ralink: add mt7620n support

Signed-off-by: John Crispin <[email protected]>

SVN-Revision: 38823

target/linux/ramips/Makefile

@@ -9,7 +9,7 @@ include $(TOPDIR)/rules.mk
 ARCH:=mipsel
 BOARD:=ramips
 BOARDNAME:=Ralink RT288x/RT3xxx
-SUBTARGETS:=rt305x rt3883 mt7620a rt288x
+SUBTARGETS:=rt305x mt7620a mt7620n rt3883 rt288x
 FEATURES:=squashfs gpio
 
 LINUX_VERSION:=3.10.18

target/linux/ramips/base-files/etc/diag.sh

@@ -120,9 +120,8 @@ get_status_led() {
 	whr-g300n)
 		status_led="whr-g300n:green:router"
 		;;
-	whr-300hp2)
-		status_led="buffalo:green:status"
-		;;
+	wmr300 | \
+	whr-300hp2 | \
 	whr-600d)
 		status_led="buffalo:green:status"
 		;;

target/linux/ramips/base-files/etc/uci-defaults/02_network

@@ -50,7 +50,8 @@ ramips_setup_interfaces()
 		;;
 
 	3g-6200nl | \
-	wl-330n)
+	wl-330n | \
+	wmr330)
 		ucidef_set_interface_lan "eth0.1"
 		;;
 

target/linux/ramips/base-files/lib/ramips.sh

@@ -208,6 +208,9 @@ ramips_board_detect() {
 	*"W502U")
 		name="w502u"
 		;;
+	*"WMR-300")
+		name="wmr300"
+		;;
 	*"WHR-300HP2")
 		name="whr-300hp2"
 		;;

target/linux/ramips/image/Makefile

@@ -633,6 +633,19 @@ endef
 endif
 
 
+#
+# MT7620N Profiles
+#
+
+Image/Build/Profile/WMR300=$(call BuildFirmware/Default8M/$(1),$(1),wmr-300,WMR300)
+
+ifeq ($(SUBTARGET),mt7620n)
+define Image/Build/Profile/Default
+	$(call Image/Build/Profile/WMR300,$(1))
+endef
+endif
+
+
 #
 # Generic Targets
 #

target/linux/ramips/mt7620n/config-3.10

@@ -0,0 +1,169 @@
+CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
+CONFIG_ARCH_DISCARD_MEMBLOCK=y
+CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
+CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_CEVT_R4K=y
+CONFIG_CLKDEV_LOOKUP=y
+# CONFIG_CLKEVT_RT3352 is not set
+CONFIG_CLONE_BACKWARDS=y
+CONFIG_CMDLINE="rootfstype=squashfs,jffs2"
+CONFIG_CMDLINE_BOOL=y
+# CONFIG_CMDLINE_OVERRIDE is not set
+CONFIG_CPU_GENERIC_DUMP_TLB=y
+CONFIG_CPU_HAS_PREFETCH=y
+CONFIG_CPU_HAS_SYNC=y
+CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_CPU_MIPS32=y
+# CONFIG_CPU_MIPS32_R1 is not set
+CONFIG_CPU_MIPS32_R2=y
+CONFIG_CPU_MIPSR2=y
+CONFIG_CPU_R4K_CACHE_TLB=y
+CONFIG_CPU_R4K_FPU=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
+CONFIG_CSRC_R4K=y
+CONFIG_DEBUG_PINCTRL=y
+CONFIG_DMA_NONCOHERENT=y
+# CONFIG_DTB_MT7620A_EVAL is not set
+CONFIG_DTB_RT_NONE=y
+CONFIG_DTC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_ATOMIC64=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_IO=y
+CONFIG_GENERIC_IRQ_SHOW=y
+CONFIG_GENERIC_PCI_IOMAP=y
+CONFIG_GENERIC_SMP_IDLE_THREAD=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_DEVRES=y
+CONFIG_GPIO_RALINK=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_HARDWARE_WATCHPOINTS=y
+CONFIG_HAS_DMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
+CONFIG_HAVE_ARCH_JUMP_LABEL=y
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_C_RECORDMCOUNT=y
+CONFIG_HAVE_DEBUG_KMEMLEAK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_HAVE_GENERIC_HARDIRQS=y
+CONFIG_HAVE_IDE=y
+CONFIG_HAVE_KVM=y
+CONFIG_HAVE_MACH_CLKDEV=y
+CONFIG_HAVE_MEMBLOCK=y
+CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
+CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
+CONFIG_HAVE_NET_DSA=y
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_HW_HAS_PCI=y
+CONFIG_HW_RANDOM=m
+CONFIG_HZ_PERIODIC=y
+CONFIG_IMAGE_CMDLINE_HACK=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_IRQCHIP=y
+CONFIG_IRQ_CPU=y
+CONFIG_IRQ_DOMAIN=y
+CONFIG_IRQ_FORCED_THREADING=y
+CONFIG_IRQ_WORK=y
+CONFIG_M25PXX_USE_FAST_READ=y
+CONFIG_MDIO_BOARDINFO=y
+# CONFIG_MII is not set
+CONFIG_MIPS=y
+# CONFIG_MIPS_HUGE_TLB_SUPPORT is not set
+CONFIG_MIPS_L1_CACHE_SHIFT=5
+# CONFIG_MIPS_MACHINE is not set
+CONFIG_MIPS_MT_DISABLED=y
+CONFIG_MODULES_USE_ELF_REL=y
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_M25P80=y
+CONFIG_MTD_OF_PARTS=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_OF=y
+CONFIG_MTD_SPLIT_FIRMWARE=y
+CONFIG_MTD_UIMAGE_SPLIT=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_NEED_PER_CPU_KM=y
+CONFIG_NET_RALINK=y
+CONFIG_NET_RALINK_GSW_MT7620=y
+CONFIG_NET_RALINK_MDIO=y
+CONFIG_NLS=m
+CONFIG_OF=y
+CONFIG_OF_ADDRESS=y
+CONFIG_OF_DEVICE=y
+CONFIG_OF_EARLY_FLATTREE=y
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_GPIO=y
+CONFIG_OF_IRQ=y
+CONFIG_OF_MDIO=y
+CONFIG_OF_MTD=y
+CONFIG_OF_NET=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+# CONFIG_PCI is not set
+CONFIG_PERF_USE_VMALLOC=y
+CONFIG_PHYLIB=y
+# CONFIG_PINCONF is not set
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_RT2880=y
+# CONFIG_PINCTRL_SINGLE is not set
+CONFIG_PINMUX=y
+# CONFIG_PREEMPT_RCU is not set
+CONFIG_RALINK=y
+CONFIG_RALINK_GDMA=y
+CONFIG_RALINK_USBPHY=y
+CONFIG_RALINK_WDT=y
+# CONFIG_RCU_STALL_COMMON is not set
+CONFIG_RESET_CONTROLLER=y
+# CONFIG_SAMSUNG_USB2PHY is not set
+# CONFIG_SAMSUNG_USB3PHY is not set
+# CONFIG_SAMSUNG_USBPHY is not set
+# CONFIG_SCSI_DMA is not set
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RT288X=y
+CONFIG_SERIAL_OF_PLATFORM=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+CONFIG_SOC_MT7620=y
+# CONFIG_SOC_RT288X is not set
+# CONFIG_SOC_RT305X is not set
+# CONFIG_SOC_RT3883 is not set
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+CONFIG_SPI_RT2880=y
+CONFIG_SWCONFIG=y
+CONFIG_SYS_HAS_CPU_MIPS32_R1=y
+CONFIG_SYS_HAS_CPU_MIPS32_R2=y
+CONFIG_SYS_HAS_EARLY_PRINTK=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
+CONFIG_TICK_CPU_ACCOUNTING=y
+CONFIG_UIDGID_CONVERTED=y
+CONFIG_USB=m
+# CONFIG_USB_ARCH_HAS_XHCI is not set
+CONFIG_USB_COMMON=m
+# CONFIG_USB_EHCI_HCD is not set
+CONFIG_USB_PHY=y
+CONFIG_USB_SUPPORT=y
+CONFIG_USE_OF=y
+CONFIG_WATCHDOG_CORE=y
+CONFIG_ZONE_DMA_FLAG=0

target/linux/ramips/mt7620n/profiles/00-default.mk

@@ -0,0 +1,18 @@
+#
+# Copyright (C) 2011 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+define Profile/Default
+	NAME:=Default Profile
+	PACKAGES:=\
+		kmod-usb-core kmod-usb-dwc2 \
+		kmod-ledtrig-usbdev
+endef
+
+define Profile/Default/Description
+	Default package set compatible with most boards.
+endef
+$(eval $(call Profile,Default))

target/linux/ramips/mt7620n/target.mk

@@ -0,0 +1,15 @@
+#
+# Copyright (C) 2013 OpenWrt.org
+#
+
+SUBTARGET:=mt7620n
+BOARDNAME:=MT7620n based boards
+ARCH_PACKAGES:=ramips_24kec
+FEATURES+=usb
+CPU_TYPE:=24kec
+CPU_SUBTYPE:=dsp
+
+define Target/Description
+	Build firmware images for Ralink MT7620n based boards.
+endef
+