mediatek: filogic: add specific layout for WR30U

Because this device enable NMBM by default, most users use custom
U-Boot with NMBM-Enabled in Chinese forums.

This layout is the same as the ubootmod layout but enabling NMBM.

Signed-off-by: Hank Moretti <[email protected]>

package/boot/uboot-envtools/files/mediatek_filogic

@@ -47,6 +47,7 @@ mercusys,mr90x-v1)
 netgear,wax220)
 	ubootenv_add_uci_config "/dev/mtd5" "0x0" "0x20000" "0x20000"
 	;;
+xiaomi,mi-router-wr30u-112m-nmbm|\
 xiaomi,mi-router-wr30u-stock|\
 xiaomi,redmi-router-ax6000-stock)
 	ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x10000" "0x20000"

target/linux/mediatek/dts/mt7981b-xiaomi-mi-router-wr30u-112m-nmbm.dts

@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+/dts-v1/;
+#include "mt7981b-xiaomi-mi-router-wr30u.dtsi"
+
+/ {
+	model = "Xiaomi Mi Router WR30U (112M UBI with NMBM-Enabled layout)";
+	compatible = "xiaomi,mi-router-wr30u-112m-nmbm", "mediatek,mt7981";
+};
+
+&spi_nand {
+	mediatek,nmbm;
+	mediatek,bmt-max-ratio = <1>;
+	mediatek,bmt-max-reserved-blocks = <64>;
+};
+
+&partitions {
+	partition@600000 {
+		label = "ubi";
+		reg = <0x600000 0x7000000>;
+	};
+};

target/linux/mediatek/filogic/base-files/etc/board.d/01_leds

@@ -20,6 +20,7 @@ netgear,wax220)
 	ucidef_set_led_netdev "wlan2g" "WLAN2G" "blue:wlan2g" "phy0-ap0"
 	ucidef_set_led_netdev "wlan5g" "WLAN5G" "blue:wlan5g" "phy1-ap0"
 	;;
+xiaomi,mi-router-wr30u-112m-nmbm|\
 xiaomi,mi-router-wr30u-stock|\
 xiaomi,mi-router-wr30u-ubootmod)
 	ucidef_set_led_netdev "wan" "wan" "blue:network" "wan"

target/linux/mediatek/filogic/base-files/etc/board.d/02_network

@@ -49,6 +49,7 @@ mediatek_setup_interfaces()
 	tplink,tl-xdr6086)
 		ucidef_set_interfaces_lan_wan "lan1 lan2" eth1
 		;;
+	xiaomi,mi-router-wr30u-112m-nmbm|\
 	xiaomi,mi-router-wr30u-stock|\
 	xiaomi,mi-router-wr30u-ubootmod|\
 	xiaomi,redmi-router-ax6000-stock|\
@@ -96,6 +97,7 @@ mediatek_setup_macs()
 		wan_mac=$(macaddr_add "$lan_mac" 1)
 		label_mac=$wan_mac
 		;;
+	xiaomi,mi-router-wr30u-112m-nmbm|\
 	xiaomi,mi-router-wr30u-stock|\
 	xiaomi,mi-router-wr30u-ubootmod|\
 	xiaomi,redmi-router-ax6000-stock|\

target/linux/mediatek/filogic/base-files/lib/upgrade/platform.sh

@@ -87,6 +87,7 @@ platform_do_upgrade() {
 	tplink,tl-xdr4288|\
 	tplink,tl-xdr6086|\
 	tplink,tl-xdr6088|\
+	xiaomi,mi-router-wr30u-112m-nmbm|\
 	xiaomi,mi-router-wr30u-ubootmod|\
 	xiaomi,redmi-router-ax6000-ubootmod)
 		CI_KERNPART="fit"

target/linux/mediatek/image/filogic.mk

@@ -365,6 +365,23 @@ define Device/tplink_tl-xdr6088
 endef
 TARGET_DEVICES += tplink_tl-xdr6088
 
+define Device/xiaomi_mi-router-wr30u-112m-nmbm
+  DEVICE_VENDOR := Xiaomi
+  DEVICE_MODEL := Mi Router WR30U (112M UBI with NMBM-Enabled layout)
+  DEVICE_DTS := mt7981b-xiaomi-mi-router-wr30u-112m-nmbm
+  DEVICE_DTS_DIR := ../dts
+  UBINIZE_OPTS := -E 5
+  BLOCKSIZE := 128k
+  PAGESIZE := 2048
+  DEVICE_PACKAGES := kmod-mt7981-firmware mt7981-wo-firmware
+ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),)
+  ARTIFACTS := initramfs-factory.ubi
+  ARTIFACT/initramfs-factory.ubi := append-image-stage initramfs-kernel.bin | ubinize-kernel
+endif
+  IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
+endef
+TARGET_DEVICES += xiaomi_mi-router-wr30u-112m-nmbm
+
 define Device/xiaomi_mi-router-wr30u-stock
   DEVICE_VENDOR := Xiaomi
   DEVICE_MODEL := Mi Router WR30U (stock layout)