kernel/rockchip: Restore kernel files for v6.1

This is an automatically generated commit which aids following Kernel patch history,
as git will see the move and copy as a rename thus defeating the purpose.

See: https://lists.openwrt.org/pipermail/openwrt-devel/2023-October/041673.html
for the original discussion.

Signed-off-by: Antonio Flores <[email protected]>

target/linux/rockchip/armv8/config-6.1

@@ -0,0 +1,709 @@
+CONFIG_64BIT=y
+CONFIG_ARCH_BINFMT_ELF_EXTRA_PHDRS=y
+CONFIG_ARCH_CORRECT_STACKTRACE_ON_KRETPROBE=y
+CONFIG_ARCH_DMA_ADDR_T_64BIT=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_KEEP_MEMBLOCK=y
+CONFIG_ARCH_MHP_MEMMAP_ON_MEMORY_ENABLE=y
+CONFIG_ARCH_MMAP_RND_BITS=18
+CONFIG_ARCH_MMAP_RND_BITS_MAX=33
+CONFIG_ARCH_MMAP_RND_BITS_MIN=18
+CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=11
+CONFIG_ARCH_NR_GPIO=0
+CONFIG_ARCH_PROC_KCORE_TEXT=y
+CONFIG_ARCH_ROCKCHIP=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_STACKWALK=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_ARCH_WANTS_NO_INSTR=y
+CONFIG_ARCH_WANTS_THP_SWAP=y
+CONFIG_ARC_EMAC_CORE=y
+CONFIG_ARM64=y
+CONFIG_ARM64_4K_PAGES=y
+CONFIG_ARM64_CNP=y
+CONFIG_ARM64_EPAN=y
+CONFIG_ARM64_ERRATUM_2051678=y
+CONFIG_ARM64_ERRATUM_2054223=y
+CONFIG_ARM64_ERRATUM_2067961=y
+CONFIG_ARM64_ERRATUM_2077057=y
+CONFIG_ARM64_ERRATUM_2658417=y
+CONFIG_ARM64_ERRATUM_819472=y
+CONFIG_ARM64_ERRATUM_824069=y
+CONFIG_ARM64_ERRATUM_826319=y
+CONFIG_ARM64_ERRATUM_827319=y
+CONFIG_ARM64_ERRATUM_832075=y
+CONFIG_ARM64_ERRATUM_843419=y
+CONFIG_ARM64_ERRATUM_858921=y
+CONFIG_ARM64_HW_AFDBM=y
+CONFIG_ARM64_LD_HAS_FIX_ERRATUM_843419=y
+CONFIG_ARM64_PAGE_SHIFT=12
+CONFIG_ARM64_PAN=y
+CONFIG_ARM64_PA_BITS=48
+CONFIG_ARM64_PA_BITS_48=y
+CONFIG_ARM64_PTR_AUTH=y
+CONFIG_ARM64_PTR_AUTH_KERNEL=y
+CONFIG_ARM64_RAS_EXTN=y
+CONFIG_ARM64_SME=y
+CONFIG_ARM64_SVE=y
+CONFIG_ARM64_TAGGED_ADDR_ABI=y
+CONFIG_ARM64_VA_BITS=48
+# CONFIG_ARM64_VA_BITS_39 is not set
+CONFIG_ARM64_VA_BITS_48=y
+CONFIG_ARM64_WORKAROUND_CLEAN_CACHE=y
+CONFIG_ARM64_WORKAROUND_TSB_FLUSH_FAILURE=y
+CONFIG_ARM_AMBA=y
+CONFIG_ARM_ARCH_TIMER=y
+CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y
+CONFIG_ARM_ARCH_TIMER_OOL_WORKAROUND=y
+CONFIG_ARM_GIC=y
+CONFIG_ARM_GIC_V2M=y
+CONFIG_ARM_GIC_V3=y
+CONFIG_ARM_GIC_V3_ITS=y
+CONFIG_ARM_GIC_V3_ITS_PCI=y
+CONFIG_ARM_MHU=y
+CONFIG_ARM_MHU_V2=y
+CONFIG_ARM_PSCI_CPUIDLE=y
+CONFIG_ARM_PSCI_CPUIDLE_DOMAIN=y
+CONFIG_ARM_PSCI_FW=y
+# CONFIG_ARM_RK3399_DMC_DEVFREQ is not set
+CONFIG_ARM_SCMI_CPUFREQ=y
+CONFIG_ARM_SCMI_HAVE_SHMEM=y
+CONFIG_ARM_SCMI_HAVE_TRANSPORT=y
+CONFIG_ARM_SCMI_POWER_CONTROL=y
+CONFIG_ARM_SCMI_POWER_DOMAIN=y
+CONFIG_ARM_SCMI_PROTOCOL=y
+CONFIG_ARM_SCMI_TRANSPORT_MAILBOX=y
+CONFIG_ARM_SCMI_TRANSPORT_SMC=y
+CONFIG_ARM_SCMI_TRANSPORT_SMC_ATOMIC_ENABLE=y
+CONFIG_ARM_SCPI_CPUFREQ=y
+CONFIG_ARM_SCPI_POWER_DOMAIN=y
+CONFIG_ARM_SCPI_PROTOCOL=y
+CONFIG_ARM_SMMU=y
+CONFIG_ARM_SMMU_DISABLE_BYPASS_BY_DEFAULT=y
+# CONFIG_ARM_SMMU_LEGACY_DT_BINDINGS is not set
+CONFIG_ARM_SMMU_V3=y
+# CONFIG_ARM_SMMU_V3_SVA is not set
+CONFIG_AUDIT_ARCH_COMPAT_GENERIC=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_GPIO=y
+CONFIG_BACKLIGHT_PWM=y
+CONFIG_BLK_DEV_BSG=y
+CONFIG_BLK_DEV_BSGLIB=y
+CONFIG_BLK_DEV_BSG_COMMON=y
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_BLK_DEV_INTEGRITY=y
+CONFIG_BLK_DEV_INTEGRITY_T10=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_NVME=y
+CONFIG_BLK_DEV_PCIESSD_MTIP32XX=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_BLK_MQ_PCI=y
+CONFIG_BLK_PM=y
+CONFIG_BRCMSTB_GISB_ARB=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+CONFIG_CC_HAVE_SHADOW_CALL_STACK=y
+CONFIG_CC_HAVE_STACKPROTECTOR_SYSREG=y
+CONFIG_CC_IMPLICIT_FALLTHROUGH="-Wimplicit-fallthrough=5"
+CONFIG_CC_NO_ARRAY_BOUNDS=y
+CONFIG_CHARGER_GPIO=y
+# CONFIG_CHARGER_RK817 is not set
+CONFIG_CLKSRC_MMIO=y
+CONFIG_CLK_PX30=y
+CONFIG_CLK_RK3308=y
+CONFIG_CLK_RK3328=y
+CONFIG_CLK_RK3368=y
+CONFIG_CLK_RK3399=y
+CONFIG_CLK_RK3568=y
+CONFIG_CLONE_BACKWARDS=y
+CONFIG_CMA=y
+CONFIG_CMA_ALIGNMENT=8
+CONFIG_CMA_AREAS=7
+# CONFIG_CMA_DEBUG is not set
+# CONFIG_CMA_DEBUGFS is not set
+CONFIG_CMA_SIZE_MBYTES=16
+# CONFIG_CMA_SIZE_SEL_MAX is not set
+CONFIG_CMA_SIZE_SEL_MBYTES=y
+# CONFIG_CMA_SIZE_SEL_MIN is not set
+# CONFIG_CMA_SIZE_SEL_PERCENTAGE is not set
+# CONFIG_CMA_SYSFS is not set
+CONFIG_COMMON_CLK=y
+CONFIG_COMMON_CLK_RK808=y
+CONFIG_COMMON_CLK_ROCKCHIP=y
+CONFIG_COMMON_CLK_SCMI=y
+CONFIG_COMMON_CLK_SCPI=y
+CONFIG_COMPACT_UNEVICTABLE_DEFAULT=1
+CONFIG_COMPAT_32BIT_TIME=y
+CONFIG_CONFIGFS_FS=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_CONTEXT_TRACKING=y
+CONFIG_CONTEXT_TRACKING_IDLE=y
+CONFIG_CONTIG_ALLOC=y
+CONFIG_CPUFREQ_DT=y
+CONFIG_CPUFREQ_DT_PLATDEV=y
+CONFIG_CPU_FREQ=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL=y
+CONFIG_CPU_FREQ_GOV_ATTR_SET=y
+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
+# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+CONFIG_CPU_FREQ_GOV_POWERSAVE=y
+CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y
+# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
+CONFIG_CPU_FREQ_STAT=y
+CONFIG_CPU_IDLE=y
+CONFIG_CPU_IDLE_GOV_MENU=y
+CONFIG_CPU_IDLE_MULTIPLE_DRIVERS=y
+CONFIG_CPU_ISOLATION=y
+CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_CPU_PM=y
+CONFIG_CPU_RMAP=y
+CONFIG_CPU_THERMAL=y
+CONFIG_CRASH_CORE=y
+CONFIG_CRASH_DUMP=y
+CONFIG_CRC16=y
+# CONFIG_CRC32_SARWATE is not set
+CONFIG_CRC32_SLICEBY8=y
+CONFIG_CRC64=y
+CONFIG_CRC64_ROCKSOFT=y
+CONFIG_CRC_T10DIF=y
+CONFIG_CROSS_MEMORY_ATTACH=y
+CONFIG_CRYPTO_AES_ARM64=y
+CONFIG_CRYPTO_AES_ARM64_CE=y
+CONFIG_CRYPTO_AES_ARM64_CE_BLK=y
+CONFIG_CRYPTO_AES_ARM64_CE_CCM=y
+CONFIG_CRYPTO_CRC32=y
+CONFIG_CRYPTO_CRC32C=y
+CONFIG_CRYPTO_CRC64_ROCKSOFT=y
+CONFIG_CRYPTO_CRCT10DIF=y
+CONFIG_CRYPTO_CRCT10DIF_ARM64_CE=y
+CONFIG_CRYPTO_CRYPTD=y
+# CONFIG_CRYPTO_DEV_ROCKCHIP is not set
+CONFIG_CRYPTO_GHASH_ARM64_CE=y
+CONFIG_CRYPTO_HW=y
+CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
+CONFIG_CRYPTO_LIB_SHA1=y
+CONFIG_CRYPTO_LIB_UTILS=y
+CONFIG_CRYPTO_POLYVAL=y
+CONFIG_CRYPTO_POLYVAL_ARM64_CE=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_SM3=y
+CONFIG_CRYPTO_SM3_NEON=y
+CONFIG_CRYPTO_SM4=y
+CONFIG_CRYPTO_SM4_ARM64_CE_BLK=y
+CONFIG_CRYPTO_SM4_ARM64_NEON_BLK=y
+CONFIG_DCACHE_WORD_ACCESS=y
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEVFREQ_GOV_PASSIVE is not set
+CONFIG_DEVFREQ_GOV_PERFORMANCE=y
+CONFIG_DEVFREQ_GOV_POWERSAVE=y
+CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=y
+CONFIG_DEVFREQ_GOV_USERSPACE=y
+# CONFIG_DEVFREQ_THERMAL is not set
+CONFIG_DEVMEM=y
+# CONFIG_DEVPORT is not set
+CONFIG_DMADEVICES=y
+CONFIG_DMA_CMA=y
+CONFIG_DMA_DIRECT_REMAP=y
+CONFIG_DMA_ENGINE=y
+CONFIG_DMA_OF=y
+CONFIG_DMA_OPS=y
+CONFIG_DMA_SHARED_BUFFER=y
+CONFIG_DNOTIFY=y
+CONFIG_DTC=y
+CONFIG_DT_IDLE_GENPD=y
+CONFIG_DT_IDLE_STATES=y
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_DWMAC_DWC_QOS_ETH=y
+CONFIG_DWMAC_GENERIC=y
+CONFIG_DWMAC_ROCKCHIP=y
+CONFIG_DW_WATCHDOG=y
+CONFIG_EDAC_SUPPORT=y
+CONFIG_EEPROM_AT24=y
+CONFIG_EMAC_ROCKCHIP=y
+CONFIG_ENERGY_MODEL=y
+CONFIG_EXCLUSIVE_SYSTEM_RAM=y
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXTCON=y
+CONFIG_F2FS_FS=y
+CONFIG_FANOTIFY=y
+CONFIG_FHANDLE=y
+CONFIG_FIXED_PHY=y
+CONFIG_FIX_EARLYCON_MEM=y
+# CONFIG_FORTIFY_SOURCE is not set
+CONFIG_FRAME_POINTER=y
+CONFIG_FS_IOMAP=y
+CONFIG_FS_MBCACHE=y
+CONFIG_FS_POSIX_ACL=y
+CONFIG_FWNODE_MDIO=y
+CONFIG_FW_LOADER_PAGED_BUF=y
+CONFIG_FW_LOADER_SYSFS=y
+CONFIG_GCC11_NO_ARRAY_BOUNDS=y
+CONFIG_GCC_SUPPORTS_DYNAMIC_FTRACE_WITH_REGS=y
+CONFIG_GENERIC_ALLOCATOR=y
+CONFIG_GENERIC_ARCH_TOPOLOGY=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
+CONFIG_GENERIC_CPU_AUTOPROBE=y
+CONFIG_GENERIC_CPU_VULNERABILITIES=y
+CONFIG_GENERIC_CSUM=y
+CONFIG_GENERIC_EARLY_IOREMAP=y
+CONFIG_GENERIC_GETTIMEOFDAY=y
+CONFIG_GENERIC_IDLE_POLL_SETUP=y
+CONFIG_GENERIC_IOREMAP=y
+CONFIG_GENERIC_IRQ_CHIP=y
+CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
+CONFIG_GENERIC_IRQ_MIGRATION=y
+CONFIG_GENERIC_IRQ_SHOW=y
+CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
+CONFIG_GENERIC_LIB_DEVMEM_IS_ALLOWED=y
+CONFIG_GENERIC_MSI_IRQ=y
+CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
+CONFIG_GENERIC_PCI_IOMAP=y
+CONFIG_GENERIC_PHY=y
+CONFIG_GENERIC_PINCONF=y
+CONFIG_GENERIC_SCHED_CLOCK=y
+CONFIG_GENERIC_SMP_IDLE_THREAD=y
+CONFIG_GENERIC_STRNCPY_FROM_USER=y
+CONFIG_GENERIC_STRNLEN_USER=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GPIOLIB_IRQCHIP=y
+CONFIG_GPIO_CDEV=y
+CONFIG_GPIO_DWAPB=y
+CONFIG_GPIO_GENERIC=y
+CONFIG_GPIO_GENERIC_PLATFORM=y
+CONFIG_GPIO_ROCKCHIP=y
+CONFIG_GPIO_SYSCON=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_HAS_DMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT_MAP=y
+CONFIG_HID=y
+CONFIG_HID_GENERIC=y
+CONFIG_HOTPLUG_CPU=y
+CONFIG_HOTPLUG_PCI=y
+# CONFIG_HOTPLUG_PCI_CPCI is not set
+# CONFIG_HOTPLUG_PCI_PCIE is not set
+# CONFIG_HOTPLUG_PCI_SHPC is not set
+CONFIG_HUGETLBFS=y
+CONFIG_HUGETLB_PAGE=y
+CONFIG_HWMON=y
+CONFIG_HWSPINLOCK=y
+CONFIG_HW_CONSOLE=y
+CONFIG_HW_RANDOM=y
+CONFIG_HW_RANDOM_ROCKCHIP=y
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_COMPAT=y
+CONFIG_I2C_HELPER_AUTO=y
+CONFIG_I2C_RK3X=y
+CONFIG_IIO=y
+# CONFIG_IIO_SCMI is not set
+CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
+CONFIG_INDIRECT_PIO=y
+CONFIG_INPUT=y
+CONFIG_INPUT_EVDEV=y
+CONFIG_INPUT_FF_MEMLESS=y
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_INPUT_LEDS=y
+CONFIG_INPUT_MATRIXKMAP=y
+CONFIG_INPUT_RK805_PWRKEY=y
+CONFIG_IOMMU_API=y
+# CONFIG_IOMMU_DEBUGFS is not set
+# CONFIG_IOMMU_DEFAULT_DMA_LAZY is not set
+# CONFIG_IOMMU_DEFAULT_DMA_STRICT is not set
+CONFIG_IOMMU_DEFAULT_PASSTHROUGH=y
+CONFIG_IOMMU_DMA=y
+CONFIG_IOMMU_IOVA=y
+CONFIG_IOMMU_IO_PGTABLE=y
+# CONFIG_IOMMU_IO_PGTABLE_ARMV7S is not set
+# CONFIG_IOMMU_IO_PGTABLE_DART is not set
+CONFIG_IOMMU_IO_PGTABLE_LPAE=y
+# CONFIG_IOMMU_IO_PGTABLE_LPAE_SELFTEST is not set
+CONFIG_IOMMU_SUPPORT=y
+# CONFIG_IO_STRICT_DEVMEM is not set
+CONFIG_IRQCHIP=y
+CONFIG_IRQ_DOMAIN=y
+CONFIG_IRQ_DOMAIN_HIERARCHY=y
+CONFIG_IRQ_FORCED_THREADING=y
+CONFIG_IRQ_MSI_IOMMU=y
+CONFIG_IRQ_TIME_ACCOUNTING=y
+CONFIG_IRQ_WORK=y
+CONFIG_JBD2=y
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JUMP_LABEL=y
+CONFIG_KALLSYMS=y
+CONFIG_KCMP=y
+CONFIG_KEXEC_CORE=y
+CONFIG_KEXEC_FILE=y
+CONFIG_KSM=y
+# CONFIG_LEDS_BRIGHTNESS_HW_CHANGED is not set
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_PWM=y
+CONFIG_LEDS_SYSCON=y
+CONFIG_LEDS_TRIGGER_CPU=y
+CONFIG_LEDS_TRIGGER_PANIC=y
+CONFIG_LIBCRC32C=y
+CONFIG_LIBFDT=y
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_LOCK_DEBUGGING_SUPPORT=y
+CONFIG_LOCK_SPIN_ON_OWNER=y
+CONFIG_LOG_BUF_SHIFT=19
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_MAGIC_SYSRQ_SERIAL=y
+CONFIG_MAILBOX=y
+# CONFIG_MAILBOX_TEST is not set
+CONFIG_MDIO_BUS=y
+CONFIG_MDIO_BUS_MUX=y
+CONFIG_MDIO_BUS_MUX_GPIO=y
+CONFIG_MDIO_BUS_MUX_MMIOREG=y
+CONFIG_MDIO_DEVICE=y
+CONFIG_MDIO_DEVRES=y
+CONFIG_MEDIATEK_GE_PHY=y
+CONFIG_MEMFD_CREATE=y
+CONFIG_MEMORY_ISOLATION=y
+CONFIG_MFD_CORE=y
+# CONFIG_MFD_KHADAS_MCU is not set
+CONFIG_MFD_RK808=y
+CONFIG_MFD_SYSCON=y
+CONFIG_MIGRATION=y
+CONFIG_MMC=y
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_MINORS=32
+CONFIG_MMC_CQHCI=y
+CONFIG_MMC_DW=y
+# CONFIG_MMC_DW_BLUEFIELD is not set
+# CONFIG_MMC_DW_EXYNOS is not set
+# CONFIG_MMC_DW_HI3798CV200 is not set
+# CONFIG_MMC_DW_K3 is not set
+# CONFIG_MMC_DW_PCI is not set
+CONFIG_MMC_DW_PLTFM=y
+CONFIG_MMC_DW_ROCKCHIP=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_OF_ARASAN=y
+CONFIG_MMC_SDHCI_OF_DWCMSHC=y
+# CONFIG_MMC_SDHCI_PCI is not set
+CONFIG_MMC_SDHCI_PLTFM=y
+CONFIG_MODULES_USE_ELF_RELA=y
+CONFIG_MOTORCOMM_PHY=y
+CONFIG_MQ_IOSCHED_DEADLINE=y
+# CONFIG_MTD_CFI is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_SPI_NOR=y
+CONFIG_MTD_SPI_NOR_USE_4K_SECTORS=y
+CONFIG_MTD_SPLIT_FIRMWARE=y
+CONFIG_MUTEX_SPIN_ON_OWNER=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_NEED_SG_DMA_LENGTH=y
+CONFIG_NET_DEVLINK=y
+CONFIG_NET_DSA=y
+CONFIG_NET_DSA_MT7530=y
+CONFIG_NET_DSA_MT7530_MDIO=y
+CONFIG_NET_DSA_MT7530_MMIO=y
+CONFIG_NET_DSA_TAG_MTK=y
+CONFIG_NET_FLOW_LIMIT=y
+CONFIG_NET_PTP_CLASSIFY=y
+CONFIG_NET_SELFTESTS=y
+CONFIG_NET_SWITCHDEV=y
+CONFIG_NLS=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NOP_USB_XCEIV=y
+CONFIG_NO_HZ_COMMON=y
+CONFIG_NO_HZ_IDLE=y
+CONFIG_NR_CPUS=256
+CONFIG_NVMEM=y
+CONFIG_NVMEM_ROCKCHIP_EFUSE=y
+# CONFIG_NVMEM_ROCKCHIP_OTP is not set
+CONFIG_NVMEM_SYSFS=y
+CONFIG_NVME_CORE=y
+# CONFIG_NVME_HWMON is not set
+# CONFIG_NVME_MULTIPATH is not set
+CONFIG_OF=y
+CONFIG_OF_ADDRESS=y
+CONFIG_OF_DYNAMIC=y
+CONFIG_OF_EARLY_FLATTREE=y
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_GPIO=y
+CONFIG_OF_IOMMU=y
+CONFIG_OF_IRQ=y
+CONFIG_OF_KOBJ=y
+CONFIG_OF_MDIO=y
+CONFIG_OF_OVERLAY=y
+CONFIG_OF_RESOLVE=y
+# CONFIG_OVERLAY_FS_XINO_AUTO is not set
+CONFIG_PADATA=y
+CONFIG_PAGE_POOL=y
+CONFIG_PAGE_SIZE_LESS_THAN_256KB=y
+CONFIG_PAGE_SIZE_LESS_THAN_64KB=y
+# CONFIG_PANIC_ON_OOPS is not set
+CONFIG_PANIC_ON_OOPS_VALUE=0
+CONFIG_PANIC_TIMEOUT=0
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_PARTITION_PERCPU=y
+CONFIG_PCI=y
+CONFIG_PCIEAER=y
+CONFIG_PCIEASPM=y
+CONFIG_PCIEASPM_DEFAULT=y
+# CONFIG_PCIEASPM_PERFORMANCE is not set
+# CONFIG_PCIEASPM_POWERSAVE is not set
+# CONFIG_PCIEASPM_POWER_SUPERSAVE is not set
+CONFIG_PCIEPORTBUS=y
+CONFIG_PCIE_DW=y
+CONFIG_PCIE_DW_HOST=y
+CONFIG_PCIE_PME=y
+CONFIG_PCIE_ROCKCHIP=y
+CONFIG_PCIE_ROCKCHIP_DW_HOST=y
+CONFIG_PCIE_ROCKCHIP_HOST=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_DOMAINS_GENERIC=y
+CONFIG_PCI_MSI=y
+CONFIG_PCI_MSI_IRQ_DOMAIN=y
+CONFIG_PCI_STUB=y
+CONFIG_PCS_MTK_LYNXI=y
+CONFIG_PCS_XPCS=y
+CONFIG_PGTABLE_LEVELS=4
+CONFIG_PHYLIB=y
+CONFIG_PHYLINK=y
+CONFIG_PHYS_ADDR_T_64BIT=y
+CONFIG_PHY_ROCKCHIP_DP=y
+# CONFIG_PHY_ROCKCHIP_DPHY_RX0 is not set
+CONFIG_PHY_ROCKCHIP_EMMC=y
+# CONFIG_PHY_ROCKCHIP_INNO_CSIDPHY is not set
+# CONFIG_PHY_ROCKCHIP_INNO_DSIDPHY is not set
+# CONFIG_PHY_ROCKCHIP_INNO_HDMI is not set
+CONFIG_PHY_ROCKCHIP_INNO_USB2=y
+CONFIG_PHY_ROCKCHIP_NANENG_COMBO_PHY=y
+CONFIG_PHY_ROCKCHIP_PCIE=y
+CONFIG_PHY_ROCKCHIP_SNPS_PCIE3=y
+CONFIG_PHY_ROCKCHIP_TYPEC=y
+CONFIG_PHY_ROCKCHIP_USB=y
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_RK805=y
+CONFIG_PINCTRL_ROCKCHIP=y
+# CONFIG_PINCTRL_SINGLE is not set
+CONFIG_PL330_DMA=y
+CONFIG_PLATFORM_MHU=y
+CONFIG_PM=y
+CONFIG_PM_CLK=y
+CONFIG_PM_DEVFREQ=y
+# CONFIG_PM_DEVFREQ_EVENT is not set
+CONFIG_PM_GENERIC_DOMAINS=y
+CONFIG_PM_GENERIC_DOMAINS_OF=y
+CONFIG_PM_OPP=y
+CONFIG_POSIX_CPU_TIMERS_TASK_WORK=y
+CONFIG_POWER_RESET=y
+CONFIG_POWER_SUPPLY=y
+CONFIG_POWER_SUPPLY_HWMON=y
+CONFIG_PPS=y
+CONFIG_PREEMPT=y
+CONFIG_PREEMPTION=y
+CONFIG_PREEMPT_BUILD=y
+CONFIG_PREEMPT_COUNT=y
+# CONFIG_PREEMPT_NONE is not set
+CONFIG_PREEMPT_RCU=y
+CONFIG_PRINTK_TIME=y
+# CONFIG_PRINT_QUOTA_WARNING is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_PROC_VMCORE=y
+CONFIG_PTP_1588_CLOCK=y
+CONFIG_PTP_1588_CLOCK_OPTIONAL=y
+CONFIG_PWM=y
+CONFIG_PWM_ROCKCHIP=y
+CONFIG_PWM_SYSFS=y
+# CONFIG_QFMT_V2 is not set
+CONFIG_QUEUED_RWLOCKS=y
+CONFIG_QUEUED_SPINLOCKS=y
+CONFIG_QUOTA=y
+CONFIG_QUOTACTL=y
+CONFIG_RAID_ATTRS=y
+CONFIG_RANDOMIZE_BASE=y
+CONFIG_RANDOMIZE_MODULE_REGION_FULL=y
+CONFIG_RANDSTRUCT_NONE=y
+CONFIG_RAS=y
+CONFIG_RATIONAL=y
+# CONFIG_RAVE_SP_CORE is not set
+CONFIG_RCU_TRACE=y
+CONFIG_REALTEK_PHY=y
+CONFIG_REGMAP=y
+CONFIG_REGMAP_I2C=y
+CONFIG_REGMAP_IRQ=y
+CONFIG_REGMAP_MMIO=y
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_ARM_SCMI=y
+CONFIG_REGULATOR_FAN53555=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
+CONFIG_REGULATOR_GPIO=y
+CONFIG_REGULATOR_PWM=y
+CONFIG_REGULATOR_RK808=y
+CONFIG_RELOCATABLE=y
+CONFIG_RESET_CONTROLLER=y
+CONFIG_RESET_SCMI=y
+CONFIG_RFS_ACCEL=y
+CONFIG_ROCKCHIP_GRF=y
+CONFIG_ROCKCHIP_IODOMAIN=y
+CONFIG_ROCKCHIP_IOMMU=y
+CONFIG_ROCKCHIP_MBOX=y
+CONFIG_ROCKCHIP_PHY=y
+CONFIG_ROCKCHIP_PM_DOMAINS=y
+# CONFIG_ROCKCHIP_SARADC is not set
+CONFIG_ROCKCHIP_THERMAL=y
+CONFIG_ROCKCHIP_TIMER=y
+CONFIG_RODATA_FULL_DEFAULT_ENABLED=y
+CONFIG_RPS=y
+CONFIG_RSEQ=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_HYM8563=y
+CONFIG_RTC_DRV_RK808=y
+CONFIG_RTC_I2C_AND_SPI=y
+CONFIG_RTC_NVMEM=y
+# CONFIG_RUNTIME_TESTING_MENU is not set
+CONFIG_RWSEM_SPIN_ON_OWNER=y
+CONFIG_SCHED_MC=y
+CONFIG_SCSI=y
+CONFIG_SCSI_COMMON=y
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_PROC_FS is not set
+CONFIG_SCSI_SAS_ATTRS=y
+CONFIG_SCSI_SAS_HOST_SMP=y
+CONFIG_SCSI_SAS_LIBSAS=y
+# CONFIG_SECURITY_DMESG_RESTRICT is not set
+CONFIG_SENSORS_ARM_SCMI=y
+CONFIG_SENSORS_ARM_SCPI=y
+CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y
+CONFIG_SERIAL_8250_DW=y
+CONFIG_SERIAL_8250_DWLIB=y
+CONFIG_SERIAL_8250_EXAR=y
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_FSL=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_PCI=y
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_AMBA_PL011=y
+CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
+CONFIG_SERIAL_DEV_BUS=y
+CONFIG_SERIAL_DEV_CTRL_TTYPORT=y
+CONFIG_SERIAL_MCTRL_GPIO=y
+CONFIG_SERIAL_OF_PLATFORM=y
+CONFIG_SERIO=y
+CONFIG_SERIO_AMBAKMI=y
+CONFIG_SERIO_LIBPS2=y
+CONFIG_SG_POOL=y
+CONFIG_SMP=y
+CONFIG_SOCK_RX_QUEUE_MAPPING=y
+CONFIG_SOFTIRQ_ON_OWN_STACK=y
+CONFIG_SPARSEMEM=y
+CONFIG_SPARSEMEM_EXTREME=y
+CONFIG_SPARSEMEM_VMEMMAP=y
+CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
+CONFIG_SPARSE_IRQ=y
+CONFIG_SPI=y
+CONFIG_SPI_BITBANG=y
+CONFIG_SPI_DYNAMIC=y
+CONFIG_SPI_MASTER=y
+CONFIG_SPI_MEM=y
+CONFIG_SPI_ROCKCHIP=y
+CONFIG_SPI_ROCKCHIP_SFC=y
+CONFIG_SPI_SPIDEV=y
+# CONFIG_SQUASHFS_DECOMP_MULTI_PERCPU is not set
+CONFIG_SQUASHFS_DECOMP_SINGLE=y
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FILE_CACHE=y
+# CONFIG_SQUASHFS_FILE_DIRECT is not set
+CONFIG_SRAM=y
+CONFIG_SRCU=y
+CONFIG_STACKPROTECTOR=y
+CONFIG_STACKPROTECTOR_PER_TASK=y
+CONFIG_STACKPROTECTOR_STRONG=y
+CONFIG_STACKTRACE=y
+CONFIG_STMMAC_ETH=y
+CONFIG_STMMAC_PLATFORM=y
+CONFIG_STRICT_DEVMEM=y
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_SWAP is not set
+CONFIG_SWIOTLB=y
+CONFIG_SWPHY=y
+CONFIG_SYNC_FILE=y
+CONFIG_SYSCTL_EXCEPTION_TRACE=y
+CONFIG_SYSFS_SYSCALL=y
+# CONFIG_TEXTSEARCH is not set
+CONFIG_THERMAL=y
+CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
+CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
+CONFIG_THERMAL_EMULATION=y
+CONFIG_THERMAL_GOV_POWER_ALLOCATOR=y
+CONFIG_THERMAL_GOV_STEP_WISE=y
+CONFIG_THERMAL_HWMON=y
+CONFIG_THERMAL_OF=y
+CONFIG_THREAD_INFO_IN_TASK=y
+CONFIG_TICK_CPU_ACCOUNTING=y
+CONFIG_TIMER_OF=y
+CONFIG_TIMER_PROBE=y
+CONFIG_TRACE_CLOCK=y
+CONFIG_TRACE_IRQFLAGS_NMI_SUPPORT=y
+CONFIG_TRANSPARENT_HUGEPAGE=y
+CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y
+# CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set
+CONFIG_TRANS_TABLE=y
+CONFIG_TREE_RCU=y
+CONFIG_TREE_SRCU=y
+CONFIG_TYPEC=y
+# CONFIG_TYPEC_ANX7411 is not set
+CONFIG_TYPEC_FUSB302=y
+# CONFIG_TYPEC_HD3SS3220 is not set
+# CONFIG_TYPEC_MUX_FSA4480 is not set
+# CONFIG_TYPEC_MUX_PI3USB30532 is not set
+# CONFIG_TYPEC_RT1719 is not set
+# CONFIG_TYPEC_STUSB160X is not set
+# CONFIG_TYPEC_TCPCI is not set
+CONFIG_TYPEC_TCPM=y
+# CONFIG_TYPEC_TPS6598X is not set
+# CONFIG_TYPEC_WUSB3801 is not set
+# CONFIG_UACCE is not set
+# CONFIG_UCLAMP_TASK is not set
+# CONFIG_UEVENT_HELPER is not set
+CONFIG_UNINLINE_SPIN_UNLOCK=y
+CONFIG_UNMAP_KERNEL_AT_EL0=y
+CONFIG_USB=y
+CONFIG_USB_COMMON=y
+CONFIG_USB_DWC3=y
+CONFIG_USB_DWC3_HOST=y
+CONFIG_USB_DWC3_OF_SIMPLE=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_HCD_PLATFORM=y
+# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+CONFIG_USB_HID=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_HCD_PLATFORM=y
+CONFIG_USB_PHY=y
+CONFIG_USB_ROLE_SWITCH=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ULPI=y
+CONFIG_USB_ULPI_BUS=y
+CONFIG_USB_ULPI_VIEWPORT=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_PLATFORM=y
+# CONFIG_VIRTIO_MENU is not set
+CONFIG_VMAP_STACK=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_WATCHDOG_CORE=y
+CONFIG_XARRAY_MULTI=y
+CONFIG_XPS=y
+CONFIG_XXHASH=y
+CONFIG_XZ_DEC_ARM=y
+CONFIG_XZ_DEC_ARMTHUMB=y
+CONFIG_XZ_DEC_BCJ=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZONE_DMA32=y

target/linux/rockchip/patches-6.1/001-v6.3-mmc-sdhci-of-dwcmshc-Update-DLL-and-pre-change-delay-for.patch

@@ -0,0 +1,60 @@
+From b75a52b0dda353aeefb4830a320589a363f49579 Mon Sep 17 00:00:00 2001
+From: Shawn Lin <[email protected]>
+Date: Thu, 2 Feb 2023 08:35:16 +0800
+Subject: [PATCH] mmc: sdhci-of-dwcmshc: Update DLL and pre-change delay for
+ rockchip platform
+
+For Rockchip platform, DLL bypass bit and start bit need to be set if
+DLL is not locked. And adjust pre-change delay to 0x3 for better signal
+test result.
+
+Signed-off-by: Shawn Lin <[email protected]>
+Link: https://lore.kernel.org/r/[email protected]
+Signed-off-by: Ulf Hansson <[email protected]>
+---
+ drivers/mmc/host/sdhci-of-dwcmshc.c | 13 +++++++++----
+ 1 file changed, 9 insertions(+), 4 deletions(-)
+
+--- a/drivers/mmc/host/sdhci-of-dwcmshc.c
++++ b/drivers/mmc/host/sdhci-of-dwcmshc.c
+@@ -48,6 +48,7 @@
+ #define DWCMSHC_EMMC_DLL_RXCLK_SRCSEL	29
+ #define DWCMSHC_EMMC_DLL_START_POINT	16
+ #define DWCMSHC_EMMC_DLL_INC		8
++#define DWCMSHC_EMMC_DLL_BYPASS		BIT(24)
+ #define DWCMSHC_EMMC_DLL_DLYENA		BIT(27)
+ #define DLL_TXCLK_TAPNUM_DEFAULT	0x10
+ #define DLL_TXCLK_TAPNUM_90_DEGREES	0xA
+@@ -60,6 +61,7 @@
+ #define DLL_RXCLK_NO_INVERTER		1
+ #define DLL_RXCLK_INVERTER		0
+ #define DLL_CMDOUT_TAPNUM_90_DEGREES	0x8
++#define DLL_RXCLK_ORI_GATE		BIT(31)
+ #define DLL_CMDOUT_TAPNUM_FROM_SW	BIT(24)
+ #define DLL_CMDOUT_SRC_CLK_NEG		BIT(28)
+ #define DLL_CMDOUT_EN_SRC_CLK_NEG	BIT(29)
+@@ -234,9 +236,12 @@ static void dwcmshc_rk3568_set_clock(str
+ 	sdhci_writel(host, extra, reg);
+ 
+ 	if (clock <= 52000000) {
+-		/* Disable DLL and reset both of sample and drive clock */
+-		sdhci_writel(host, 0, DWCMSHC_EMMC_DLL_CTRL);
+-		sdhci_writel(host, 0, DWCMSHC_EMMC_DLL_RXCLK);
++		/*
++		 * Disable DLL and reset both of sample and drive clock.
++		 * The bypass bit and start bit need to be set if DLL is not locked.
++		 */
++		sdhci_writel(host, DWCMSHC_EMMC_DLL_BYPASS | DWCMSHC_EMMC_DLL_START, DWCMSHC_EMMC_DLL_CTRL);
++		sdhci_writel(host, DLL_RXCLK_ORI_GATE, DWCMSHC_EMMC_DLL_RXCLK);
+ 		sdhci_writel(host, 0, DWCMSHC_EMMC_DLL_TXCLK);
+ 		sdhci_writel(host, 0, DECMSHC_EMMC_DLL_CMDOUT);
+ 		/*
+@@ -279,7 +284,7 @@ static void dwcmshc_rk3568_set_clock(str
+ 	}
+ 
+ 	extra = 0x1 << 16 | /* tune clock stop en */
+-		0x2 << 17 | /* pre-change delay */
++		0x3 << 17 | /* pre-change delay */
+ 		0x3 << 19;  /* post-change delay */
+ 	sdhci_writel(host, extra, dwc_priv->vendor_specific_area1 + DWCMSHC_EMMC_ATCTRL);
+ 

target/linux/rockchip/patches-6.1/002-v6.4-mmc-sdhci-of-dwcmshc-properly-determine-max-clock-on.patch

@@ -0,0 +1,52 @@
+From 49502408007b77ff290ce62e6218cefaeedcb31a Mon Sep 17 00:00:00 2001
+From: Vasily Khoruzhick <[email protected]>
+Date: Thu, 9 Mar 2023 17:03:49 -0800
+Subject: [PATCH] mmc: sdhci-of-dwcmshc: properly determine max clock on
+ Rockchip
+
+Currently .get_max_clock returns the current clock rate for cclk_emmc
+on rk35xx, thus max clock gets set to whatever bootloader set it to.
+
+In case of u-boot, it is intentionally reset to 50 MHz if it boots
+from eMMC, see mmc_deinit() in u-boot sources. As a result, HS200 and
+HS400 modes are never selected by Linux, because dwcmshc_rk35xx_postinit
+clears appropriate caps if host->mmc->f_max is < 52MHz
+
+cclk_emmc is not a fixed clock on rk35xx, so using
+sdhci_pltfm_clk_get_max_clock is not appropriate here.
+
+Implement rk35xx_get_max_clock that returns actual max clock for cclk_emmc.
+
+Signed-off-by: Vasily Khoruzhick <[email protected]>
+Acked-by: Adrian Hunter <[email protected]>
+Link: https://lore.kernel.org/r/[email protected]
+Signed-off-by: Ulf Hansson <[email protected]>
+---
+ drivers/mmc/host/sdhci-of-dwcmshc.c | 9 ++++++++-
+ 1 file changed, 8 insertions(+), 1 deletion(-)
+
+--- a/drivers/mmc/host/sdhci-of-dwcmshc.c
++++ b/drivers/mmc/host/sdhci-of-dwcmshc.c
+@@ -126,6 +126,13 @@ static unsigned int dwcmshc_get_max_cloc
+ 		return pltfm_host->clock;
+ }
+ 
++static unsigned int rk35xx_get_max_clock(struct sdhci_host *host)
++{
++	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
++
++	return clk_round_rate(pltfm_host->clk, ULONG_MAX);
++}
++
+ static void dwcmshc_check_auto_cmd23(struct mmc_host *mmc,
+ 				     struct mmc_request *mrq)
+ {
+@@ -343,7 +350,7 @@ static const struct sdhci_ops sdhci_dwcm
+ 	.set_clock		= dwcmshc_rk3568_set_clock,
+ 	.set_bus_width		= sdhci_set_bus_width,
+ 	.set_uhs_signaling	= dwcmshc_set_uhs_signaling,
+-	.get_max_clock		= sdhci_pltfm_clk_get_max_clock,
++	.get_max_clock		= rk35xx_get_max_clock,
+ 	.reset			= rk35xx_sdhci_reset,
+ 	.adma_write_desc	= dwcmshc_adma_write_desc,
+ };

target/linux/rockchip/patches-6.1/006-v6.4-arm64-dts-rockchip-Add-FriendlyARM-NanoPi-R2C.patch

@@ -0,0 +1,70 @@
+From 004589ff9df5b75672a78b6c3c4cba93202b14c9 Mon Sep 17 00:00:00 2001
+From: Tianling Shen <[email protected]>
+Date: Sat, 25 Mar 2023 15:40:20 +0800
+Subject: [PATCH] arm64: dts: rockchip: Add FriendlyARM NanoPi R2C
+
+The NanoPi R2C is a minor variant of NanoPi R2S with the on-board NIC
+chip changed from rtl8211e to yt8521s, and otherwise identical to R2S.
+
+Signed-off-by: Tianling Shen <[email protected]>
+Link: https://lore.kernel.org/r/[email protected]
+Signed-off-by: Heiko Stuebner <[email protected]>
+---
+ arch/arm64/boot/dts/rockchip/Makefile         |  1 +
+ .../boot/dts/rockchip/rk3328-nanopi-r2c.dts   | 40 +++++++++++++++++++
+ 2 files changed, 41 insertions(+)
+ create mode 100644 arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2c.dts
+
+--- a/arch/arm64/boot/dts/rockchip/Makefile
++++ b/arch/arm64/boot/dts/rockchip/Makefile
+@@ -10,6 +10,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3318-a9
+ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3326-odroid-go2.dtb
+ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-a1.dtb
+ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-evb.dtb
++dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-nanopi-r2c.dtb
+ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-nanopi-r2s.dtb
+ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-rock64.dtb
+ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-rock-pi-e.dtb
+--- /dev/null
++++ b/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2c.dts
+@@ -0,0 +1,40 @@
++// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
++/*
++ * Copyright (c) 2021 FriendlyElec Computer Tech. Co., Ltd.
++ * (http://www.friendlyarm.com)
++ *
++ * Copyright (c) 2021-2023 Tianling Shen <[email protected]>
++ */
++
++/dts-v1/;
++#include "rk3328-nanopi-r2s.dts"
++
++/ {
++	model = "FriendlyElec NanoPi R2C";
++	compatible = "friendlyarm,nanopi-r2c", "rockchip,rk3328";
++};
++
++&gmac2io {
++	phy-handle = <&yt8521s>;
++	tx_delay = <0x22>;
++	rx_delay = <0x12>;
++
++	mdio {
++		/delete-node/ ethernet-phy@1;
++
++		yt8521s: ethernet-phy@3 {
++			compatible = "ethernet-phy-ieee802.3-c22";
++			reg = <3>;
++
++			motorcomm,clk-out-frequency-hz = <125000000>;
++			motorcomm,keep-pll-enabled;
++			motorcomm,auto-sleep-disabled;
++
++			pinctrl-0 = <&eth_phy_reset_pin>;
++			pinctrl-names = "default";
++			reset-assert-us = <10000>;
++			reset-deassert-us = <50000>;
++			reset-gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>;
++		};
++	};
++};

target/linux/rockchip/patches-6.1/007-v6.3-arm64-dts-rockchip-rk3328-Add-Orange-Pi-R1-Plus.patch

@@ -0,0 +1,407 @@
+From 51712e1d014aaaa4c6e1e7e84932d58b5c0f59ed Mon Sep 17 00:00:00 2001
+From: Chukun Pan <[email protected]>
+Date: Sat, 3 Dec 2022 15:41:49 +0800
+Subject: [PATCH] arm64: dts: rockchip: rk3328: Add Orange Pi R1 Plus
+
+Orange Pi R1 Plus is a Rockchip RK3328 based SBC by Xunlong.
+
+This device is similar to the NanoPi R2S, and has a 16MB
+SPI NOR (mx25l12805d). The reset button is changed to
+directly reset the power supply, another detail is that
+both network ports have independent MAC addresses.
+
+Signed-off-by: Chukun Pan <[email protected]>
+Link: https://lore.kernel.org/r/[email protected]
+Signed-off-by: Heiko Stuebner <[email protected]>
+---
+ arch/arm64/boot/dts/rockchip/Makefile         |   1 +
+ .../dts/rockchip/rk3328-orangepi-r1-plus.dts  | 373 ++++++++++++++++++
+ 2 files changed, 374 insertions(+)
+ create mode 100644 arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dts
+
+--- a/arch/arm64/boot/dts/rockchip/Makefile
++++ b/arch/arm64/boot/dts/rockchip/Makefile
+@@ -12,6 +12,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-a1
+ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-evb.dtb
+ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-nanopi-r2c.dtb
+ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-nanopi-r2s.dtb
++dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-orangepi-r1-plus.dtb
+ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-rock64.dtb
+ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-rock-pi-e.dtb
+ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-roc-cc.dtb
+--- /dev/null
++++ b/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dts
+@@ -0,0 +1,373 @@
++// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
++/*
++ * Based on rk3328-nanopi-r2s.dts, which is:
++ *   Copyright (c) 2020 David Bauer <[email protected]>
++ */
++
++/dts-v1/;
++
++#include <dt-bindings/gpio/gpio.h>
++#include <dt-bindings/leds/common.h>
++#include "rk3328.dtsi"
++
++/ {
++	model = "Xunlong Orange Pi R1 Plus";
++	compatible = "xunlong,orangepi-r1-plus", "rockchip,rk3328";
++
++	aliases {
++		ethernet1 = &rtl8153;
++		mmc0 = &sdmmc;
++	};
++
++	chosen {
++		stdout-path = "serial2:1500000n8";
++	};
++
++	gmac_clk: gmac-clock {
++		compatible = "fixed-clock";
++		clock-frequency = <125000000>;
++		clock-output-names = "gmac_clkin";
++		#clock-cells = <0>;
++	};
++
++	leds {
++		compatible = "gpio-leds";
++		pinctrl-0 = <&lan_led_pin>, <&sys_led_pin>, <&wan_led_pin>;
++		pinctrl-names = "default";
++
++		led-0 {
++			function = LED_FUNCTION_LAN;
++			color = <LED_COLOR_ID_GREEN>;
++			gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>;
++		};
++
++		led-1 {
++			function = LED_FUNCTION_STATUS;
++			color = <LED_COLOR_ID_RED>;
++			gpios = <&gpio3 RK_PC5 GPIO_ACTIVE_HIGH>;
++			linux,default-trigger = "heartbeat";
++		};
++
++		led-2 {
++			function = LED_FUNCTION_WAN;
++			color = <LED_COLOR_ID_GREEN>;
++			gpios = <&gpio2 RK_PC2 GPIO_ACTIVE_HIGH>;
++		};
++	};
++
++	vcc_sd: sdmmc-regulator {
++		compatible = "regulator-fixed";
++		gpio = <&gpio0 RK_PD6 GPIO_ACTIVE_LOW>;
++		pinctrl-0 = <&sdmmc0m1_pin>;
++		pinctrl-names = "default";
++		regulator-name = "vcc_sd";
++		regulator-boot-on;
++		vin-supply = <&vcc_io>;
++	};
++
++	vcc_sys: vcc-sys-regulator {
++		compatible = "regulator-fixed";
++		regulator-name = "vcc_sys";
++		regulator-always-on;
++		regulator-boot-on;
++		regulator-min-microvolt = <5000000>;
++		regulator-max-microvolt = <5000000>;
++	};
++
++	vdd_5v_lan: vdd-5v-lan-regulator {
++		compatible = "regulator-fixed";
++		enable-active-high;
++		gpio = <&gpio2 RK_PC6 GPIO_ACTIVE_HIGH>;
++		pinctrl-0 = <&lan_vdd_pin>;
++		pinctrl-names = "default";
++		regulator-name = "vdd_5v_lan";
++		regulator-always-on;
++		regulator-boot-on;
++		vin-supply = <&vcc_sys>;
++	};
++};
++
++&cpu0 {
++	cpu-supply = <&vdd_arm>;
++};
++
++&cpu1 {
++	cpu-supply = <&vdd_arm>;
++};
++
++&cpu2 {
++	cpu-supply = <&vdd_arm>;
++};
++
++&cpu3 {
++	cpu-supply = <&vdd_arm>;
++};
++
++&display_subsystem {
++	status = "disabled";
++};
++
++&gmac2io {
++	assigned-clocks = <&cru SCLK_MAC2IO>, <&cru SCLK_MAC2IO_EXT>;
++	assigned-clock-parents = <&gmac_clk>, <&gmac_clk>;
++	clock_in_out = "input";
++	phy-handle = <&rtl8211e>;
++	phy-mode = "rgmii";
++	phy-supply = <&vcc_io>;
++	pinctrl-0 = <&rgmiim1_pins>;
++	pinctrl-names = "default";
++	snps,aal;
++	rx_delay = <0x18>;
++	tx_delay = <0x24>;
++	status = "okay";
++
++	mdio {
++		compatible = "snps,dwmac-mdio";
++		#address-cells = <1>;
++		#size-cells = <0>;
++
++		rtl8211e: ethernet-phy@1 {
++			reg = <1>;
++			pinctrl-0 = <&eth_phy_reset_pin>;
++			pinctrl-names = "default";
++			reset-assert-us = <10000>;
++			reset-deassert-us = <50000>;
++			reset-gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>;
++		};
++	};
++};
++
++&i2c1 {
++	status = "okay";
++
++	rk805: pmic@18 {
++		compatible = "rockchip,rk805";
++		reg = <0x18>;
++		interrupt-parent = <&gpio1>;
++		interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
++		#clock-cells = <1>;
++		clock-output-names = "xin32k", "rk805-clkout2";
++		gpio-controller;
++		#gpio-cells = <2>;
++		pinctrl-0 = <&pmic_int_l>;
++		pinctrl-names = "default";
++		rockchip,system-power-controller;
++		wakeup-source;
++
++		vcc1-supply = <&vcc_sys>;
++		vcc2-supply = <&vcc_sys>;
++		vcc3-supply = <&vcc_sys>;
++		vcc4-supply = <&vcc_sys>;
++		vcc5-supply = <&vcc_io>;
++		vcc6-supply = <&vcc_sys>;
++
++		regulators {
++			vdd_log: DCDC_REG1 {
++				regulator-name = "vdd_log";
++				regulator-always-on;
++				regulator-boot-on;
++				regulator-min-microvolt = <712500>;
++				regulator-max-microvolt = <1450000>;
++				regulator-ramp-delay = <12500>;
++
++				regulator-state-mem {
++					regulator-on-in-suspend;
++					regulator-suspend-microvolt = <1000000>;
++				};
++			};
++
++			vdd_arm: DCDC_REG2 {
++				regulator-name = "vdd_arm";
++				regulator-always-on;
++				regulator-boot-on;
++				regulator-min-microvolt = <712500>;
++				regulator-max-microvolt = <1450000>;
++				regulator-ramp-delay = <12500>;
++
++				regulator-state-mem {
++					regulator-on-in-suspend;
++					regulator-suspend-microvolt = <950000>;
++				};
++			};
++
++			vcc_ddr: DCDC_REG3 {
++				regulator-name = "vcc_ddr";
++				regulator-always-on;
++				regulator-boot-on;
++
++				regulator-state-mem {
++					regulator-on-in-suspend;
++				};
++			};
++
++			vcc_io: DCDC_REG4 {
++				regulator-name = "vcc_io";
++				regulator-always-on;
++				regulator-boot-on;
++				regulator-min-microvolt = <3300000>;
++				regulator-max-microvolt = <3300000>;
++
++				regulator-state-mem {
++					regulator-on-in-suspend;
++					regulator-suspend-microvolt = <3300000>;
++				};
++			};
++
++			vcc_18: LDO_REG1 {
++				regulator-name = "vcc_18";
++				regulator-always-on;
++				regulator-boot-on;
++				regulator-min-microvolt = <1800000>;
++				regulator-max-microvolt = <1800000>;
++
++				regulator-state-mem {
++					regulator-on-in-suspend;
++					regulator-suspend-microvolt = <1800000>;
++				};
++			};
++
++			vcc18_emmc: LDO_REG2 {
++				regulator-name = "vcc18_emmc";
++				regulator-always-on;
++				regulator-boot-on;
++				regulator-min-microvolt = <1800000>;
++				regulator-max-microvolt = <1800000>;
++
++				regulator-state-mem {
++					regulator-on-in-suspend;
++					regulator-suspend-microvolt = <1800000>;
++				};
++			};
++
++			vdd_10: LDO_REG3 {
++				regulator-name = "vdd_10";
++				regulator-always-on;
++				regulator-boot-on;
++				regulator-min-microvolt = <1000000>;
++				regulator-max-microvolt = <1000000>;
++
++				regulator-state-mem {
++					regulator-on-in-suspend;
++					regulator-suspend-microvolt = <1000000>;
++				};
++			};
++		};
++	};
++};
++
++&io_domains {
++	pmuio-supply = <&vcc_io>;
++	vccio1-supply = <&vcc_io>;
++	vccio2-supply = <&vcc18_emmc>;
++	vccio3-supply = <&vcc_io>;
++	vccio4-supply = <&vcc_io>;
++	vccio5-supply = <&vcc_io>;
++	vccio6-supply = <&vcc_io>;
++	status = "okay";
++};
++
++&pinctrl {
++	gmac2io {
++		eth_phy_reset_pin: eth-phy-reset-pin {
++			rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>;
++		};
++	};
++
++	leds {
++		lan_led_pin: lan-led-pin {
++			rockchip,pins = <2 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
++		};
++
++		sys_led_pin: sys-led-pin {
++			rockchip,pins = <3 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
++		};
++
++		wan_led_pin: wan-led-pin {
++			rockchip,pins = <2 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
++		};
++	};
++
++	lan {
++		lan_vdd_pin: lan-vdd-pin {
++			rockchip,pins = <2 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
++		};
++	};
++
++	pmic {
++		pmic_int_l: pmic-int-l {
++			rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_up>;
++		};
++	};
++};
++
++&pwm2 {
++	status = "okay";
++};
++
++&sdmmc {
++	bus-width = <4>;
++	cap-sd-highspeed;
++	disable-wp;
++	pinctrl-0 = <&sdmmc0_clk>, <&sdmmc0_cmd>, <&sdmmc0_dectn>, <&sdmmc0_bus4>;
++	pinctrl-names = "default";
++	vmmc-supply = <&vcc_sd>;
++	status = "okay";
++};
++
++&spi0 {
++	status = "okay";
++
++	flash@0 {
++		compatible = "jedec,spi-nor";
++		reg = <0>;
++		spi-max-frequency = <50000000>;
++	};
++};
++
++&tsadc {
++	rockchip,hw-tshut-mode = <0>;
++	rockchip,hw-tshut-polarity = <0>;
++	status = "okay";
++};
++
++&u2phy {
++	status = "okay";
++};
++
++&u2phy_host {
++	status = "okay";
++};
++
++&u2phy_otg {
++	status = "okay";
++};
++
++&uart2 {
++	status = "okay";
++};
++
++&usb20_otg {
++	dr_mode = "host";
++	status = "okay";
++};
++
++&usbdrd3 {
++	dr_mode = "host";
++	status = "okay";
++	#address-cells = <1>;
++	#size-cells = <0>;
++
++	/* Second port is for USB 3.0 */
++	rtl8153: device@2 {
++		compatible = "usbbda,8153";
++		reg = <2>;
++	};
++};
++
++&usb_host0_ehci {
++	status = "okay";
++};
++
++&usb_host0_ohci {
++	status = "okay";
++};

target/linux/rockchip/patches-6.1/008-v6.4-arm64-dts-rockchip-Add-Xunlong-OrangePi-R1-Plus-LTS.patch

@@ -0,0 +1,71 @@
+From 387b3bbac5ea6a0a105d685237f033ffe0f184f1 Mon Sep 17 00:00:00 2001
+From: Tianling Shen <[email protected]>
+Date: Sat, 25 Mar 2023 15:40:22 +0800
+Subject: [PATCH] arm64: dts: rockchip: Add Xunlong OrangePi R1 Plus LTS
+
+The OrangePi R1 Plus LTS is a minor variant of OrangePi R1 Plus with
+the on-board NIC chip changed from rtl8211e to yt8531c, and otherwise
+identical to OrangePi R1 Plus.
+
+Signed-off-by: Tianling Shen <[email protected]>
+Link: https://lore.kernel.org/r/[email protected]
+Signed-off-by: Heiko Stuebner <[email protected]>
+---
+ arch/arm64/boot/dts/rockchip/Makefile         |  1 +
+ .../rockchip/rk3328-orangepi-r1-plus-lts.dts  | 40 +++++++++++++++++++
+ 2 files changed, 41 insertions(+)
+ create mode 100644 arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus-lts.dts
+
+--- a/arch/arm64/boot/dts/rockchip/Makefile
++++ b/arch/arm64/boot/dts/rockchip/Makefile
+@@ -13,6 +13,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-ev
+ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-nanopi-r2c.dtb
+ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-nanopi-r2s.dtb
+ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-orangepi-r1-plus.dtb
++dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-orangepi-r1-plus-lts.dtb
+ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-rock64.dtb
+ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-rock-pi-e.dtb
+ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-roc-cc.dtb
+--- /dev/null
++++ b/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus-lts.dts
+@@ -0,0 +1,40 @@
++// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
++/*
++ * Copyright (c) 2016 Xunlong Software. Co., Ltd.
++ * (http://www.orangepi.org)
++ *
++ * Copyright (c) 2021-2023 Tianling Shen <[email protected]>
++ */
++
++/dts-v1/;
++#include "rk3328-orangepi-r1-plus.dts"
++
++/ {
++	model = "Xunlong Orange Pi R1 Plus LTS";
++	compatible = "xunlong,orangepi-r1-plus-lts", "rockchip,rk3328";
++};
++
++&gmac2io {
++	phy-handle = <&yt8531c>;
++	tx_delay = <0x19>;
++	rx_delay = <0x05>;
++
++	mdio {
++		/delete-node/ ethernet-phy@1;
++
++		yt8531c: ethernet-phy@0 {
++			compatible = "ethernet-phy-ieee802.3-c22";
++			reg = <0>;
++
++			motorcomm,clk-out-frequency-hz = <125000000>;
++			motorcomm,keep-pll-enabled;
++			motorcomm,auto-sleep-disabled;
++
++			pinctrl-0 = <&eth_phy_reset_pin>;
++			pinctrl-names = "default";
++			reset-assert-us = <15000>;
++			reset-deassert-us = <50000>;
++			reset-gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>;
++		};
++	};
++};

target/linux/rockchip/patches-6.1/009-v6.4-arm64-dts-rockchip-Add-FriendlyElec-Nanopi-R5S.patch

@@ -0,0 +1,754 @@
+From c6629b9a6738a64507478527da6c7b83c10a6d2c Mon Sep 17 00:00:00 2001
+From: Vasily Khoruzhick <[email protected]>
+Date: Tue, 7 Mar 2023 22:32:40 -0800
+Subject: [PATCH] arm64: dts: rockchip: Add FriendlyElec Nanopi R5S
+
+FriendlyElec Nanopi R5S is an open-sourced mini IoT gateway device.
+
+Board Specifications
+- Rockchip RK3568
+- 2 or 4GB LPDDR4X
+- 8GB or 16GB eMMC, SD card slot
+- GbE LAN (Native)
+- 2x 2.5G LAN (PCIe)
+- M.2 Connector
+- HDMI 2.0, MIPI DSI/CSI
+- 2xUSB 3.0 Host
+- USB Type C PD, 5V/9V/12V
+- GPIO: 12-pin 0.5mm FPC connector
+
+Based on Tianling Shen's <[email protected]> work.
+
+Signed-off-by: Vasily Khoruzhick <[email protected]>
+Link: https://lore.kernel.org/r/[email protected]
+Signed-off-by: Heiko Stuebner <[email protected]>
+---
+ arch/arm64/boot/dts/rockchip/Makefile         |   1 +
+ .../boot/dts/rockchip/rk3568-nanopi-r5s.dts   | 713 ++++++++++++++++++
+ 2 files changed, 714 insertions(+)
+ create mode 100644 arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts
+
+--- a/arch/arm64/boot/dts/rockchip/Makefile
++++ b/arch/arm64/boot/dts/rockchip/Makefile
+@@ -74,4 +74,5 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-ro
+ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-soquartz-cm4.dtb
+ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-bpi-r2-pro.dtb
+ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-evb1-v10.dtb
++dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-nanopi-r5s.dtb
+ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-rock-3a.dtb
+--- /dev/null
++++ b/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts
+@@ -0,0 +1,713 @@
++// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
++/*
++ * Copyright (c) 2022 FriendlyElec Computer Tech. Co., Ltd.
++ * (http://www.friendlyelec.com)
++ *
++ * Copyright (c) 2023 Tianling Shen <[email protected]>
++ */
++
++/dts-v1/;
++#include <dt-bindings/gpio/gpio.h>
++#include <dt-bindings/input/input.h>
++#include <dt-bindings/leds/common.h>
++#include <dt-bindings/pinctrl/rockchip.h>
++#include <dt-bindings/soc/rockchip,vop2.h>
++#include "rk3568.dtsi"
++
++/ {
++	model = "FriendlyElec NanoPi R5S";
++	compatible = "friendlyarm,nanopi-r5s", "rockchip,rk3568";
++
++	aliases {
++		ethernet0 = &gmac0;
++		mmc0 = &sdmmc0;
++		mmc1 = &sdhci;
++	};
++
++	chosen: chosen {
++		stdout-path = "serial2:1500000n8";
++	};
++
++	hdmi-con {
++		compatible = "hdmi-connector";
++		type = "a";
++
++		port {
++			hdmi_con_in: endpoint {
++				remote-endpoint = <&hdmi_out_con>;
++			};
++		};
++	};
++
++	gpio-leds {
++		compatible = "gpio-leds";
++		pinctrl-names = "default";
++		pinctrl-0 = <&lan1_led_pin>, <&lan2_led_pin>, <&power_led_pin>, <&wan_led_pin>;
++
++		led-lan1 {
++			color = <LED_COLOR_ID_GREEN>;
++			function = LED_FUNCTION_LAN;
++			function-enumerator = <1>;
++			gpios = <&gpio3 RK_PD6 GPIO_ACTIVE_HIGH>;
++		};
++
++		led-lan2 {
++			color = <LED_COLOR_ID_GREEN>;
++			function = LED_FUNCTION_LAN;
++			function-enumerator = <2>;
++			gpios = <&gpio3 RK_PD7 GPIO_ACTIVE_HIGH>;
++		};
++
++		power_led: led-power {
++			color = <LED_COLOR_ID_RED>;
++			function = LED_FUNCTION_POWER;
++			linux,default-trigger = "heartbeat";
++			gpios = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>;
++		};
++
++		led-wan {
++			color = <LED_COLOR_ID_GREEN>;
++			function = LED_FUNCTION_WAN;
++			gpios = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>;
++		};
++	};
++
++	vdd_usbc: vdd-usbc-regulator {
++		compatible = "regulator-fixed";
++		regulator-name = "vdd_usbc";
++		regulator-always-on;
++		regulator-boot-on;
++		regulator-min-microvolt = <5000000>;
++		regulator-max-microvolt = <5000000>;
++	};
++
++	vcc3v3_sys: vcc3v3-sys-regulator {
++		compatible = "regulator-fixed";
++		regulator-name = "vcc3v3_sys";
++		regulator-always-on;
++		regulator-boot-on;
++		regulator-min-microvolt = <3300000>;
++		regulator-max-microvolt = <3300000>;
++		vin-supply = <&vdd_usbc>;
++	};
++
++	vcc5v0_sys: vcc5v0-sys-regulator {
++		compatible = "regulator-fixed";
++		regulator-name = "vcc5v0_sys";
++		regulator-always-on;
++		regulator-boot-on;
++		regulator-min-microvolt = <5000000>;
++		regulator-max-microvolt = <5000000>;
++		vin-supply = <&vdd_usbc>;
++	};
++
++	vcc3v3_pcie: vcc3v3-pcie-regulator {
++		compatible = "regulator-fixed";
++		regulator-name = "vcc3v3_pcie";
++		regulator-min-microvolt = <3300000>;
++		regulator-max-microvolt = <3300000>;
++		enable-active-high;
++		gpios = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>;
++		startup-delay-us = <200000>;
++		vin-supply = <&vcc5v0_sys>;
++	};
++
++	vcc5v0_usb: vcc5v0-usb-regulator {
++		compatible = "regulator-fixed";
++		regulator-name = "vcc5v0_usb";
++		regulator-always-on;
++		regulator-boot-on;
++		regulator-min-microvolt = <5000000>;
++		regulator-max-microvolt = <5000000>;
++		vin-supply = <&vdd_usbc>;
++	};
++
++	vcc5v0_usb_host: vcc5v0-usb-host-regulator {
++		compatible = "regulator-fixed";
++		enable-active-high;
++		gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
++		pinctrl-names = "default";
++		pinctrl-0 = <&vcc5v0_usb_host_en>;
++		regulator-name = "vcc5v0_usb_host";
++		regulator-always-on;
++		regulator-boot-on;
++		regulator-min-microvolt = <5000000>;
++		regulator-max-microvolt = <5000000>;
++		vin-supply = <&vcc5v0_usb>;
++	};
++
++	vcc5v0_usb_otg: vcc5v0-usb-otg-regulator {
++		compatible = "regulator-fixed";
++		enable-active-high;
++		gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
++		pinctrl-names = "default";
++		pinctrl-0 = <&vcc5v0_usb_otg_en>;
++		regulator-name = "vcc5v0_usb_otg";
++		regulator-min-microvolt = <5000000>;
++		regulator-max-microvolt = <5000000>;
++		vin-supply = <&vcc5v0_usb>;
++	};
++
++	pcie30_avdd0v9: pcie30-avdd0v9-regulator {
++		compatible = "regulator-fixed";
++		regulator-name = "pcie30_avdd0v9";
++		regulator-always-on;
++		regulator-boot-on;
++		regulator-min-microvolt = <900000>;
++		regulator-max-microvolt = <900000>;
++		vin-supply = <&vcc3v3_sys>;
++	};
++
++	pcie30_avdd1v8: pcie30-avdd1v8-regulator {
++		compatible = "regulator-fixed";
++		regulator-name = "pcie30_avdd1v8";
++		regulator-always-on;
++		regulator-boot-on;
++		regulator-min-microvolt = <1800000>;
++		regulator-max-microvolt = <1800000>;
++		vin-supply = <&vcc3v3_sys>;
++	};
++};
++
++&combphy0 {
++	status = "okay";
++};
++
++&combphy1 {
++	status = "okay";
++};
++
++&combphy2 {
++	status = "okay";
++};
++
++&cpu0 {
++	cpu-supply = <&vdd_cpu>;
++};
++
++&cpu1 {
++	cpu-supply = <&vdd_cpu>;
++};
++
++&cpu2 {
++	cpu-supply = <&vdd_cpu>;
++};
++
++&cpu3 {
++	cpu-supply = <&vdd_cpu>;
++};
++
++&gmac0 {
++	assigned-clocks = <&cru SCLK_GMAC0_RX_TX>, <&cru SCLK_GMAC0>;
++	assigned-clock-parents = <&cru SCLK_GMAC0_RGMII_SPEED>, <&cru CLK_MAC0_2TOP>;
++	assigned-clock-rates = <0>, <125000000>;
++	clock_in_out = "output";
++	phy-handle = <&rgmii_phy0>;
++	phy-mode = "rgmii-id";
++	pinctrl-names = "default";
++	pinctrl-0 = <&gmac0_miim
++		     &gmac0_tx_bus2
++		     &gmac0_rx_bus2
++		     &gmac0_rgmii_clk
++		     &gmac0_rgmii_bus>;
++	snps,reset-gpio = <&gpio0 RK_PC5 GPIO_ACTIVE_LOW>;
++	snps,reset-active-low;
++	/* Reset time is 15ms, 50ms for rtl8211f */
++	snps,reset-delays-us = <0 15000 50000>;
++	tx_delay = <0x3c>;
++	rx_delay = <0x2f>;
++	status = "okay";
++};
++
++&gpu {
++	mali-supply = <&vdd_gpu>;
++	status = "okay";
++};
++
++&hdmi {
++	avdd-0v9-supply = <&vdda0v9_image>;
++	avdd-1v8-supply = <&vcca1v8_image>;
++	status = "okay";
++};
++
++&hdmi_in {
++	hdmi_in_vp0: endpoint {
++		remote-endpoint = <&vp0_out_hdmi>;
++	};
++};
++
++&hdmi_out {
++	hdmi_out_con: endpoint {
++		remote-endpoint = <&hdmi_con_in>;
++	};
++};
++
++&hdmi_sound {
++	status = "okay";
++};
++
++&i2c0 {
++	status = "okay";
++
++	vdd_cpu: regulator@1c {
++		compatible = "tcs,tcs4525";
++		reg = <0x1c>;
++		fcs,suspend-voltage-selector = <1>;
++		regulator-name = "vdd_cpu";
++		regulator-always-on;
++		regulator-boot-on;
++		regulator-min-microvolt = <800000>;
++		regulator-max-microvolt = <1150000>;
++		regulator-ramp-delay = <2300>;
++		vin-supply = <&vcc5v0_sys>;
++
++		regulator-state-mem {
++			regulator-off-in-suspend;
++		};
++	};
++
++	rk809: pmic@20 {
++		compatible = "rockchip,rk809";
++		reg = <0x20>;
++		interrupt-parent = <&gpio0>;
++		interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
++		#clock-cells = <1>;
++		pinctrl-names = "default";
++		pinctrl-0 = <&pmic_int>;
++		rockchip,system-power-controller;
++		vcc1-supply = <&vcc3v3_sys>;
++		vcc2-supply = <&vcc3v3_sys>;
++		vcc3-supply = <&vcc3v3_sys>;
++		vcc4-supply = <&vcc3v3_sys>;
++		vcc5-supply = <&vcc3v3_sys>;
++		vcc6-supply = <&vcc3v3_sys>;
++		vcc7-supply = <&vcc3v3_sys>;
++		vcc8-supply = <&vcc3v3_sys>;
++		vcc9-supply = <&vcc3v3_sys>;
++		wakeup-source;
++
++		regulators {
++			vdd_logic: DCDC_REG1 {
++				regulator-name = "vdd_logic";
++				regulator-always-on;
++				regulator-boot-on;
++				regulator-init-microvolt = <900000>;
++				regulator-initial-mode = <0x2>;
++				regulator-min-microvolt = <500000>;
++				regulator-max-microvolt = <1350000>;
++				regulator-ramp-delay = <6001>;
++
++				regulator-state-mem {
++					regulator-off-in-suspend;
++				};
++			};
++
++			vdd_gpu: DCDC_REG2 {
++				regulator-name = "vdd_gpu";
++				regulator-always-on;
++				regulator-init-microvolt = <900000>;
++				regulator-initial-mode = <0x2>;
++				regulator-min-microvolt = <500000>;
++				regulator-max-microvolt = <1350000>;
++				regulator-ramp-delay = <6001>;
++
++				regulator-state-mem {
++					regulator-off-in-suspend;
++				};
++			};
++
++			vcc_ddr: DCDC_REG3 {
++				regulator-name = "vcc_ddr";
++				regulator-always-on;
++				regulator-boot-on;
++				regulator-initial-mode = <0x2>;
++
++				regulator-state-mem {
++					regulator-on-in-suspend;
++				};
++			};
++
++			vdd_npu: DCDC_REG4 {
++				regulator-name = "vdd_npu";
++				regulator-init-microvolt = <900000>;
++				regulator-initial-mode = <0x2>;
++				regulator-min-microvolt = <500000>;
++				regulator-max-microvolt = <1350000>;
++				regulator-ramp-delay = <6001>;
++
++				regulator-state-mem {
++					regulator-off-in-suspend;
++				};
++			};
++
++			vcc_1v8: DCDC_REG5 {
++				regulator-name = "vcc_1v8";
++				regulator-always-on;
++				regulator-boot-on;
++				regulator-min-microvolt = <1800000>;
++				regulator-max-microvolt = <1800000>;
++
++				regulator-state-mem {
++					regulator-off-in-suspend;
++				};
++			};
++
++			vdda0v9_image: LDO_REG1 {
++				regulator-name = "vdda0v9_image";
++				regulator-min-microvolt = <950000>;
++				regulator-max-microvolt = <950000>;
++
++				regulator-state-mem {
++					regulator-off-in-suspend;
++				};
++			};
++
++			vdda_0v9: LDO_REG2 {
++				regulator-name = "vdda_0v9";
++				regulator-always-on;
++				regulator-boot-on;
++				regulator-min-microvolt = <900000>;
++				regulator-max-microvolt = <900000>;
++
++				regulator-state-mem {
++					regulator-off-in-suspend;
++				};
++			};
++
++			vdda0v9_pmu: LDO_REG3 {
++				regulator-name = "vdda0v9_pmu";
++				regulator-always-on;
++				regulator-boot-on;
++				regulator-min-microvolt = <900000>;
++				regulator-max-microvolt = <900000>;
++
++				regulator-state-mem {
++					regulator-on-in-suspend;
++					regulator-suspend-microvolt = <900000>;
++				};
++			};
++
++			vccio_acodec: LDO_REG4 {
++				regulator-name = "vccio_acodec";
++				regulator-always-on;
++				regulator-min-microvolt = <3300000>;
++				regulator-max-microvolt = <3300000>;
++
++				regulator-state-mem {
++					regulator-off-in-suspend;
++				};
++			};
++
++			vccio_sd: LDO_REG5 {
++				regulator-name = "vccio_sd";
++				regulator-min-microvolt = <1800000>;
++				regulator-max-microvolt = <3300000>;
++
++				regulator-state-mem {
++					regulator-off-in-suspend;
++				};
++			};
++
++			vcc3v3_pmu: LDO_REG6 {
++				regulator-name = "vcc3v3_pmu";
++				regulator-always-on;
++				regulator-boot-on;
++				regulator-min-microvolt = <3300000>;
++				regulator-max-microvolt = <3300000>;
++
++				regulator-state-mem {
++					regulator-on-in-suspend;
++					regulator-suspend-microvolt = <3300000>;
++				};
++			};
++
++			vcca_1v8: LDO_REG7 {
++				regulator-name = "vcca_1v8";
++				regulator-always-on;
++				regulator-boot-on;
++				regulator-min-microvolt = <1800000>;
++				regulator-max-microvolt = <1800000>;
++
++				regulator-state-mem {
++					regulator-off-in-suspend;
++				};
++			};
++
++			vcca1v8_pmu: LDO_REG8 {
++				regulator-name = "vcca1v8_pmu";
++				regulator-always-on;
++				regulator-boot-on;
++				regulator-min-microvolt = <1800000>;
++				regulator-max-microvolt = <1800000>;
++
++				regulator-state-mem {
++					regulator-on-in-suspend;
++					regulator-suspend-microvolt = <1800000>;
++				};
++			};
++
++			vcca1v8_image: LDO_REG9 {
++				regulator-name = "vcca1v8_image";
++				regulator-min-microvolt = <1800000>;
++				regulator-max-microvolt = <1800000>;
++
++				regulator-state-mem {
++					regulator-off-in-suspend;
++				};
++			};
++
++			vcc_3v3: SWITCH_REG1 {
++				regulator-name = "vcc_3v3";
++				regulator-always-on;
++				regulator-boot-on;
++
++				regulator-state-mem {
++					regulator-off-in-suspend;
++				};
++			};
++
++			vcc3v3_sd: SWITCH_REG2 {
++				regulator-name = "vcc3v3_sd";
++				regulator-always-on;
++				regulator-boot-on;
++
++				regulator-state-mem {
++					regulator-off-in-suspend;
++				};
++			};
++		};
++
++	};
++};
++
++&i2c5 {
++	status = "okay";
++
++	hym8563: rtc@51 {
++		compatible = "haoyu,hym8563";
++		reg = <0x51>;
++		interrupt-parent = <&gpio0>;
++		interrupts = <RK_PD3 IRQ_TYPE_LEVEL_LOW>;
++		#clock-cells = <0>;
++		clock-output-names = "rtcic_32kout";
++		pinctrl-names = "default";
++		pinctrl-0 = <&hym8563_int>;
++		wakeup-source;
++	};
++};
++
++&i2s0_8ch {
++	status = "okay";
++};
++
++&i2s1_8ch {
++	rockchip,trcm-sync-tx-only;
++	status = "okay";
++};
++
++&mdio0 {
++	rgmii_phy0: ethernet-phy@1 {
++		compatible = "ethernet-phy-ieee802.3-c22";
++		reg = <1>;
++		pinctrl-0 = <&eth_phy0_reset_pin>;
++		pinctrl-names = "default";
++		reset-assert-us = <10000>;
++		reset-deassert-us = <50000>;
++		reset-gpios = <&gpio0 RK_PC4 GPIO_ACTIVE_LOW>;
++	};
++};
++
++&pcie2x1 {
++	num-lanes = <1>;
++	reset-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>;
++	status = "okay";
++};
++
++&pcie30phy {
++	data-lanes = <1 2>;
++	status = "okay";
++};
++
++&pcie3x1 {
++	num-lanes = <1>;
++	reset-gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>;
++	vpcie3v3-supply = <&vcc3v3_pcie>;
++	status = "okay";
++};
++
++&pcie3x2 {
++	num-lanes = <1>;
++	num-ib-windows = <8>;
++	num-ob-windows = <8>;
++	reset-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>;
++	vpcie3v3-supply = <&vcc3v3_pcie>;
++	status = "okay";
++};
++
++&pinctrl {
++	gmac0 {
++		eth_phy0_reset_pin: eth-phy0-reset-pin {
++			rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_down>;
++		};
++	};
++
++	gpio-leds {
++		lan1_led_pin: lan1-led-pin {
++			rockchip,pins = <3 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>;
++		};
++
++		lan2_led_pin: lan2-led-pin {
++			rockchip,pins = <3 RK_PD7 RK_FUNC_GPIO &pcfg_pull_none>;
++		};
++
++		power_led_pin: power-led-pin {
++			rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
++		};
++
++		wan_led_pin: wan-led-pin {
++			rockchip,pins = <2 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
++		};
++	};
++
++	hym8563 {
++		hym8563_int: hym8563-int {
++			rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up>;
++		};
++	};
++
++	pmic {
++		pmic_int: pmic-int {
++			rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
++		};
++	};
++
++	usb {
++		vcc5v0_usb_host_en: vcc5v0-usb-host-en {
++			rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
++		};
++
++		vcc5v0_usb_otg_en: vcc5v0-usb-otg-en {
++			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
++		};
++	};
++};
++
++&pmu_io_domains {
++	pmuio1-supply = <&vcc3v3_pmu>;
++	pmuio2-supply = <&vcc3v3_pmu>;
++	vccio1-supply = <&vccio_acodec>;
++	vccio3-supply = <&vccio_sd>;
++	vccio4-supply = <&vcc_1v8>;
++	vccio5-supply = <&vcc_3v3>;
++	vccio6-supply = <&vcc_1v8>;
++	vccio7-supply = <&vcc_3v3>;
++	status = "okay";
++};
++
++&saradc {
++	vref-supply = <&vcca_1v8>;
++	status = "okay";
++};
++
++&sdhci {
++	bus-width = <8>;
++	max-frequency = <200000000>;
++	non-removable;
++	pinctrl-names = "default";
++	pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd>;
++	status = "okay";
++};
++
++&sdmmc0 {
++	max-frequency = <150000000>;
++	no-sdio;
++	no-mmc;
++	bus-width = <4>;
++	cap-mmc-highspeed;
++	cap-sd-highspeed;
++	disable-wp;
++	vmmc-supply = <&vcc3v3_sd>;
++	vqmmc-supply = <&vccio_sd>;
++	pinctrl-names = "default";
++	pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
++	status = "okay";
++};
++
++&tsadc {
++	rockchip,hw-tshut-mode = <1>;
++	rockchip,hw-tshut-polarity = <0>;
++	status = "okay";
++};
++
++&uart2 {
++	status = "okay";
++};
++
++&usb_host0_ehci {
++	status = "okay";
++};
++
++&usb_host0_ohci {
++	status = "okay";
++};
++
++&usb_host0_xhci {
++	extcon = <&usb2phy0>;
++	dr_mode = "host";
++	status = "okay";
++};
++
++&usb_host1_ehci {
++	status = "okay";
++};
++
++&usb_host1_ohci {
++	status = "okay";
++};
++
++&usb_host1_xhci {
++	status = "okay";
++};
++
++&usb2phy0 {
++	status = "okay";
++};
++
++&usb2phy0_host {
++	phy-supply = <&vcc5v0_usb_host>;
++	status = "okay";
++};
++
++&usb2phy0_otg {
++	status = "okay";
++};
++
++&usb2phy1 {
++	status = "okay";
++};
++
++&usb2phy1_host {
++	phy-supply = <&vcc5v0_usb_otg>;
++	status = "okay";
++};
++
++&usb2phy1_otg {
++	status = "okay";
++};
++
++&vop {
++	assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
++	assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
++	status = "okay";
++};
++
++&vop_mmu {
++	status = "okay";
++};
++
++&vp0 {
++	vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
++		reg = <ROCKCHIP_VOP2_EP_HDMI0>;
++		remote-endpoint = <&hdmi_in_vp0>;
++	};
++};

target/linux/rockchip/patches-6.1/010-v6.4-arm64-dts-rockchip-create-common-dtsi-for-NanoPi-R5-serie.patch

@@ -0,0 +1,1226 @@
+From c8ec73b05a95d9f0969ae0f28dd8799a54fcdfc7 Mon Sep 17 00:00:00 2001
+From: Tianling Shen <[email protected]>
+Date: Sat, 18 Mar 2023 16:37:41 +0800
+Subject: [PATCH] arm64: dts: rockchip: create common dtsi for NanoPi R5 series
+
+Create common dtsi for the FriendlyElec NanoPi R5 series.
+
+Signed-off-by: Tianling Shen <[email protected]>
+Link: https://lore.kernel.org/r/[email protected]
+Signed-off-by: Heiko Stuebner <[email protected]>
+---
+ .../boot/dts/rockchip/rk3568-nanopi-r5s.dts   | 575 +----------------
+ .../boot/dts/rockchip/rk3568-nanopi-r5s.dtsi  | 596 ++++++++++++++++++
+ 2 files changed, 597 insertions(+), 574 deletions(-)
+ create mode 100644 arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dtsi
+
+--- a/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts
++++ b/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts
+@@ -7,12 +7,7 @@
+  */
+ 
+ /dts-v1/;
+-#include <dt-bindings/gpio/gpio.h>
+-#include <dt-bindings/input/input.h>
+-#include <dt-bindings/leds/common.h>
+-#include <dt-bindings/pinctrl/rockchip.h>
+-#include <dt-bindings/soc/rockchip,vop2.h>
+-#include "rk3568.dtsi"
++#include "rk3568-nanopi-r5s.dtsi"
+ 
+ / {
+ 	model = "FriendlyElec NanoPi R5S";
+@@ -20,23 +15,6 @@
+ 
+ 	aliases {
+ 		ethernet0 = &gmac0;
+-		mmc0 = &sdmmc0;
+-		mmc1 = &sdhci;
+-	};
+-
+-	chosen: chosen {
+-		stdout-path = "serial2:1500000n8";
+-	};
+-
+-	hdmi-con {
+-		compatible = "hdmi-connector";
+-		type = "a";
+-
+-		port {
+-			hdmi_con_in: endpoint {
+-				remote-endpoint = <&hdmi_out_con>;
+-			};
+-		};
+ 	};
+ 
+ 	gpio-leds {
+@@ -71,130 +49,6 @@
+ 			gpios = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>;
+ 		};
+ 	};
+-
+-	vdd_usbc: vdd-usbc-regulator {
+-		compatible = "regulator-fixed";
+-		regulator-name = "vdd_usbc";
+-		regulator-always-on;
+-		regulator-boot-on;
+-		regulator-min-microvolt = <5000000>;
+-		regulator-max-microvolt = <5000000>;
+-	};
+-
+-	vcc3v3_sys: vcc3v3-sys-regulator {
+-		compatible = "regulator-fixed";
+-		regulator-name = "vcc3v3_sys";
+-		regulator-always-on;
+-		regulator-boot-on;
+-		regulator-min-microvolt = <3300000>;
+-		regulator-max-microvolt = <3300000>;
+-		vin-supply = <&vdd_usbc>;
+-	};
+-
+-	vcc5v0_sys: vcc5v0-sys-regulator {
+-		compatible = "regulator-fixed";
+-		regulator-name = "vcc5v0_sys";
+-		regulator-always-on;
+-		regulator-boot-on;
+-		regulator-min-microvolt = <5000000>;
+-		regulator-max-microvolt = <5000000>;
+-		vin-supply = <&vdd_usbc>;
+-	};
+-
+-	vcc3v3_pcie: vcc3v3-pcie-regulator {
+-		compatible = "regulator-fixed";
+-		regulator-name = "vcc3v3_pcie";
+-		regulator-min-microvolt = <3300000>;
+-		regulator-max-microvolt = <3300000>;
+-		enable-active-high;
+-		gpios = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>;
+-		startup-delay-us = <200000>;
+-		vin-supply = <&vcc5v0_sys>;
+-	};
+-
+-	vcc5v0_usb: vcc5v0-usb-regulator {
+-		compatible = "regulator-fixed";
+-		regulator-name = "vcc5v0_usb";
+-		regulator-always-on;
+-		regulator-boot-on;
+-		regulator-min-microvolt = <5000000>;
+-		regulator-max-microvolt = <5000000>;
+-		vin-supply = <&vdd_usbc>;
+-	};
+-
+-	vcc5v0_usb_host: vcc5v0-usb-host-regulator {
+-		compatible = "regulator-fixed";
+-		enable-active-high;
+-		gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
+-		pinctrl-names = "default";
+-		pinctrl-0 = <&vcc5v0_usb_host_en>;
+-		regulator-name = "vcc5v0_usb_host";
+-		regulator-always-on;
+-		regulator-boot-on;
+-		regulator-min-microvolt = <5000000>;
+-		regulator-max-microvolt = <5000000>;
+-		vin-supply = <&vcc5v0_usb>;
+-	};
+-
+-	vcc5v0_usb_otg: vcc5v0-usb-otg-regulator {
+-		compatible = "regulator-fixed";
+-		enable-active-high;
+-		gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
+-		pinctrl-names = "default";
+-		pinctrl-0 = <&vcc5v0_usb_otg_en>;
+-		regulator-name = "vcc5v0_usb_otg";
+-		regulator-min-microvolt = <5000000>;
+-		regulator-max-microvolt = <5000000>;
+-		vin-supply = <&vcc5v0_usb>;
+-	};
+-
+-	pcie30_avdd0v9: pcie30-avdd0v9-regulator {
+-		compatible = "regulator-fixed";
+-		regulator-name = "pcie30_avdd0v9";
+-		regulator-always-on;
+-		regulator-boot-on;
+-		regulator-min-microvolt = <900000>;
+-		regulator-max-microvolt = <900000>;
+-		vin-supply = <&vcc3v3_sys>;
+-	};
+-
+-	pcie30_avdd1v8: pcie30-avdd1v8-regulator {
+-		compatible = "regulator-fixed";
+-		regulator-name = "pcie30_avdd1v8";
+-		regulator-always-on;
+-		regulator-boot-on;
+-		regulator-min-microvolt = <1800000>;
+-		regulator-max-microvolt = <1800000>;
+-		vin-supply = <&vcc3v3_sys>;
+-	};
+-};
+-
+-&combphy0 {
+-	status = "okay";
+-};
+-
+-&combphy1 {
+-	status = "okay";
+-};
+-
+-&combphy2 {
+-	status = "okay";
+-};
+-
+-&cpu0 {
+-	cpu-supply = <&vdd_cpu>;
+-};
+-
+-&cpu1 {
+-	cpu-supply = <&vdd_cpu>;
+-};
+-
+-&cpu2 {
+-	cpu-supply = <&vdd_cpu>;
+-};
+-
+-&cpu3 {
+-	cpu-supply = <&vdd_cpu>;
+ };
+ 
+ &gmac0 {
+@@ -219,292 +73,6 @@
+ 	status = "okay";
+ };
+ 
+-&gpu {
+-	mali-supply = <&vdd_gpu>;
+-	status = "okay";
+-};
+-
+-&hdmi {
+-	avdd-0v9-supply = <&vdda0v9_image>;
+-	avdd-1v8-supply = <&vcca1v8_image>;
+-	status = "okay";
+-};
+-
+-&hdmi_in {
+-	hdmi_in_vp0: endpoint {
+-		remote-endpoint = <&vp0_out_hdmi>;
+-	};
+-};
+-
+-&hdmi_out {
+-	hdmi_out_con: endpoint {
+-		remote-endpoint = <&hdmi_con_in>;
+-	};
+-};
+-
+-&hdmi_sound {
+-	status = "okay";
+-};
+-
+-&i2c0 {
+-	status = "okay";
+-
+-	vdd_cpu: regulator@1c {
+-		compatible = "tcs,tcs4525";
+-		reg = <0x1c>;
+-		fcs,suspend-voltage-selector = <1>;
+-		regulator-name = "vdd_cpu";
+-		regulator-always-on;
+-		regulator-boot-on;
+-		regulator-min-microvolt = <800000>;
+-		regulator-max-microvolt = <1150000>;
+-		regulator-ramp-delay = <2300>;
+-		vin-supply = <&vcc5v0_sys>;
+-
+-		regulator-state-mem {
+-			regulator-off-in-suspend;
+-		};
+-	};
+-
+-	rk809: pmic@20 {
+-		compatible = "rockchip,rk809";
+-		reg = <0x20>;
+-		interrupt-parent = <&gpio0>;
+-		interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
+-		#clock-cells = <1>;
+-		pinctrl-names = "default";
+-		pinctrl-0 = <&pmic_int>;
+-		rockchip,system-power-controller;
+-		vcc1-supply = <&vcc3v3_sys>;
+-		vcc2-supply = <&vcc3v3_sys>;
+-		vcc3-supply = <&vcc3v3_sys>;
+-		vcc4-supply = <&vcc3v3_sys>;
+-		vcc5-supply = <&vcc3v3_sys>;
+-		vcc6-supply = <&vcc3v3_sys>;
+-		vcc7-supply = <&vcc3v3_sys>;
+-		vcc8-supply = <&vcc3v3_sys>;
+-		vcc9-supply = <&vcc3v3_sys>;
+-		wakeup-source;
+-
+-		regulators {
+-			vdd_logic: DCDC_REG1 {
+-				regulator-name = "vdd_logic";
+-				regulator-always-on;
+-				regulator-boot-on;
+-				regulator-init-microvolt = <900000>;
+-				regulator-initial-mode = <0x2>;
+-				regulator-min-microvolt = <500000>;
+-				regulator-max-microvolt = <1350000>;
+-				regulator-ramp-delay = <6001>;
+-
+-				regulator-state-mem {
+-					regulator-off-in-suspend;
+-				};
+-			};
+-
+-			vdd_gpu: DCDC_REG2 {
+-				regulator-name = "vdd_gpu";
+-				regulator-always-on;
+-				regulator-init-microvolt = <900000>;
+-				regulator-initial-mode = <0x2>;
+-				regulator-min-microvolt = <500000>;
+-				regulator-max-microvolt = <1350000>;
+-				regulator-ramp-delay = <6001>;
+-
+-				regulator-state-mem {
+-					regulator-off-in-suspend;
+-				};
+-			};
+-
+-			vcc_ddr: DCDC_REG3 {
+-				regulator-name = "vcc_ddr";
+-				regulator-always-on;
+-				regulator-boot-on;
+-				regulator-initial-mode = <0x2>;
+-
+-				regulator-state-mem {
+-					regulator-on-in-suspend;
+-				};
+-			};
+-
+-			vdd_npu: DCDC_REG4 {
+-				regulator-name = "vdd_npu";
+-				regulator-init-microvolt = <900000>;
+-				regulator-initial-mode = <0x2>;
+-				regulator-min-microvolt = <500000>;
+-				regulator-max-microvolt = <1350000>;
+-				regulator-ramp-delay = <6001>;
+-
+-				regulator-state-mem {
+-					regulator-off-in-suspend;
+-				};
+-			};
+-
+-			vcc_1v8: DCDC_REG5 {
+-				regulator-name = "vcc_1v8";
+-				regulator-always-on;
+-				regulator-boot-on;
+-				regulator-min-microvolt = <1800000>;
+-				regulator-max-microvolt = <1800000>;
+-
+-				regulator-state-mem {
+-					regulator-off-in-suspend;
+-				};
+-			};
+-
+-			vdda0v9_image: LDO_REG1 {
+-				regulator-name = "vdda0v9_image";
+-				regulator-min-microvolt = <950000>;
+-				regulator-max-microvolt = <950000>;
+-
+-				regulator-state-mem {
+-					regulator-off-in-suspend;
+-				};
+-			};
+-
+-			vdda_0v9: LDO_REG2 {
+-				regulator-name = "vdda_0v9";
+-				regulator-always-on;
+-				regulator-boot-on;
+-				regulator-min-microvolt = <900000>;
+-				regulator-max-microvolt = <900000>;
+-
+-				regulator-state-mem {
+-					regulator-off-in-suspend;
+-				};
+-			};
+-
+-			vdda0v9_pmu: LDO_REG3 {
+-				regulator-name = "vdda0v9_pmu";
+-				regulator-always-on;
+-				regulator-boot-on;
+-				regulator-min-microvolt = <900000>;
+-				regulator-max-microvolt = <900000>;
+-
+-				regulator-state-mem {
+-					regulator-on-in-suspend;
+-					regulator-suspend-microvolt = <900000>;
+-				};
+-			};
+-
+-			vccio_acodec: LDO_REG4 {
+-				regulator-name = "vccio_acodec";
+-				regulator-always-on;
+-				regulator-min-microvolt = <3300000>;
+-				regulator-max-microvolt = <3300000>;
+-
+-				regulator-state-mem {
+-					regulator-off-in-suspend;
+-				};
+-			};
+-
+-			vccio_sd: LDO_REG5 {
+-				regulator-name = "vccio_sd";
+-				regulator-min-microvolt = <1800000>;
+-				regulator-max-microvolt = <3300000>;
+-
+-				regulator-state-mem {
+-					regulator-off-in-suspend;
+-				};
+-			};
+-
+-			vcc3v3_pmu: LDO_REG6 {
+-				regulator-name = "vcc3v3_pmu";
+-				regulator-always-on;
+-				regulator-boot-on;
+-				regulator-min-microvolt = <3300000>;
+-				regulator-max-microvolt = <3300000>;
+-
+-				regulator-state-mem {
+-					regulator-on-in-suspend;
+-					regulator-suspend-microvolt = <3300000>;
+-				};
+-			};
+-
+-			vcca_1v8: LDO_REG7 {
+-				regulator-name = "vcca_1v8";
+-				regulator-always-on;
+-				regulator-boot-on;
+-				regulator-min-microvolt = <1800000>;
+-				regulator-max-microvolt = <1800000>;
+-
+-				regulator-state-mem {
+-					regulator-off-in-suspend;
+-				};
+-			};
+-
+-			vcca1v8_pmu: LDO_REG8 {
+-				regulator-name = "vcca1v8_pmu";
+-				regulator-always-on;
+-				regulator-boot-on;
+-				regulator-min-microvolt = <1800000>;
+-				regulator-max-microvolt = <1800000>;
+-
+-				regulator-state-mem {
+-					regulator-on-in-suspend;
+-					regulator-suspend-microvolt = <1800000>;
+-				};
+-			};
+-
+-			vcca1v8_image: LDO_REG9 {
+-				regulator-name = "vcca1v8_image";
+-				regulator-min-microvolt = <1800000>;
+-				regulator-max-microvolt = <1800000>;
+-
+-				regulator-state-mem {
+-					regulator-off-in-suspend;
+-				};
+-			};
+-
+-			vcc_3v3: SWITCH_REG1 {
+-				regulator-name = "vcc_3v3";
+-				regulator-always-on;
+-				regulator-boot-on;
+-
+-				regulator-state-mem {
+-					regulator-off-in-suspend;
+-				};
+-			};
+-
+-			vcc3v3_sd: SWITCH_REG2 {
+-				regulator-name = "vcc3v3_sd";
+-				regulator-always-on;
+-				regulator-boot-on;
+-
+-				regulator-state-mem {
+-					regulator-off-in-suspend;
+-				};
+-			};
+-		};
+-
+-	};
+-};
+-
+-&i2c5 {
+-	status = "okay";
+-
+-	hym8563: rtc@51 {
+-		compatible = "haoyu,hym8563";
+-		reg = <0x51>;
+-		interrupt-parent = <&gpio0>;
+-		interrupts = <RK_PD3 IRQ_TYPE_LEVEL_LOW>;
+-		#clock-cells = <0>;
+-		clock-output-names = "rtcic_32kout";
+-		pinctrl-names = "default";
+-		pinctrl-0 = <&hym8563_int>;
+-		wakeup-source;
+-	};
+-};
+-
+-&i2s0_8ch {
+-	status = "okay";
+-};
+-
+-&i2s1_8ch {
+-	rockchip,trcm-sync-tx-only;
+-	status = "okay";
+-};
+-
+ &mdio0 {
+ 	rgmii_phy0: ethernet-phy@1 {
+ 		compatible = "ethernet-phy-ieee802.3-c22";
+@@ -568,146 +136,5 @@
+ 			rockchip,pins = <2 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
+ 		};
+ 	};
+-
+-	hym8563 {
+-		hym8563_int: hym8563-int {
+-			rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up>;
+-		};
+-	};
+-
+-	pmic {
+-		pmic_int: pmic-int {
+-			rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
+-		};
+-	};
+-
+-	usb {
+-		vcc5v0_usb_host_en: vcc5v0-usb-host-en {
+-			rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
+-		};
+-
+-		vcc5v0_usb_otg_en: vcc5v0-usb-otg-en {
+-			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
+-		};
+-	};
+-};
+-
+-&pmu_io_domains {
+-	pmuio1-supply = <&vcc3v3_pmu>;
+-	pmuio2-supply = <&vcc3v3_pmu>;
+-	vccio1-supply = <&vccio_acodec>;
+-	vccio3-supply = <&vccio_sd>;
+-	vccio4-supply = <&vcc_1v8>;
+-	vccio5-supply = <&vcc_3v3>;
+-	vccio6-supply = <&vcc_1v8>;
+-	vccio7-supply = <&vcc_3v3>;
+-	status = "okay";
+-};
+-
+-&saradc {
+-	vref-supply = <&vcca_1v8>;
+-	status = "okay";
+-};
+-
+-&sdhci {
+-	bus-width = <8>;
+-	max-frequency = <200000000>;
+-	non-removable;
+-	pinctrl-names = "default";
+-	pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd>;
+-	status = "okay";
+-};
+-
+-&sdmmc0 {
+-	max-frequency = <150000000>;
+-	no-sdio;
+-	no-mmc;
+-	bus-width = <4>;
+-	cap-mmc-highspeed;
+-	cap-sd-highspeed;
+-	disable-wp;
+-	vmmc-supply = <&vcc3v3_sd>;
+-	vqmmc-supply = <&vccio_sd>;
+-	pinctrl-names = "default";
+-	pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
+-	status = "okay";
+-};
+-
+-&tsadc {
+-	rockchip,hw-tshut-mode = <1>;
+-	rockchip,hw-tshut-polarity = <0>;
+-	status = "okay";
+-};
+-
+-&uart2 {
+-	status = "okay";
+-};
+-
+-&usb_host0_ehci {
+-	status = "okay";
+-};
+-
+-&usb_host0_ohci {
+-	status = "okay";
+-};
+-
+-&usb_host0_xhci {
+-	extcon = <&usb2phy0>;
+-	dr_mode = "host";
+-	status = "okay";
+-};
+-
+-&usb_host1_ehci {
+-	status = "okay";
+-};
+-
+-&usb_host1_ohci {
+-	status = "okay";
+ };
+ 
+-&usb_host1_xhci {
+-	status = "okay";
+-};
+-
+-&usb2phy0 {
+-	status = "okay";
+-};
+-
+-&usb2phy0_host {
+-	phy-supply = <&vcc5v0_usb_host>;
+-	status = "okay";
+-};
+-
+-&usb2phy0_otg {
+-	status = "okay";
+-};
+-
+-&usb2phy1 {
+-	status = "okay";
+-};
+-
+-&usb2phy1_host {
+-	phy-supply = <&vcc5v0_usb_otg>;
+-	status = "okay";
+-};
+-
+-&usb2phy1_otg {
+-	status = "okay";
+-};
+-
+-&vop {
+-	assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
+-	assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
+-	status = "okay";
+-};
+-
+-&vop_mmu {
+-	status = "okay";
+-};
+-
+-&vp0 {
+-	vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
+-		reg = <ROCKCHIP_VOP2_EP_HDMI0>;
+-		remote-endpoint = <&hdmi_in_vp0>;
+-	};
+-};
+--- /dev/null
++++ b/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dtsi
+@@ -0,0 +1,596 @@
++// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
++/*
++ * Copyright (c) 2022 FriendlyElec Computer Tech. Co., Ltd.
++ * (http://www.friendlyelec.com)
++ *
++ * Copyright (c) 2023 Tianling Shen <[email protected]>
++ */
++
++/dts-v1/;
++#include <dt-bindings/gpio/gpio.h>
++#include <dt-bindings/input/input.h>
++#include <dt-bindings/leds/common.h>
++#include <dt-bindings/pinctrl/rockchip.h>
++#include <dt-bindings/soc/rockchip,vop2.h>
++#include "rk3568.dtsi"
++
++/ {
++	aliases {
++		mmc0 = &sdmmc0;
++		mmc1 = &sdhci;
++	};
++
++	chosen: chosen {
++		stdout-path = "serial2:1500000n8";
++	};
++
++	hdmi-con {
++		compatible = "hdmi-connector";
++		type = "a";
++
++		port {
++			hdmi_con_in: endpoint {
++				remote-endpoint = <&hdmi_out_con>;
++			};
++		};
++	};
++
++	vdd_usbc: vdd-usbc-regulator {
++		compatible = "regulator-fixed";
++		regulator-name = "vdd_usbc";
++		regulator-always-on;
++		regulator-boot-on;
++		regulator-min-microvolt = <5000000>;
++		regulator-max-microvolt = <5000000>;
++	};
++
++	vcc3v3_sys: vcc3v3-sys-regulator {
++		compatible = "regulator-fixed";
++		regulator-name = "vcc3v3_sys";
++		regulator-always-on;
++		regulator-boot-on;
++		regulator-min-microvolt = <3300000>;
++		regulator-max-microvolt = <3300000>;
++		vin-supply = <&vdd_usbc>;
++	};
++
++	vcc5v0_sys: vcc5v0-sys-regulator {
++		compatible = "regulator-fixed";
++		regulator-name = "vcc5v0_sys";
++		regulator-always-on;
++		regulator-boot-on;
++		regulator-min-microvolt = <5000000>;
++		regulator-max-microvolt = <5000000>;
++		vin-supply = <&vdd_usbc>;
++	};
++
++	vcc3v3_pcie: vcc3v3-pcie-regulator {
++		compatible = "regulator-fixed";
++		regulator-name = "vcc3v3_pcie";
++		regulator-min-microvolt = <3300000>;
++		regulator-max-microvolt = <3300000>;
++		enable-active-high;
++		gpios = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>;
++		startup-delay-us = <200000>;
++		vin-supply = <&vcc5v0_sys>;
++	};
++
++	vcc5v0_usb: vcc5v0-usb-regulator {
++		compatible = "regulator-fixed";
++		regulator-name = "vcc5v0_usb";
++		regulator-always-on;
++		regulator-boot-on;
++		regulator-min-microvolt = <5000000>;
++		regulator-max-microvolt = <5000000>;
++		vin-supply = <&vdd_usbc>;
++	};
++
++	vcc5v0_usb_host: vcc5v0-usb-host-regulator {
++		compatible = "regulator-fixed";
++		enable-active-high;
++		gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
++		pinctrl-names = "default";
++		pinctrl-0 = <&vcc5v0_usb_host_en>;
++		regulator-name = "vcc5v0_usb_host";
++		regulator-always-on;
++		regulator-boot-on;
++		regulator-min-microvolt = <5000000>;
++		regulator-max-microvolt = <5000000>;
++		vin-supply = <&vcc5v0_usb>;
++	};
++
++	vcc5v0_usb_otg: vcc5v0-usb-otg-regulator {
++		compatible = "regulator-fixed";
++		enable-active-high;
++		gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
++		pinctrl-names = "default";
++		pinctrl-0 = <&vcc5v0_usb_otg_en>;
++		regulator-name = "vcc5v0_usb_otg";
++		regulator-min-microvolt = <5000000>;
++		regulator-max-microvolt = <5000000>;
++		vin-supply = <&vcc5v0_usb>;
++	};
++
++	pcie30_avdd0v9: pcie30-avdd0v9-regulator {
++		compatible = "regulator-fixed";
++		regulator-name = "pcie30_avdd0v9";
++		regulator-always-on;
++		regulator-boot-on;
++		regulator-min-microvolt = <900000>;
++		regulator-max-microvolt = <900000>;
++		vin-supply = <&vcc3v3_sys>;
++	};
++
++	pcie30_avdd1v8: pcie30-avdd1v8-regulator {
++		compatible = "regulator-fixed";
++		regulator-name = "pcie30_avdd1v8";
++		regulator-always-on;
++		regulator-boot-on;
++		regulator-min-microvolt = <1800000>;
++		regulator-max-microvolt = <1800000>;
++		vin-supply = <&vcc3v3_sys>;
++	};
++};
++
++&combphy0 {
++	status = "okay";
++};
++
++&combphy1 {
++	status = "okay";
++};
++
++&combphy2 {
++	status = "okay";
++};
++
++&cpu0 {
++	cpu-supply = <&vdd_cpu>;
++};
++
++&cpu1 {
++	cpu-supply = <&vdd_cpu>;
++};
++
++&cpu2 {
++	cpu-supply = <&vdd_cpu>;
++};
++
++&cpu3 {
++	cpu-supply = <&vdd_cpu>;
++};
++
++&gpu {
++	mali-supply = <&vdd_gpu>;
++	status = "okay";
++};
++
++&hdmi {
++	avdd-0v9-supply = <&vdda0v9_image>;
++	avdd-1v8-supply = <&vcca1v8_image>;
++	status = "okay";
++};
++
++&hdmi_in {
++	hdmi_in_vp0: endpoint {
++		remote-endpoint = <&vp0_out_hdmi>;
++	};
++};
++
++&hdmi_out {
++	hdmi_out_con: endpoint {
++		remote-endpoint = <&hdmi_con_in>;
++	};
++};
++
++&hdmi_sound {
++	status = "okay";
++};
++
++&i2c0 {
++	status = "okay";
++
++	vdd_cpu: regulator@1c {
++		compatible = "tcs,tcs4525";
++		reg = <0x1c>;
++		fcs,suspend-voltage-selector = <1>;
++		regulator-name = "vdd_cpu";
++		regulator-always-on;
++		regulator-boot-on;
++		regulator-min-microvolt = <800000>;
++		regulator-max-microvolt = <1150000>;
++		regulator-ramp-delay = <2300>;
++		vin-supply = <&vcc5v0_sys>;
++
++		regulator-state-mem {
++			regulator-off-in-suspend;
++		};
++	};
++
++	rk809: pmic@20 {
++		compatible = "rockchip,rk809";
++		reg = <0x20>;
++		interrupt-parent = <&gpio0>;
++		interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
++		#clock-cells = <1>;
++		pinctrl-names = "default";
++		pinctrl-0 = <&pmic_int>;
++		rockchip,system-power-controller;
++		vcc1-supply = <&vcc3v3_sys>;
++		vcc2-supply = <&vcc3v3_sys>;
++		vcc3-supply = <&vcc3v3_sys>;
++		vcc4-supply = <&vcc3v3_sys>;
++		vcc5-supply = <&vcc3v3_sys>;
++		vcc6-supply = <&vcc3v3_sys>;
++		vcc7-supply = <&vcc3v3_sys>;
++		vcc8-supply = <&vcc3v3_sys>;
++		vcc9-supply = <&vcc3v3_sys>;
++		wakeup-source;
++
++		regulators {
++			vdd_logic: DCDC_REG1 {
++				regulator-name = "vdd_logic";
++				regulator-always-on;
++				regulator-boot-on;
++				regulator-init-microvolt = <900000>;
++				regulator-initial-mode = <0x2>;
++				regulator-min-microvolt = <500000>;
++				regulator-max-microvolt = <1350000>;
++				regulator-ramp-delay = <6001>;
++
++				regulator-state-mem {
++					regulator-off-in-suspend;
++				};
++			};
++
++			vdd_gpu: DCDC_REG2 {
++				regulator-name = "vdd_gpu";
++				regulator-always-on;
++				regulator-init-microvolt = <900000>;
++				regulator-initial-mode = <0x2>;
++				regulator-min-microvolt = <500000>;
++				regulator-max-microvolt = <1350000>;
++				regulator-ramp-delay = <6001>;
++
++				regulator-state-mem {
++					regulator-off-in-suspend;
++				};
++			};
++
++			vcc_ddr: DCDC_REG3 {
++				regulator-name = "vcc_ddr";
++				regulator-always-on;
++				regulator-boot-on;
++				regulator-initial-mode = <0x2>;
++
++				regulator-state-mem {
++					regulator-on-in-suspend;
++				};
++			};
++
++			vdd_npu: DCDC_REG4 {
++				regulator-name = "vdd_npu";
++				regulator-init-microvolt = <900000>;
++				regulator-initial-mode = <0x2>;
++				regulator-min-microvolt = <500000>;
++				regulator-max-microvolt = <1350000>;
++				regulator-ramp-delay = <6001>;
++
++				regulator-state-mem {
++					regulator-off-in-suspend;
++				};
++			};
++
++			vcc_1v8: DCDC_REG5 {
++				regulator-name = "vcc_1v8";
++				regulator-always-on;
++				regulator-boot-on;
++				regulator-min-microvolt = <1800000>;
++				regulator-max-microvolt = <1800000>;
++
++				regulator-state-mem {
++					regulator-off-in-suspend;
++				};
++			};
++
++			vdda0v9_image: LDO_REG1 {
++				regulator-name = "vdda0v9_image";
++				regulator-min-microvolt = <950000>;
++				regulator-max-microvolt = <950000>;
++
++				regulator-state-mem {
++					regulator-off-in-suspend;
++				};
++			};
++
++			vdda_0v9: LDO_REG2 {
++				regulator-name = "vdda_0v9";
++				regulator-always-on;
++				regulator-boot-on;
++				regulator-min-microvolt = <900000>;
++				regulator-max-microvolt = <900000>;
++
++				regulator-state-mem {
++					regulator-off-in-suspend;
++				};
++			};
++
++			vdda0v9_pmu: LDO_REG3 {
++				regulator-name = "vdda0v9_pmu";
++				regulator-always-on;
++				regulator-boot-on;
++				regulator-min-microvolt = <900000>;
++				regulator-max-microvolt = <900000>;
++
++				regulator-state-mem {
++					regulator-on-in-suspend;
++					regulator-suspend-microvolt = <900000>;
++				};
++			};
++
++			vccio_acodec: LDO_REG4 {
++				regulator-name = "vccio_acodec";
++				regulator-always-on;
++				regulator-min-microvolt = <3300000>;
++				regulator-max-microvolt = <3300000>;
++
++				regulator-state-mem {
++					regulator-off-in-suspend;
++				};
++			};
++
++			vccio_sd: LDO_REG5 {
++				regulator-name = "vccio_sd";
++				regulator-min-microvolt = <1800000>;
++				regulator-max-microvolt = <3300000>;
++
++				regulator-state-mem {
++					regulator-off-in-suspend;
++				};
++			};
++
++			vcc3v3_pmu: LDO_REG6 {
++				regulator-name = "vcc3v3_pmu";
++				regulator-always-on;
++				regulator-boot-on;
++				regulator-min-microvolt = <3300000>;
++				regulator-max-microvolt = <3300000>;
++
++				regulator-state-mem {
++					regulator-on-in-suspend;
++					regulator-suspend-microvolt = <3300000>;
++				};
++			};
++
++			vcca_1v8: LDO_REG7 {
++				regulator-name = "vcca_1v8";
++				regulator-always-on;
++				regulator-boot-on;
++				regulator-min-microvolt = <1800000>;
++				regulator-max-microvolt = <1800000>;
++
++				regulator-state-mem {
++					regulator-off-in-suspend;
++				};
++			};
++
++			vcca1v8_pmu: LDO_REG8 {
++				regulator-name = "vcca1v8_pmu";
++				regulator-always-on;
++				regulator-boot-on;
++				regulator-min-microvolt = <1800000>;
++				regulator-max-microvolt = <1800000>;
++
++				regulator-state-mem {
++					regulator-on-in-suspend;
++					regulator-suspend-microvolt = <1800000>;
++				};
++			};
++
++			vcca1v8_image: LDO_REG9 {
++				regulator-name = "vcca1v8_image";
++				regulator-min-microvolt = <1800000>;
++				regulator-max-microvolt = <1800000>;
++
++				regulator-state-mem {
++					regulator-off-in-suspend;
++				};
++			};
++
++			vcc_3v3: SWITCH_REG1 {
++				regulator-name = "vcc_3v3";
++				regulator-always-on;
++				regulator-boot-on;
++
++				regulator-state-mem {
++					regulator-off-in-suspend;
++				};
++			};
++
++			vcc3v3_sd: SWITCH_REG2 {
++				regulator-name = "vcc3v3_sd";
++				regulator-always-on;
++				regulator-boot-on;
++
++				regulator-state-mem {
++					regulator-off-in-suspend;
++				};
++			};
++		};
++
++	};
++};
++
++&i2c5 {
++	status = "okay";
++
++	hym8563: rtc@51 {
++		compatible = "haoyu,hym8563";
++		reg = <0x51>;
++		interrupt-parent = <&gpio0>;
++		interrupts = <RK_PD3 IRQ_TYPE_LEVEL_LOW>;
++		#clock-cells = <0>;
++		clock-output-names = "rtcic_32kout";
++		pinctrl-names = "default";
++		pinctrl-0 = <&hym8563_int>;
++		wakeup-source;
++	};
++};
++
++&i2s0_8ch {
++	status = "okay";
++};
++
++&i2s1_8ch {
++	rockchip,trcm-sync-tx-only;
++	status = "okay";
++};
++
++&pcie30phy {
++	data-lanes = <1 2>;
++	status = "okay";
++};
++
++&pinctrl {
++	hym8563 {
++		hym8563_int: hym8563-int {
++			rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up>;
++		};
++	};
++
++	pmic {
++		pmic_int: pmic-int {
++			rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
++		};
++	};
++
++	usb {
++		vcc5v0_usb_host_en: vcc5v0-usb-host-en {
++			rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
++		};
++
++		vcc5v0_usb_otg_en: vcc5v0-usb-otg-en {
++			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
++		};
++	};
++};
++
++&pmu_io_domains {
++	pmuio1-supply = <&vcc3v3_pmu>;
++	pmuio2-supply = <&vcc3v3_pmu>;
++	vccio1-supply = <&vccio_acodec>;
++	vccio3-supply = <&vccio_sd>;
++	vccio4-supply = <&vcc_1v8>;
++	vccio5-supply = <&vcc_3v3>;
++	vccio6-supply = <&vcc_1v8>;
++	vccio7-supply = <&vcc_3v3>;
++	status = "okay";
++};
++
++&saradc {
++	vref-supply = <&vcca_1v8>;
++	status = "okay";
++};
++
++&sdhci {
++	bus-width = <8>;
++	max-frequency = <200000000>;
++	non-removable;
++	pinctrl-names = "default";
++	pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd>;
++	status = "okay";
++};
++
++&sdmmc0 {
++	max-frequency = <150000000>;
++	no-sdio;
++	no-mmc;
++	bus-width = <4>;
++	cap-mmc-highspeed;
++	cap-sd-highspeed;
++	disable-wp;
++	vmmc-supply = <&vcc3v3_sd>;
++	vqmmc-supply = <&vccio_sd>;
++	pinctrl-names = "default";
++	pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
++	status = "okay";
++};
++
++&tsadc {
++	rockchip,hw-tshut-mode = <1>;
++	rockchip,hw-tshut-polarity = <0>;
++	status = "okay";
++};
++
++&uart2 {
++	status = "okay";
++};
++
++&usb_host0_ehci {
++	status = "okay";
++};
++
++&usb_host0_ohci {
++	status = "okay";
++};
++
++&usb_host0_xhci {
++	extcon = <&usb2phy0>;
++	dr_mode = "host";
++	status = "okay";
++};
++
++&usb_host1_ehci {
++	status = "okay";
++};
++
++&usb_host1_ohci {
++	status = "okay";
++};
++
++&usb_host1_xhci {
++	status = "okay";
++};
++
++&usb2phy0 {
++	status = "okay";
++};
++
++&usb2phy0_host {
++	phy-supply = <&vcc5v0_usb_host>;
++	status = "okay";
++};
++
++&usb2phy0_otg {
++	status = "okay";
++};
++
++&usb2phy1 {
++	status = "okay";
++};
++
++&usb2phy1_host {
++	phy-supply = <&vcc5v0_usb_otg>;
++	status = "okay";
++};
++
++&usb2phy1_otg {
++	status = "okay";
++};
++
++&vop {
++	assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
++	assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
++	status = "okay";
++};
++
++&vop_mmu {
++	status = "okay";
++};
++
++&vp0 {
++	vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
++		reg = <ROCKCHIP_VOP2_EP_HDMI0>;
++		remote-endpoint = <&hdmi_in_vp0>;
++	};
++};

target/linux/rockchip/patches-6.1/011-v6.4-arm64-dts-rockchip-fix-gmac-support-for-NanoPi-R5S.patch

@@ -0,0 +1,49 @@
+From 31425b1fadb2040b359e52ffc24c049a78d56c96 Mon Sep 17 00:00:00 2001
+From: Tianling Shen <[email protected]>
+Date: Sat, 18 Mar 2023 16:37:44 +0800
+Subject: [PATCH] arm64: dts: rockchip: fix gmac support for NanoPi R5S
+
+- Changed phy-mode to rgmii.
+
+- Fixed pull type in pinctrl for gmac0.
+
+- Removed duplicate properties in mdio node.
+  These properties are defined in the gmac0 node already.
+
+Signed-off-by: Tianling Shen <[email protected]>
+Link: https://lore.kernel.org/r/[email protected]
+Signed-off-by: Heiko Stuebner <[email protected]>
+---
+ arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts | 7 ++-----
+ 1 file changed, 2 insertions(+), 5 deletions(-)
+
+--- a/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts
++++ b/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts
+@@ -57,7 +57,7 @@
+ 	assigned-clock-rates = <0>, <125000000>;
+ 	clock_in_out = "output";
+ 	phy-handle = <&rgmii_phy0>;
+-	phy-mode = "rgmii-id";
++	phy-mode = "rgmii";
+ 	pinctrl-names = "default";
+ 	pinctrl-0 = <&gmac0_miim
+ 		     &gmac0_tx_bus2
+@@ -79,9 +79,6 @@
+ 		reg = <1>;
+ 		pinctrl-0 = <&eth_phy0_reset_pin>;
+ 		pinctrl-names = "default";
+-		reset-assert-us = <10000>;
+-		reset-deassert-us = <50000>;
+-		reset-gpios = <&gpio0 RK_PC4 GPIO_ACTIVE_LOW>;
+ 	};
+ };
+ 
+@@ -115,7 +112,7 @@
+ &pinctrl {
+ 	gmac0 {
+ 		eth_phy0_reset_pin: eth-phy0-reset-pin {
+-			rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_down>;
++			rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_up>;
+ 		};
+ 	};
+ 

target/linux/rockchip/patches-6.1/012-v6.4-arm64-dts-rockchip-remove-I2S1-TDM-node-for-the-NanoPi-R5.patch

@@ -0,0 +1,39 @@
+From 975e9bbad11950fc8276f1fa260d8bf2c341aa41 Mon Sep 17 00:00:00 2001
+From: Tianling Shen <[email protected]>
+Date: Sat, 18 Mar 2023 16:37:45 +0800
+Subject: [PATCH] arm64: dts: rockchip: remove I2S1 TDM node for the NanoPi R5
+ series
+
+This is for the audio output which does not exist on the boards.
+Also disable regulator-always-on for vccio_acodec since it's only
+used by the audio output.
+
+Signed-off-by: Tianling Shen <[email protected]>
+Link: https://lore.kernel.org/r/[email protected]
+Signed-off-by: Heiko Stuebner <[email protected]>
+---
+ arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dtsi | 6 ------
+ 1 file changed, 6 deletions(-)
+
+--- a/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dtsi
++++ b/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dtsi
+@@ -330,7 +330,6 @@
+ 
+ 			vccio_acodec: LDO_REG4 {
+ 				regulator-name = "vccio_acodec";
+-				regulator-always-on;
+ 				regulator-min-microvolt = <3300000>;
+ 				regulator-max-microvolt = <3300000>;
+ 
+@@ -441,11 +440,6 @@
+ 	status = "okay";
+ };
+ 
+-&i2s1_8ch {
+-	rockchip,trcm-sync-tx-only;
+-	status = "okay";
+-};
+-
+ &pcie30phy {
+ 	data-lanes = <1 2>;
+ 	status = "okay";

target/linux/rockchip/patches-6.1/013-v6.4-arm64-dts-rockchip-Add-FriendlyARM-NanoPi-R5C.patch

@@ -0,0 +1,152 @@
+From 05620031408ac6cfc6d5c048431827e49aa0ade1 Mon Sep 17 00:00:00 2001
+From: Tianling Shen <[email protected]>
+Date: Sat, 18 Mar 2023 16:37:43 +0800
+Subject: [PATCH] arm64: dts: rockchip: Add FriendlyARM NanoPi R5C
+
+FriendlyARM NanoPi R5C is an open-sourced mini IoT gateway device.
+
+Specification:
+- Rockchip RK3568
+- 1/4GB LPDDR4X RAM
+- 8/32GB eMMC
+- SD card slot
+- M.2 Connector
+- 2x USB 3.0 Port
+- 2x 2500 Base-T (PCIe, r8125)
+- HDMI 2.0
+- MIPI DSI/CSI
+- USB Type C 5V
+
+Signed-off-by: Tianling Shen <[email protected]>
+Link: https://lore.kernel.org/r/[email protected]
+Signed-off-by: Heiko Stuebner <[email protected]>
+---
+ arch/arm64/boot/dts/rockchip/Makefile         |   1 +
+ .../boot/dts/rockchip/rk3568-nanopi-r5c.dts   | 112 ++++++++++++++++++
+ 2 files changed, 113 insertions(+)
+ create mode 100644 arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5c.dts
+
+--- a/arch/arm64/boot/dts/rockchip/Makefile
++++ b/arch/arm64/boot/dts/rockchip/Makefile
+@@ -74,5 +74,6 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-ro
+ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-soquartz-cm4.dtb
+ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-bpi-r2-pro.dtb
+ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-evb1-v10.dtb
++dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-nanopi-r5c.dtb
+ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-nanopi-r5s.dtb
+ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-rock-3a.dtb
+--- /dev/null
++++ b/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5c.dts
+@@ -0,0 +1,112 @@
++// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
++/*
++ * Copyright (c) 2022 FriendlyElec Computer Tech. Co., Ltd.
++ * (http://www.friendlyelec.com)
++ *
++ * Copyright (c) 2023 Tianling Shen <[email protected]>
++ */
++
++/dts-v1/;
++#include "rk3568-nanopi-r5s.dtsi"
++
++/ {
++	model = "FriendlyElec NanoPi R5C";
++	compatible = "friendlyarm,nanopi-r5c", "rockchip,rk3568";
++
++	gpio-keys {
++		compatible = "gpio-keys";
++		pinctrl-names = "default";
++		pinctrl-0 = <&reset_button_pin>;
++
++		button-reset {
++			debounce-interval = <50>;
++			gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_LOW>;
++			label = "reset";
++			linux,code = <KEY_RESTART>;
++		};
++	};
++
++	gpio-leds {
++		compatible = "gpio-leds";
++		pinctrl-names = "default";
++		pinctrl-0 = <&lan_led_pin>, <&power_led_pin>, <&wan_led_pin>, <&wlan_led_pin>;
++
++		led-lan {
++			color = <LED_COLOR_ID_GREEN>;
++			function = LED_FUNCTION_LAN;
++			gpios = <&gpio3 RK_PA3 GPIO_ACTIVE_HIGH>;
++		};
++
++		power_led: led-power {
++			color = <LED_COLOR_ID_RED>;
++			function = LED_FUNCTION_POWER;
++			linux,default-trigger = "heartbeat";
++			gpios = <&gpio3 RK_PA2 GPIO_ACTIVE_HIGH>;
++		};
++
++		led-wan {
++			color = <LED_COLOR_ID_GREEN>;
++			function = LED_FUNCTION_WAN;
++			gpios = <&gpio3 RK_PA4 GPIO_ACTIVE_HIGH>;
++		};
++
++		led-wlan {
++			color = <LED_COLOR_ID_GREEN>;
++			function = LED_FUNCTION_WLAN;
++			gpios = <&gpio3 RK_PA5 GPIO_ACTIVE_HIGH>;
++		};
++	};
++};
++
++&pcie2x1 {
++	pinctrl-names = "default";
++	pinctrl-0 = <&pcie20_reset_pin>;
++	reset-gpios = <&gpio3 RK_PC1 GPIO_ACTIVE_HIGH>;
++	status = "okay";
++};
++
++&pcie3x1 {
++	num-lanes = <1>;
++	reset-gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>;
++	vpcie3v3-supply = <&vcc3v3_pcie>;
++	status = "okay";
++};
++
++&pcie3x2 {
++	num-lanes = <1>;
++	reset-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>;
++	vpcie3v3-supply = <&vcc3v3_pcie>;
++	status = "okay";
++};
++
++&pinctrl {
++	gpio-leds {
++		lan_led_pin: lan-led-pin {
++			rockchip,pins = <3 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
++		};
++
++		power_led_pin: power-led-pin {
++			rockchip,pins = <3 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
++		};
++
++		wan_led_pin: wan-led-pin {
++			rockchip,pins = <3 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
++		};
++
++		wlan_led_pin: wlan-led-pin {
++			rockchip,pins = <3 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
++		};
++	};
++
++	pcie {
++		pcie20_reset_pin: pcie20-reset-pin {
++			rockchip,pins = <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_up>;
++		};
++	};
++
++	rockchip-key {
++		reset_button_pin: reset-button-pin {
++			rockchip,pins = <4 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>;
++		};
++	};
++};

target/linux/rockchip/patches-6.1/014-v6.4-arm64-dts-rockchip-fix-button-reset-pin-for-nanopi-r5c.patch

@@ -0,0 +1,37 @@
+From 5325593377f07de31f7e473a9677a28a04c891f3 Mon Sep 17 00:00:00 2001
+From: Tianling Shen <[email protected]>
+Date: Thu, 11 May 2023 00:18:50 +0800
+Subject: [PATCH] arm64: dts: rockchip: fix button reset pin for nanopi r5c
+
+The reset pin was wrongly assigned due to a copy/paste error,
+fix it to match actual gpio pin.
+
+While at it, remove a blank line from nanopi r5s dts.
+
+Fixes: 05620031408a ("arm64: dts: rockchip: Add FriendlyARM NanoPi R5C")
+Signed-off-by: Tianling Shen <[email protected]>
+Link: https://lore.kernel.org/r/[email protected]
+Signed-off-by: Heiko Stuebner <[email protected]>
+---
+ arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5c.dts | 2 +-
+ arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts | 1 -
+ 2 files changed, 1 insertion(+), 2 deletions(-)
+
+--- a/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5c.dts
++++ b/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5c.dts
+@@ -106,7 +106,7 @@
+ 
+ 	rockchip-key {
+ 		reset_button_pin: reset-button-pin {
+-			rockchip,pins = <4 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>;
++			rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_up>;
+ 		};
+ 	};
+ };
+--- a/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts
++++ b/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts
+@@ -134,4 +134,3 @@
+ 		};
+ 	};
+ };
+-

target/linux/rockchip/patches-6.1/015-v6.8-arm64-dts-rockchip-configure-eth-pad-driver-strength-for-.patch

@@ -0,0 +1,33 @@
+From fc5a80a432607d05e85bba37971712405f75c546 Mon Sep 17 00:00:00 2001
+From: Tianling Shen <[email protected]>
+Date: Sat, 16 Dec 2023 12:07:23 +0800
+Subject: [PATCH] arm64: dts: rockchip: configure eth pad driver strength
+ for orangepi r1 plus lts
+
+The default strength is not enough to provide stable connection
+under 3.3v LDO voltage.
+
+Fixes: 387b3bbac5ea ("arm64: dts: rockchip: Add Xunlong OrangePi R1 Plus LTS")
+Cc: [email protected] # 6.6+
+Signed-off-by: Tianling Shen <[email protected]>
+Link: https://lore.kernel.org/r/[email protected]
+Signed-off-by: Heiko Stuebner <[email protected]>
+---
+ arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus-lts.dts | 4 +++-
+ 1 file changed, 3 insertions(+), 1 deletion(-)
+
+--- a/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus-lts.dts
++++ b/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus-lts.dts
+@@ -26,9 +26,11 @@
+ 			compatible = "ethernet-phy-ieee802.3-c22";
+ 			reg = <0>;
+ 
++			motorcomm,auto-sleep-disabled;
+ 			motorcomm,clk-out-frequency-hz = <125000000>;
+ 			motorcomm,keep-pll-enabled;
+-			motorcomm,auto-sleep-disabled;
++			motorcomm,rx-clk-drv-microamp = <5020>;
++			motorcomm,rx-data-drv-microamp = <5020>;
+ 
+ 			pinctrl-0 = <&eth_phy_reset_pin>;
+ 			pinctrl-names = "default";

target/linux/rockchip/patches-6.1/016-v6.3-arm64-dts-rockchip-Add-Radxa-Compute-Module-3-IO-board.patch

@@ -0,0 +1,233 @@
+From 096ebfb74b19f2d4bdcbc33ae02e857ff4b3e0a0 Mon Sep 17 00:00:00 2001
+From: Jagan Teki <[email protected]>
+Date: Thu, 12 Jan 2023 16:29:02 +0530
+Subject: [PATCH] arm64: dts: rockchip: Add Radxa Compute Module 3 IO board
+
+Radxa Compute Module 3(CM3) IO board is an application board from Radxa
+and is compatible with Raspberry Pi CM4 IO form factor.
+
+Specification:
+- 1x HDMI,
+- 2x MIPI DSI
+- 2x MIPI CSI2
+- 1x eDP
+- 1x PCIe card
+- 2x SATA
+- 2x USB 2.0 Host
+- 1x USB 3.0
+- 1x USB 2.0 OTG
+- Phone jack
+- microSD slot
+- 40-pin GPIO expansion header
+- 12V DC
+
+Radxa CM3 needs to mount on top of this IO board in order to create
+complete Radxa CM3 IO board platform.
+
+Add support for Radxa CM3 IO Board.
+
+Co-developed-by: FUKAUMI Naoki <[email protected]>
+Signed-off-by: FUKAUMI Naoki <[email protected]>
+Co-developed-by: Manoj Sai <[email protected]>
+Signed-off-by: Manoj Sai <[email protected]>
+Signed-off-by: Jagan Teki <[email protected]>
+Link: https://lore.kernel.org/r/[email protected]
+Signed-off-by: Heiko Stuebner <[email protected]>
+---
+ arch/arm64/boot/dts/rockchip/Makefile         |   1 +
+ .../boot/dts/rockchip/rk3566-radxa-cm3-io.dts | 179 ++++++++++++++++++
+ 2 files changed, 180 insertions(+)
+ create mode 100644 arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3-io.dts
+
+--- a/arch/arm64/boot/dts/rockchip/Makefile
++++ b/arch/arm64/boot/dts/rockchip/Makefile
+@@ -70,6 +70,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-pi
+ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-pinenote-v1.2.dtb
+ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-quartz64-a.dtb
+ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-quartz64-b.dtb
++dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-radxa-cm3-io.dtb
+ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-roc-pc.dtb
+ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-soquartz-cm4.dtb
+ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-bpi-r2-pro.dtb
+--- /dev/null
++++ b/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3-io.dts
+@@ -0,0 +1,179 @@
++// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
++/*
++ * Copyright (c) 2022 Radxa Limited
++ * Copyright (c) 2022 Amarula Solutions(India)
++ */
++
++/dts-v1/;
++#include <dt-bindings/soc/rockchip,vop2.h>
++#include "rk3566.dtsi"
++#include "rk3566-radxa-cm3.dtsi"
++
++/ {
++	model = "Radxa Compute Module 3(CM3) IO Board";
++	compatible = "radxa,radxa-cm3-io", "radxa,radxa-cm3", "rockchip,rk3566";
++
++	aliases {
++		mmc1 = &sdmmc0;
++	};
++
++	chosen: chosen {
++		stdout-path = "serial2:1500000n8";
++	};
++
++	hdmi-con {
++		compatible = "hdmi-connector";
++		type = "a";
++
++		port {
++			hdmi_con_in: endpoint {
++				remote-endpoint = <&hdmi_out_con>;
++			};
++		};
++	};
++
++	leds {
++		compatible = "gpio-leds";
++
++		led-1 {
++			gpios = <&gpio4 RK_PA4 GPIO_ACTIVE_LOW>;
++			color = <LED_COLOR_ID_GREEN>;
++			function = LED_FUNCTION_ACTIVITY;
++			linux,default-trigger = "heartbeat";
++			pinctrl-names = "default";
++			pinctrl-0 = <&pi_nled_activity>;
++		};
++	};
++
++	vcc5v0_usb30: vcc5v0-usb30-regulator {
++		compatible = "regulator-fixed";
++		regulator-name = "vcc5v0_usb30";
++		enable-active-high;
++		gpio = <&gpio3 RK_PC2 GPIO_ACTIVE_HIGH>;
++		pinctrl-names = "default";
++		pinctrl-0 = <&vcc5v0_usb30_en_h>;
++		regulator-always-on;
++		regulator-min-microvolt = <5000000>;
++		regulator-max-microvolt = <5000000>;
++		vin-supply = <&vcc_sys>;
++	};
++
++	vcca1v8_image: vcca1v8-image-regulator {
++		compatible = "regulator-fixed";
++		regulator-name = "vcca1v8_image";
++		regulator-always-on;
++		regulator-boot-on;
++		regulator-min-microvolt = <1800000>;
++		regulator-max-microvolt = <1800000>;
++		vin-supply = <&vcc_1v8_p>;
++	};
++
++	vdda0v9_image: vdda0v9-image-regulator {
++		compatible = "regulator-fixed";
++		regulator-name = "vcca0v9_image";
++		regulator-always-on;
++		regulator-boot-on;
++		regulator-min-microvolt = <900000>;
++		regulator-max-microvolt = <900000>;
++		vin-supply = <&vdda_0v9>;
++	};
++};
++
++&combphy1 {
++	status = "okay";
++};
++
++&hdmi {
++	avdd-0v9-supply = <&vdda0v9_image>;
++	avdd-1v8-supply = <&vcca1v8_image>;
++	status = "okay";
++};
++
++&hdmi_in {
++	hdmi_in_vp0: endpoint {
++		remote-endpoint = <&vp0_out_hdmi>;
++	};
++};
++
++&hdmi_out {
++	hdmi_out_con: endpoint {
++		remote-endpoint = <&hdmi_con_in>;
++	};
++};
++
++&hdmi_sound {
++	status = "okay";
++};
++
++&pinctrl {
++	leds {
++		pi_nled_activity: pi-nled-activity {
++			rockchip,pins = <4 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
++		};
++	};
++
++	sdcard {
++		sdmmc_pwren: sdmmc-pwren {
++			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
++		};
++	};
++
++	usb {
++		vcc5v0_usb30_en_h: vcc5v0-host-en-h {
++			rockchip,pins = <3 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
++		};
++	};
++};
++
++&sdmmc0 {
++	bus-width = <4>;
++	cap-mmc-highspeed;
++	cap-sd-highspeed;
++	disable-wp;
++	vqmmc-supply = <&vccio_sd>;
++	pinctrl-names = "default";
++	pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det &sdmmc0_pwren>;
++	status = "okay";
++};
++
++&uart2 {
++	status = "okay";
++};
++
++&usb2phy0_host {
++	phy-supply = <&vcc5v0_usb30>;
++	status = "okay";
++};
++
++&usb2phy1_host {
++	status = "okay";
++};
++
++&usb2phy1_otg {
++	status = "okay";
++};
++
++&usb_host0_ehci {
++	status = "okay";
++};
++
++&usb_host1_xhci {
++	status = "okay";
++};
++
++&vop {
++	assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
++	assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
++	status = "okay";
++};
++
++&vop_mmu {
++	status = "okay";
++};
++
++&vp0 {
++	vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
++		reg = <ROCKCHIP_VOP2_EP_HDMI0>;
++		remote-endpoint = <&hdmi_in_vp0>;
++	};
++};

target/linux/rockchip/patches-6.1/016-v6.5-arm64-dts-rockchip-Add-FriendlyARM-NanoPi-R2C-Plus.patch

@@ -0,0 +1,63 @@
+From d211665c5a833873ee37e501af58adbf028e6b5f Mon Sep 17 00:00:00 2001
+From: Tianling Shen <[email protected]>
+Date: Sat, 13 May 2023 21:53:07 +0800
+Subject: [PATCH] arm64: dts: rockchip: Add FriendlyARM NanoPi R2C Plus
+
+The NanoPi R2C Plus is a small variant of NanoPi R2C with a on-board
+eMMC flash (8G) included.
+
+Signed-off-by: Tianling Shen <[email protected]>
+Link: https://lore.kernel.org/r/[email protected]
+Signed-off-by: Heiko Stuebner <[email protected]>
+---
+ arch/arm64/boot/dts/rockchip/Makefile              |  1 +
+ .../boot/dts/rockchip/rk3328-nanopi-r2c-plus.dts   | 33 ++++++++++++++++++++++
+ 2 files changed, 34 insertions(+)
+ create mode 100644 arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2c-plus.dts
+
+--- a/arch/arm64/boot/dts/rockchip/Makefile
++++ b/arch/arm64/boot/dts/rockchip/Makefile
+@@ -11,6 +11,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3326-od
+ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-a1.dtb
+ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-evb.dtb
+ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-nanopi-r2c.dtb
++dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-nanopi-r2c-plus.dtb
+ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-nanopi-r2s.dtb
+ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-orangepi-r1-plus.dtb
+ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-orangepi-r1-plus-lts.dtb
+--- /dev/null
++++ b/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2c-plus.dts
+@@ -0,0 +1,33 @@
++// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
++/*
++ * Copyright (c) 2021 FriendlyElec Computer Tech. Co., Ltd.
++ * (http://www.friendlyarm.com)
++ *
++ * Copyright (c) 2023 Tianling Shen <[email protected]>
++ */
++
++/dts-v1/;
++#include "rk3328-nanopi-r2c.dts"
++
++/ {
++	model = "FriendlyElec NanoPi R2C Plus";
++	compatible = "friendlyarm,nanopi-r2c-plus", "rockchip,rk3328";
++
++	aliases {
++		mmc1 = &emmc;
++	};
++};
++
++&emmc {
++	bus-width = <8>;
++	cap-mmc-highspeed;
++	max-frequency = <150000000>;
++	mmc-ddr-1_8v;
++	mmc-hs200-1_8v;
++	non-removable;
++	pinctrl-names = "default";
++	pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
++	vmmc-supply = <&vcc_io_33>;
++	vqmmc-supply = <&vcc18_emmc>;
++	status = "okay";
++};

target/linux/rockchip/patches-6.1/017-v6.3-arm64-dts-rockchip-Enable-Ethernet-for-Radxa-CM3-IO.patch

@@ -0,0 +1,131 @@
+From cc52bfc04726a574fc4440bbbe0c710890e7040a Mon Sep 17 00:00:00 2001
+From: Manoj Sai <[email protected]>
+Date: Wed, 25 Jan 2023 21:40:22 +0530
+Subject: [PATCH] arm64: dts: rockchip: Enable Ethernet for Radxa CM3 IO
+
+Add ethernet nodes for enabling gmac1 on the Radxa CM3 IO board.
+
+Signed-off-by: Manoj Sai <[email protected]>
+Link: https://lore.kernel.org/r/[email protected]
+Signed-off-by: Heiko Stuebner <[email protected]>
+---
+ .../boot/dts/rockchip/rk3566-radxa-cm3-io.dts | 93 +++++++++++++++++++
+ 1 file changed, 93 insertions(+)
+
+--- a/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3-io.dts
++++ b/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3-io.dts
+@@ -21,6 +21,13 @@
+ 		stdout-path = "serial2:1500000n8";
+ 	};
+ 
++	gmac1_clkin: external-gmac1-clock {
++		compatible = "fixed-clock";
++		clock-frequency = <125000000>;
++		clock-output-names = "gmac1_clkin";
++		#clock-cells = <0>;
++	};
++
+ 	hdmi-con {
+ 		compatible = "hdmi-connector";
+ 		type = "a";
+@@ -83,6 +90,29 @@
+ 	status = "okay";
+ };
+ 
++&gmac1 {
++	assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>;
++	assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&gmac1_clkin>;
++	assigned-clock-rates = <0>, <125000000>;
++	clock_in_out = "input";
++	phy-handle = <&rgmii_phy1>;
++	phy-mode = "rgmii";
++	pinctrl-names = "default";
++	pinctrl-0 = <&gmac1m0_miim
++		     &gmac1m0_tx_bus2
++		     &gmac1m0_rx_bus2
++		     &gmac1m0_rgmii_clk
++		     &gmac1m0_rgmii_bus
++		     &gmac1m0_clkinout>;
++	snps,reset-gpio = <&gpio4 RK_PC2 GPIO_ACTIVE_LOW>;
++	snps,reset-active-low;
++	/* Reset time is 20ms, 100ms for rtl8211f */
++	snps,reset-delays-us = <0 20000 100000>;
++	tx_delay = <0x46>;
++	rx_delay = <0x2e>;
++	status = "okay";
++};
++
+ &hdmi {
+ 	avdd-0v9-supply = <&vdda0v9_image>;
+ 	avdd-1v8-supply = <&vcca1v8_image>;
+@@ -105,7 +135,70 @@
+ 	status = "okay";
+ };
+ 
++&mdio1 {
++	rgmii_phy1: ethernet-phy@0 {
++		compatible="ethernet-phy-ieee802.3-c22";
++		reg= <0x0>;
++	};
++};
++
+ &pinctrl {
++	gmac1 {
++		gmac1m0_miim: gmac1m0-miim {
++			rockchip,pins =
++				/* gmac1_mdcm0 */
++				<3 RK_PC4 3 &pcfg_pull_none_drv_level_15>,
++				/* gmac1_mdiom0 */
++				<3 RK_PC5 3 &pcfg_pull_none_drv_level_15>;
++		};
++
++		gmac1m0_rx_bus2: gmac1m0-rx-bus2 {
++			rockchip,pins =
++				/* gmac1_rxd0m0 */
++				<3 RK_PB1 3 &pcfg_pull_none_drv_level_15>,
++				/* gmac1_rxd1m0 */
++				<3 RK_PB2 3 &pcfg_pull_none_drv_level_15>,
++				/* gmac1_rxdvcrsm0 */
++				<3 RK_PB3 3 &pcfg_pull_none_drv_level_15>;
++		};
++
++		gmac1m0_tx_bus2: gmac1m0-tx-bus2 {
++			rockchip,pins =
++				/* gmac1_txd0m0 */
++				<3 RK_PB5 3 &pcfg_pull_none_drv_level_15>,
++				/* gmac1_txd1m0 */
++				<3 RK_PB6 3 &pcfg_pull_none_drv_level_15>,
++				/* gmac1_txenm0 */
++				<3 RK_PB7 3 &pcfg_pull_none_drv_level_15>;
++		};
++
++		gmac1m0_rgmii_clk: gmac1m0-rgmii-clk {
++			rockchip,pins =
++				/* gmac1_rxclkm0 */
++				<3 RK_PA7 3 &pcfg_pull_none_drv_level_15>,
++				/* gmac1_txclkm0 */
++				<3 RK_PA6 3 &pcfg_pull_none_drv_level_15>;
++		};
++
++		gmac1m0_rgmii_bus: gmac1m0-rgmii-bus {
++			rockchip,pins =
++				/* gmac1_rxd2m0 */
++				<3 RK_PA4 3 &pcfg_pull_none_drv_level_15>,
++				/* gmac1_rxd3m0 */
++				<3 RK_PA5 3 &pcfg_pull_none_drv_level_15>,
++				/* gmac1_txd2m0 */
++				<3 RK_PA2 3 &pcfg_pull_none_drv_level_15>,
++				/* gmac1_txd3m0 */
++				<3 RK_PA3 3 &pcfg_pull_none_drv_level_15>;
++		};
++
++		gmac1m0_clkinout: gmac1m0-clkinout {
++			rockchip,pins =
++				/* gmac1_mclkinoutm0 */
++				<3 RK_PC0 3 &pcfg_pull_none_drv_level_15>;
++		};
++	};
++
+ 	leds {
+ 		pi_nled_activity: pi-nled-activity {
+ 			rockchip,pins = <4 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;

target/linux/rockchip/patches-6.1/018-v6.3-arm64-dts-rockchip-Add-rk3566-based-Radxa-Compute-Module-3.patch

@@ -0,0 +1,386 @@
+From 7469ab529bcad50490f6ff651c3e4f03bfa88fe0 Mon Sep 17 00:00:00 2001
+From: Jagan Teki <[email protected]>
+Date: Thu, 12 Jan 2023 16:29:01 +0530
+Subject: [PATCH] arm64: dts: rockchip: Add rk3566 based Radxa Compute Module 3
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Radxa Compute Module 3(CM3) is one of the modules from a series
+System On Module based on the Radxa ROCK 3 series and is compatible
+with Raspberry Pi CM4 pinout and form factor.
+
+Specification:
+- Rockchip RK3566
+- up to 8GB LPDDR4
+- up to 128GB high performance eMMC
+- Optional wireless LAN, 2.4GHz and 5.0GHz IEEE 802.11b/g/n/ac wireless,
+  BT 5.0, BLE with onboard and external antenna.
+- Gigabit Ethernet PHY
+
+Radxa CM3 needs to mount on top of this IO board in order to create
+complete Radxa CM3 IO board platform.
+
+Since Radxa CM3 is compatible with Raspberry Pi CM4 pinout so it is
+possible to mount Radxa CM3 on top of the Rasberry Pi CM4 IO board.
+
+Add support for Radxa CM3.
+
+Co-developed-by: FUKAUMI Naoki <[email protected]>
+Signed-off-by: FUKAUMI Naoki <[email protected]>
+Signed-off-by: Jagan Teki <[email protected]>
+Link: https://lore.kernel.org/r/[email protected]
+Signed-off-by: Heiko Stuebner <[email protected]>
+---
+ .../boot/dts/rockchip/rk3566-radxa-cm3.dtsi   | 345 ++++++++++++++++++
+ 1 file changed, 345 insertions(+)
+ create mode 100644 arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3.dtsi
+
+--- /dev/null
++++ b/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3.dtsi
+@@ -0,0 +1,345 @@
++// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
++/*
++ * Copyright (c) 2022 Radxa Limited
++ * Copyright (c) 2022 Amarula Solutions(India)
++ */
++
++#include <dt-bindings/gpio/gpio.h>
++#include <dt-bindings/leds/common.h>
++
++/ {
++	compatible = "radxa,radxa-cm3", "rockchip,rk3566";
++
++	aliases {
++		mmc0 = &sdhci;
++	};
++
++	leds {
++		compatible = "gpio-leds";
++
++		led-0 {
++			gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
++			color = <LED_COLOR_ID_GREEN>;
++			function = LED_FUNCTION_STATUS;
++			linux,default-trigger = "timer";
++			default-state = "on";
++			pinctrl-names = "default";
++			pinctrl-0 = <&user_led2>;
++		};
++	};
++
++	vcc_sys: vcc-sys-regulator {
++		compatible = "regulator-fixed";
++		regulator-name = "vcc_sys";
++		regulator-always-on;
++		regulator-boot-on;
++		regulator-min-microvolt = <5000000>;
++		regulator-max-microvolt = <5000000>;
++	};
++
++	vcc_1v8: vcc-1v8-regulator {
++		compatible = "regulator-fixed";
++		regulator-name = "vcc_1v8";
++		regulator-always-on;
++		regulator-boot-on;
++		regulator-min-microvolt = <1800000>;
++		regulator-max-microvolt = <1800000>;
++		vin-supply = <&vcc_1v8_p>;
++	};
++
++	vcc_3v3: vcc-3v3-regulator {
++		compatible = "regulator-fixed";
++		regulator-name = "vcc_3v3";
++		regulator-always-on;
++		regulator-boot-on;
++		regulator-min-microvolt = <3300000>;
++		regulator-max-microvolt = <3300000>;
++		vin-supply = <&vcc3v3_sys>;
++	};
++
++	vcca_1v8: vcca-1v8-regulator {
++		compatible = "regulator-fixed";
++		regulator-name = "vcca_1v8";
++		regulator-always-on;
++		regulator-boot-on;
++		regulator-min-microvolt = <1800000>;
++		regulator-max-microvolt = <1800000>;
++		vin-supply = <&vcc_1v8_p>;
++	};
++};
++
++&cpu0 {
++	cpu-supply = <&vdd_cpu>;
++};
++
++&cpu1 {
++	cpu-supply = <&vdd_cpu>;
++};
++
++&cpu2 {
++	cpu-supply = <&vdd_cpu>;
++};
++
++&cpu3 {
++	cpu-supply = <&vdd_cpu>;
++};
++
++&gpu {
++	mali-supply = <&vdd_gpu_npu>;
++	status = "okay";
++};
++
++&i2c0 {
++	status = "okay";
++
++	vdd_cpu: regulator@1c {
++		compatible = "tcs,tcs4525";
++		reg = <0x1c>;
++		fcs,suspend-voltage-selector = <1>;
++		regulator-name = "vdd_cpu";
++		regulator-always-on;
++		regulator-boot-on;
++		regulator-min-microvolt = <712500>;
++		regulator-max-microvolt = <1390000>;
++		regulator-ramp-delay = <2300>;
++		vin-supply = <&vcc_sys>;
++
++		regulator-state-mem {
++			regulator-off-in-suspend;
++		};
++	};
++
++	rk817: pmic@20 {
++		compatible = "rockchip,rk817";
++		reg = <0x20>;
++		#clock-cells = <1>;
++		clock-output-names = "rk817-clkout1", "rk817-clkout2";
++		interrupt-parent = <&gpio0>;
++		interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
++		pinctrl-names = "default";
++		pinctrl-0 = <&pmic_int_l>;
++		rockchip,system-power-controller;
++		wakeup-source;
++
++		vcc1-supply = <&vcc_sys>;
++		vcc2-supply = <&vcc_sys>;
++		vcc3-supply = <&vcc_sys>;
++		vcc4-supply = <&vcc_sys>;
++		vcc5-supply = <&vcc_sys>;
++		vcc6-supply = <&vcc_sys>;
++		vcc7-supply = <&vcc_sys>;
++
++		regulators {
++			vdd_logic: DCDC_REG1 {
++				regulator-name = "vdd_logic";
++				regulator-always-on;
++				regulator-boot-on;
++				regulator-initial-mode = <0x2>;
++				regulator-min-microvolt = <500000>;
++				regulator-max-microvolt = <1350000>;
++				regulator-ramp-delay = <6001>;
++				regulator-state-mem {
++					regulator-on-in-suspend;
++					regulator-suspend-microvolt = <900000>;
++				};
++			};
++
++			vdd_gpu_npu: DCDC_REG2 {
++				regulator-name = "vdd_gpu_npu";
++				regulator-always-on;
++				regulator-boot-on;
++				regulator-initial-mode = <0x2>;
++				regulator-min-microvolt = <500000>;
++				regulator-max-microvolt = <1350000>;
++				regulator-ramp-delay = <6001>;
++				regulator-state-mem {
++					regulator-off-in-suspend;
++				};
++			};
++
++			vcc_ddr: DCDC_REG3 {
++				regulator-name = "vcc_ddr";
++				regulator-always-on;
++				regulator-boot-on;
++				regulator-initial-mode = <0x2>;
++				regulator-state-mem {
++					regulator-on-in-suspend;
++				};
++			};
++
++			vcc3v3_sys: DCDC_REG4 {
++				regulator-name = "vcc3v3_sys";
++				regulator-always-on;
++				regulator-boot-on;
++				regulator-initial-mode = <0x2>;
++				regulator-min-microvolt = <3300000>;
++				regulator-max-microvolt = <3300000>;
++				regulator-state-mem {
++					regulator-on-in-suspend;
++					regulator-suspend-microvolt = <3300000>;
++				};
++			};
++
++			vcca1v8_pmu: LDO_REG1 {
++				regulator-name = "vcca1v8_pmu";
++				regulator-always-on;
++				regulator-boot-on;
++				regulator-min-microvolt = <1800000>;
++				regulator-max-microvolt = <1800000>;
++				regulator-state-mem {
++					regulator-on-in-suspend;
++					regulator-suspend-microvolt = <1800000>;
++				};
++			};
++
++			vdda_0v9: LDO_REG2 {
++				regulator-name = "vdda_0v9";
++				regulator-always-on;
++				regulator-boot-on;
++				regulator-min-microvolt = <900000>;
++				regulator-max-microvolt = <900000>;
++				regulator-state-mem {
++					regulator-off-in-suspend;
++				};
++			};
++
++			vdda0v9_pmu: LDO_REG3 {
++				regulator-name = "vdda0v9_pmu";
++				regulator-always-on;
++				regulator-boot-on;
++				regulator-min-microvolt = <900000>;
++				regulator-max-microvolt = <900000>;
++				regulator-state-mem {
++					regulator-on-in-suspend;
++					regulator-suspend-microvolt = <900000>;
++				};
++			};
++
++			vccio_acodec: LDO_REG4 {
++				regulator-name = "vccio_acodec";
++				regulator-always-on;
++				regulator-boot-on;
++				regulator-min-microvolt = <3300000>;
++				regulator-max-microvolt = <3300000>;
++				regulator-state-mem {
++					regulator-off-in-suspend;
++				};
++			};
++
++			vccio_sd: LDO_REG5 {
++				regulator-name = "vccio_sd";
++				regulator-always-on;
++				regulator-boot-on;
++				regulator-min-microvolt = <1800000>;
++				regulator-max-microvolt = <3300000>;
++				regulator-state-mem {
++					regulator-off-in-suspend;
++				};
++			};
++
++			vcc3v3_pmu: LDO_REG6 {
++				regulator-name = "vcc3v3_pmu";
++				regulator-always-on;
++				regulator-boot-on;
++				regulator-min-microvolt = <3300000>;
++				regulator-max-microvolt = <3300000>;
++				regulator-state-mem {
++					regulator-on-in-suspend;
++					regulator-suspend-microvolt = <3300000>;
++				};
++			};
++
++			vcc_1v8_p: LDO_REG7 {
++				regulator-name = "vcc_1v8_p";
++				regulator-always-on;
++				regulator-boot-on;
++				regulator-min-microvolt = <1800000>;
++				regulator-max-microvolt = <1800000>;
++				regulator-state-mem {
++					regulator-off-in-suspend;
++				};
++			};
++
++			vcc1v8_dvp: LDO_REG8 {
++				regulator-name = "vcc1v8_dvp";
++				regulator-always-on;
++				regulator-boot-on;
++				regulator-min-microvolt = <1800000>;
++				regulator-max-microvolt = <1800000>;
++				regulator-state-mem {
++					regulator-off-in-suspend;
++				};
++			};
++
++			vcc2v8_dvp: LDO_REG9 {
++				regulator-name = "vcc2v8_dvp";
++				regulator-always-on;
++				regulator-boot-on;
++				regulator-min-microvolt = <2800000>;
++				regulator-max-microvolt = <2800000>;
++				regulator-state-mem {
++					regulator-off-in-suspend;
++				};
++			};
++
++		};
++	};
++};
++
++&pinctrl {
++	pmic {
++		pmic_int_l: pmic-int-l {
++			rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
++		};
++	};
++
++	leds {
++		user_led2: user-led2 {
++			rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
++		};
++	};
++};
++
++&pmu_io_domains {
++	pmuio1-supply = <&vcc3v3_pmu>;
++	pmuio2-supply = <&vcc_3v3>;
++	vccio1-supply = <&vccio_acodec>;
++	vccio2-supply = <&vcc_1v8>;
++	vccio3-supply = <&vccio_sd>;
++	vccio4-supply = <&vcc_1v8>;
++	vccio5-supply = <&vcc_3v3>;
++	vccio6-supply = <&vcc_3v3>;
++	vccio7-supply = <&vcc_3v3>;
++	status = "okay";
++};
++
++&saradc {
++	vref-supply = <&vcca_1v8>;
++	status = "okay";
++};
++
++&sdhci {
++	bus-width = <8>;
++	max-frequency = <200000000>;
++	mmc-hs200-1_8v;
++	non-removable;
++	pinctrl-names = "default";
++	pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>;
++	vmmc-supply = <&vcc_3v3>;
++	vqmmc-supply = <&vcc_1v8>;
++	status = "okay";
++};
++
++&usb2phy0 {
++	status = "okay";
++};
++
++&usb2phy1 {
++	status = "okay";
++};
++
++&tsadc {
++	rockchip,hw-tshut-mode = <1>;
++	rockchip,hw-tshut-polarity = <0>;
++	status = "okay";
++};

target/linux/rockchip/patches-6.1/019-v6.3-arm64-dts-rockchip-Enable-WiFi-BT-support-for-Radxa-CM3.patch

@@ -0,0 +1,134 @@
+From af5a803bf212e077e5fb7a1d4cf6be02f74a74ca Mon Sep 17 00:00:00 2001
+From: Jagan Teki <[email protected]>
+Date: Wed, 25 Jan 2023 21:40:23 +0530
+Subject: [PATCH] arm64: dts: rockchip: rk3566: Enable WiFi, BT support for
+ Radxa CM3
+
+Radxa Compute Module 3 has an onboard AW_CM256SM WiFi/BT module.
+
+Add nodes for enabling it.
+
+Signed-off-by: Jagan Teki <[email protected]>
+Link: https://lore.kernel.org/r/[email protected]
+Signed-off-by: Heiko Stuebner <[email protected]>
+---
+ .../boot/dts/rockchip/rk3566-radxa-cm3.dtsi   | 80 +++++++++++++++++++
+ 1 file changed, 80 insertions(+)
+
+--- a/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3.dtsi
++++ b/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3.dtsi
+@@ -66,6 +66,15 @@
+ 		regulator-max-microvolt = <1800000>;
+ 		vin-supply = <&vcc_1v8_p>;
+ 	};
++
++	sdio_pwrseq: pwrseq-sdio {
++		compatible = "mmc-pwrseq-simple";
++		clocks = <&rk817 1>;
++		clock-names = "ext_clock";
++		pinctrl-names = "default";
++		pinctrl-0 = <&wifi_reg_on_h>;
++		reset-gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_LOW>;
++	};
+ };
+ 
+ &cpu0 {
+@@ -287,6 +296,20 @@
+ };
+ 
+ &pinctrl {
++	bluetooth {
++		bt_host_wake_h: bt-host-wake-h {
++			rockchip,pins = <2 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
++		};
++
++		bt_reg_on_h: bt-reg-on-h {
++			rockchip,pins = <2 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>;
++		};
++
++		bt_wake_host_h: bt-wake-host-h {
++			rockchip,pins = <2 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
++		};
++	};
++
+ 	pmic {
+ 		pmic_int_l: pmic-int-l {
+ 			rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
+@@ -298,6 +321,16 @@
+ 			rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
+ 		};
+ 	};
++
++	wifi {
++		wifi_reg_on_h: wifi-reg-on-h {
++			rockchip,pins = <2 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
++		};
++
++		wifi_host_wake_h: wifi-host-wake-h {
++			rockchip,pins = <2 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
++		};
++	};
+ };
+ 
+ &pmu_io_domains {
+@@ -318,6 +351,34 @@
+ 	status = "okay";
+ };
+ 
++&sdmmc1 {
++	#address-cells = <1>;
++	#size-cells = <0>;
++	bus-width = <4>;
++	disable-wp;
++	cap-sd-highspeed;
++	cap-sdio-irq;
++	keep-power-in-suspend;
++	mmc-pwrseq = <&sdio_pwrseq>;
++	non-removable;
++	pinctrl-names = "default";
++	pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_clk &sdmmc1_cmd>;
++	sd-uhs-sdr104;
++	vmmc-supply = <&vcc_3v3>;
++	vqmmc-supply = <&vcc_1v8>;
++	status = "okay";
++
++	wifi@1 {
++		compatible = "brcm,bcm43455-fmac";
++		reg = <1>;
++		interrupt-parent = <&gpio2>;
++		interrupts = <RK_PC1 IRQ_TYPE_LEVEL_HIGH>;
++		interrupt-names = "host-wake";
++		pinctrl-names = "default";
++		pinctrl-0 = <&wifi_host_wake_h>;
++	};
++};
++
+ &sdhci {
+ 	bus-width = <8>;
+ 	max-frequency = <200000000>;
+@@ -330,6 +391,25 @@
+ 	status = "okay";
+ };
+ 
++&uart1 {
++	pinctrl-names = "default";
++	pinctrl-0 = <&uart1m0_ctsn &uart1m0_rtsn &uart1m0_xfer>;
++	status = "okay";
++
++	bluetooth {
++		compatible = "brcm,bcm4345c5";
++		clocks = <&rk817 1>;
++		clock-names = "lpo";
++		device-wakeup-gpios = <&gpio2 RK_PB2 GPIO_ACTIVE_HIGH>;
++		host-wakeup-gpios = <&gpio2 RK_PB1 GPIO_ACTIVE_HIGH>;
++		reset-gpios = <&gpio2 RK_PC0 GPIO_ACTIVE_LOW>;
++		pinctrl-names = "default";
++		pinctrl-0 = <&bt_host_wake_h &bt_reg_on_h &bt_wake_host_h>;
++		vbat-supply = <&vcc_3v3>;
++		vddio-supply = <&vcc_1v8>;
++	};
++};
++
+ &usb2phy0 {
+ 	status = "okay";
+ };

target/linux/rockchip/patches-6.1/020-v6.4-arm64-dts-rockchip-Enable-USB-OTG-for-rk3566-Radxa-CM3.patch

@@ -0,0 +1,32 @@
+From 477ed3ade6a46e445b4e2348b710c51df4f6f4b1 Mon Sep 17 00:00:00 2001
+From: Manoj Sai <[email protected]>
+Date: Thu, 23 Feb 2023 19:29:29 +0530
+Subject: [PATCH] arm64: dts: rockchip: Enable USB OTG for rk3566 Radxa CM3
+
+Enable USB OTG support for Radxa Compute Module 3 IO Board
+
+Signed-off-by: Manoj Sai <[email protected]>
+Signed-off-by: Jagan Teki <[email protected]>
+Link: https://lore.kernel.org/r/[email protected]
+Signed-off-by: Heiko Stuebner <[email protected]>
+---
+ arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3-io.dts | 8 ++++++++
+ 1 file changed, 8 insertions(+)
+
+--- a/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3-io.dts
++++ b/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3-io.dts
+@@ -254,6 +254,14 @@
+ 	status = "okay";
+ };
+ 
++&usb2phy0_otg {
++	status = "okay";
++};
++
++&usb_host0_xhci {
++	status = "okay";
++};
++
+ &vop {
+ 	assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
+ 	assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;

target/linux/rockchip/patches-6.1/021-v6.3-arm64-dts-rockchip-Fix-compatible-for-Radxa-CM3.patch

@@ -0,0 +1,45 @@
+From 8f19828844f20b22182719cf53be64f8c955aee8 Mon Sep 17 00:00:00 2001
+From: Jagan Teki <[email protected]>
+Date: Mon, 23 Jan 2023 12:46:50 +0530
+Subject: [PATCH] arm64: dts: rockchip: Fix compatible for Radxa CM3
+
+The compatible string "radxa,radxa-cm3" referring the product name
+as "Radxa Radxa CM3" but the actual product name is "Radxa CM3".
+
+Fix the compatible strings.
+
+Fixes: 24a28d3eb07d ("dt-bindings: arm: rockchip: Add Radxa Compute Module 3")
+Fixes: 7469ab529bca ("arm64: dts: rockchip: Add rk3566 based Radxa Compute Module 3")
+Fixes: 096ebfb74b19 ("arm64: dts: rockchip: Add Radxa Compute Module 3 IO board")
+Suggested-by: Krzysztof Kozlowski <[email protected]>
+Signed-off-by: Jagan Teki <[email protected]>
+Acked-by: Krzysztof Kozlowski <[email protected]>
+Link: https://lore.kernel.org/r/[email protected]
+Signed-off-by: Heiko Stuebner <[email protected]>
+---
+ arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3-io.dts | 2 +-
+ arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3.dtsi   | 2 +-
+ 2 files changed, 2 insertions(+), 2 deletions(-)
+
+--- a/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3-io.dts
++++ b/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3-io.dts
+@@ -11,7 +11,7 @@
+ 
+ / {
+ 	model = "Radxa Compute Module 3(CM3) IO Board";
+-	compatible = "radxa,radxa-cm3-io", "radxa,radxa-cm3", "rockchip,rk3566";
++	compatible = "radxa,cm3-io", "radxa,cm3", "rockchip,rk3566";
+ 
+ 	aliases {
+ 		mmc1 = &sdmmc0;
+--- a/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3.dtsi
++++ b/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3.dtsi
+@@ -8,7 +8,7 @@
+ #include <dt-bindings/leds/common.h>
+ 
+ / {
+-	compatible = "radxa,radxa-cm3", "rockchip,rk3566";
++	compatible = "radxa,cm3", "rockchip,rk3566";
+ 
+ 	aliases {
+ 		mmc0 = &sdhci;

target/linux/rockchip/patches-6.1/022-v6.5-arm64-dts-rockchip-minor-whitespace-cleanup-around.patch

@@ -0,0 +1,28 @@
+From f99a75f11f46a24dabb33e90893eebf61dca0566 Mon Sep 17 00:00:00 2001
+From: Krzysztof Kozlowski <[email protected]>
+Date: Sun, 2 Jul 2023 20:52:42 +0200
+Subject: [PATCH] arm64: dts: rockchip: minor whitespace cleanup around '='
+
+The DTS code coding style expects exactly one space before and after '='
+sign.
+
+Signed-off-by: Krzysztof Kozlowski <[email protected]>
+Link: https://lore.kernel.org/r/[email protected]
+Signed-off-by: Heiko Stuebner <[email protected]>
+---
+ .../boot/dts/rockchip/rk3566-radxa-cm3-io.dts    |  4 ++--
+ 1 files changed, 2 insertions(+), 2 deletions(-)
+
+--- a/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3-io.dts
++++ b/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3-io.dts
+@@ -137,8 +137,8 @@
+ 
+ &mdio1 {
+ 	rgmii_phy1: ethernet-phy@0 {
+-		compatible="ethernet-phy-ieee802.3-c22";
+-		reg= <0x0>;
++		compatible = "ethernet-phy-ieee802.3-c22";
++		reg = <0x0>;
+ 	};
+ };
+ 

target/linux/rockchip/patches-6.1/023-v6.8-arm64-dts-rockchip-Add-ethernet0-alias-to-the-dts-for-RK3566-boards.patch

@@ -0,0 +1,28 @@
+From 36d9b3ae708e865cdab95692db5a24c5d975383d Mon Sep 17 00:00:00 2001
+From: Dragan Simic <[email protected]>
+Date: Tue, 12 Dec 2023 09:01:39 +0100
+Subject: [PATCH] arm64: dts: rockchip: Add ethernet0 alias to the dts for
+ RK3566 boards
+
+Add ethernet0 alias to the board dts files for a few supported RK3566 boards
+that had it missing.  Also, remove the ethernet0 alias from one RK3566 SoM
+dtsi file, which doesn't enable the GMAC, and add the ethernet0 alias back to
+the dependent board dts files, which actually enable the GMAC.
+
+Signed-off-by: Dragan Simic <[email protected]>
+Link: https://lore.kernel.org/r/d2a272e0ae0fff0adfab8bb0238243b11d348799.1702368023.git.dsimic@manjaro.org
+Signed-off-by: Heiko Stuebner <[email protected]>
+---
+ arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3-io.dts     | 1 +
+ 1 files changed, 1 insertions(+), 0 deletion(-)
+
+--- a/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3-io.dts
++++ b/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3-io.dts
+@@ -14,6 +14,7 @@
+ 	compatible = "radxa,cm3-io", "radxa,cm3", "rockchip,rk3566";
+ 
+ 	aliases {
++		ethernet0 = &gmac1;
+ 		mmc1 = &sdmmc0;
+ 	};
+ 

target/linux/rockchip/patches-6.1/024-v6.3-arm64-dts-rockchip-Add-Radxa-CM3I-E25.patch

@@ -0,0 +1,689 @@
+From 2bf2f4d9f673013a58109626b87329310537a611 Mon Sep 17 00:00:00 2001
+From: Chukun Pan <[email protected]>
+Date: Fri, 9 Dec 2022 18:25:24 +0800
+Subject: [PATCH] arm64: dts: rockchip: Add Radxa CM3I E25
+
+Radxa E25 is a network application carrier board for the Radxa CM3
+Industrial (CM3I) SoM, which is based on the Rockchip RK3568 SoC.
+
+It has the following features:
+
+- MicroSD card socket, on board eMMC flash
+- 2x 2.5GbE Realtek RTL8125B Ethernet transceiver
+- 1x USB Type-C port (Power and Serial console)
+- 1x USB 3.0 OTG port
+- mini PCIe socket (USB or PCIe)
+- ngff PCIe socket (USB or SATA)
+- 1x User LED and 16x RGB LEDs
+- 26-pin expansion header
+
+Signed-off-by: Chukun Pan <[email protected]>
+Link: https://lore.kernel.org/r/[email protected]
+Signed-off-by: Heiko Stuebner <[email protected]>
+---
+ arch/arm64/boot/dts/rockchip/Makefile         |   1 +
+ .../boot/dts/rockchip/rk3568-radxa-cm3i.dtsi  | 416 ++++++++++++++++++
+ .../boot/dts/rockchip/rk3568-radxa-e25.dts    | 229 ++++++++++
+ 3 files changed, 646 insertions(+)
+ create mode 100644 arch/arm64/boot/dts/rockchip/rk3568-radxa-cm3i.dtsi
+ create mode 100644 arch/arm64/boot/dts/rockchip/rk3568-radxa-e25.dts
+
+--- a/arch/arm64/boot/dts/rockchip/Makefile
++++ b/arch/arm64/boot/dts/rockchip/Makefile
+@@ -78,4 +78,5 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-bp
+ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-evb1-v10.dtb
+ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-nanopi-r5c.dtb
+ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-nanopi-r5s.dtb
++dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-radxa-e25.dtb
+ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-rock-3a.dtb
+--- /dev/null
++++ b/arch/arm64/boot/dts/rockchip/rk3568-radxa-cm3i.dtsi
+@@ -0,0 +1,416 @@
++// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
++
++#include <dt-bindings/gpio/gpio.h>
++#include <dt-bindings/leds/common.h>
++#include <dt-bindings/pinctrl/rockchip.h>
++#include "rk3568.dtsi"
++
++/ {
++	model = "Radxa CM3 Industrial Board";
++	compatible = "radxa,cm3i", "rockchip,rk3568";
++
++	aliases {
++		mmc0 = &sdhci;
++	};
++
++	chosen {
++		stdout-path = "serial2:115200n8";
++	};
++
++	gpio-leds {
++		compatible = "gpio-leds";
++
++		led_user: led-0 {
++			gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
++			function = LED_FUNCTION_HEARTBEAT;
++			color = <LED_COLOR_ID_GREEN>;
++			linux,default-trigger = "heartbeat";
++			pinctrl-names = "default";
++			pinctrl-0 = <&led_user_en>;
++		};
++	};
++
++	pcie30_avdd0v9: pcie30-avdd0v9-regulator {
++		compatible = "regulator-fixed";
++		regulator-name = "pcie30_avdd0v9";
++		regulator-always-on;
++		regulator-boot-on;
++		regulator-min-microvolt = <900000>;
++		regulator-max-microvolt = <900000>;
++		vin-supply = <&vcc3v3_sys>;
++	};
++
++	pcie30_avdd1v8: pcie30-avdd1v8-regulator {
++		compatible = "regulator-fixed";
++		regulator-name = "pcie30_avdd1v8";
++		regulator-always-on;
++		regulator-boot-on;
++		regulator-min-microvolt = <1800000>;
++		regulator-max-microvolt = <1800000>;
++		vin-supply = <&vcc3v3_sys>;
++	};
++
++	vcc3v3_sys: vcc3v3-sys-regulator {
++		compatible = "regulator-fixed";
++		regulator-name = "vcc3v3_sys";
++		regulator-always-on;
++		regulator-boot-on;
++		regulator-min-microvolt = <3300000>;
++		regulator-max-microvolt = <3300000>;
++		vin-supply = <&vcc5v_input>;
++	};
++
++	vcc5v0_sys: vcc5v0-sys-regulator {
++		compatible = "regulator-fixed";
++		regulator-name = "vcc5v0_sys";
++		regulator-always-on;
++		regulator-boot-on;
++		regulator-min-microvolt = <5000000>;
++		regulator-max-microvolt = <5000000>;
++		vin-supply = <&vcc5v_input>;
++	};
++
++	/* labeled +5v_input in schematic */
++	vcc5v_input: vcc5v-input-regulator {
++		compatible = "regulator-fixed";
++		regulator-name = "vcc5v_input";
++		regulator-always-on;
++		regulator-boot-on;
++		regulator-min-microvolt = <5000000>;
++		regulator-max-microvolt = <5000000>;
++	};
++};
++
++&combphy0 {
++	status = "okay";
++};
++
++&combphy1 {
++	status = "okay";
++};
++
++&combphy2 {
++	status = "okay";
++};
++
++&cpu0 {
++	cpu-supply = <&vdd_cpu>;
++};
++
++&cpu1 {
++	cpu-supply = <&vdd_cpu>;
++};
++
++&cpu2 {
++	cpu-supply = <&vdd_cpu>;
++};
++
++&cpu3 {
++	cpu-supply = <&vdd_cpu>;
++};
++
++&display_subsystem {
++	status = "disabled";
++};
++
++&gpu {
++	mali-supply = <&vdd_gpu>;
++	status = "okay";
++};
++
++&i2c0 {
++	status = "okay";
++
++	vdd_cpu: regulator@1c {
++		compatible = "tcs,tcs4525";
++		reg = <0x1c>;
++		fcs,suspend-voltage-selector = <1>;
++		regulator-name = "vdd_cpu";
++		regulator-always-on;
++		regulator-boot-on;
++		regulator-min-microvolt = <800000>;
++		regulator-max-microvolt = <1150000>;
++		regulator-ramp-delay = <2300>;
++		vin-supply = <&vcc5v_input>;
++
++		regulator-state-mem {
++			regulator-off-in-suspend;
++		};
++	};
++
++	rk809: pmic@20 {
++		compatible = "rockchip,rk809";
++		reg = <0x20>;
++		interrupt-parent = <&gpio0>;
++		interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
++		#clock-cells = <1>;
++		pinctrl-names = "default";
++		pinctrl-0 = <&pmic_int>;
++		rockchip,system-power-controller;
++		wakeup-source;
++
++		vcc1-supply = <&vcc3v3_sys>;
++		vcc2-supply = <&vcc3v3_sys>;
++		vcc3-supply = <&vcc3v3_sys>;
++		vcc4-supply = <&vcc3v3_sys>;
++		vcc5-supply = <&vcc3v3_sys>;
++		vcc6-supply = <&vcc3v3_sys>;
++		vcc7-supply = <&vcc3v3_sys>;
++		vcc8-supply = <&vcc3v3_sys>;
++		vcc9-supply = <&vcc3v3_sys>;
++
++		regulators {
++			vdd_logic: DCDC_REG1 {
++				regulator-name = "vdd_logic";
++				regulator-always-on;
++				regulator-boot-on;
++				regulator-init-microvolt = <900000>;
++				regulator-initial-mode = <0x2>;
++				regulator-min-microvolt = <500000>;
++				regulator-max-microvolt = <1350000>;
++				regulator-ramp-delay = <6001>;
++
++				regulator-state-mem {
++					regulator-off-in-suspend;
++				};
++			};
++
++			vdd_gpu: DCDC_REG2 {
++				regulator-name = "vdd_gpu";
++				regulator-always-on;
++				regulator-init-microvolt = <900000>;
++				regulator-initial-mode = <0x2>;
++				regulator-min-microvolt = <500000>;
++				regulator-max-microvolt = <1350000>;
++				regulator-ramp-delay = <6001>;
++
++				regulator-state-mem {
++					regulator-off-in-suspend;
++				};
++			};
++
++			vcc_ddr: DCDC_REG3 {
++				regulator-name = "vcc_ddr";
++				regulator-always-on;
++				regulator-boot-on;
++				regulator-initial-mode = <0x2>;
++
++				regulator-state-mem {
++					regulator-on-in-suspend;
++				};
++			};
++
++			vdd_npu: DCDC_REG4 {
++				regulator-name = "vdd_npu";
++				regulator-init-microvolt = <900000>;
++				regulator-initial-mode = <0x2>;
++				regulator-min-microvolt = <500000>;
++				regulator-max-microvolt = <1350000>;
++				regulator-ramp-delay = <6001>;
++
++				regulator-state-mem {
++					regulator-off-in-suspend;
++				};
++			};
++
++			vcc_1v8: DCDC_REG5 {
++				regulator-name = "vcc_1v8";
++				regulator-always-on;
++				regulator-boot-on;
++				regulator-min-microvolt = <1800000>;
++				regulator-max-microvolt = <1800000>;
++
++				regulator-state-mem {
++					regulator-off-in-suspend;
++				};
++			};
++
++			vdda0v9_image: LDO_REG1 {
++				regulator-name = "vdda0v9_image";
++				regulator-min-microvolt = <900000>;
++				regulator-max-microvolt = <900000>;
++
++				regulator-state-mem {
++					regulator-off-in-suspend;
++				};
++			};
++
++			vdda_0v9: LDO_REG2 {
++				regulator-name = "vdda_0v9";
++				regulator-always-on;
++				regulator-boot-on;
++				regulator-min-microvolt = <900000>;
++				regulator-max-microvolt = <900000>;
++
++				regulator-state-mem {
++					regulator-off-in-suspend;
++				};
++			};
++
++			vdda0v9_pmu: LDO_REG3 {
++				regulator-name = "vdda0v9_pmu";
++				regulator-always-on;
++				regulator-boot-on;
++				regulator-min-microvolt = <900000>;
++				regulator-max-microvolt = <900000>;
++
++				regulator-state-mem {
++					regulator-on-in-suspend;
++					regulator-suspend-microvolt = <900000>;
++				};
++			};
++
++			vccio_acodec: LDO_REG4 {
++				regulator-name = "vccio_acodec";
++				regulator-always-on;
++				regulator-min-microvolt = <3300000>;
++				regulator-max-microvolt = <3300000>;
++
++				regulator-state-mem {
++					regulator-off-in-suspend;
++				};
++			};
++
++			vccio_sd: LDO_REG5 {
++				regulator-name = "vccio_sd";
++				regulator-min-microvolt = <1800000>;
++				regulator-max-microvolt = <3300000>;
++
++				regulator-state-mem {
++					regulator-off-in-suspend;
++				};
++			};
++
++			vcc3v3_pmu: LDO_REG6 {
++				regulator-name = "vcc3v3_pmu";
++				regulator-always-on;
++				regulator-boot-on;
++				regulator-min-microvolt = <3300000>;
++				regulator-max-microvolt = <3300000>;
++
++				regulator-state-mem {
++					regulator-on-in-suspend;
++					regulator-suspend-microvolt = <3300000>;
++				};
++			};
++
++			vcca_1v8: LDO_REG7 {
++				regulator-name = "vcca_1v8";
++				regulator-always-on;
++				regulator-boot-on;
++				regulator-min-microvolt = <1800000>;
++				regulator-max-microvolt = <1800000>;
++
++				regulator-state-mem {
++					regulator-off-in-suspend;
++				};
++			};
++
++			vcca1v8_pmu: LDO_REG8 {
++				regulator-name = "vcca1v8_pmu";
++				regulator-always-on;
++				regulator-boot-on;
++				regulator-min-microvolt = <1800000>;
++				regulator-max-microvolt = <1800000>;
++
++				regulator-state-mem {
++					regulator-on-in-suspend;
++					regulator-suspend-microvolt = <1800000>;
++				};
++			};
++
++			vcca1v8_image: LDO_REG9 {
++				regulator-name = "vcca1v8_image";
++				regulator-min-microvolt = <1800000>;
++				regulator-max-microvolt = <1800000>;
++
++				regulator-state-mem {
++					regulator-off-in-suspend;
++				};
++			};
++
++			vcc_3v3: SWITCH_REG1 {
++				regulator-name = "vcc_3v3";
++				regulator-always-on;
++				regulator-boot-on;
++
++				regulator-state-mem {
++					regulator-off-in-suspend;
++				};
++			};
++
++			vcc3v3_sd: SWITCH_REG2 {
++				regulator-name = "vcc3v3_sd";
++
++				regulator-state-mem {
++					regulator-off-in-suspend;
++				};
++			};
++		};
++	};
++};
++
++&pinctrl {
++	leds {
++		led_user_en: led_user_en {
++			rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
++		};
++	};
++
++	pmic {
++		pmic_int: pmic_int {
++			rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
++		};
++	};
++};
++
++&pmu_io_domains {
++	pmuio1-supply = <&vcc3v3_pmu>;
++	pmuio2-supply = <&vcc3v3_pmu>;
++	vccio1-supply = <&vccio_acodec>;
++	vccio2-supply = <&vcc_1v8>;
++	vccio3-supply = <&vccio_sd>;
++	vccio4-supply = <&vcc_1v8>;
++	vccio5-supply = <&vcc_3v3>;
++	vccio6-supply = <&vcc_1v8>;
++	vccio7-supply = <&vcc_3v3>;
++	status = "okay";
++};
++
++&saradc {
++	vref-supply = <&vcca_1v8>;
++	status = "okay";
++};
++
++&sdhci {
++	bus-width = <8>;
++	max-frequency = <200000000>;
++	non-removable;
++	pinctrl-names = "default";
++	pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>;
++	vmmc-supply = <&vcc_3v3>;
++	vqmmc-supply = <&vcc_1v8>;
++	status = "okay";
++};
++
++&tsadc {
++	rockchip,hw-tshut-mode = <1>;
++	rockchip,hw-tshut-polarity = <0>;
++	status = "okay";
++};
++
++&uart2 {
++	status = "okay";
++};
++
++&usb2phy0 {
++	status = "okay";
++};
++
++&usb2phy1 {
++	status = "okay";
++};
++
++&usb_host0_xhci {
++	extcon = <&usb2phy0>;
++};
+--- /dev/null
++++ b/arch/arm64/boot/dts/rockchip/rk3568-radxa-e25.dts
+@@ -0,0 +1,229 @@
++// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
++
++/dts-v1/;
++#include "rk3568-radxa-cm3i.dtsi"
++
++/ {
++	model = "Radxa E25";
++	compatible = "radxa,e25", "rockchip,rk3568";
++
++	aliases {
++		mmc0 = &sdmmc0;
++		mmc1 = &sdhci;
++	};
++
++	pwm-leds {
++		compatible = "pwm-leds-multicolor";
++
++		multi-led {
++			color = <LED_COLOR_ID_RGB>;
++			max-brightness = <255>;
++
++			led-red {
++				color = <LED_COLOR_ID_RED>;
++				pwms = <&pwm1 0 1000000 0>;
++			};
++
++			led-green {
++				color = <LED_COLOR_ID_GREEN>;
++				pwms = <&pwm2 0 1000000 0>;
++			};
++
++			led-blue {
++				color = <LED_COLOR_ID_BLUE>;
++				pwms = <&pwm12 0 1000000 0>;
++			};
++		};
++	};
++
++	vbus_typec: vbus-typec-regulator {
++		compatible = "regulator-fixed";
++		enable-active-high;
++		gpio = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>;
++		pinctrl-names = "default";
++		pinctrl-0 = <&vbus_typec_en>;
++		regulator-name = "vbus_typec";
++		regulator-min-microvolt = <5000000>;
++		regulator-max-microvolt = <5000000>;
++		vin-supply = <&vcc5v0_sys>;
++	};
++
++	vcc3v3_minipcie: vcc3v3-minipcie-regulator {
++		compatible = "regulator-fixed";
++		enable-active-high;
++		gpio = <&gpio3 RK_PA7 GPIO_ACTIVE_HIGH>;
++		pinctrl-names = "default";
++		pinctrl-0 = <&minipcie_enable_h>;
++		regulator-name = "vcc3v3_minipcie";
++		regulator-min-microvolt = <5000000>;
++		regulator-max-microvolt = <5000000>;
++		vin-supply = <&vcc5v0_sys>;
++	};
++
++	vcc3v3_ngff: vcc3v3-ngff-regulator {
++		compatible = "regulator-fixed";
++		enable-active-high;
++		gpio = <&gpio0 RK_PD6 GPIO_ACTIVE_HIGH>;
++		pinctrl-names = "default";
++		pinctrl-0 = <&ngffpcie_enable_h>;
++		regulator-name = "vcc3v3_ngff";
++		regulator-min-microvolt = <3300000>;
++		regulator-max-microvolt = <3300000>;
++		vin-supply = <&vcc5v0_sys>;
++	};
++
++	/* actually fed by vcc5v0_sys, dependent
++	 * on pi6c clock generator
++	 */
++	vcc3v3_pcie30x1: vcc3v3-pcie30x1-regulator {
++		compatible = "regulator-fixed";
++		enable-active-high;
++		gpio = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>;
++		pinctrl-names = "default";
++		pinctrl-0 = <&pcie30x1_enable_h>;
++		regulator-name = "vcc3v3_pcie30x1";
++		regulator-min-microvolt = <3300000>;
++		regulator-max-microvolt = <3300000>;
++		vin-supply = <&vcc3v3_pi6c_05>;
++	};
++
++	vcc3v3_pi6c_05: vcc3v3-pi6c-05-regulator {
++		compatible = "regulator-fixed";
++		enable-active-high;
++		gpios = <&gpio0 RK_PC7 GPIO_ACTIVE_HIGH>;
++		pinctrl-names = "default";
++		pinctrl-0 = <&pcie_enable_h>;
++		regulator-name = "vcc3v3_pcie";
++		regulator-min-microvolt = <3300000>;
++		regulator-max-microvolt = <3300000>;
++		vin-supply = <&vcc5v0_sys>;
++	};
++};
++
++&pcie2x1 {
++	pinctrl-names = "default";
++	pinctrl-0 = <&pcie20_reset_h>;
++	reset-gpios = <&gpio1 RK_PB2 GPIO_ACTIVE_HIGH>;
++	vpcie3v3-supply = <&vcc3v3_pi6c_05>;
++	status = "okay";
++};
++
++&pcie30phy {
++	data-lanes = <1 2>;
++	status = "okay";
++};
++
++&pcie3x1 {
++	num-lanes = <1>;
++	pinctrl-names = "default";
++	pinctrl-0 = <&pcie30x1m0_pins>;
++	reset-gpios = <&gpio0 RK_PC3 GPIO_ACTIVE_HIGH>;
++	vpcie3v3-supply = <&vcc3v3_pcie30x1>;
++	status = "okay";
++};
++
++&pcie3x2 {
++	num-lanes = <1>;
++	pinctrl-names = "default";
++	pinctrl-0 = <&pcie30x2_reset_h>;
++	reset-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>;
++	vpcie3v3-supply = <&vcc3v3_pi6c_05>;
++	status = "okay";
++};
++
++&pinctrl {
++	pcie {
++		pcie20_reset_h: pcie20-reset-h {
++			rockchip,pins = <1 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
++		};
++
++		pcie30x1_enable_h: pcie30x1-enable-h {
++			rockchip,pins = <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
++		};
++
++		pcie30x2_reset_h: pcie30x2-reset-h {
++			rockchip,pins = <2 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>;
++		};
++
++		pcie_enable_h: pcie-enable-h {
++			rockchip,pins = <0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>;
++		};
++	};
++
++	usb {
++		minipcie_enable_h: minipcie-enable-h {
++			rockchip,pins = <3 RK_PA7 RK_FUNC_GPIO &pcfg_pull_none>;
++		};
++
++		ngffpcie_enable_h: ngffpcie-enable-h {
++			rockchip,pins = <0 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>;
++		};
++
++		vbus_typec_en: vbus_typec_en {
++			rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
++		};
++	};
++};
++
++&pwm1 {
++	status = "okay";
++};
++
++&pwm2 {
++	status = "okay";
++};
++
++&pwm12 {
++	pinctrl-names = "default";
++	pinctrl-0 = <&pwm12m1_pins>;
++	status = "okay";
++};
++
++&sdmmc0 {
++	bus-width = <4>;
++	cap-sd-highspeed;
++	cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
++	/* Also used in pcie30x1_clkreqnm0 */
++	disable-wp;
++	pinctrl-names = "default";
++	pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd>;
++	sd-uhs-sdr104;
++	vmmc-supply = <&vcc3v3_sd>;
++	vqmmc-supply = <&vccio_sd>;
++	status = "okay";
++};
++
++&usb_host0_ehci {
++	status = "okay";
++};
++
++&usb_host0_ohci {
++	status = "okay";
++};
++
++&usb_host0_xhci {
++	status = "okay";
++};
++
++&usb_host1_ehci {
++	status = "okay";
++};
++
++&usb_host1_ohci {
++	status = "okay";
++};
++
++&usb2phy0_otg {
++	phy-supply = <&vbus_typec>;
++	status = "okay";
++};
++
++&usb2phy1_host {
++	phy-supply = <&vcc3v3_minipcie>;
++	status = "okay";
++};
++
++&usb2phy1_otg {
++	phy-supply = <&vcc3v3_ngff>;
++	status = "okay";
++};

target/linux/rockchip/patches-6.1/025-v6.3-arm64-dts-rockchip-Update-eMMC-SD.patch

@@ -0,0 +1,48 @@
+From c80992abd2877590059e9cb254213c16824e2106 Mon Sep 17 00:00:00 2001
+From: Jagan Teki <[email protected]>
+Date: Wed, 18 Jan 2023 13:34:53 +0530
+Subject: [PATCH] arm64: dts: rockchip: Update eMMC, SD aliases for Radxa SoM
+ boards
+
+Radxa has produced Compute Modules like RK3399pro VMARC and CM3i with
+onboarding eMMC flash, so the eMMC is the primary MMC device.
+
+On the other hand, Rockchip boot orders start from eMMC from an MMC
+device perspective.
+
+Mark, the eMMC has mmc0 to satisfy the above two conditions.
+
+Reported-by: FUKAUMI Naoki <[email protected]>
+Signed-off-by: Jagan Teki <[email protected]>
+Link: https://lore.kernel.org/r/[email protected]
+Signed-off-by: Heiko Stuebner <[email protected]>
+---
+ arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi | 4 ++--
+ arch/arm64/boot/dts/rockchip/rk3568-radxa-e25.dts     | 3 +--
+ 2 files changed, 3 insertions(+), 4 deletions(-)
+
+--- a/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi
++++ b/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi
+@@ -13,8 +13,8 @@
+ 	compatible = "vamrs,rk3399pro-vmarc-som", "rockchip,rk3399pro";
+ 
+ 	aliases {
+-		mmc0 = &sdmmc;
+-		mmc1 = &sdhci;
++		mmc0 = &sdhci;
++		mmc1 = &sdmmc;
+ 	};
+ 
+ 	vcc3v3_pcie: vcc-pcie-regulator {
+--- a/arch/arm64/boot/dts/rockchip/rk3568-radxa-e25.dts
++++ b/arch/arm64/boot/dts/rockchip/rk3568-radxa-e25.dts
+@@ -8,8 +8,7 @@
+ 	compatible = "radxa,e25", "rockchip,rk3568";
+ 
+ 	aliases {
+-		mmc0 = &sdmmc0;
+-		mmc1 = &sdhci;
++		mmc1 = &sdmmc0;
+ 	};
+ 
+ 	pwm-leds {

target/linux/rockchip/patches-6.1/026-v6.3-arm64-dts-rockchip-Add-missing-CM3i.patch

@@ -0,0 +1,35 @@
+From c4d2b02d63ee38b381fbc886c02eecfec4f981cc Mon Sep 17 00:00:00 2001
+From: Jagan Teki <[email protected]>
+Date: Mon, 23 Jan 2023 12:46:51 +0530
+Subject: [PATCH] arm64: dts: rockchip: Add missing CM3i fallback compatible
+ for Radxa E25
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+In order to function the Radxa E25 Carrier board, it is mandatory to
+mount the Radxa CM3i module. 
+
+Add Radxa CM3i compatible as fallback compatible to string to satisfy
+the Module and Carrier board topology.
+
+Fixes: 2bf2f4d9f673 ("arm64: dts: rockchip: Add Radxa CM3I E25")
+Cc: Chukun Pan <[email protected]>
+Signed-off-by: Jagan Teki <[email protected]>
+Link: https://lore.kernel.org/r/[email protected]
+Signed-off-by: Heiko Stuebner <[email protected]>
+---
+ arch/arm64/boot/dts/rockchip/rk3568-radxa-e25.dts | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/arch/arm64/boot/dts/rockchip/rk3568-radxa-e25.dts
++++ b/arch/arm64/boot/dts/rockchip/rk3568-radxa-e25.dts
+@@ -5,7 +5,7 @@
+ 
+ / {
+ 	model = "Radxa E25";
+-	compatible = "radxa,e25", "rockchip,rk3568";
++	compatible = "radxa,e25", "radxa,cm3i", "rockchip,rk3568";
+ 
+ 	aliases {
+ 		mmc1 = &sdmmc0;

target/linux/rockchip/patches-6.1/027-v6.3-arm64-dts-rockchip-Correct-the-model-name-for-Radxa-E25.patch

@@ -0,0 +1,28 @@
+From ef9134d9bbce071c9e4ebdcbb6f8fb1a5dd0a67e Mon Sep 17 00:00:00 2001
+From: Jagan Teki <[email protected]>
+Date: Mon, 23 Jan 2023 12:46:53 +0530
+Subject: [PATCH] arm64: dts: rockchip: Correct the model name for Radxa E25
+
+Radxa E25 is a Carrier board, so update the model name for Radxa E25
+as suggested by the Radxa website.
+
+Fixes: 2bf2f4d9f673 ("arm64: dts: rockchip: Add Radxa CM3I E25")
+Cc: Chukun Pan <[email protected]>
+Signed-off-by: Jagan Teki <[email protected]>
+Link: https://lore.kernel.org/r/[email protected]
+Signed-off-by: Heiko Stuebner <[email protected]>
+---
+ arch/arm64/boot/dts/rockchip/rk3568-radxa-e25.dts | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/arch/arm64/boot/dts/rockchip/rk3568-radxa-e25.dts
++++ b/arch/arm64/boot/dts/rockchip/rk3568-radxa-e25.dts
+@@ -4,7 +4,7 @@
+ #include "rk3568-radxa-cm3i.dtsi"
+ 
+ / {
+-	model = "Radxa E25";
++	model = "Radxa E25 Carrier Board";
+ 	compatible = "radxa,e25", "radxa,cm3i", "rockchip,rk3568";
+ 
+ 	aliases {

target/linux/rockchip/patches-6.1/028-v6.6-arm64-dts-rockchip-Fix-PCIe-regulators-on-Radxa-E25.patch

@@ -0,0 +1,79 @@
+From a87852e37f782257ebc57cc44a0d3fbf806471f6 Mon Sep 17 00:00:00 2001
+From: Jonas Karlman <[email protected]>
+Date: Mon, 24 Jul 2023 14:52:16 +0000
+Subject: [PATCH] arm64: dts: rockchip: Fix PCIe regulators on Radxa E25
+
+Despite its name, the regulator vcc3v3_pcie30x1 has nothing to do with
+pcie30x1. Instead, it supply power to VBAT1-5 on the M.2 KEY B port as
+seen on page 8 of the schematic [1].
+
+pcie30x1 is used for the mini PCIe slot, and as seen on page 9 the
+vcc3v3_minipcie regulator is instead related to pcie30x1.
+
+The M.2 KEY B port can be used for WWAN USB2 modules or SATA drives.
+
+Use correct regulator vcc3v3_minipcie for pcie30x1.
+
+[1] https://dl.radxa.com/cm3p/e25/radxa-e25-v1.4-sch.pdf
+
+Fixes: 2bf2f4d9f673 ("arm64: dts: rockchip: Add Radxa CM3I E25")
+Signed-off-by: Jonas Karlman <[email protected]>
+Link: https://lore.kernel.org/r/[email protected]
+Signed-off-by: Heiko Stuebner <[email protected]>
+---
+ .../arm64/boot/dts/rockchip/rk3568-radxa-e25.dts | 16 ++++++++--------
+ 1 file changed, 8 insertions(+), 8 deletions(-)
+
+--- a/arch/arm64/boot/dts/rockchip/rk3568-radxa-e25.dts
++++ b/arch/arm64/boot/dts/rockchip/rk3568-radxa-e25.dts
+@@ -47,6 +47,9 @@
+ 		vin-supply = <&vcc5v0_sys>;
+ 	};
+ 
++	/* actually fed by vcc5v0_sys, dependent
++	 * on pi6c clock generator
++	 */
+ 	vcc3v3_minipcie: vcc3v3-minipcie-regulator {
+ 		compatible = "regulator-fixed";
+ 		enable-active-high;
+@@ -54,9 +57,9 @@
+ 		pinctrl-names = "default";
+ 		pinctrl-0 = <&minipcie_enable_h>;
+ 		regulator-name = "vcc3v3_minipcie";
+-		regulator-min-microvolt = <5000000>;
+-		regulator-max-microvolt = <5000000>;
+-		vin-supply = <&vcc5v0_sys>;
++		regulator-min-microvolt = <3300000>;
++		regulator-max-microvolt = <3300000>;
++		vin-supply = <&vcc3v3_pi6c_05>;
+ 	};
+ 
+ 	vcc3v3_ngff: vcc3v3-ngff-regulator {
+@@ -71,9 +74,6 @@
+ 		vin-supply = <&vcc5v0_sys>;
+ 	};
+ 
+-	/* actually fed by vcc5v0_sys, dependent
+-	 * on pi6c clock generator
+-	 */
+ 	vcc3v3_pcie30x1: vcc3v3-pcie30x1-regulator {
+ 		compatible = "regulator-fixed";
+ 		enable-active-high;
+@@ -83,7 +83,7 @@
+ 		regulator-name = "vcc3v3_pcie30x1";
+ 		regulator-min-microvolt = <3300000>;
+ 		regulator-max-microvolt = <3300000>;
+-		vin-supply = <&vcc3v3_pi6c_05>;
++		vin-supply = <&vcc5v0_sys>;
+ 	};
+ 
+ 	vcc3v3_pi6c_05: vcc3v3-pi6c-05-regulator {
+@@ -117,7 +117,7 @@
+ 	pinctrl-names = "default";
+ 	pinctrl-0 = <&pcie30x1m0_pins>;
+ 	reset-gpios = <&gpio0 RK_PC3 GPIO_ACTIVE_HIGH>;
+-	vpcie3v3-supply = <&vcc3v3_pcie30x1>;
++	vpcie3v3-supply = <&vcc3v3_minipcie>;
+ 	status = "okay";
+ };
+ 

target/linux/rockchip/patches-6.1/029-v6.6-arm64-dts-rockchip-Enable-SATA-on-Radxa-E25.patch

@@ -0,0 +1,41 @@
+From 2bdfe84fbd57a4ed9fd65a67210442559ce078f0 Mon Sep 17 00:00:00 2001
+From: Jonas Karlman <[email protected]>
+Date: Mon, 24 Jul 2023 14:52:16 +0000
+Subject: [PATCH] arm64: dts: rockchip: Enable SATA on Radxa E25
+
+The M.2 KEY B port can be used for WWAN USB2 modules or SATA drives.
+
+Enable sata1 node to fix use of SATA drives on the M.2 slot.
+
+Fixes: 2bf2f4d9f673 ("arm64: dts: rockchip: Add Radxa CM3I E25")
+Signed-off-by: Jonas Karlman <[email protected]>
+Link: https://lore.kernel.org/r/[email protected]
+Signed-off-by: Heiko Stuebner <[email protected]>
+---
+ arch/arm64/boot/dts/rockchip/rk3568-radxa-e25.dts | 8 ++++++++
+ 1 file changed, 8 insertions(+)
+
+--- a/arch/arm64/boot/dts/rockchip/rk3568-radxa-e25.dts
++++ b/arch/arm64/boot/dts/rockchip/rk3568-radxa-e25.dts
+@@ -99,6 +99,10 @@
+ 	};
+ };
+ 
++&combphy1 {
++	phy-supply = <&vcc3v3_pcie30x1>;
++};
++
+ &pcie2x1 {
+ 	pinctrl-names = "default";
+ 	pinctrl-0 = <&pcie20_reset_h>;
+@@ -178,6 +182,10 @@
+ 	status = "okay";
+ };
+ 
++&sata1 {
++	status = "okay";
++};
++
+ &sdmmc0 {
+ 	bus-width = <4>;
+ 	cap-sd-highspeed;

target/linux/rockchip/patches-6.1/030-v6.9-arm64-dts-rockchip-adjust-vendor-on-Banana-Pi-R2-Pro.patch

@@ -0,0 +1,27 @@
+From 437644753208092f642b7669c69da606aa07dfb4 Mon Sep 17 00:00:00 2001
+From: Tim Lunn <[email protected]>
+Date: Wed, 14 Feb 2024 15:07:30 +1100
+Subject: [PATCH] arm64: dts: rockchip: adjust vendor on Banana Pi R2 Pro board
+
+Adjust compatible string to match the board vendor of Sinovoip
+
+Signed-off-by: Tim Lunn <[email protected]>
+Reviewed-by: Dragan Simic <[email protected]>
+Acked-by: Conor Dooley <[email protected]>
+Link: https://lore.kernel.org/r/[email protected]
+Signed-off-by: Heiko Stuebner <[email protected]>
+---
+ arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts
++++ b/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts
+@@ -13,7 +13,7 @@
+ 
+ / {
+ 	model = "Bananapi-R2 Pro (RK3568) DDR4 Board";
+-	compatible = "rockchip,rk3568-bpi-r2pro", "rockchip,rk3568";
++	compatible = "sinovoip,rk3568-bpi-r2pro", "rockchip,rk3568";
+ 
+ 	aliases {
+ 		ethernet0 = &gmac0;

target/linux/rockchip/patches-6.1/031-v6.10arm64-dts-rockchip-set-PHY-address-of-MT7531-switch-.patch

@@ -0,0 +1,40 @@
+From a2ac2a1b02590a22a236c43c455f421cdede45f5 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= <[email protected]>
+Date: Thu, 14 Mar 2024 15:24:35 +0300
+Subject: [PATCH] arm64: dts: rockchip: set PHY address of MT7531 switch to
+ 0x1f
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+The MT7531 switch listens on PHY address 0x1f on an MDIO bus. I've got two
+findings that support this. There's no bootstrapping option to change the
+PHY address of the switch. The Linux driver hardcodes 0x1f as the PHY
+address of the switch. So the reg property on the device tree is currently
+ignored by the Linux driver.
+
+Therefore, describe the correct PHY address on Banana Pi BPI-R2 Pro that
+has this switch.
+
+Signed-off-by: Arınç ÜNAL <[email protected]>
+Fixes: c1804463e5c6 ("arm64: dts: rockchip: Add mt7531 dsa node to BPI-R2-Pro board")
+Link: https://lore.kernel.org/r/20240314-for-rockchip-mt7531-phy-address-v1-1-743b5873358f@arinc9.com
+Signed-off-by: Heiko Stuebner <[email protected]>
+---
+ arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts | 4 ++--
+ 1 file changed, 2 insertions(+), 2 deletions(-)
+
+--- a/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts
++++ b/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts
+@@ -521,9 +521,9 @@
+ 	#address-cells = <1>;
+ 	#size-cells = <0>;
+ 
+-	switch@0 {
++	switch@1f {
+ 		compatible = "mediatek,mt7531";
+-		reg = <0>;
++		reg = <0x1f>;
+ 
+ 		ports {
+ 			#address-cells = <1>;

target/linux/rockchip/patches-6.1/032-v6.10-arm64-dts-rockchip-regulator-for-sd-needs-to-be-alwa.patch

@@ -0,0 +1,33 @@
+From 433d54818f64a2fe0562f8c04c7a81f562368515 Mon Sep 17 00:00:00 2001
+From: Jose Ignacio Tornos Martinez <[email protected]>
+Date: Tue, 5 Mar 2024 15:32:18 +0100
+Subject: [PATCH] arm64: dts: rockchip: regulator for sd needs to be always on
+ for BPI-R2Pro
+
+With default dts configuration for BPI-R2Pro, the regulator for sd card is
+powered off when reboot is commanded, and the only solution to detect the
+sd card again, and therefore, allow rebooting from there, is to do a
+hardware reset.
+
+Configure the regulator for sd to be always on for BPI-R2Pro in order to
+avoid this issue.
+
+Fixes: f901aaadaa2a ("arm64: dts: rockchip: Add Bananapi R2 Pro")
+Signed-off-by: Jose Ignacio Tornos Martinez <[email protected]>
+Link: https://lore.kernel.org/r/[email protected]
+Signed-off-by: Heiko Stuebner <[email protected]>
+---
+ arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts | 2 ++
+ 1 file changed, 2 insertions(+)
+
+--- a/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts
++++ b/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts
+@@ -412,6 +412,8 @@
+ 
+ 			vccio_sd: LDO_REG5 {
+ 				regulator-name = "vccio_sd";
++				regulator-always-on;
++				regulator-boot-on;
+ 				regulator-min-microvolt = <1800000>;
+ 				regulator-max-microvolt = <3300000>;
+ 

target/linux/rockchip/patches-6.1/100-rockchip-use-system-LED-for-OpenWrt.patch

@@ -0,0 +1,77 @@
+From 6731d2c9039fbe1ecf21915eab3acee0a999508a Mon Sep 17 00:00:00 2001
+From: David Bauer <[email protected]>
+Date: Fri, 10 Jul 2020 21:38:20 +0200
+Subject: [PATCH] rockchip: use system LED for OpenWrt
+
+Use the SYS LED on the casing for showing system status.
+
+This patch is kept separate from the NanoPi R2S support patch, as i plan
+on submitting the device support upstream.
+
+Signed-off-by: David Bauer <[email protected]>
+---
+ arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts | 9 ++++++++-
+ 1 file changed, 8 insertions(+), 1 deletion(-)
+
+--- a/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts
++++ b/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts
+@@ -6,6 +6,7 @@
+ /dts-v1/;
+ 
+ #include <dt-bindings/input/input.h>
++#include <dt-bindings/leds/common.h>
+ #include <dt-bindings/gpio/gpio.h>
+ #include "rk3328.dtsi"
+ 
+@@ -16,6 +17,11 @@
+ 	aliases {
+ 		ethernet1 = &rtl8153;
+ 		mmc0 = &sdmmc;
++
++		led-boot = &sys_led;
++		led-failsafe = &sys_led;
++		led-running = &sys_led;
++		led-upgrade = &sys_led;
+ 	};
+ 
+ 	chosen {
+@@ -48,19 +54,22 @@
+ 		pinctrl-names = "default";
+ 
+ 		lan_led: led-0 {
++			color = <LED_COLOR_ID_GREEN>;
++			function = LED_FUNCTION_LAN;
+ 			gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>;
+-			label = "nanopi-r2s:green:lan";
+ 		};
+ 
+ 		sys_led: led-1 {
++			color = <LED_COLOR_ID_RED>;
++			function = LED_FUNCTION_STATUS;
+ 			gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
+-			label = "nanopi-r2s:red:sys";
+ 			default-state = "on";
+ 		};
+ 
+ 		wan_led: led-2 {
++			color = <LED_COLOR_ID_GREEN>;
++			function = LED_FUNCTION_WAN;
+ 			gpios = <&gpio2 RK_PC2 GPIO_ACTIVE_HIGH>;
+-			label = "nanopi-r2s:green:wan";
+ 		};
+ 	};
+ 
+--- a/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts
++++ b/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts
+@@ -13,6 +13,11 @@
+ 	aliases {
+ 		mmc0 = &sdmmc;
+ 		mmc1 = &emmc;
++
++		led-boot = &power_led;
++		led-failsafe = &power_led;
++		led-running = &power_led;
++		led-upgrade = &power_led;
+ 	};
+ 
+ 	chosen {

target/linux/rockchip/patches-6.1/103-arm64-rockchip-add-OF-node-for-USB-eth-on-NanoPi-R2S.patch

@@ -0,0 +1,24 @@
+From 2795c8b31a686bdb8338f9404d18ef7a154f0d75 Mon Sep 17 00:00:00 2001
+From: David Bauer <[email protected]>
+Date: Sun, 26 Jul 2020 13:32:59 +0200
+Subject: [PATCH] arm64: rockchip: add OF node for USB eth on NanoPi R2S
+
+This adds the OF node for the USB3 ethernet adapter on the FriendlyARM
+NanoPi R2S. Add the correct value for the RTL8153 LED configuration
+register to match the blink behavior of the other port on the device.
+
+Signed-off-by: David Bauer <[email protected]>
+---
+ arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts | 7 +++++++
+ 1 file changed, 1 insertions(+)
+
+--- a/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts
++++ b/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts
+@@ -406,6 +406,7 @@
+ 	rtl8153: device@2 {
+ 		compatible = "usbbda,8153";
+ 		reg = <2>;
++		realtek,led-data = <0x87>;
+ 	};
+ };
+ 

target/linux/rockchip/patches-6.1/105-nanopi-r4s-sd-signalling.patch

@@ -0,0 +1,36 @@
+From: David Bauer <[email protected]>
+Subject: arm64: dts: rockchip: disable UHS modes for NanoPi R4S
+
+The NanoPi R4S leaves the SD card in 1.8V signalling when rebooting
+while U-Boot requires the card to be in 3.3V mode.
+
+Remove UHS support from the SD controller so the card remains in 3.3V
+mode. This reduces transfer speeds but ensures a reboot whether from
+userspace or following a kernel panic is always working.
+
+Signed-off-by: David Bauer <[email protected]>
+
+--- a/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts
++++ b/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts
+@@ -335,7 +335,6 @@
+ 	sd-uhs-sdr12;
+ 	sd-uhs-sdr25;
+ 	sd-uhs-sdr50;
+-	sd-uhs-sdr104;
+ 	vmmc-supply = <&vcc_sd>;
+ 	vqmmc-supply = <&vcc_sdio>;
+ 	status = "okay";
+--- a/arch/arm64/boot/dts/rockchip/rk3399-nanopi-r4s.dts
++++ b/arch/arm64/boot/dts/rockchip/rk3399-nanopi-r4s.dts
+@@ -112,6 +112,11 @@
+ 	status = "disabled";
+ };
+ 
++&sdmmc {
++	/delete-property/ sd-uhs-sdr104;
++	cap-sd-highspeed;
++};
++
+ &u2phy0_host {
+ 	phy-supply = <&vdd_5v>;
+ };

target/linux/rockchip/patches-6.1/106-r4s-openwrt-leds.patch

@@ -0,0 +1,16 @@
+--- a/arch/arm64/boot/dts/rockchip/rk3399-nanopi-r4s.dts
++++ b/arch/arm64/boot/dts/rockchip/rk3399-nanopi-r4s.dts
+@@ -19,6 +19,13 @@
+ 	model = "FriendlyElec NanoPi R4S";
+ 	compatible = "friendlyarm,nanopi-r4s", "rockchip,rk3399";
+ 
++	aliases {
++		led-boot = &sys_led;
++		led-failsafe = &sys_led;
++		led-running = &sys_led;
++		led-upgrade = &sys_led;
++	};
++
+ 	/delete-node/ display-subsystem;
+ 
+ 	gpio-leds {

target/linux/rockchip/patches-6.1/107-arm64-dts-rockchip-Update-LED-properties-for-Orange-.patch

@@ -0,0 +1,40 @@
+From d2166e3b3680bd2b206aebf1e1ce4c0d346f3c50 Mon Sep 17 00:00:00 2001
+From: Tianling Shen <[email protected]>
+Date: Fri, 19 May 2023 12:10:52 +0800
+Subject: [PATCH] arm64: dts: rockchip: Update LED properties for Orange Pi R1
+ Plus
+
+Add OpenWrt's LED aliases for showing system status.
+
+Signed-off-by: Tianling Shen <[email protected]>
+---
+ .../dts/rockchip/rk3328-orangepi-r1-plus.dts    | 17 +++++++++--------
+ 1 file changed, 9 insertions(+), 8 deletions(-)
+
+--- a/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dts
++++ b/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dts
+@@ -17,6 +17,11 @@
+ 	aliases {
+ 		ethernet1 = &rtl8153;
+ 		mmc0 = &sdmmc;
++
++		led-boot = &status_led;
++		led-failsafe = &status_led;
++		led-running = &status_led;
++		led-upgrade = &status_led;
+ 	};
+ 
+ 	chosen {
+@@ -41,11 +46,10 @@
+ 			gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>;
+ 		};
+ 
+-		led-1 {
++		status_led: led-1 {
+ 			function = LED_FUNCTION_STATUS;
+ 			color = <LED_COLOR_ID_RED>;
+ 			gpios = <&gpio3 RK_PC5 GPIO_ACTIVE_HIGH>;
+-			linux,default-trigger = "heartbeat";
+ 		};
+ 
+ 		led-2 {

target/linux/rockchip/patches-6.1/108-arm64-dts-rockchip-add-LED-configuration-to-Orange-P.patch

@@ -0,0 +1,24 @@
+From b46a530d12ada422b9d5b2b97059e0d3ed950b40 Mon Sep 17 00:00:00 2001
+From: Tianling Shen <[email protected]>
+Date: Fri, 19 May 2023 12:38:04 +0800
+Subject: [PATCH] arm64: dts: rockchip: add LED configuration to Orange Pi R1
+ Plus
+
+Add the correct value for the RTL8153 LED configuration register to
+match the blink behavior of the other port on the device.
+
+Signed-off-by: Tianling Shen <[email protected]>
+---
+ arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dts | 1 +
+ 1 file changed, 1 insertion(+)
+
+--- a/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dts
++++ b/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dts
+@@ -365,6 +365,7 @@
+ 	rtl8153: device@2 {
+ 		compatible = "usbbda,8153";
+ 		reg = <2>;
++		realtek,led-data = <0x87>;
+ 	};
+ };
+ 

target/linux/rockchip/patches-6.1/109-nanopc-t4-add-led-aliases.patch

@@ -0,0 +1,16 @@
+--- a/arch/arm64/boot/dts/rockchip/rk3399-nanopc-t4.dts
++++ b/arch/arm64/boot/dts/rockchip/rk3399-nanopc-t4.dts
+@@ -15,6 +15,13 @@
+ 	model = "FriendlyElec NanoPC-T4";
+ 	compatible = "friendlyarm,nanopc-t4", "rockchip,rk3399";
+ 
++	aliases {
++		led-boot = &status_led;
++		led-failsafe = &status_led;
++		led-running = &status_led;
++		led-upgrade = &status_led;
++	};
++
+ 	vcc12v0_sys: vcc12v0-sys {
+ 		compatible = "regulator-fixed";
+ 		regulator-always-on;

target/linux/rockchip/patches-6.1/110-arm64-dts-rockchip-Update-LED-properties-for-NanoPi-.patch

@@ -0,0 +1,45 @@
+From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
+From: Tianling Shen <[email protected]>
+Date: Tue Jun 20 16:45:27 2023 +0800
+Subject: [PATCH] arm64: dts: rockchip: Update LED properties for NanoPi R5
+ series
+
+Add OpenWrt's LED aliases for showing system status.
+
+Signed-off-by: Tianling Shen <[email protected]>
+---
+
+--- a/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5c.dts
++++ b/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5c.dts
+@@ -40,7 +40,6 @@
+ 		power_led: led-power {
+ 			color = <LED_COLOR_ID_RED>;
+ 			function = LED_FUNCTION_POWER;
+-			linux,default-trigger = "heartbeat";
+ 			gpios = <&gpio3 RK_PA2 GPIO_ACTIVE_HIGH>;
+ 		};
+ 
+--- a/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts
++++ b/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts
+@@ -39,7 +39,6 @@
+ 		power_led: led-power {
+ 			color = <LED_COLOR_ID_RED>;
+ 			function = LED_FUNCTION_POWER;
+-			linux,default-trigger = "heartbeat";
+ 			gpios = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>;
+ 		};
+ 
+--- a/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dtsi
++++ b/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dtsi
+@@ -18,6 +18,11 @@
+ 	aliases {
+ 		mmc0 = &sdmmc0;
+ 		mmc1 = &sdhci;
++
++		led-boot = &power_led;
++		led-failsafe = &power_led;
++		led-running = &power_led;
++		led-upgrade = &power_led;
+ 	};
+ 
+ 	chosen: chosen {

target/linux/rockchip/patches-6.1/111-radxa-cm3-io-add-led-aliases.patch

@@ -0,0 +1,36 @@
+From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
+From: Marius Durbaca <[email protected]>
+Date: Tue Feb 20 15:05:27 2024 +0200
+Subject: [PATCH] arm64: dts: rockchip: Update LED properties for Radxa 
+CM3 IO board
+
+Add OpenWrt's LED aliases for showing system status.
+
+Suggested-by: Tianling Shen <[email protected]>
+Signed-off-by: Marius Durbaca <[email protected]>
+---
+
+--- a/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3-io.dts
++++ b/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3-io.dts
+@@ -16,6 +16,10 @@
+ 	aliases {
+ 		ethernet0 = &gmac1;
+ 		mmc1 = &sdmmc0;
++		led-boot = &status_led;
++		led-failsafe = &status_led;
++		led-running = &status_led;
++		led-upgrade = &status_led;
+ 	};
+ 
+ 	chosen: chosen {
+--- a/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3.dtsi
++++ b/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3.dtsi
+@@ -17,7 +17,7 @@
+ 	leds {
+ 		compatible = "gpio-leds";
+ 
+-		led-0 {
++		status_led: led-0 {
+ 			gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
+ 			color = <LED_COLOR_ID_GREEN>;
+ 			function = LED_FUNCTION_STATUS;

target/linux/rockchip/patches-6.1/112-radxa-e25-add-led-aliases.patch

@@ -0,0 +1,24 @@
+From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
+From: Marius Durbaca <[email protected]>
+Date: Tue Feb 27 16:25:27 2024 +0200
+Subject: [PATCH] arm64: dts: rockchip: Update LED properties for Radxa 
+E25
+
+Add OpenWrt's LED aliases for showing system status.
+
+Signed-off-by: Marius Durbaca <[email protected]>
+---
+
+--- a/arch/arm64/boot/dts/rockchip/rk3568-radxa-e25.dts
++++ b/arch/arm64/boot/dts/rockchip/rk3568-radxa-e25.dts
+@@ -9,6 +9,10 @@
+ 
+ 	aliases {
+ 		mmc1 = &sdmmc0;
++		led-boot = &led_user;
++		led-failsafe = &led_user;
++		led-running = &led_user;
++		led-upgrade = &led_user;
+ 	};
+ 
+ 	pwm-leds {

target/linux/rockchip/patches-6.1/300-hwrng-add-Rockchip-SoC-hwrng-driver.patch

@@ -0,0 +1,339 @@
+From patchwork Sat Nov 12 14:10:58 2022
+Content-Type: text/plain; charset="utf-8"
+MIME-Version: 1.0
+Content-Transfer-Encoding: 7bit
+X-Patchwork-Submitter: Aurelien Jarno <[email protected]>
+X-Patchwork-Id: 13041222
+Return-Path: 
+ <linux-arm-kernel-bounces+linux-arm-kernel=archiver.kernel.org@lists.infradead.org>
+X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on
+	aws-us-west-2-korg-lkml-1.web.codeaurora.org
+From: Aurelien Jarno <[email protected]>
+To: Olivia Mackall <[email protected]>,
+	Herbert Xu <[email protected]>,
+	Rob Herring <[email protected]>,
+	Krzysztof Kozlowski <[email protected]>,
+	Heiko Stuebner <[email protected]>,
+	Philipp Zabel <[email protected]>,
+	Lin Jinhan <[email protected]>
+Cc: [email protected] (open list:HARDWARE RANDOM NUMBER GENERATOR
+ CORE),
+	[email protected] (open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE
+ BINDINGS),
+	[email protected] (moderated list:ARM/Rockchip SoC
+ support),
+	[email protected] (open list:ARM/Rockchip SoC support),
+	[email protected] (open list),
+	Aurelien Jarno <[email protected]>
+Subject: [PATCH v1 2/3] hwrng: add Rockchip SoC hwrng driver
+Date: Sat, 12 Nov 2022 15:10:58 +0100
+Message-Id: <[email protected]>
+In-Reply-To: <[email protected]>
+References: <[email protected]>
+MIME-Version: 1.0
+List-Id: <linux-arm-kernel.lists.infradead.org>
+
+Rockchip SoCs used to have a random number generator as part of their
+crypto device, and support for it has to be added to the corresponding
+driver. However newer Rockchip SoCs like the RK356x have an independent
+True Random Number Generator device. This patch adds a driver for it,
+greatly inspired from the downstream driver.
+
+The TRNG device does not seem to have a signal conditionner and the FIPS
+140-2 test returns a lot of failures. They can be reduced by increasing
+RK_RNG_SAMPLE_CNT, in a tradeoff between quality and speed. This value
+has been adjusted to get ~90% of successes and the quality value has
+been set accordingly.
+
+Signed-off-by: Aurelien Jarno <[email protected]>
+---
+ drivers/char/hw_random/Kconfig        |  14 ++
+ drivers/char/hw_random/Makefile       |   1 +
+ drivers/char/hw_random/rockchip-rng.c | 251 ++++++++++++++++++++++++++
+ 3 files changed, 266 insertions(+)
+ create mode 100644 drivers/char/hw_random/rockchip-rng.c
+
+--- a/drivers/char/hw_random/Kconfig
++++ b/drivers/char/hw_random/Kconfig
+@@ -549,6 +549,20 @@ config HW_RANDOM_CN10K
+ 	 To compile this driver as a module, choose M here.
+ 	 The module will be called cn10k_rng. If unsure, say Y.
+ 
++config HW_RANDOM_ROCKCHIP
++        tristate "Rockchip True Random Number Generator"
++        depends on HW_RANDOM && (ARCH_ROCKCHIP || COMPILE_TEST)
++        depends on HAS_IOMEM
++        default HW_RANDOM
++        help
++          This driver provides kernel-side support for the True Random Number
++          Generator hardware found on some Rockchip SoC like RK3566 or RK3568.
++
++          To compile this driver as a module, choose M here: the
++          module will be called rockchip-rng.
++
++          If unsure, say Y.
++
+ endif # HW_RANDOM
+ 
+ config UML_RANDOM
+--- a/drivers/char/hw_random/Makefile
++++ b/drivers/char/hw_random/Makefile
+@@ -47,3 +47,4 @@ obj-$(CONFIG_HW_RANDOM_XIPHERA) += xiphe
+ obj-$(CONFIG_HW_RANDOM_ARM_SMCCC_TRNG) += arm_smccc_trng.o
+ obj-$(CONFIG_HW_RANDOM_CN10K) += cn10k-rng.o
+ obj-$(CONFIG_HW_RANDOM_POLARFIRE_SOC) += mpfs-rng.o
++obj-$(CONFIG_HW_RANDOM_ROCKCHIP) += rockchip-rng.o
+--- /dev/null
++++ b/drivers/char/hw_random/rockchip-rng.c
+@@ -0,0 +1,251 @@
++// SPDX-License-Identifier: GPL-2.0
++/*
++ * rockchip-rng.c True Random Number Generator driver for Rockchip SoCs
++ *
++ * Copyright (c) 2018, Fuzhou Rockchip Electronics Co., Ltd.
++ * Copyright (c) 2022, Aurelien Jarno
++ * Authors:
++ *  Lin Jinhan <[email protected]>
++ *  Aurelien Jarno <[email protected]>
++ */
++#include <linux/clk.h>
++#include <linux/hw_random.h>
++#include <linux/io.h>
++#include <linux/iopoll.h>
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/of_platform.h>
++#include <linux/pm_runtime.h>
++#include <linux/reset.h>
++#include <linux/slab.h>
++
++#define RK_RNG_AUTOSUSPEND_DELAY	100
++#define RK_RNG_MAX_BYTE			32
++#define RK_RNG_POLL_PERIOD_US		100
++#define RK_RNG_POLL_TIMEOUT_US		10000
++
++/*
++ * TRNG collects osc ring output bit every RK_RNG_SAMPLE_CNT time. The value is
++ * a tradeoff between speed and quality and has been adjusted to get a quality
++ * of ~900 (~90% of FIPS 140-2 successes).
++ */
++#define RK_RNG_SAMPLE_CNT		1000
++
++/* TRNG registers from RK3568 TRM-Part2, section 5.4.1 */
++#define TRNG_RST_CTL			0x0004
++#define TRNG_RNG_CTL			0x0400
++#define TRNG_RNG_CTL_LEN_64_BIT		(0x00 << 4)
++#define TRNG_RNG_CTL_LEN_128_BIT	(0x01 << 4)
++#define TRNG_RNG_CTL_LEN_192_BIT	(0x02 << 4)
++#define TRNG_RNG_CTL_LEN_256_BIT	(0x03 << 4)
++#define TRNG_RNG_CTL_OSC_RING_SPEED_0	(0x00 << 2)
++#define TRNG_RNG_CTL_OSC_RING_SPEED_1	(0x01 << 2)
++#define TRNG_RNG_CTL_OSC_RING_SPEED_2	(0x02 << 2)
++#define TRNG_RNG_CTL_OSC_RING_SPEED_3	(0x03 << 2)
++#define TRNG_RNG_CTL_ENABLE		BIT(1)
++#define TRNG_RNG_CTL_START		BIT(0)
++#define TRNG_RNG_SAMPLE_CNT		0x0404
++#define TRNG_RNG_DOUT_0			0x0410
++#define TRNG_RNG_DOUT_1			0x0414
++#define TRNG_RNG_DOUT_2			0x0418
++#define TRNG_RNG_DOUT_3			0x041c
++#define TRNG_RNG_DOUT_4			0x0420
++#define TRNG_RNG_DOUT_5			0x0424
++#define TRNG_RNG_DOUT_6			0x0428
++#define TRNG_RNG_DOUT_7			0x042c
++
++struct rk_rng {
++	struct hwrng rng;
++	void __iomem *base;
++	struct reset_control *rst;
++	int clk_num;
++	struct clk_bulk_data *clk_bulks;
++};
++
++/* The mask determine the bits that are updated */
++static void rk_rng_write_ctl(struct rk_rng *rng, u32 val, u32 mask)
++{
++	writel_relaxed((mask << 16) | val, rng->base + TRNG_RNG_CTL);
++}
++
++static int rk_rng_init(struct hwrng *rng)
++{
++	struct rk_rng *rk_rng = container_of(rng, struct rk_rng, rng);
++	u32 reg;
++	int ret;
++
++	/* start clocks */
++	ret = clk_bulk_prepare_enable(rk_rng->clk_num, rk_rng->clk_bulks);
++	if (ret < 0) {
++		dev_err((struct device *) rk_rng->rng.priv,
++			"Failed to enable clks %d\n", ret);
++		return ret;
++	}
++
++	/* set the sample period */
++	writel(RK_RNG_SAMPLE_CNT, rk_rng->base + TRNG_RNG_SAMPLE_CNT);
++
++	/* set osc ring speed and enable it */
++	reg = TRNG_RNG_CTL_LEN_256_BIT |
++		   TRNG_RNG_CTL_OSC_RING_SPEED_0 |
++		   TRNG_RNG_CTL_ENABLE;
++	rk_rng_write_ctl(rk_rng, reg, 0xffff);
++
++	return 0;
++}
++
++static void rk_rng_cleanup(struct hwrng *rng)
++{
++	struct rk_rng *rk_rng = container_of(rng, struct rk_rng, rng);
++	u32 reg;
++
++	/* stop TRNG */
++	reg = 0;
++	rk_rng_write_ctl(rk_rng, reg, 0xffff);
++
++	/* stop clocks */
++	clk_bulk_disable_unprepare(rk_rng->clk_num, rk_rng->clk_bulks);
++}
++
++static int rk_rng_read(struct hwrng *rng, void *buf, size_t max, bool wait)
++{
++	struct rk_rng *rk_rng = container_of(rng, struct rk_rng, rng);
++	u32 reg;
++	int ret = 0;
++	int i;
++
++	pm_runtime_get_sync((struct device *) rk_rng->rng.priv);
++
++	/* Start collecting random data */
++	reg = TRNG_RNG_CTL_START;
++	rk_rng_write_ctl(rk_rng, reg, reg);
++
++	ret = readl_poll_timeout(rk_rng->base + TRNG_RNG_CTL, reg,
++				 !(reg & TRNG_RNG_CTL_START),
++				 RK_RNG_POLL_PERIOD_US,
++				 RK_RNG_POLL_TIMEOUT_US);
++	if (ret < 0)
++		goto out;
++
++	/* Read random data stored in big endian in the registers */
++	ret = min_t(size_t, max, RK_RNG_MAX_BYTE);
++	for (i = 0; i < ret; i += 4) {
++		reg = readl_relaxed(rk_rng->base + TRNG_RNG_DOUT_0 + i);
++		*(u32 *)(buf + i) = be32_to_cpu(reg);
++	}
++
++out:
++	pm_runtime_mark_last_busy((struct device *) rk_rng->rng.priv);
++	pm_runtime_put_sync_autosuspend((struct device *) rk_rng->rng.priv);
++
++	return ret;
++}
++
++static int rk_rng_probe(struct platform_device *pdev)
++{
++	struct device *dev = &pdev->dev;
++	struct rk_rng *rk_rng;
++	int ret;
++
++	rk_rng = devm_kzalloc(dev, sizeof(struct rk_rng), GFP_KERNEL);
++	if (!rk_rng)
++		return -ENOMEM;
++
++	rk_rng->base = devm_platform_ioremap_resource(pdev, 0);
++	if (IS_ERR(rk_rng->base))
++		return PTR_ERR(rk_rng->base);
++
++	rk_rng->clk_num = devm_clk_bulk_get_all(dev, &rk_rng->clk_bulks);
++	if (rk_rng->clk_num < 0)
++		return dev_err_probe(dev, rk_rng->clk_num,
++				     "Failed to get clks property\n");
++
++	rk_rng->rst = devm_reset_control_array_get(&pdev->dev, false, false);
++	if (IS_ERR(rk_rng->rst))
++		return dev_err_probe(dev, PTR_ERR(rk_rng->rst),
++				     "Failed to get reset property\n");
++
++	reset_control_assert(rk_rng->rst);
++	udelay(2);
++	reset_control_deassert(rk_rng->rst);
++
++	platform_set_drvdata(pdev, rk_rng);
++
++	rk_rng->rng.name = dev_driver_string(dev);
++#ifndef CONFIG_PM
++	rk_rng->rng.init = rk_rng_init;
++	rk_rng->rng.cleanup = rk_rng_cleanup;
++#endif
++	rk_rng->rng.read = rk_rng_read;
++	rk_rng->rng.priv = (unsigned long) dev;
++	rk_rng->rng.quality = 900;
++
++	pm_runtime_set_autosuspend_delay(dev, RK_RNG_AUTOSUSPEND_DELAY);
++	pm_runtime_use_autosuspend(dev);
++	pm_runtime_enable(dev);
++
++	ret = devm_hwrng_register(dev, &rk_rng->rng);
++	if (ret)
++		return dev_err_probe(&pdev->dev, ret, "Failed to register Rockchip hwrng\n");
++
++	dev_info(&pdev->dev, "Registered Rockchip hwrng\n");
++
++	return 0;
++}
++
++static int rk_rng_remove(struct platform_device *pdev)
++{
++	pm_runtime_disable(&pdev->dev);
++
++	return 0;
++}
++
++#ifdef CONFIG_PM
++static int rk_rng_runtime_suspend(struct device *dev)
++{
++	struct rk_rng *rk_rng = dev_get_drvdata(dev);
++
++	rk_rng_cleanup(&rk_rng->rng);
++
++	return 0;
++}
++
++static int rk_rng_runtime_resume(struct device *dev)
++{
++	struct rk_rng *rk_rng = dev_get_drvdata(dev);
++
++	return rk_rng_init(&rk_rng->rng);
++}
++#endif
++
++static const struct dev_pm_ops rk_rng_pm_ops = {
++	SET_RUNTIME_PM_OPS(rk_rng_runtime_suspend,
++				rk_rng_runtime_resume, NULL)
++	SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
++				pm_runtime_force_resume)
++};
++
++static const struct of_device_id rk_rng_dt_match[] = {
++	{
++		.compatible = "rockchip,rk3568-rng",
++	},
++	{},
++};
++
++MODULE_DEVICE_TABLE(of, rk_rng_dt_match);
++
++static struct platform_driver rk_rng_driver = {
++	.driver	= {
++		.name	= "rockchip-rng",
++		.pm	= &rk_rng_pm_ops,
++		.of_match_table = rk_rng_dt_match,
++	},
++	.probe	= rk_rng_probe,
++	.remove = rk_rng_remove,
++};
++
++module_platform_driver(rk_rng_driver);
++
++MODULE_DESCRIPTION("Rockchip True Random Number Generator driver");
++MODULE_AUTHOR("Lin Jinhan <[email protected]>, Aurelien Jarno <[email protected]>");
++MODULE_LICENSE("GPL v2");

target/linux/rockchip/patches-6.1/301-arm64-dts-rockchip-add-DT-entry-for-RNG-to-RK356x.patch

@@ -0,0 +1,56 @@
+From patchwork Sat Nov 12 14:10:59 2022
+Content-Type: text/plain; charset="utf-8"
+MIME-Version: 1.0
+Content-Transfer-Encoding: 7bit
+X-Patchwork-Submitter: Aurelien Jarno <[email protected]>
+X-Patchwork-Id: 13041221
+From: Aurelien Jarno <[email protected]>
+To: Olivia Mackall <[email protected]>,
+	Herbert Xu <[email protected]>,
+	Rob Herring <[email protected]>,
+	Krzysztof Kozlowski <[email protected]>,
+	Heiko Stuebner <[email protected]>,
+	Philipp Zabel <[email protected]>,
+	Lin Jinhan <[email protected]>
+Cc: [email protected] (open list:HARDWARE RANDOM NUMBER GENERATOR
+ CORE),
+	[email protected] (open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE
+ BINDINGS),
+	[email protected] (moderated list:ARM/Rockchip SoC
+ support),
+	[email protected] (open list:ARM/Rockchip SoC support),
+	[email protected] (open list),
+	Aurelien Jarno <[email protected]>
+Subject: [PATCH v1 3/3] arm64: dts: rockchip: add DT entry for RNG to RK356x
+Date: Sat, 12 Nov 2022 15:10:59 +0100
+Message-Id: <[email protected]>
+In-Reply-To: <[email protected]>
+References: <[email protected]>
+MIME-Version: 1.0
+List-Id: <linux-arm-kernel.lists.infradead.org>
+
+Enable the just added Rockchip RNG driver for RK356x SoCs.
+
+Signed-off-by: Aurelien Jarno <[email protected]>
+---
+ arch/arm64/boot/dts/rockchip/rk356x.dtsi | 9 +++++++++
+ 1 file changed, 9 insertions(+)
+
+--- a/arch/arm64/boot/dts/rockchip/rk356x.dtsi
++++ b/arch/arm64/boot/dts/rockchip/rk356x.dtsi
+@@ -1773,6 +1773,15 @@
+ 		};
+ 	};
+ 
++	rng: rng@fe388000 {
++		compatible = "rockchip,rk3568-rng";
++		reg = <0x0 0xfe388000 0x0 0x4000>;
++		clocks = <&cru CLK_TRNG_NS>, <&cru HCLK_TRNG_NS>;
++		clock-names = "trng_clk", "trng_hclk";
++		resets = <&cru SRST_TRNG_NS>;
++		reset-names = "reset";
++	};
++
+ 	pinctrl: pinctrl {
+ 		compatible = "rockchip,rk3568-pinctrl";
+ 		rockchip,grf = <&grf>;