->passphrase == NULL) {
++		password = ssid->sae_password;
++		if (!password)
++			password = ssid->passphrase;
++		if (!password) {
+ 			wpa_printf(MSG_ERROR,
+ 				   "mesh: Passphrase for SAE not configured");
+ 			return -1;
+@@ -177,9 +181,9 @@ int wpas_mesh_init_rsn(struct wpa_supplicant *wpa_s)
+ 				return -1;
+ 		}
+ 
+-		len = os_strlen(ssid->passphrase);
++		len = os_strlen(password);
+ 		bss->conf->ssid.wpa_passphrase =
+-			dup_binstr(ssid->passphrase, len);
++			dup_binstr(password, len);
+ 
+ 		wpa_s->mesh_rsn = mesh_rsn_auth_init(wpa_s, mconf);
+ 		if (!wpa_s->mesh_rsn)
+-- 
+2.17.0
+

package/network/services/hostapd/patches/120-disable_bridge_packet_workaround.patch

@@ -1,6 +1,6 @@
 --- a/src/l2_packet/l2_packet_linux.c
 +++ b/src/l2_packet/l2_packet_linux.c
-@@ -340,8 +340,7 @@ struct l2_packet_data * l2_packet_init_b
+@@ -360,8 +360,7 @@ struct l2_packet_data * l2_packet_init_b
  
  	l2 = l2_packet_init(br_ifname, own_addr, protocol, rx_callback,
  			    rx_callback_ctx, l2_hdr);

package/network/services/hostapd/patches/200-multicall.patch

@@ -72,7 +72,7 @@
  
  ifndef CONFIG_NO_GITVER
  # Add VERSION_STR postfix for builds from a git repository
-@@ -358,7 +359,9 @@ endif
+@@ -354,7 +355,9 @@ endif
  ifdef CONFIG_IBSS_RSN
  NEED_RSN_AUTHENTICATOR=y
  CFLAGS += -DCONFIG_IBSS_RSN
@@ -82,7 +82,7 @@
  OBJS += ibss_rsn.o
  endif
  
-@@ -866,6 +869,10 @@ ifdef CONFIG_DYNAMIC_EAP_METHODS
+@@ -862,6 +865,10 @@ ifdef CONFIG_DYNAMIC_EAP_METHODS
  CFLAGS += -DCONFIG_DYNAMIC_EAP_METHODS
  LIBS += -ldl -rdynamic
  endif
@@ -93,7 +93,7 @@
  endif
  
  ifdef CONFIG_AP
-@@ -873,9 +880,11 @@ NEED_EAP_COMMON=y
+@@ -869,9 +876,11 @@ NEED_EAP_COMMON=y
  NEED_RSN_AUTHENTICATOR=y
  CFLAGS += -DCONFIG_AP
  OBJS += ap.o
@@ -105,7 +105,7 @@
  OBJS += ../src/ap/hostapd.o
  OBJS += ../src/ap/wpa_auth_glue.o
  OBJS += ../src/ap/utils.o
-@@ -957,6 +966,12 @@ endif
+@@ -953,6 +962,12 @@ endif
  ifdef CONFIG_HS20
  OBJS += ../src/ap/hs20.o
  endif
@@ -118,7 +118,7 @@
  endif
  
  ifdef CONFIG_MBO
-@@ -965,7 +980,9 @@ CFLAGS += -DCONFIG_MBO
+@@ -961,7 +976,9 @@ CFLAGS += -DCONFIG_MBO
  endif
  
  ifdef NEED_RSN_AUTHENTICATOR
@@ -128,7 +128,7 @@
  NEED_AES_WRAP=y
  OBJS += ../src/ap/wpa_auth.o
  OBJS += ../src/ap/wpa_auth_ie.o
-@@ -1895,6 +1912,12 @@ wpa_priv: $(BCHECK) $(OBJS_priv)
+@@ -1887,6 +1904,12 @@ wpa_priv: $(BCHECK) $(OBJS_priv)
  
  $(OBJS_c) $(OBJS_t) $(OBJS_t2) $(OBJS) $(BCHECK) $(EXTRA_progs): .config
  
@@ -141,7 +141,7 @@
  wpa_supplicant: $(BCHECK) $(OBJS) $(EXTRA_progs)
  	$(Q)$(LDO) $(LDFLAGS) -o wpa_supplicant $(OBJS) $(LIBS) $(EXTRALIBS)
  	@$(E) "  LD " $@
-@@ -1997,6 +2020,12 @@ endif
+@@ -1989,6 +2012,12 @@ endif
  		-e 's|\@DBUS_INTERFACE\@|$(DBUS_INTERFACE)|g' $< >$@
  	@$(E) "  sed" $<
  
@@ -156,7 +156,7 @@
  wpa_cli.exe: wpa_cli
 --- a/src/drivers/driver.h
 +++ b/src/drivers/driver.h
-@@ -5418,8 +5418,8 @@ union wpa_event_data {
+@@ -5428,8 +5428,8 @@ union wpa_event_data {
   * Driver wrapper code should call this function whenever an event is received
   * from the driver.
   */
@@ -167,7 +167,7 @@
  
  /**
   * wpa_supplicant_event_global - Report a driver event for wpa_supplicant
-@@ -5431,7 +5431,7 @@ void wpa_supplicant_event(void *ctx, enu
+@@ -5441,7 +5441,7 @@ void wpa_supplicant_event(void *ctx, enu
   * Same as wpa_supplicant_event(), but we search for the interface in
   * wpa_global.
   */
@@ -242,7 +242,7 @@
  {
  	struct wpa_supplicant *wpa_s = ctx;
  	int resched;
-@@ -4628,7 +4628,7 @@ void wpa_supplicant_event(void *ctx, enu
+@@ -4632,7 +4632,7 @@ void wpa_supplicant_event(void *ctx, enu
  }
  
  
@@ -253,7 +253,7 @@
  	struct wpa_supplicant *wpa_s;
 --- a/wpa_supplicant/wpa_supplicant.c
 +++ b/wpa_supplicant/wpa_supplicant.c
-@@ -5678,7 +5678,6 @@ struct wpa_interface * wpa_supplicant_ma
+@@ -5725,7 +5725,6 @@ struct wpa_interface * wpa_supplicant_ma
  	return NULL;
  }
  
@@ -261,7 +261,7 @@
  /**
   * wpa_supplicant_match_existing - Match existing interfaces
   * @global: Pointer to global data from wpa_supplicant_init()
-@@ -5715,6 +5714,11 @@ static int wpa_supplicant_match_existing
+@@ -5762,6 +5761,11 @@ static int wpa_supplicant_match_existing
  
  #endif /* CONFIG_MATCH_IFACE */
  
@@ -273,7 +273,7 @@
  
  /**
   * wpa_supplicant_add_iface - Add a new network interface
-@@ -5971,6 +5975,8 @@ struct wpa_global * wpa_supplicant_init(
+@@ -6018,6 +6022,8 @@ struct wpa_global * wpa_supplicant_init(
  #ifndef CONFIG_NO_WPA_MSG
  	wpa_msg_register_ifname_cb(wpa_supplicant_msg_ifname_cb);
  #endif /* CONFIG_NO_WPA_MSG */

package/network/services/hostapd/patches/300-noscan.patch

@@ -1,6 +1,6 @@
 --- a/hostapd/config_file.c
 +++ b/hostapd/config_file.c
-@@ -3088,6 +3088,10 @@ static int hostapd_config_fill(struct ho
+@@ -3131,6 +3131,10 @@ static int hostapd_config_fill(struct ho
  		}
  #endif /* CONFIG_IEEE80211W */
  #ifdef CONFIG_IEEE80211N
@@ -13,7 +13,7 @@
  	} else if (os_strcmp(buf, "ht_capab") == 0) {
 --- a/src/ap/ap_config.h
 +++ b/src/ap/ap_config.h
-@@ -750,6 +750,8 @@ struct hostapd_config {
+@@ -761,6 +761,8 @@ struct hostapd_config {
  
  	int ht_op_mode_fixed;
  	u16 ht_capab;

package/network/services/hostapd/patches/310-rescan_immediately.patch

@@ -1,6 +1,6 @@
 --- a/wpa_supplicant/wpa_supplicant.c
 +++ b/wpa_supplicant/wpa_supplicant.c
-@@ -4126,7 +4126,7 @@ wpa_supplicant_alloc(struct wpa_supplica
+@@ -4176,7 +4176,7 @@ wpa_supplicant_alloc(struct wpa_supplica
  	if (wpa_s == NULL)
  		return NULL;
  	wpa_s->scan_req = INITIAL_SCAN_REQ;

package/network/services/hostapd/patches/330-nl80211_fix_set_freq.patch

@@ -1,6 +1,6 @@
 --- a/src/drivers/driver_nl80211.c
 +++ b/src/drivers/driver_nl80211.c
-@@ -4231,7 +4231,7 @@ static int nl80211_set_channel(struct i8
+@@ -4234,7 +4234,7 @@ static int nl80211_set_channel(struct i8
  		   freq->freq, freq->ht_enabled, freq->vht_enabled,
  		   freq->bandwidth, freq->center_freq1, freq->center_freq2);
  

package/network/services/hostapd/patches/340-reload_freq_change.patch

@@ -1,6 +1,6 @@
 --- a/src/ap/hostapd.c
 +++ b/src/ap/hostapd.c
-@@ -87,6 +87,25 @@ static void hostapd_reload_bss(struct ho
+@@ -90,6 +90,25 @@ static void hostapd_reload_bss(struct ho
  #endif /* CONFIG_NO_RADIUS */
  
  	ssid = &hapd->conf->ssid;
@@ -26,7 +26,7 @@
  	if (!ssid->wpa_psk_set && ssid->wpa_psk && !ssid->wpa_psk->next &&
  	    ssid->wpa_passphrase_set && ssid->wpa_passphrase) {
  		/*
-@@ -165,6 +184,7 @@ int hostapd_reload_config(struct hostapd
+@@ -168,6 +187,7 @@ int hostapd_reload_config(struct hostapd
  	struct hostapd_data *hapd = iface->bss[0];
  	struct hostapd_config *newconf, *oldconf;
  	size_t j;
@@ -34,7 +34,7 @@
  
  	if (iface->config_fname == NULL) {
  		/* Only in-memory config in use - assume it has been updated */
-@@ -186,21 +206,20 @@ int hostapd_reload_config(struct hostapd
+@@ -189,21 +209,20 @@ int hostapd_reload_config(struct hostapd
  	oldconf = hapd->iconf;
  	iface->conf = newconf;
  

package/network/services/hostapd/patches/350-nl80211_del_beacon_bss.patch

@@ -1,6 +1,6 @@
 --- a/src/drivers/driver_nl80211.c
 +++ b/src/drivers/driver_nl80211.c
-@@ -2563,10 +2563,15 @@ static int wpa_driver_nl80211_del_beacon
+@@ -2566,10 +2566,15 @@ static int wpa_driver_nl80211_del_beacon
  	struct nl_msg *msg;
  	struct wpa_driver_nl80211_data *drv = bss->drv;
  
@@ -18,7 +18,7 @@
  	return send_and_recv_msgs(drv, msg, NULL, NULL);
  }
  
-@@ -4832,7 +4837,7 @@ static void nl80211_teardown_ap(struct i
+@@ -4835,7 +4840,7 @@ static void nl80211_teardown_ap(struct i
  		nl80211_mgmt_unsubscribe(bss, "AP teardown");
  
  	nl80211_put_wiphy_data_ap(bss);
@@ -27,7 +27,7 @@
  }
  
  
-@@ -7037,8 +7042,6 @@ static int wpa_driver_nl80211_if_remove(
+@@ -7040,8 +7045,6 @@ static int wpa_driver_nl80211_if_remove(
  	} else {
  		wpa_printf(MSG_DEBUG, "nl80211: First BSS - reassign context");
  		nl80211_teardown_ap(bss);
@@ -36,7 +36,7 @@
  		nl80211_destroy_bss(bss);
  		if (!bss->added_if)
  			i802_set_iface_flags(bss, 0);
-@@ -7409,7 +7412,6 @@ static int wpa_driver_nl80211_deinit_ap(
+@@ -7415,7 +7418,6 @@ static int wpa_driver_nl80211_deinit_ap(
  	if (!is_ap_interface(drv->nlmode))
  		return -1;
  	wpa_driver_nl80211_del_beacon(bss);
@@ -44,7 +44,7 @@
  
  	/*
  	 * If the P2P GO interface was dynamically added, then it is
-@@ -7429,7 +7431,6 @@ static int wpa_driver_nl80211_stop_ap(vo
+@@ -7435,7 +7437,6 @@ static int wpa_driver_nl80211_stop_ap(vo
  	if (!is_ap_interface(drv->nlmode))
  		return -1;
  	wpa_driver_nl80211_del_beacon(bss);

package/network/services/hostapd/patches/370-ap_sta_support.patch

@@ -118,7 +118,7 @@
  		wpa_s->new_connection = 1;
  		wpa_drv_set_operstate(wpa_s, 0);
  #ifndef IEEE8021X_EAPOL
-@@ -5301,6 +5354,20 @@ static int wpa_supplicant_init_iface(str
+@@ -5351,6 +5404,20 @@ static int wpa_supplicant_init_iface(str
  			   sizeof(wpa_s->bridge_ifname));
  	}
  
@@ -139,7 +139,7 @@
  	/* RSNA Supplicant Key Management - INITIALIZE */
  	eapol_sm_notify_portEnabled(wpa_s->eapol, FALSE);
  	eapol_sm_notify_portValid(wpa_s->eapol, FALSE);
-@@ -5625,6 +5692,11 @@ static void wpa_supplicant_deinit_iface(
+@@ -5672,6 +5739,11 @@ static void wpa_supplicant_deinit_iface(
  	if (terminate)
  		wpa_msg(wpa_s, MSG_INFO, WPA_EVENT_TERMINATING);
  

package/network/services/hostapd/patches/380-disable_ctrl_iface_mib.patch

@@ -30,7 +30,7 @@
  			reply_len = -1;
 --- a/wpa_supplicant/Makefile
 +++ b/wpa_supplicant/Makefile
-@@ -931,6 +931,9 @@ ifdef CONFIG_FILS
+@@ -927,6 +927,9 @@ ifdef CONFIG_FILS
  OBJS += ../src/ap/fils_hlp.o
  endif
  ifdef CONFIG_CTRL_IFACE
@@ -42,7 +42,7 @@
  
 --- a/wpa_supplicant/ctrl_iface.c
 +++ b/wpa_supplicant/ctrl_iface.c
-@@ -2130,7 +2130,7 @@ static int wpa_supplicant_ctrl_iface_sta
+@@ -2108,7 +2108,7 @@ static int wpa_supplicant_ctrl_iface_sta
  			pos += ret;
  		}
  
@@ -51,7 +51,7 @@
  		if (wpa_s->ap_iface) {
  			pos += ap_ctrl_iface_wpa_get_status(wpa_s, pos,
  							    end - pos,
-@@ -9831,6 +9831,7 @@ char * wpa_supplicant_ctrl_iface_process
+@@ -9809,6 +9809,7 @@ char * wpa_supplicant_ctrl_iface_process
  			reply_len = -1;
  	} else if (os_strncmp(buf, "NOTE ", 5) == 0) {
  		wpa_printf(MSG_INFO, "NOTE: %s", buf + 5);
@@ -59,7 +59,7 @@
  	} else if (os_strcmp(buf, "MIB") == 0) {
  		reply_len = wpa_sm_get_mib(wpa_s->wpa, reply, reply_size);
  		if (reply_len >= 0) {
-@@ -9838,6 +9839,7 @@ char * wpa_supplicant_ctrl_iface_process
+@@ -9816,6 +9817,7 @@ char * wpa_supplicant_ctrl_iface_process
  						      reply + reply_len,
  						      reply_size - reply_len);
  		}
@@ -67,7 +67,7 @@
  	} else if (os_strncmp(buf, "STATUS", 6) == 0) {
  		reply_len = wpa_supplicant_ctrl_iface_status(
  			wpa_s, buf + 6, reply, reply_size);
-@@ -10319,6 +10321,7 @@ char * wpa_supplicant_ctrl_iface_process
+@@ -10297,6 +10299,7 @@ char * wpa_supplicant_ctrl_iface_process
  		reply_len = wpa_supplicant_ctrl_iface_bss(
  			wpa_s, buf + 4, reply, reply_size);
  #ifdef CONFIG_AP
@@ -75,7 +75,7 @@
  	} else if (os_strcmp(buf, "STA-FIRST") == 0) {
  		reply_len = ap_ctrl_iface_sta_first(wpa_s, reply, reply_size);
  	} else if (os_strncmp(buf, "STA ", 4) == 0) {
-@@ -10327,12 +10330,15 @@ char * wpa_supplicant_ctrl_iface_process
+@@ -10305,12 +10308,15 @@ char * wpa_supplicant_ctrl_iface_process
  	} else if (os_strncmp(buf, "STA-NEXT ", 9) == 0) {
  		reply_len = ap_ctrl_iface_sta_next(wpa_s, buf + 9, reply,
  						   reply_size);
@@ -126,7 +126,7 @@
  		if (os_snprintf_error(buflen - len, ret))
 --- a/src/ap/ieee802_1x.c
 +++ b/src/ap/ieee802_1x.c
-@@ -2501,6 +2501,7 @@ static const char * bool_txt(Boolean val
+@@ -2504,6 +2504,7 @@ static const char * bool_txt(Boolean val
  	return val ? "TRUE" : "FALSE";
  }
  
@@ -134,7 +134,7 @@
  
  int ieee802_1x_get_mib(struct hostapd_data *hapd, char *buf, size_t buflen)
  {
-@@ -2676,6 +2677,7 @@ int ieee802_1x_get_mib_sta(struct hostap
+@@ -2679,6 +2680,7 @@ int ieee802_1x_get_mib_sta(struct hostap
  	return len;
  }
  
@@ -144,7 +144,7 @@
  static void ieee802_1x_wnm_notif_send(void *eloop_ctx, void *timeout_ctx)
 --- a/src/ap/wpa_auth.c
 +++ b/src/ap/wpa_auth.c
-@@ -3773,6 +3773,7 @@ static const char * wpa_bool_txt(int val
+@@ -3772,6 +3772,7 @@ static const char * wpa_bool_txt(int val
  	return val ? "TRUE" : "FALSE";
  }
  
@@ -152,7 +152,7 @@
  
  #define RSN_SUITE "%02x-%02x-%02x-%d"
  #define RSN_SUITE_ARG(s) \
-@@ -3917,7 +3918,7 @@ int wpa_get_mib_sta(struct wpa_state_mac
+@@ -3916,7 +3917,7 @@ int wpa_get_mib_sta(struct wpa_state_mac
  
  	return len;
  }

package/network/services/hostapd/patches/390-wpa_ie_cap_workaround.patch

@@ -1,6 +1,6 @@
 --- a/src/common/wpa_common.c
 +++ b/src/common/wpa_common.c
-@@ -1847,6 +1847,31 @@ u32 wpa_akm_to_suite(int akm)
+@@ -1849,6 +1849,31 @@ u32 wpa_akm_to_suite(int akm)
  }
  
  
@@ -32,7 +32,7 @@
  int wpa_compare_rsn_ie(int ft_initial_assoc,
  		       const u8 *ie1, size_t ie1len,
  		       const u8 *ie2, size_t ie2len)
-@@ -1854,8 +1879,19 @@ int wpa_compare_rsn_ie(int ft_initial_as
+@@ -1856,8 +1881,19 @@ int wpa_compare_rsn_ie(int ft_initial_as
  	if (ie1 == NULL || ie2 == NULL)
  		return -1;
  

package/network/services/hostapd/patches/460-wpa_supplicant-add-new-config-params-to-be-used-with.patch

@@ -174,7 +174,7 @@ Signed-hostap: Antonio Quartulli <[email protected]>
  	 * macsec_policy - Determines the policy for MACsec secure session
 --- a/wpa_supplicant/wpa_supplicant.c
 +++ b/wpa_supplicant/wpa_supplicant.c
-@@ -2942,6 +2942,12 @@ static void wpas_start_assoc_cb(struct w
+@@ -2987,6 +2987,12 @@ static void wpas_start_assoc_cb(struct w
  			params.beacon_int = ssid->beacon_int;
  		else
  			params.beacon_int = wpa_s->conf->beacon_int;

package/network/services/hostapd/patches/461-driver_nl80211-use-new-parameters-during-ibss-join.patch

@@ -10,7 +10,7 @@ Signed-hostap: Antonio Quartulli <[email protected]>
 
 --- a/src/drivers/driver_nl80211.c
 +++ b/src/drivers/driver_nl80211.c
-@@ -5091,7 +5091,7 @@ static int wpa_driver_nl80211_ibss(struc
+@@ -5094,7 +5094,7 @@ static int wpa_driver_nl80211_ibss(struc
  				   struct wpa_driver_associate_params *params)
  {
  	struct nl_msg *msg;
@@ -19,7 +19,7 @@ Signed-hostap: Antonio Quartulli <[email protected]>
  	int count = 0;
  
  	wpa_printf(MSG_DEBUG, "nl80211: Join IBSS (ifindex=%d)", drv->ifindex);
-@@ -5118,6 +5118,37 @@ retry:
+@@ -5121,6 +5121,37 @@ retry:
  	    nl80211_put_beacon_int(msg, params->beacon_int))
  		goto fail;
  

package/network/services/hostapd/patches/463-add-mcast_rate-to-11s.patch

@@ -19,17 +19,17 @@ Tested-by: Simon Wunderlich <[email protected]>
 
 --- a/src/drivers/driver.h
 +++ b/src/drivers/driver.h
-@@ -1394,6 +1394,7 @@ struct wpa_driver_mesh_join_params {
- #define WPA_DRIVER_MESH_FLAG_SAE_AUTH	0x00000004
+@@ -1395,6 +1395,7 @@ struct wpa_driver_mesh_join_params {
  #define WPA_DRIVER_MESH_FLAG_AMPE	0x00000008
  	unsigned int flags;
+ 	u8 handle_dfs;
 +	int mcast_rate;
  };
  
  /**
 --- a/src/drivers/driver_nl80211.c
 +++ b/src/drivers/driver_nl80211.c
-@@ -9210,6 +9210,18 @@ static int nl80211_put_mesh_id(struct nl
+@@ -9217,6 +9217,18 @@ static int nl80211_put_mesh_id(struct nl
  }
  
  
@@ -48,7 +48,7 @@ Tested-by: Simon Wunderlich <[email protected]>
  static int nl80211_put_mesh_config(struct nl_msg *msg,
  				   struct wpa_driver_mesh_bss_params *params)
  {
-@@ -9268,6 +9280,7 @@ static int nl80211_join_mesh(struct i802
+@@ -9275,6 +9287,7 @@ static int nl80211_join_mesh(struct i802
  	    nl80211_put_basic_rates(msg, params->basic_rates) ||
  	    nl80211_put_mesh_id(msg, params->meshid, params->meshid_len) ||
  	    nl80211_put_beacon_int(msg, params->beacon_int) ||
@@ -58,11 +58,11 @@ Tested-by: Simon Wunderlich <[email protected]>
  
 --- a/wpa_supplicant/mesh.c
 +++ b/wpa_supplicant/mesh.c
-@@ -379,6 +379,7 @@ int wpa_supplicant_join_mesh(struct wpa_
- 	os_memset(&params, 0, sizeof(params));
- 	params.meshid = ssid->ssid;
- 	params.meshid_len = ssid->ssid_len;
-+	params.mcast_rate = ssid->mcast_rate;
- 	ibss_mesh_setup_freq(wpa_s, ssid, &params.freq);
- 	wpa_s->mesh_ht_enabled = !!params.freq.ht_enabled;
- 	wpa_s->mesh_vht_enabled = !!params.freq.vht_enabled;
+@@ -448,6 +448,7 @@ int wpa_supplicant_join_mesh(struct wpa_
+ 
+ 	params->meshid = ssid->ssid;
+ 	params->meshid_len = ssid->ssid_len;
++	params->mcast_rate = ssid->mcast_rate;
+ 	ibss_mesh_setup_freq(wpa_s, ssid, &params->freq);
+ 	wpa_s->mesh_ht_enabled = !!params->freq.ht_enabled;
+ 	wpa_s->mesh_vht_enabled = !!params->freq.vht_enabled;

package/network/services/hostapd/patches/464-fix-mesh-obss-check.patch

@@ -1,6 +1,6 @@
 --- a/wpa_supplicant/wpa_supplicant.c
 +++ b/wpa_supplicant/wpa_supplicant.c
-@@ -2081,11 +2081,13 @@ void ibss_mesh_setup_freq(struct wpa_sup
+@@ -2095,11 +2095,13 @@ void ibss_mesh_setup_freq(struct wpa_sup
  	for (j = 0; j < wpa_s->last_scan_res_used; j++) {
  		struct wpa_bss *bss = wpa_s->last_scan_res[j];
  

package/network/services/hostapd/patches/600-ubus_support.patch

@@ -49,7 +49,7 @@
  struct hostapd_iface * hostapd_alloc_iface(void);
 --- a/src/ap/hostapd.c
 +++ b/src/ap/hostapd.c
-@@ -309,6 +309,7 @@ static void hostapd_free_hapd_data(struc
+@@ -312,6 +312,7 @@ static void hostapd_free_hapd_data(struc
  	hapd->started = 0;
  
  	wpa_printf(MSG_DEBUG, "%s(%s)", __func__, hapd->conf->iface);
@@ -57,7 +57,7 @@
  	iapp_deinit(hapd->iapp);
  	hapd->iapp = NULL;
  	accounting_deinit(hapd);
-@@ -1186,6 +1187,8 @@ static int hostapd_setup_bss(struct host
+@@ -1189,6 +1190,8 @@ static int hostapd_setup_bss(struct host
  	if (hapd->driver && hapd->driver->set_operstate)
  		hapd->driver->set_operstate(hapd->drv_priv, 1);
  
@@ -66,7 +66,7 @@
  	return 0;
  }
  
-@@ -1600,7 +1603,7 @@ static enum nr_chan_width hostapd_get_nr
+@@ -1603,7 +1606,7 @@ static enum nr_chan_width hostapd_get_nr
  #endif /* NEED_AP_MLME */
  
  
@@ -75,7 +75,7 @@
  {
  #ifdef NEED_AP_MLME
  	u16 capab = hostapd_own_capab_info(hapd);
-@@ -1807,6 +1810,7 @@ static int hostapd_setup_interface_compl
+@@ -1810,6 +1813,7 @@ static int hostapd_setup_interface_compl
  	if (err)
  		goto fail;
  
@@ -83,7 +83,7 @@
  	wpa_printf(MSG_DEBUG, "Completing interface initialization");
  	if (iface->conf->channel) {
  #ifdef NEED_AP_MLME
-@@ -1987,6 +1991,7 @@ dfs_offload:
+@@ -1990,6 +1994,7 @@ dfs_offload:
  
  fail:
  	wpa_printf(MSG_ERROR, "Interface initialization failed");
@@ -91,7 +91,7 @@
  	hostapd_set_state(iface, HAPD_IFACE_DISABLED);
  	wpa_msg(hapd->msg_ctx, MSG_INFO, AP_EVENT_DISABLED);
  #ifdef CONFIG_FST
-@@ -2441,6 +2446,7 @@ void hostapd_interface_deinit_free(struc
+@@ -2444,6 +2449,7 @@ void hostapd_interface_deinit_free(struc
  		   (unsigned int) iface->conf->num_bss);
  	driver = iface->bss[0]->driver;
  	drv_priv = iface->bss[0]->drv_priv;
@@ -101,7 +101,7 @@
  		   __func__, driver, drv_priv);
 --- a/src/ap/ieee802_11.c
 +++ b/src/ap/ieee802_11.c
-@@ -1662,12 +1662,13 @@ ieee802_11_set_radius_info(struct hostap
+@@ -1682,12 +1682,13 @@ ieee802_11_set_radius_info(struct hostap
  
  
  static void handle_auth(struct hostapd_data *hapd,
@@ -117,7 +117,7 @@
  	u16 fc;
  	const u8 *challenge = NULL;
  	u32 session_timeout, acct_interim_interval;
-@@ -1678,6 +1679,11 @@ static void handle_auth(struct hostapd_d
+@@ -1698,6 +1699,11 @@ static void handle_auth(struct hostapd_d
  	char *identity = NULL;
  	char *radius_cui = NULL;
  	u16 seq_ctrl;
@@ -129,7 +129,7 @@
  
  	if (len < IEEE80211_HDRLEN + sizeof(mgmt->u.auth)) {
  		wpa_printf(MSG_INFO, "handle_auth - too short payload (len=%lu)",
-@@ -1836,6 +1842,13 @@ static void handle_auth(struct hostapd_d
+@@ -1858,6 +1864,13 @@ static void handle_auth(struct hostapd_d
  		resp = WLAN_STATUS_UNSPECIFIED_FAILURE;
  		goto fail;
  	}
@@ -143,7 +143,7 @@
  	if (res == HOSTAPD_ACL_PENDING)
  		return;
  
-@@ -3102,12 +3115,12 @@ void fils_hlp_timeout(void *eloop_ctx, v
+@@ -3129,12 +3142,12 @@ void fils_hlp_timeout(void *eloop_ctx, v
  
  static void handle_assoc(struct hostapd_data *hapd,
  			 const struct ieee80211_mgmt *mgmt, size_t len,
@@ -158,7 +158,7 @@
  	struct sta_info *sta;
  	u8 *tmp = NULL;
  	struct hostapd_sta_wpa_psk_short *psk = NULL;
-@@ -3116,6 +3129,11 @@ static void handle_assoc(struct hostapd_
+@@ -3143,6 +3156,11 @@ static void handle_assoc(struct hostapd_
  #ifdef CONFIG_FILS
  	int delay_assoc = 0;
  #endif /* CONFIG_FILS */
@@ -170,7 +170,7 @@
  
  	if (len < IEEE80211_HDRLEN + (reassoc ? sizeof(mgmt->u.reassoc_req) :
  				      sizeof(mgmt->u.assoc_req))) {
-@@ -3287,6 +3305,14 @@ static void handle_assoc(struct hostapd_
+@@ -3314,6 +3332,14 @@ static void handle_assoc(struct hostapd_
  	}
  #endif /* CONFIG_MBO */
  
@@ -185,7 +185,7 @@
  	/*
  	 * sta->capability is used in check_assoc_ies() for RRM enabled
  	 * capability element.
-@@ -3500,6 +3526,7 @@ static void handle_disassoc(struct hosta
+@@ -3527,6 +3553,7 @@ static void handle_disassoc(struct hosta
  	wpa_printf(MSG_DEBUG, "disassocation: STA=" MACSTR " reason_code=%d",
  		   MAC2STR(mgmt->sa),
  		   le_to_host16(mgmt->u.disassoc.reason_code));
@@ -193,7 +193,7 @@
  
  	sta = ap_get_sta(hapd, mgmt->sa);
  	if (sta == NULL) {
-@@ -3565,6 +3592,8 @@ static void handle_deauth(struct hostapd
+@@ -3592,6 +3619,8 @@ static void handle_deauth(struct hostapd
  		" reason_code=%d",
  		MAC2STR(mgmt->sa), le_to_host16(mgmt->u.deauth.reason_code));
  
@@ -202,7 +202,7 @@
  	sta = ap_get_sta(hapd, mgmt->sa);
  	if (sta == NULL) {
  		wpa_msg(hapd->msg_ctx, MSG_DEBUG, "Station " MACSTR " trying "
-@@ -3884,7 +3913,7 @@ int ieee802_11_mgmt(struct hostapd_data
+@@ -3911,7 +3940,7 @@ int ieee802_11_mgmt(struct hostapd_data
  
  
  	if (stype == WLAN_FC_STYPE_PROBE_REQ) {
@@ -211,7 +211,7 @@
  		return 1;
  	}
  
-@@ -3904,17 +3933,17 @@ int ieee802_11_mgmt(struct hostapd_data
+@@ -3931,17 +3960,17 @@ int ieee802_11_mgmt(struct hostapd_data
  	switch (stype) {
  	case WLAN_FC_STYPE_AUTH:
  		wpa_printf(MSG_DEBUG, "mgmt::auth");
@@ -341,7 +341,7 @@
  		    hapd->msg_ctx_parent != hapd->msg_ctx)
 --- a/src/ap/wpa_auth_glue.c
 +++ b/src/ap/wpa_auth_glue.c
-@@ -176,6 +176,7 @@ static void hostapd_wpa_auth_psk_failure
+@@ -177,6 +177,7 @@ static void hostapd_wpa_auth_psk_failure
  	struct hostapd_data *hapd = ctx;
  	wpa_msg(hapd->msg_ctx, MSG_INFO, AP_STA_POSSIBLE_PSK_MISMATCH MACSTR,
  		MAC2STR(addr));