ath79: drop phy-mask property

The phy-mask property is no longer supported by the ag71xx-mdio driver,
so let's drop it.

Signed-off-by: Sander Vanheule <[email protected]>

target/linux/ath79/dts/ar7161_adtran_bsap1880.dtsi

@@ -58,8 +58,6 @@
 &mdio0 {
 	status = "okay";
 
-	phy-mask = <0x1>;
-
 	phy0: ethernet-phy@0 {
 		reg = <0>;
 	};

target/linux/ath79/dts/ar7161_aruba_ap-105.dts

@@ -125,8 +125,6 @@
 &mdio0 {
 	status = "okay";
 
-	phy-mask = <0x1>;
-
 	phy0: ethernet-phy@0 {
 		reg = <0>;
 	};

target/linux/ath79/dts/ar7161_dlink_dir-825-b1.dts

@@ -103,8 +103,6 @@
 			#size-cells = <0>;
 			status = "okay";
 
-			phy-mask = <0x10>;
-
 			phy4: ethernet-phy@4 {
 				reg = <4>;
 				phy-mode = "rgmii";

target/linux/ath79/dts/ar7161_jjplus_ja76pf2.dts

@@ -73,8 +73,6 @@
 &mdio0 {
 	status = "okay";
 
-	phy-mask = <0x1>;
-
 	phy0: ethernet-phy@0 {
 		reg = <0>;
 		phy-mode = "rgmii";

target/linux/ath79/dts/ar7161_meraki_mr16.dts

@@ -107,8 +107,6 @@
 &mdio0 {
 	status = "okay";
 
-	phy-mask = <0x1>;
-
 	phy0: ethernet-phy@0 {
 		reg = <0>;
 	};

target/linux/ath79/dts/ar7161_netgear_wndap360.dts

@@ -62,7 +62,6 @@
 &mdio0 {
 	status = "okay";
 
-	phy-mask = <0x0f>;
 	phy1: ethernet-phy@1 {
 		reg = <0x1>;
 	};

target/linux/ath79/dts/ar7161_netgear_wndr.dtsi

@@ -110,8 +110,6 @@
 			#size-cells = <0>;
 			status = "okay";
 
-			phy-mask = <0x10>;
-
 			phy4: ethernet-phy@4 {
 				reg = <4>;
 				phy-mode = "rgmii";

target/linux/ath79/dts/ar7242_buffalo_wzr-bhr.dtsi

@@ -123,8 +123,6 @@
 &mdio0 {
 	status = "okay";
 
-	phy-mask = <0x1>;
-
 	phy0: ethernet-phy@0 {
 		reg = <0>;
 		phy-mode = "rgmii";

target/linux/ath79/dts/ar7242_buffalo_wzr-hp-g302h-a1a0.dts

@@ -179,8 +179,6 @@
 &mdio0 {
 	status = "okay";
 
-	phy-mask = <0x1>;
-
 	phy0: ethernet-phy@0 {
 		reg = <0>;
 		phy-mode = "rgmii";

target/linux/ath79/dts/ar7242_ubnt_edgeswitch-8xp.dts

@@ -110,8 +110,6 @@
 &mdio0 {
 	status = "okay";
 
-	phy-mask = <0x10>;
-
 	ethernet-switch@1e {
 		compatible = "brcm,bcm53128";
 		reg = <0x1e>;

target/linux/ath79/dts/ar9132_buffalo_wzr-hp-g300nh.dtsi

@@ -191,7 +191,6 @@
 
 			#address-cells = <1>;
 			#size-cells = <0>;
-			phy-mask = <0x10>;
 
 			phy4: ethernet-phy@4 {
 				reg = <4>;

target/linux/ath79/dts/ar9342_mikrotik_routerboard-912uag-2hpnd.dts

@@ -200,8 +200,6 @@
 &mdio0 {
 	status = "okay";
 
-	phy-mask = <0>;
-
 	phy0: ethernet-phy@0 {
 		reg = <0>;
 	};

target/linux/ath79/dts/ar9342_ubnt_aircube-ac.dts

@@ -78,7 +78,6 @@
 &mdio0 {
 	status = "okay";
 
-	phy-mask = <4>;
 	phy0: ethernet-phy@0 {
 		phy-mode = "rgmii";
 		reg = <0>;

target/linux/ath79/dts/ar9342_ubnt_bullet-m-xw.dts

@@ -10,7 +10,6 @@
 &mdio0 {
 	status = "okay";
 
-	phy-mask = <4>;
 	phy4: ethernet-phy@4 {
 		phy-mode = "rgmii";
 		reg = <4>;

target/linux/ath79/dts/ar9342_ubnt_nanobeam-m5-xw.dts

@@ -10,8 +10,6 @@
 &mdio0 {
 	status = "okay";
 
-	phy-mask = <0x1>;
-
 	phy1: ethernet-phy@1 {
 		reg = <1>;
 		phy-mode = "mii";

target/linux/ath79/dts/ar9342_ubnt_nanostation-loco-m-xw.dts

@@ -10,8 +10,6 @@
 &mdio0 {
 	status = "okay";
 
-	phy-mask = <0x1>;
-
 	phy1: ethernet-phy@1 {
 		reg = <1>;
 		phy-mode = "mii";

target/linux/ath79/dts/ar9342_ubnt_nanostation-m-xw.dts

@@ -11,7 +11,6 @@
 	status = "okay";
 
 	phy4-mii-enable;
-	phy-mask = <0x23>;
 
 	phy0: ethernet-phy@0 {
 		reg = <0>;

target/linux/ath79/dts/ar9342_ubnt_powerbeam-m2-xw.dts

@@ -10,8 +10,6 @@
 &mdio0 {
 	status = "okay";
 
-	phy-mask = <4>;
-
 	phy1: ethernet-phy@1 {
 		reg = <1>;
 	};

target/linux/ath79/dts/ar9342_ubnt_powerbeam-m5-xw.dts

@@ -10,8 +10,6 @@
 &mdio0 {
 	status = "okay";
 
-	phy-mask = <4>;
-
 	phy4: ethernet-phy@4 {
 		reg = <4>;
 	};

target/linux/ath79/dts/ar9342_ubnt_wa_1port.dtsi

@@ -5,8 +5,6 @@
 &mdio0 {
 	status = "okay";
 
-	phy-mask = <4>;
-
 	phy4: ethernet-phy@4 {
 		reg = <4>;
 	};

target/linux/ath79/dts/ar9342_ubnt_wa_2port.dtsi

@@ -5,8 +5,6 @@
 &mdio0 {
 	status = "okay";
 
-	phy-mask = <4>;
-
 	phy0: ethernet-phy@0 {
 		phy-mode = "rgmii";
 		reg = <0>;

target/linux/ath79/dts/ar9344_atheros_db120.dts

@@ -159,8 +159,6 @@
 &mdio0 {
 	status = "okay";
 
-	phy-mask = <0>;
-
 	phy0: ethernet-phy@0 {
 		reg = <0>;
 

target/linux/ath79/dts/ar9344_compex_wpj344-16m.dts

@@ -116,8 +116,6 @@
 &mdio0 {
 	status = "okay";
 
-	phy-mask = <0>;
-
 	phy0: ethernet-phy@0 {
 		reg = <0>;
 		phy-mode = "rgmii";

target/linux/ath79/dts/ar9344_dlink_dir-8x5.dtsi

@@ -36,8 +36,6 @@
 &mdio0 {
 	status = "okay";
 
-	phy-mask = <0>;
-
 	phy0: ethernet-phy@0 {
 		reg = <0>;
 		qca,ar8327-initvals = <

target/linux/ath79/dts/ar9344_netgear_wndr.dtsi

@@ -192,8 +192,6 @@
 &mdio0 {
 	status = "okay";
 
-	phy-mask = <0>;
-
 	phy0: ethernet-phy@0 {
 		reg = <0>;
 		phy-mode = "rgmii";

target/linux/ath79/dts/ar9344_ocedo_raccoon.dts

@@ -148,8 +148,6 @@
 &mdio0 {
 	status = "okay";
 
-	phy-mask = <0>;
-
 	phy0: ethernet-phy@0 {
 		reg = <0>;
 		eee-broken-100tx;

target/linux/ath79/dts/ar9344_openmesh_mr600.dtsi

@@ -82,8 +82,6 @@
 &mdio0 {
 	status = "okay";
 
-	phy-mask = <0x1>;
-
 	phy0: ethernet-phy@0 {
 		reg = <0>;
 		eee-broken-100tx;

target/linux/ath79/dts/ar9344_openmesh_om5p-an.dts

@@ -160,8 +160,6 @@
 &mdio0 {
 	status = "okay";
 
-	phy-mask = <0x80>;
-
 	phy7: ethernet-phy@7 {
 		reg = <7>;
 		eee-broken-100tx;

target/linux/ath79/dts/ar9344_pcs_cap324.dts

@@ -142,8 +142,6 @@
 &mdio0 {
 	status = "okay";
 
-	phy-mask = <0>;
-
 	phy0: ethernet-phy@0 {
 		reg = <0>;
 		phy-mode = "rgmii";

target/linux/ath79/dts/ar9344_pcs_cr5000.dts

@@ -135,8 +135,6 @@
 &mdio0 {
 	status = "okay";
 
-	phy-mask = <0>;
-
 	phy0: ethernet-phy@0 {
 		reg = <0>;
 		phy-mode = "rgmii";

target/linux/ath79/dts/ar9344_qxwlan_e750g-v8-16m.dts

@@ -10,8 +10,6 @@
 &mdio0 {
 	status = "okay";
 
-	phy-mask = <0>;
-
 	phy0: ethernet-phy@0 {
 		reg = <0>;
 		phy-mode = "rgmii";

target/linux/ath79/dts/ar9344_qxwlan_e750g-v8-8m.dts

@@ -10,8 +10,6 @@
 &mdio0 {
 	status = "okay";
 
-	phy-mask = <0>;
-
 	phy0: ethernet-phy@0 {
 		reg = <0>;
 		phy-mode = "rgmii";

target/linux/ath79/dts/ar9344_tplink_tl-wdr4300.dtsi

@@ -93,8 +93,6 @@
 &mdio0 {
 	status = "okay";
 
-	phy-mask = <0>;
-
 	phy0: ethernet-phy@0 {
 		reg = <0>;
 		phy-mode = "rgmii";

target/linux/ath79/dts/ar9344_wd_mynet-n750.dts

@@ -94,8 +94,6 @@
 &mdio0 {
 	status = "okay";
 
-	phy-mask = <0>;
-
 	switch0@1f {
 		compatible = "qca,ar8327";
 		reg = <0x1f>;

target/linux/ath79/dts/ar9344_wd_mynet-wifi-rangeextender.dts

@@ -134,8 +134,6 @@
 &mdio0 {
 	status = "okay";
 
-	phy-mask = <0x10>;
-
 	phy4: ethernet-phy@4 {
 		reg = <4>;
 	};

target/linux/ath79/dts/ar9344_winchannel_wb2000.dts

@@ -187,8 +187,6 @@
 &mdio0 {
 	status = "okay";
 
-	phy-mask = <0x10>;
-
 	phy4: ethernet-phy@4 {
 		reg = <4>;
 	};

target/linux/ath79/dts/qca9558_dlink_dap-2695-a1.dts

@@ -101,7 +101,6 @@
 &eth1 {
 	status = "okay";
 
-	phy-mask = <0>;
 	pll-data = <0x03000101 0x00000101 0x00001616>;
 
 	fixed-link {

target/linux/ath79/dts/qca9558_openmesh_a60.dtsi

@@ -119,8 +119,6 @@
 &mdio0 {
 	status = "okay";
 
-	phy-mask = <0x6>;
-
 	phy1: ethernet-phy@1 {
 		reg = <1>;
 		eee-broken-100tx;

target/linux/ath79/dts/qca9558_openmesh_mr.dtsi

@@ -127,8 +127,6 @@
 &mdio0 {
 	status = "okay";
 
-	phy-mask = <0x20>;
-
 	phy5: ethernet-phy@5 {
 		reg = <5>;
 		eee-broken-100tx;

target/linux/ath79/dts/qca9558_openmesh_om5p-ac-v1.dts

@@ -138,8 +138,6 @@
 &mdio0 {
 	status = "okay";
 
-	phy-mask = <0x6>;
-
 	phy1: ethernet-phy@1 {
 		reg = <1>;
 		eee-broken-100tx;

target/linux/ath79/dts/qca9558_openmesh_om5p-ac-v2.dts

@@ -168,8 +168,6 @@
 &mdio0 {
 	status = "okay";
 
-	phy-mask = <0x10>;
-
 	phy4: ethernet-phy@4 {
 		reg = <4>;
 		eee-broken-100tx;
@@ -180,8 +178,6 @@
 &mdio1 {
 	status = "okay";
 
-	phy-mask = <0x2>;
-
 	phy1: ethernet-phy@1 {
 		reg = <1>;
 		eee-broken-100tx;

target/linux/ath79/dts/qca9558_sophos_ap.dtsi

@@ -121,8 +121,6 @@
 &mdio0 {
 	status = "okay";
 
-	phy-mask = <0x10>;
-
 	phy4: ethernet-phy@4 {
 		reg = <4>;
 		eee-broken-100tx;

target/linux/ath79/dts/qca9558_ubnt_nanobeam-ac-xc.dts

@@ -81,7 +81,6 @@
 &mdio0 {
 	status = "okay";
 
-	phy-mask = <4>;
 	phy4: ethernet-phy@4 {
 		phy-mode = "sgmii";
 		reg = <4>;

target/linux/ath79/dts/qca9558_ubnt_powerbeam-5ac-500.dts

@@ -21,7 +21,6 @@
 &mdio0 {
 	status = "okay";
 
-	phy-mask = <4>;
 	phy4: ethernet-phy@4 {
 		phy-mode = "sgmii";
 		reg = <4>;

target/linux/ath79/dts/qca9558_ubnt_rocket-5ac-lite.dts

@@ -21,7 +21,6 @@
 &mdio0 {
 	status = "okay";
 
-	phy-mask = <4>;
 	phy4: ethernet-phy@4 {
 		phy-mode = "sgmii";
 		reg = <4>;

target/linux/ath79/dts/qca9563_asus_rp-ac66.dts

@@ -134,8 +134,6 @@
 &mdio0 {
 	status = "okay";
 
-	phy-mask = <0>;
-
 	phy0: ethernet-phy@3 {
 		reg = <0x3>;
 		phy-mode = "sgmii";

target/linux/ath79/dts/qca9563_comfast_cf-e375ac.dts

@@ -104,8 +104,6 @@
 &mdio0 {
 	status = "okay";
 
-	phy-mask = <0>;
-
 	phy0: ethernet-phy@0 {
 		reg = <0>;
 		phy-mode = "sgmii";

target/linux/ath79/dts/qca9563_compex_wpj563.dts

@@ -99,8 +99,6 @@
 &mdio0 {
 	status = "okay";
 
-	phy-mask = <0>;
-
 	phy0: ethernet-phy@0 {
 		reg = <0>;
 		phy-mode = "sgmii";

target/linux/ath79/dts/qca9563_dlink_dir-842-c.dtsi

@@ -121,8 +121,6 @@
 &mdio0 {
 	status = "okay";
 
-	phy-mask = <0>;
-
 	phy0: ethernet-phy@0 {
 		reg = <0>;
 		qca,mib-poll-interval = <500>;

target/linux/ath79/dts/qca9563_dlink_dir-859-a1.dts

@@ -128,8 +128,6 @@
 &mdio0 {
 	status = "okay";
 
-	phy-mask = <0>;
-
 	phy0: ethernet-phy@0 {
 		reg = <0>;
 		phy-mode = "sgmii";

target/linux/ath79/dts/qca9563_glinet_gl-ar750s.dtsi

@@ -139,8 +139,6 @@
 &mdio0 {
 	status = "okay";
 
-	phy-mask = <0>;
-
 	phy0: ethernet-phy@0 {
 		reg = <0>;
 		phy-mode = "sgmii";

target/linux/ath79/dts/qca9563_netgear_wndr.dtsi

@@ -176,8 +176,6 @@
 &mdio0 {
 	status = "okay";
 
-	phy-mask = <0>;
-
 	phy0: ethernet-phy@0 {
 		reg = <0>;
 		phy-mode = "sgmii";

target/linux/ath79/dts/qca9563_phicomm_k2t.dts

@@ -99,8 +99,6 @@
 &mdio0 {
 	status = "okay";
 
-	phy-mask = <0>;
-
 	phy0: ethernet-phy@0 {
 		reg = <0>;
 		phy-mode = "sgmii";

target/linux/ath79/dts/qca9563_qxwlan_e1700ac.dtsi

@@ -96,8 +96,6 @@
 &mdio0 {
 	status = "okay";
 
-	phy-mask = <0>;
-
 	phy0: ethernet-phy@0 {
 		reg = <0>;
 		phy-mode = "sgmii";

target/linux/ath79/dts/qca9563_rosinson_wr818.dts

@@ -92,7 +92,6 @@
 &mdio0 {
 	status = "okay";
 
-	phy-mask = <0>;
 	phy0: ethernet-phy@0 {
 		reg = <0>;
 		phy-mode = "sgmii";

target/linux/ath79/dts/qca9563_tplink_archer-c2-v3.dts

@@ -141,7 +141,6 @@
 &mdio0 {
 	status = "okay";
 
-	phy-mask = <0>;
 	phy0: ethernet-phy@0 {
 		reg = <0>;
 		phy-mode = "sgmii";

target/linux/ath79/dts/qca9563_tplink_archer-c7-v4.dts

@@ -226,8 +226,6 @@
 &mdio0 {
 	status = "okay";
 
-	phy-mask = <0>;
-
 	phy0: ethernet-phy@0 {
 		reg = <0>;
 		phy-mode = "sgmii";

target/linux/ath79/dts/qca9563_tplink_archer-x6-v2.dtsi

@@ -12,8 +12,6 @@
 &mdio0 {
 	status = "okay";
 
-	phy-mask = <0>;
-
 	phy0: ethernet-phy@0 {
 		reg = <0>;
 		phy-mode = "sgmii";

target/linux/ath79/dts/qca9563_tplink_archer-x7-v5.dtsi

@@ -137,8 +137,6 @@
 &mdio0 {
 	status = "okay";
 
-	phy-mask = <0>;
-
 	phy0: ethernet-phy@0 {
 		reg = <0>;
 		phy-mode = "sgmii";

target/linux/ath79/dts/qca9563_tplink_cpe710-v1.dts

@@ -117,8 +117,6 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&mdio_pins>;
 
-	phy-mask = <0x10>;
-
 	phy4: ethernet-phy@4 {
 		reg = <4>;
 		reset-gpios = <&gpio 11 GPIO_ACTIVE_LOW>;

target/linux/ath79/dts/qca9563_tplink_deco-m4r-v1.dts

@@ -57,7 +57,6 @@
 
 &mdio0 {
 	status = "okay";
-	phy-mask = <0>;
 
 	phy0: ethernet-phy@0 {
 		reg = <0>;

target/linux/ath79/dts/qca9563_tplink_eap245-v3.dts

@@ -127,8 +127,6 @@
 &mdio0 {
 	status = "okay";
 
-	phy-mask = <0x1>;
-
 	phy0: ethernet-phy@0 {
 		reg = <0>;
 		phy-mode = "sgmii";

target/linux/ath79/dts/qca9563_tplink_eap2x5-1port.dtsi

@@ -99,8 +99,6 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&mdio_pins>;
 
-	phy-mask = <0x10>;
-
 	phy4: ethernet-phy@4 {
 		reg = <4>;
 		reset-gpios = <&gpio 11 GPIO_ACTIVE_LOW>;

target/linux/ath79/dts/qca9563_tplink_tl-wpa8630.dtsi

@@ -105,8 +105,6 @@
 &mdio0 {
 	status = "okay";
 
-	phy-mask = <0>;
-
 	phy0: ethernet-phy@0 {
 		reg = <0>;
 		phy-mode = "sgmii";

target/linux/ath79/dts/qca9563_tplink_tl-wr1043n.dtsi

@@ -86,7 +86,6 @@
 &mdio0 {
 	status = "okay";
 
-	phy-mask = <0>;
 	phy0: ethernet-phy@0 {
 		reg = <0>;
 		phy-mode = "sgmii";

target/linux/ath79/dts/qca9563_ubnt_unifiac-lite.dtsi

@@ -11,7 +11,6 @@
 &mdio0 {
 	status = "okay";
 
-	phy-mask = <4>;
 	phy4: ethernet-phy@4 {
 		phy-mode = "sgmii";
 		reg = <4>;

target/linux/ath79/dts/qca9563_ubnt_unifiac-pro.dtsi

@@ -10,7 +10,6 @@
 
 &mdio0 {
 	status = "okay";
-	phy-mask = <0>;
 
 	phy0: ethernet-phy@0 {
 		reg = <0>;

target/linux/ath79/dts/qca9563_xiaomi_aiot-ac2350.dts

@@ -135,8 +135,6 @@
 &mdio0 {
 	status = "okay";
 
-	phy-mask = <0x1>;
-
 	phy0: ethernet-phy@0 {
 		reg = <0>;
 		phy-mode = "sgmii";

target/linux/ath79/dts/qca9563_yuncore_xd4200.dtsi

@@ -35,8 +35,6 @@
 &mdio0 {
 	status = "okay";
 
-	phy-mask = <0>;
-
 	phy0: ethernet-phy@0 {
 		reg = <0>;
 		phy-mode = "sgmii";

target/linux/ath79/dts/qca9563_zte_mf286.dtsi

@@ -104,7 +104,6 @@
 &mdio0 {
 	status = "okay";
 
-	phy-mask = <0>;
 	phy0: ethernet-phy@0 {
 		reg = <0>;
 		phy-mode = "sgmii";

target/linux/ath79/dts/qcn5502_tplink_archer-a9-v6.dts

@@ -95,8 +95,6 @@
 &mdio0 {
 	status = "okay";
 
-	phy-mask = <0>;
-
 	phy0: ethernet-phy@0 {
 		reg = <0>;
 		phy-mode = "sgmii";