bcm4908: backport first 5.18 DTS changes

Signed-off-by: Rafał Miłecki <[email protected]>

target/linux/bcm4908/patches-5.10/036-v5.18-0001-arm64-dts-broadcom-bcm4908-use-proper-TWD-binding.patch

@@ -0,0 +1,47 @@
+From 33826e9c6ba76b265d4e26cb95493fa27ed78974 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <[email protected]>
+Date: Wed, 29 Dec 2021 11:23:14 +0100
+Subject: [PATCH] arm64: dts: broadcom: bcm4908: use proper TWD binding
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Block at <ff800400 0x4c> is a TWD that contains timers, watchdog and
+reset. Actual timers happen to be at block beginning but they only span
+across the first 0x28 registers. It means the old block description was
+incorrect (size 0x3c).
+
+Drop timers binding for now and use documented TWD binding. Timers
+should be properly documented and defined as TWD subnode.
+
+Fixes: 2961f69f151c ("arm64: dts: broadcom: add BCM4908 and Asus GT-AC5300 early DTS files")
+Signed-off-by: Rafał Miłecki <[email protected]>
+Signed-off-by: Florian Fainelli <[email protected]>
+---
+ arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi | 8 ++++----
+ 1 file changed, 4 insertions(+), 4 deletions(-)
+
+--- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
++++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
+@@ -273,9 +273,9 @@
+ 		#size-cells = <1>;
+ 		ranges = <0x00 0x00 0xff800000 0x3000>;
+ 
+-		timer: timer@400 {
+-			compatible = "brcm,bcm6328-timer", "syscon";
+-			reg = <0x400 0x3c>;
++		twd: timer-mfd@400 {
++			compatible = "brcm,bcm4908-twd", "simple-mfd", "syscon";
++			reg = <0x400 0x4c>;
+ 		};
+ 
+ 		gpio0: gpio-controller@500 {
+@@ -330,7 +330,7 @@
+ 
+ 	reboot {
+ 		compatible = "syscon-reboot";
+-		regmap = <&timer>;
++		regmap = <&twd>;
+ 		offset = <0x34>;
+ 		mask = <1>;
+ 	};

target/linux/bcm4908/patches-5.10/036-v5.18-0002-arm64-dts-broadcom-bcm4908-add-pinctrl-binding.patch

@@ -0,0 +1,160 @@
+From 72b1c5da796ec5266f2012c36470e226cb4f09c9 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <[email protected]>
+Date: Thu, 30 Dec 2021 12:05:35 +0100
+Subject: [PATCH] arm64: dts: broadcom: bcm4908: add pinctrl binding
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Describe pinmux block with its maps.
+
+Signed-off-by: Rafał Miłecki <[email protected]>
+Signed-off-by: Florian Fainelli <[email protected]>
+---
+ .../boot/dts/broadcom/bcm4908/bcm4908.dtsi    | 135 ++++++++++++++++++
+ 1 file changed, 135 insertions(+)
+
+--- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
++++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
+@@ -287,6 +287,141 @@
+ 			gpio-controller;
+ 		};
+ 
++		pinctrl@560 {
++			compatible = "brcm,bcm4908-pinctrl";
++			reg = <0x560 0x10>;
++
++			pins_led_0_a: led_0-a-pins {
++				function = "led_0";
++				groups = "led_0_grp_a";
++			};
++
++			pins_led_1_a: led_1-a-pins {
++				function = "led_1";
++				groups = "led_1_grp_a";
++			};
++
++			pins_led_2_a: led_2-a-pins {
++				function = "led_2";
++				groups = "led_2_grp_a";
++			};
++
++			pins_led_3_a: led_3-a-pins {
++				function = "led_3";
++				groups = "led_3_grp_a";
++			};
++
++			pins_led_4_a: led_4-a-pins {
++				function = "led_4";
++				groups = "led_4_grp_a";
++			};
++
++			pins_led_5_a: led_5-a-pins {
++				function = "led_5";
++				groups = "led_5_grp_a";
++			};
++
++			pins_led_6_a: led_6-a-pins {
++				function = "led_6";
++				groups = "led_6_grp_a";
++			};
++
++			pins_led_7_a: led_7-a-pins {
++				function = "led_7";
++				groups = "led_7_grp_a";
++			};
++
++			pins_led_8_a: led_8-a-pins {
++				function = "led_8";
++				groups = "led_8_grp_a";
++			};
++
++			pins_led_9_a: led_9-a-pins {
++				function = "led_9";
++				groups = "led_9_grp_a";
++			};
++
++			pins_led_21_a: led_21-a-pins {
++				function = "led_21";
++				groups = "led_21_grp_a";
++			};
++
++			pins_led_22_a: led_22-a-pins {
++				function = "led_22";
++				groups = "led_22_grp_a";
++			};
++
++			pins_led_26_a: led_26-a-pins {
++				function = "led_26";
++				groups = "led_26_grp_a";
++			};
++
++			pins_led_27_a: led_27-a-pins {
++				function = "led_27";
++				groups = "led_27_grp_a";
++			};
++
++			pins_led_28_a: led_28-a-pins {
++				function = "led_28";
++				groups = "led_28_grp_a";
++			};
++
++			pins_led_29_a: led_29-a-pins {
++				function = "led_29";
++				groups = "led_29_grp_a";
++			};
++
++			pins_led_30_a: led_30-a-pins {
++				function = "led_30";
++				groups = "led_30_grp_a";
++			};
++
++			pins_hs_uart: hs_uart-pins {
++				function = "hs_uart";
++				groups = "hs_uart_grp";
++			};
++
++			pins_i2c_a: i2c-a-pins {
++				function = "i2c";
++				groups = "i2c_grp_a";
++			};
++
++			pins_i2c_b: i2c-b-pins {
++				function = "i2c";
++				groups = "i2c_grp_b";
++			};
++
++			pins_i2s: i2s-pins {
++				function = "i2s";
++				groups = "i2s_grp";
++			};
++
++			pins_nand_ctrl: nand_ctrl-pins {
++				function = "nand_ctrl";
++				groups = "nand_ctrl_grp";
++			};
++
++			pins_nand_data: nand_data-pins {
++				function = "nand_data";
++				groups = "nand_data_grp";
++			};
++
++			pins_emmc_ctrl: emmc_ctrl-pins {
++				function = "emmc_ctrl";
++				groups = "emmc_ctrl_grp";
++			};
++
++			pins_usb0_pwr: usb0_pwr-pins {
++				function = "usb0_pwr";
++				groups = "usb0_pwr_grp";
++			};
++
++			pins_usb1_pwr: usb1_pwr-pins {
++				function = "usb1_pwr";
++				groups = "usb1_pwr_grp";
++			};
++		};
++
+ 		uart0: serial@640 {
+ 			compatible = "brcm,bcm6345-uart";
+ 			reg = <0x640 0x18>;

target/linux/bcm4908/patches-5.10/085-v5.18-0001-dt-bindings-pinctrl-Add-binding-for-BCM4908-pinctrl.patch

@@ -95,7 +95,7 @@ Signed-off-by: Linus Walleij <[email protected]>
 +    };
 --- a/MAINTAINERS
 +++ b/MAINTAINERS
-@@ -3688,6 +3688,13 @@ F:	Documentation/devicetree/bindings/net/brcm,bcm4908-enet.yaml
+@@ -3436,6 +3436,13 @@ F:	Documentation/devicetree/bindings/net
  F:	drivers/net/ethernet/broadcom/bcm4908_enet.*
  F:	drivers/net/ethernet/broadcom/unimac.h
  
@@ -107,5 +107,5 @@ Signed-off-by: Linus Walleij <[email protected]>
 +F:	Documentation/devicetree/bindings/pinctrl/brcm,bcm4908-pinctrl.yaml
 +
  BROADCOM BCM5301X ARM ARCHITECTURE
- M:	Florian Fainelli <[email protected]>
  M:	Hauke Mehrtens <[email protected]>
+ M:	Rafał Miłecki <[email protected]>

target/linux/bcm4908/patches-5.10/301-arm64-dts-broadcom-bcm4908-add-TWD-block.patch

@@ -17,16 +17,10 @@ Signed-off-by: Rafał Miłecki <[email protected]>
 
 --- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
 +++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
-@@ -273,9 +273,18 @@
- 		#size-cells = <1>;
- 		ranges = <0x00 0x00 0xff800000 0x3000>;
- 
--		timer: timer@400 {
--			compatible = "brcm,bcm6328-timer", "syscon";
--			reg = <0x400 0x3c>;
-+		twd: timer-mfd@400 {
-+			compatible = "brcm,bcm4908-twd", "brcm,twd", "simple-mfd", "syscon";
-+			reg = <0x400 0x4c>;
+@@ -276,6 +276,15 @@
+ 		twd: timer-mfd@400 {
+ 			compatible = "brcm,bcm4908-twd", "simple-mfd", "syscon";
+ 			reg = <0x400 0x4c>;
 +			ranges = <0x0 0x400 0x4c>;
 +
 +			#address-cells = <1>;
@@ -39,12 +33,3 @@ Signed-off-by: Rafał Miłecki <[email protected]>
  		};
  
  		gpio0: gpio-controller@500 {
-@@ -330,7 +339,7 @@
- 
- 	reboot {
- 		compatible = "syscon-reboot";
--		regmap = <&timer>;
-+		regmap = <&twd>;
- 		offset = <0x34>;
- 		mask = <1>;
- 	};

target/linux/bcm4908/patches-5.4/036-v5.18-0001-arm64-dts-broadcom-bcm4908-use-proper-TWD-binding.patch

@@ -0,0 +1,47 @@
+From 33826e9c6ba76b265d4e26cb95493fa27ed78974 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <[email protected]>
+Date: Wed, 29 Dec 2021 11:23:14 +0100
+Subject: [PATCH] arm64: dts: broadcom: bcm4908: use proper TWD binding
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Block at <ff800400 0x4c> is a TWD that contains timers, watchdog and
+reset. Actual timers happen to be at block beginning but they only span
+across the first 0x28 registers. It means the old block description was
+incorrect (size 0x3c).
+
+Drop timers binding for now and use documented TWD binding. Timers
+should be properly documented and defined as TWD subnode.
+
+Fixes: 2961f69f151c ("arm64: dts: broadcom: add BCM4908 and Asus GT-AC5300 early DTS files")
+Signed-off-by: Rafał Miłecki <[email protected]>
+Signed-off-by: Florian Fainelli <[email protected]>
+---
+ arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi | 8 ++++----
+ 1 file changed, 4 insertions(+), 4 deletions(-)
+
+--- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
++++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
+@@ -273,9 +273,9 @@
+ 		#size-cells = <1>;
+ 		ranges = <0x00 0x00 0xff800000 0x3000>;
+ 
+-		timer: timer@400 {
+-			compatible = "brcm,bcm6328-timer", "syscon";
+-			reg = <0x400 0x3c>;
++		twd: timer-mfd@400 {
++			compatible = "brcm,bcm4908-twd", "simple-mfd", "syscon";
++			reg = <0x400 0x4c>;
+ 		};
+ 
+ 		gpio0: gpio-controller@500 {
+@@ -330,7 +330,7 @@
+ 
+ 	reboot {
+ 		compatible = "syscon-reboot";
+-		regmap = <&timer>;
++		regmap = <&twd>;
+ 		offset = <0x34>;
+ 		mask = <1>;
+ 	};

target/linux/bcm4908/patches-5.4/036-v5.18-0002-arm64-dts-broadcom-bcm4908-add-pinctrl-binding.patch

@@ -0,0 +1,160 @@
+From 72b1c5da796ec5266f2012c36470e226cb4f09c9 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <[email protected]>
+Date: Thu, 30 Dec 2021 12:05:35 +0100
+Subject: [PATCH] arm64: dts: broadcom: bcm4908: add pinctrl binding
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Describe pinmux block with its maps.
+
+Signed-off-by: Rafał Miłecki <[email protected]>
+Signed-off-by: Florian Fainelli <[email protected]>
+---
+ .../boot/dts/broadcom/bcm4908/bcm4908.dtsi    | 135 ++++++++++++++++++
+ 1 file changed, 135 insertions(+)
+
+--- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
++++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
+@@ -287,6 +287,141 @@
+ 			gpio-controller;
+ 		};
+ 
++		pinctrl@560 {
++			compatible = "brcm,bcm4908-pinctrl";
++			reg = <0x560 0x10>;
++
++			pins_led_0_a: led_0-a-pins {
++				function = "led_0";
++				groups = "led_0_grp_a";
++			};
++
++			pins_led_1_a: led_1-a-pins {
++				function = "led_1";
++				groups = "led_1_grp_a";
++			};
++
++			pins_led_2_a: led_2-a-pins {
++				function = "led_2";
++				groups = "led_2_grp_a";
++			};
++
++			pins_led_3_a: led_3-a-pins {
++				function = "led_3";
++				groups = "led_3_grp_a";
++			};
++
++			pins_led_4_a: led_4-a-pins {
++				function = "led_4";
++				groups = "led_4_grp_a";
++			};
++
++			pins_led_5_a: led_5-a-pins {
++				function = "led_5";
++				groups = "led_5_grp_a";
++			};
++
++			pins_led_6_a: led_6-a-pins {
++				function = "led_6";
++				groups = "led_6_grp_a";
++			};
++
++			pins_led_7_a: led_7-a-pins {
++				function = "led_7";
++				groups = "led_7_grp_a";
++			};
++
++			pins_led_8_a: led_8-a-pins {
++				function = "led_8";
++				groups = "led_8_grp_a";
++			};
++
++			pins_led_9_a: led_9-a-pins {
++				function = "led_9";
++				groups = "led_9_grp_a";
++			};
++
++			pins_led_21_a: led_21-a-pins {
++				function = "led_21";
++				groups = "led_21_grp_a";
++			};
++
++			pins_led_22_a: led_22-a-pins {
++				function = "led_22";
++				groups = "led_22_grp_a";
++			};
++
++			pins_led_26_a: led_26-a-pins {
++				function = "led_26";
++				groups = "led_26_grp_a";
++			};
++
++			pins_led_27_a: led_27-a-pins {
++				function = "led_27";
++				groups = "led_27_grp_a";
++			};
++
++			pins_led_28_a: led_28-a-pins {
++				function = "led_28";
++				groups = "led_28_grp_a";
++			};
++
++			pins_led_29_a: led_29-a-pins {
++				function = "led_29";
++				groups = "led_29_grp_a";
++			};
++
++			pins_led_30_a: led_30-a-pins {
++				function = "led_30";
++				groups = "led_30_grp_a";
++			};
++
++			pins_hs_uart: hs_uart-pins {
++				function = "hs_uart";
++				groups = "hs_uart_grp";
++			};
++
++			pins_i2c_a: i2c-a-pins {
++				function = "i2c";
++				groups = "i2c_grp_a";
++			};
++
++			pins_i2c_b: i2c-b-pins {
++				function = "i2c";
++				groups = "i2c_grp_b";
++			};
++
++			pins_i2s: i2s-pins {
++				function = "i2s";
++				groups = "i2s_grp";
++			};
++
++			pins_nand_ctrl: nand_ctrl-pins {
++				function = "nand_ctrl";
++				groups = "nand_ctrl_grp";
++			};
++
++			pins_nand_data: nand_data-pins {
++				function = "nand_data";
++				groups = "nand_data_grp";
++			};
++
++			pins_emmc_ctrl: emmc_ctrl-pins {
++				function = "emmc_ctrl";
++				groups = "emmc_ctrl_grp";
++			};
++
++			pins_usb0_pwr: usb0_pwr-pins {
++				function = "usb0_pwr";
++				groups = "usb0_pwr_grp";
++			};
++
++			pins_usb1_pwr: usb1_pwr-pins {
++				function = "usb1_pwr";
++				groups = "usb1_pwr_grp";
++			};
++		};
++
+ 		uart0: serial@640 {
+ 			compatible = "brcm,bcm6345-uart";
+ 			reg = <0x640 0x18>;

target/linux/bcm4908/patches-5.4/301-arm64-dts-broadcom-bcm4908-add-TWD-block.patch

@@ -17,16 +17,10 @@ Signed-off-by: Rafał Miłecki <[email protected]>
 
 --- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
 +++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
-@@ -273,9 +273,18 @@
- 		#size-cells = <1>;
- 		ranges = <0x00 0x00 0xff800000 0x3000>;
- 
--		timer: timer@400 {
--			compatible = "brcm,bcm6328-timer", "syscon";
--			reg = <0x400 0x3c>;
-+		twd: timer-mfd@400 {
-+			compatible = "brcm,bcm4908-twd", "brcm,twd", "simple-mfd", "syscon";
-+			reg = <0x400 0x4c>;
+@@ -276,6 +276,15 @@
+ 		twd: timer-mfd@400 {
+ 			compatible = "brcm,bcm4908-twd", "simple-mfd", "syscon";
+ 			reg = <0x400 0x4c>;
 +			ranges = <0x0 0x400 0x4c>;
 +
 +			#address-cells = <1>;
@@ -39,12 +33,3 @@ Signed-off-by: Rafał Miłecki <[email protected]>
  		};
  
  		gpio0: gpio-controller@500 {
-@@ -330,7 +339,7 @@
- 
- 	reboot {
- 		compatible = "syscon-reboot";
--		regmap = <&timer>;
-+		regmap = <&twd>;
- 		offset = <0x34>;
- 		mask = <1>;
- 	};