ath79: add WLAN, Ethernet-Switch with LAN/WAN and Status LED to Dorin

Signed-off-by: Catrinel Catrinescu <[email protected]>

target/linux/ath79/base-files/etc/board.d/02_network

@@ -14,6 +14,11 @@ ath79_setup_interfaces()
 		ucidef_set_interface_lan "eth0"
 		;;
 
+	"embeddedwireless,dorin")
+		ucidef_add_switch "switch0" \
+			"0@eth0" "1:wan" "2:lan:3" "3:lan:2"
+		;;
+
 	"glinet,ar150")
 		ucidef_set_interfaces_lan_wan "eth1" "eth0"
 		;;

target/linux/ath79/base-files/etc/diag.sh

@@ -12,6 +12,9 @@ get_status_led() {
 	"avm,fritz300e")
 		status_led="${boardname}:green:power"
 		;;
+	"embeddedwireless,dorin")
+		status_led="dorin:green:status"
+		;;
 	"glinet,ar150")
 		status_led="gl-ar150:orange:wlan"
 		;;

target/linux/ath79/dts/ar9331_embeddedwireless_dorin.dts

@@ -111,20 +111,21 @@
 	status = "okay";
 
 	mtd-mac-address = <&art 0x1002>;
+	mtd-mac-address-increment = <0x40>;
 
 	fixed-link {
 		speed = <1000>;
 		full-duplex;
 	};
 
-	gmac-config {
-		device = <&gmac>;
-
-		switch-phy-addr-swap = <1>;
-		switch-phy-swap = <1>;
-	};
 };
 
 &mdio1 {
 	status = "okay";
 };
+
+&wmac {
+	status = "okay";
+	mtd-cal-data = <&art 0x1000>;
+	mtd-mac-address = <&art 0x1002>;
+};