mac80211: partly revert force-mac80211 loss detection

This patch will only force mac80211 loss detection upon ath10k by
masking the driver-specific loss-detection bit.

Ref: commit ed816f6ba8b5 ("mac80211: always use mac80211 loss detection")

Signed-off-by: David Bauer <[email protected]>

package/kernel/ath10k-ct/patches/988-ath10k-always-use-mac80211-loss-detection.patch

@@ -0,0 +1,28 @@
+From f7d6edafe4358e3880a26775cfde4cd5c71ba063 Mon Sep 17 00:00:00 2001
+From: David Bauer <[email protected]>
+Date: Wed, 5 Jul 2023 01:30:29 +0200
+Subject: [PATCH] ath10k: always use mac80211 loss detection
+
+ath10k does not report excessive loss in case of broken block-ack
+sessions. The loss is communicated to the host-os, but ath10k does not
+trigger a low-ack events by itself.
+
+The mac80211 framework for loss detection however detects this
+circumstance well in case of ath10k. So use it regardless of ath10k's
+own loss detection mechanism.
+
+Signed-off-by: David Bauer <[email protected]>
+---
+ ath10k-6.2/mac.c | 1 -
+ 1 file changed, 1 deletion(-)
+
+--- a/ath10k-6.2/mac.c
++++ b/ath10k-6.2/mac.c
+@@ -11306,7 +11306,6 @@ int ath10k_mac_register(struct ath10k *a
+ 	ieee80211_hw_set(ar->hw, CHANCTX_STA_CSA);
+ 	ieee80211_hw_set(ar->hw, QUEUE_CONTROL);
+ 	ieee80211_hw_set(ar->hw, SUPPORTS_TX_FRAG);
+-	ieee80211_hw_set(ar->hw, REPORTS_LOW_ACK);
+ 
+ 	if (!test_bit(ATH10K_FLAG_RAW_MODE, &ar->dev_flags))
+ 		ieee80211_hw_set(ar->hw, SW_CRYPTO_CONTROL);

package/kernel/mac80211/patches/ath10k/988-ath10k-always-use-mac80211-loss-detection.patch

@@ -0,0 +1,28 @@
+From f7d6edafe4358e3880a26775cfde4cd5c71ba063 Mon Sep 17 00:00:00 2001
+From: David Bauer <[email protected]>
+Date: Wed, 5 Jul 2023 01:30:29 +0200
+Subject: [PATCH] ath10k: always use mac80211 loss detection
+
+ath10k does not report excessive loss in case of broken block-ack
+sessions. The loss is communicated to the host-os, but ath10k does not
+trigger a low-ack events by itself.
+
+The mac80211 framework for loss detection however detects this
+circumstance well in case of ath10k. So use it regardless of ath10k's
+own loss detection mechanism.
+
+Signed-off-by: David Bauer <[email protected]>
+---
+ drivers/net/wireless/ath/ath10k/mac.c | 1 -
+ 1 file changed, 1 deletion(-)
+
+--- a/drivers/net/wireless/ath/ath10k/mac.c
++++ b/drivers/net/wireless/ath/ath10k/mac.c
+@@ -10080,7 +10080,6 @@ int ath10k_mac_register(struct ath10k *a
+ 	ieee80211_hw_set(ar->hw, CHANCTX_STA_CSA);
+ 	ieee80211_hw_set(ar->hw, QUEUE_CONTROL);
+ 	ieee80211_hw_set(ar->hw, SUPPORTS_TX_FRAG);
+-	ieee80211_hw_set(ar->hw, REPORTS_LOW_ACK);
+ 
+ 	if (!test_bit(ATH10K_FLAG_RAW_MODE, &ar->dev_flags))
+ 		ieee80211_hw_set(ar->hw, SW_CRYPTO_CONTROL);

package/kernel/mac80211/patches/subsys/340-mac80211-always-use-mac80211-loss-detection.patch

@@ -1,36 +0,0 @@
-From cdf461888f900c3a149b10a04d72b4a590ecdec3 Mon Sep 17 00:00:00 2001
-From: David Bauer <[email protected]>
-Date: Tue, 16 May 2023 23:11:32 +0200
-Subject: [PATCH] mac80211: always use mac80211 loss detection
-
-ath10k does not report excessive loss in case of broken block-ack
-sessions. The loss is communicated to the host-os, but ath10k does not
-trigger a low-ack events by itself.
-
-The mac80211 framework for loss detection however detects this
-circumstance well in case of ath10k. So use it regardless of ath10k's
-own loss detection mechanism.
-
-Patching this in mac80211 does allow this hack to be used with any
-flavor of ath10k/ath11k.
-
-Signed-off-by: David Bauer <[email protected]>
----
- net/mac80211/status.c | 6 ------
- 1 file changed, 6 deletions(-)
-
---- a/net/mac80211/status.c
-+++ b/net/mac80211/status.c
-@@ -794,12 +794,6 @@ static void ieee80211_lost_packet(struct
- 	unsigned long pkt_time = STA_LOST_PKT_TIME;
- 	unsigned int pkt_thr = STA_LOST_PKT_THRESHOLD;
- 
--	/* If driver relies on its own algorithm for station kickout, skip
--	 * mac80211 packet loss mechanism.
--	 */
--	if (ieee80211_hw_check(&sta->local->hw, REPORTS_LOW_ACK))
--		return;
--
- 	/* This packet was aggregated but doesn't carry status info */
- 	if ((info->flags & IEEE80211_TX_CTL_AMPDU) &&
- 	    !(info->flags & IEEE80211_TX_STAT_AMPDU))