ath10k-ct-firmware: Add support for QCA9886/QCA9888 firmware.

This firmware shoul have the same general feature set as the
rest of the 10.4 CT firmware (9984, 9980, etc).  Build-tested
only in LEDE, but firmware has been tested with ath10k-ct driver
on other OSs, so likely works just fine.

Signed-off-by: Ben Greear <[email protected]>

package/firmware/ath10k-firmware/Makefile

@@ -104,6 +104,13 @@ define Download/ath10k-firmware-qca9984-ct
 endef
 $(eval $(call Download,ath10k-firmware-qca9984-ct))
 
+QCA9888_FIRMWARE_FILE_CT:=firmware-5-ct-full-community-9.bin-lede.002
+define Download/ath10k-firmware-qca9888-ct
+  $(call Download/ct-firmware,QCA9888,ath10k-9888-10-4)
+  HASH:=f92e7d7968698af7c6f2d76b31b3645589e03839e15838010ce457c635e5aae6
+endef
+$(eval $(call Download,ath10k-firmware-qca9888-ct))
+
 define Package/ath10k-firmware-qca99x0
 $(Package/ath10k-firmware-default)
   TITLE:=ath10k firmware for QCA99x0 devices
@@ -158,6 +165,14 @@ This firmware conflicts with the standard 9984 firmware, so select only
 one.
 endef
 
+define Package/ath10k-firmware-qca9888-ct/description
+Alternative ath10k firmware for QCA9886 and QCA9888 from Candela Technologies.
+Enables IBSS and other features.  See:
+http://www.candelatech.com/ath10k-10.4.php
+This firmware conflicts with the standard 9886 and 9888 firmware, so select only
+one.
+endef
+
 define Package/ath10k-firmware-qca99x0/description
 Standard ath10k firmware for QCA99x0 from QCA
 This firmware conflicts with the CT 99x0 firmware, so select only
@@ -178,6 +193,13 @@ $(Package/ath10k-firmware-default)
   CATEGORY:=Firmware
 endef
 
+define Package/ath10k-firmware-qca9888-ct
+$(Package/ath10k-firmware-default)
+  TITLE:=ath10k CT 10.4.3 firmware for QCA9886 and QCA9888 devices
+  SECTION:=firmware
+  CATEGORY:=Firmware
+endef
+
 define Package/ath10k-firmware-qca9984
 $(Package/ath10k-firmware-default)
   TITLE:=ath10k firmware for QCA9984 devices
@@ -321,6 +343,19 @@ define Package/ath10k-firmware-qca9984-ct/install
 		$(1)/lib/firmware/ath10k/QCA9984/hw1.0/firmware-5.bin
 endef
 
+define Package/ath10k-firmware-qca9888-ct/install
+	$(INSTALL_DIR) $(1)/lib/firmware/ath10k/QCA9888/hw2.0
+	ln -s \
+		../../cal-pci-0000:01:00.0.bin \
+		$(1)/lib/firmware/ath10k/QCA9888/hw2.0/board.bin
+	$(INSTALL_DATA) \
+		$(PKG_BUILD_DIR)/QCA9888/hw2.0/board-2.bin \
+		$(1)/lib/firmware/ath10k/QCA9888/hw2.0/board-2.bin
+	$(INSTALL_DATA) \
+		$(DL_DIR)/$(call CT_FIRMWARE_FILE,QCA9888) \
+		$(1)/lib/firmware/ath10k/QCA9888/hw2.0/firmware-5.bin
+endef
+
 $(eval $(call BuildPackage,ath10k-firmware-qca9887))
 $(eval $(call BuildPackage,ath10k-firmware-qca988x))
 $(eval $(call BuildPackage,ath10k-firmware-qca99x0))
@@ -332,3 +367,4 @@ $(eval $(call BuildPackage,ath10k-firmware-qca9887-ct))
 $(eval $(call BuildPackage,ath10k-firmware-qca988x-ct))
 $(eval $(call BuildPackage,ath10k-firmware-qca99x0-ct))
 $(eval $(call BuildPackage,ath10k-firmware-qca9984-ct))
+$(eval $(call BuildPackage,ath10k-firmware-qca9888-ct))