bcm53xx: use SPROM driver queued for 4.6

Signed-off-by: Rafał Miłecki <[email protected]>

SVN-Revision: 48935

target/linux/bcm53xx/files-4.1/drivers/firmware/broadcom/Kconfig

@@ -9,3 +9,14 @@ config BCM47XX_NVRAM
 	  This driver provides an easy way to get value of requested parameter.
 	  It simply reads content of NVRAM and parses it. It doesn't control any
 	  hardware part itself.
+
+config BCM47XX_SPROM
+	bool "Broadcom SPROM driver"
+	depends on BCM47XX_NVRAM
+	help
+	  Broadcom devices store configuration data in SPROM. Accessing it is
+	  specific to the bus host type, e.g. PCI(e) devices have it mapped in
+	  a PCI BAR.
+	  In case of SoC devices SPROM content is stored on a flash used by
+	  bootloader firmware CFE. This driver provides method to ssb and bcma
+	  drivers to read SPROM on SoC.

target/linux/bcm53xx/files-4.1/drivers/firmware/broadcom/Makefile

@@ -1 +1,2 @@
 obj-$(CONFIG_BCM47XX_NVRAM)		+= bcm47xx_nvram.o
+obj-$(CONFIG_BCM47XX_SPROM)		+= bcm47xx_sprom.o

target/linux/bcm53xx/files/drivers/misc/bcm47xx-sprom.c → target/linux/bcm53xx/files/drivers/firmware/broadcom/bcm47xx_sprom.c

@@ -26,20 +26,11 @@
  *  675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
-#include <linux/types.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/of_address.h>
-#include <linux/device.h>
-#include <linux/platform_device.h>
-#include <linux/of_platform.h>
-#include <linux/io.h>
-#include <linux/ssb/ssb.h>
-#include <linux/bcma/bcma.h>
 #include <linux/bcm47xx_nvram.h>
-#include <linux/if_ether.h>
+#include <linux/bcma/bcma.h>
 #include <linux/etherdevice.h>
+#include <linux/if_ether.h>
+#include <linux/ssb/ssb.h>
 
 static void create_key(const char *prefix, const char *postfix,
 		       const char *name, char *buf, int len)
@@ -71,9 +62,9 @@ static int get_nvram_var(const char *prefix, const char *postfix,
 }
 
 #define NVRAM_READ_VAL(type)						\
-static void nvram_read_ ## type (const char *prefix,			\
-				 const char *postfix, const char *name, \
-				 type *val, type allset, bool fallback) \
+static void nvram_read_ ## type(const char *prefix,			\
+				const char *postfix, const char *name,	\
+				type *val, type allset, bool fallback)	\
 {									\
 	char buf[100];							\
 	int err;							\
@@ -433,7 +424,10 @@ static void bcm47xx_fill_sprom_path_r4589(struct ssb_sprom *sprom,
 	int i;
 
 	for (i = 0; i < ARRAY_SIZE(sprom->core_pwr_info); i++) {
-		struct ssb_sprom_core_pwr_info *pwr_info = &sprom->core_pwr_info[i];
+		struct ssb_sprom_core_pwr_info *pwr_info;
+
+		pwr_info = &sprom->core_pwr_info[i];
+
 		snprintf(postfix, sizeof(postfix), "%i", i);
 		nvram_read_u8(prefix, postfix, "maxp2ga",
 			      &pwr_info->maxpwr_2g, 0, fallback);
@@ -481,7 +475,10 @@ static void bcm47xx_fill_sprom_path_r45(struct ssb_sprom *sprom,
 	int i;
 
 	for (i = 0; i < ARRAY_SIZE(sprom->core_pwr_info); i++) {
-		struct ssb_sprom_core_pwr_info *pwr_info = &sprom->core_pwr_info[i];
+		struct ssb_sprom_core_pwr_info *pwr_info;
+
+		pwr_info = &sprom->core_pwr_info[i];
+
 		snprintf(postfix, sizeof(postfix), "%i", i);
 		nvram_read_u16(prefix, postfix, "pa2gw3a",
 			       &pwr_info->pa_2g[3], 0, fallback);
@@ -546,10 +543,11 @@ static void bcm47xx_fill_sprom_ethernet(struct ssb_sprom *sprom,
 	nvram_read_macaddr(prefix, "il0macaddr", sprom->il0mac, fallback);
 
 	/* The address prefix 00:90:4C is used by Broadcom in their initial
-	   configuration. When a mac address with the prefix 00:90:4C is used
-	   all devices from the same series are sharing the same mac address.
-	   To prevent mac address collisions we replace them with a mac address
-	   based on the base address. */
+	 * configuration. When a mac address with the prefix 00:90:4C is used
+	 * all devices from the same series are sharing the same mac address.
+	 * To prevent mac address collisions we replace them with a mac address
+	 * based on the base address.
+	 */
 	if (!bcm47xx_is_valid_mac(sprom->il0mac)) {
 		u8 mac[6];
 
@@ -603,6 +601,30 @@ void bcm47xx_fill_sprom(struct ssb_sprom *sprom, const char *prefix,
 	bcm47xx_sprom_fill_auto(sprom, prefix, fallback);
 }
 
+#if defined(CONFIG_SSB_SPROM)
+static int bcm47xx_get_sprom_ssb(struct ssb_bus *bus, struct ssb_sprom *out)
+{
+	char prefix[10];
+
+	switch (bus->bustype) {
+	case SSB_BUSTYPE_SSB:
+		bcm47xx_fill_sprom(out, NULL, false);
+		return 0;
+	case SSB_BUSTYPE_PCI:
+		memset(out, 0, sizeof(struct ssb_sprom));
+		snprintf(prefix, sizeof(prefix), "pci/%u/%u/",
+			 bus->host_pci->bus->number + 1,
+			 PCI_SLOT(bus->host_pci->devfn));
+		bcm47xx_fill_sprom(out, prefix, false);
+		return 0;
+	default:
+		pr_warn("Unable to fill SPROM for given bustype.\n");
+		return -EINVAL;
+	}
+}
+#endif
+
+#if defined(CONFIG_BCMA)
 /*
  * Having many NVRAM entries for PCI devices led to repeating prefixes like
  * pci/1/1/ all the time and wasting flash space. So at some point Broadcom
@@ -618,6 +640,7 @@ static void bcm47xx_sprom_apply_prefix_alias(char *prefix, size_t prefix_size)
 	char buf[20];
 	int i;
 
+	/* Passed prefix has to end with a slash */
 	if (prefix_len <= 0 || prefix[prefix_len - 1] != '/')
 		return;
 
@@ -634,58 +657,81 @@ static void bcm47xx_sprom_apply_prefix_alias(char *prefix, size_t prefix_size)
 	}
 }
 
-/*
- * This function has to be called in a very precise moment. It has to be done:
- * 1) After bcma registers flash cores, so we can read NVRAM.
- * 2) Before any code needs SPROM content.
- *
- * This can be achieved only by using bcma callback.
- */
-static int bcm47xx_sprom_init(struct bcma_bus *bus, struct ssb_sprom *out)
+static int bcm47xx_get_sprom_bcma(struct bcma_bus *bus, struct ssb_sprom *out)
 {
-	char prefix[20];
+	struct bcma_boardinfo *binfo = &bus->boardinfo;
+	struct bcma_device *core;
+	char buf[10];
+	char *prefix;
+	bool fallback = false;
 
 	switch (bus->hosttype) {
 	case BCMA_HOSTTYPE_PCI:
-		snprintf(prefix, sizeof(prefix), "pci/%u/%u/",
-			 pci_domain_nr(bus->host_pci->bus) + 1,
-			 bus->host_pci->bus->number);
-		bcm47xx_sprom_apply_prefix_alias(prefix, sizeof(prefix));
-		bcm47xx_fill_sprom(out, prefix, false);
+		memset(out, 0, sizeof(struct ssb_sprom));
+		/* On BCM47XX all PCI buses share the same domain */
+		if (config_enabled(CONFIG_BCM47XX))
+			snprintf(buf, sizeof(buf), "pci/%u/%u/",
+				 bus->host_pci->bus->number + 1,
+				 PCI_SLOT(bus->host_pci->devfn));
+		else
+			snprintf(buf, sizeof(buf), "pci/%u/%u/",
+				 pci_domain_nr(bus->host_pci->bus) + 1,
+				 bus->host_pci->bus->number);
+		bcm47xx_sprom_apply_prefix_alias(buf, sizeof(buf));
+		prefix = buf;
 		break;
 	case BCMA_HOSTTYPE_SOC:
-		bcm47xx_fill_sprom(out, NULL, false);
+		memset(out, 0, sizeof(struct ssb_sprom));
+		core = bcma_find_core(bus, BCMA_CORE_80211);
+		if (core) {
+			snprintf(buf, sizeof(buf), "sb/%u/",
+				 core->core_index);
+			prefix = buf;
+			fallback = true;
+		} else {
+			prefix = NULL;
+		}
 		break;
 	default:
-		pr_err("Unable to fill SPROM for given hosttype.\n");
+		pr_warn("Unable to fill SPROM for given bustype.\n");
 		return -EINVAL;
 	}
 
+	nvram_read_u16(prefix, NULL, "boardvendor", &binfo->vendor, 0, true);
+	if (!binfo->vendor)
+		binfo->vendor = SSB_BOARDVENDOR_BCM;
+	nvram_read_u16(prefix, NULL, "boardtype", &binfo->type, 0, true);
+
+	bcm47xx_fill_sprom(out, prefix, fallback);
+
 	return 0;
-};
+}
+#endif
+
+static unsigned int bcm47xx_sprom_registered;
 
-static int bcm47xx_sprom_probe(struct platform_device *pdev)
+/*
+ * On bcm47xx we need to register SPROM fallback handler very early, so we can't
+ * use anything like platform device / driver for this.
+ */
+int bcm47xx_sprom_register_fallbacks(void)
 {
-	return bcma_arch_register_fallback_sprom(&bcm47xx_sprom_init);
+	if (bcm47xx_sprom_registered)
+		return 0;
+
+#if defined(CONFIG_SSB_SPROM)
+	if (ssb_arch_register_fallback_sprom(&bcm47xx_get_sprom_ssb))
+		pr_warn("Failed to registered ssb SPROM handler\n");
+#endif
+
+#if defined(CONFIG_BCMA)
+	if (bcma_arch_register_fallback_sprom(&bcm47xx_get_sprom_bcma))
+		pr_warn("Failed to registered bcma SPROM handler\n");
+#endif
+
+	bcm47xx_sprom_registered = 1;
+
+	return 0;
 }
 
-static const struct of_device_id bcm47xx_sprom_of_match_table[] = {
-	{ .compatible = "brcm,bcm47xx-sprom", },
-	{},
-};
-MODULE_DEVICE_TABLE(of, bcm47xx_sprom_of_match_table);
-
-static struct platform_driver bcm47xx_sprom_driver = {
-	.driver = {
-		.owner = THIS_MODULE,
-		.name = "bcm47xx-sprom",
-		.of_match_table = bcm47xx_sprom_of_match_table,
-		/* driver unloading/unbinding currently not supported */
-		.suppress_bind_attrs = true,
-	},
-	.probe = bcm47xx_sprom_probe,
-};
-module_platform_driver(bcm47xx_sprom_driver);
-
-MODULE_AUTHOR("Hauke Mehrtens <[email protected]>");
-MODULE_LICENSE("GPL v2");
+fs_initcall(bcm47xx_sprom_register_fallbacks);

target/linux/bcm53xx/patches-4.1/112-bcm53xx-sprom-add-sprom-driver.patch

@@ -1,69 +0,0 @@
-From 4e0ab3269a6d260a41a3673157753147f5f71341 Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <[email protected]>
-Date: Sun, 4 May 2014 13:19:20 +0200
-Subject: [PATCH 03/17] bcm47xx-sprom: add Broadcom sprom parser driver
-
-This driver needs an nvram driver and fetches the sprom values from the
-nvram and provides it to any other driver. The calibration data for the
-wifi chip the mac address and some more board description data is
-stores in the sprom.
-
-This is based on a copy of arch/mips/bcm47xx/sprom.c and my plan is to
-make the bcm47xx MIPS SoCs also use this driver some time later.
-
-Signed-off-by: Hauke Mehrtens <[email protected]>
----
- .../devicetree/bindings/misc/bcm47xx-sprom.txt     |  16 +
- drivers/misc/Kconfig                               |  11 +
- drivers/misc/Makefile                              |   1 +
- drivers/misc/bcm47xx-sprom.c                       | 690 +++++++++++++++++++++
- 4 files changed, 718 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/misc/bcm47xx-sprom.txt
- create mode 100644 drivers/misc/bcm47xx-sprom.c
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/misc/bcm47xx-sprom.txt
-@@ -0,0 +1,16 @@
-+Broadcom bcm47xx/bcm53xx sprom converter
-+
-+This driver provbides an sprom based on a given nvram.
-+
-+Required properties:
-+
-+- compatible : brcm,bcm47xx-sprom
-+
-+- nvram : reference to a nvram driver, e.g. bcm47xx-nvram
-+
-+Example:
-+
-+sprom0: sprom@0 {
-+	compatible = "brcm,bcm47xx-sprom";
-+	nvram = <&nvram0>;
-+};
---- a/drivers/misc/Kconfig
-+++ b/drivers/misc/Kconfig
-@@ -515,6 +515,17 @@ config VEXPRESS_SYSCFG
- 	  bus. System Configuration interface is one of the possible means
- 	  of generating transactions on this bus.
- 
-+config BCM47XX_SPROM
-+	tristate "BCM47XX sprom driver"
-+	help
-+	  This driver parses the sprom from a given nvram which is found on
-+	  Broadcom bcm47xx and bcm53xx SoCs.
-+
-+	  The sprom contains board configuration data like the
-+	  calibration data fro the wifi chips, the mac addresses used
-+	  by the board and many other board configuration data. This
-+	  driver will provide the sprom to bcma.
-+
- source "drivers/misc/c2port/Kconfig"
- source "drivers/misc/eeprom/Kconfig"
- source "drivers/misc/cb710/Kconfig"
---- a/drivers/misc/Makefile
-+++ b/drivers/misc/Makefile
-@@ -56,3 +56,4 @@ obj-$(CONFIG_GENWQE)		+= genwqe/
- obj-$(CONFIG_ECHO)		+= echo/
- obj-$(CONFIG_VEXPRESS_SYSCFG)	+= vexpress-syscfg.o
- obj-$(CONFIG_CXL_BASE)		+= cxl/
-+obj-$(CONFIG_BCM47XX_SPROM)	+= bcm47xx-sprom.o

target/linux/bcm53xx/patches-4.1/301-ARM-BCM5301X-Add-SPROM.patch

@@ -1,26 +0,0 @@
-From d404e0b22356078a51719fa911f6e09cb1a72d80 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <[email protected]>
-Date: Sun, 7 Jun 2015 16:18:18 +0200
-Subject: [PATCH] ARM: BCM5301X: Add SPROM
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Signed-off-by: Rafał Miłecki <[email protected]>
----
- arch/arm/boot/dts/bcm5301x.dtsi | 4 ++++
- 1 file changed, 4 insertions(+)
-
---- a/arch/arm/boot/dts/bcm5301x.dtsi
-+++ b/arch/arm/boot/dts/bcm5301x.dtsi
-@@ -105,6 +105,10 @@
- 		};
- 	};
- 
-+	sprom0: sprom@0 {
-+		compatible = "brcm,bcm47xx-sprom";
-+	};
-+
- 	axi@18000000 {
- 		compatible = "brcm,bus-axi";
- 		reg = <0x18000000 0x1000>;

target/linux/bcm53xx/patches-4.4/112-bcm53xx-sprom-add-sprom-driver.patch

@@ -21,49 +21,25 @@ Signed-off-by: Hauke Mehrtens <[email protected]>
  create mode 100644 Documentation/devicetree/bindings/misc/bcm47xx-sprom.txt
  create mode 100644 drivers/misc/bcm47xx-sprom.c
 
---- /dev/null
-+++ b/Documentation/devicetree/bindings/misc/bcm47xx-sprom.txt
-@@ -0,0 +1,16 @@
-+Broadcom bcm47xx/bcm53xx sprom converter
+--- a/drivers/firmware/broadcom/Kconfig
++++ b/drivers/firmware/broadcom/Kconfig
+@@ -9,3 +9,14 @@ config BCM47XX_NVRAM
+ 	  This driver provides an easy way to get value of requested parameter.
+ 	  It simply reads content of NVRAM and parses it. It doesn't control any
+ 	  hardware part itself.
 +
-+This driver provbides an sprom based on a given nvram.
-+
-+Required properties:
-+
-+- compatible : brcm,bcm47xx-sprom
-+
-+- nvram : reference to a nvram driver, e.g. bcm47xx-nvram
-+
-+Example:
-+
-+sprom0: sprom@0 {
-+	compatible = "brcm,bcm47xx-sprom";
-+	nvram = <&nvram0>;
-+};
---- a/drivers/misc/Kconfig
-+++ b/drivers/misc/Kconfig
-@@ -525,6 +525,17 @@ config VEXPRESS_SYSCFG
- 	  bus. System Configuration interface is one of the possible means
- 	  of generating transactions on this bus.
- 
 +config BCM47XX_SPROM
-+	tristate "BCM47XX sprom driver"
++	bool "Broadcom SPROM driver"
++	depends on BCM47XX_NVRAM
 +	help
-+	  This driver parses the sprom from a given nvram which is found on
-+	  Broadcom bcm47xx and bcm53xx SoCs.
-+
-+	  The sprom contains board configuration data like the
-+	  calibration data fro the wifi chips, the mac addresses used
-+	  by the board and many other board configuration data. This
-+	  driver will provide the sprom to bcma.
-+
- source "drivers/misc/c2port/Kconfig"
- source "drivers/misc/eeprom/Kconfig"
- source "drivers/misc/cb710/Kconfig"
---- a/drivers/misc/Makefile
-+++ b/drivers/misc/Makefile
-@@ -56,3 +56,4 @@ obj-$(CONFIG_GENWQE)		+= genwqe/
- obj-$(CONFIG_ECHO)		+= echo/
- obj-$(CONFIG_VEXPRESS_SYSCFG)	+= vexpress-syscfg.o
- obj-$(CONFIG_CXL_BASE)		+= cxl/
-+obj-$(CONFIG_BCM47XX_SPROM)	+= bcm47xx-sprom.o
++	  Broadcom devices store configuration data in SPROM. Accessing it is
++	  specific to the bus host type, e.g. PCI(e) devices have it mapped in
++	  a PCI BAR.
++	  In case of SoC devices SPROM content is stored on a flash used by
++	  bootloader firmware CFE. This driver provides method to ssb and bcma
++	  drivers to read SPROM on SoC.
+--- a/drivers/firmware/broadcom/Makefile
++++ b/drivers/firmware/broadcom/Makefile
+@@ -1 +1,2 @@
+ obj-$(CONFIG_BCM47XX_NVRAM)		+= bcm47xx_nvram.o
++obj-$(CONFIG_BCM47XX_SPROM)		+= bcm47xx_sprom.o

target/linux/bcm53xx/patches-4.4/301-ARM-BCM5301X-Add-SPROM.patch

@@ -1,26 +0,0 @@
-From d404e0b22356078a51719fa911f6e09cb1a72d80 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <[email protected]>
-Date: Sun, 7 Jun 2015 16:18:18 +0200
-Subject: [PATCH] ARM: BCM5301X: Add SPROM
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Signed-off-by: Rafał Miłecki <[email protected]>
----
- arch/arm/boot/dts/bcm5301x.dtsi | 4 ++++
- 1 file changed, 4 insertions(+)
-
---- a/arch/arm/boot/dts/bcm5301x.dtsi
-+++ b/arch/arm/boot/dts/bcm5301x.dtsi
-@@ -136,6 +136,10 @@
- 		};
- 	};
- 
-+	sprom0: sprom@0 {
-+		compatible = "brcm,bcm47xx-sprom";
-+	};
-+
- 	axi@18000000 {
- 		compatible = "brcm,bus-axi";
- 		reg = <0x18000000 0x1000>;