mpc85xx: tl-wdr4900: use NVMEM for WAN

Now that the ports are defined in DTS, this is trivial to do.

Avoids userspace handling.

Signed-off-by: Rosen Penev <[email protected]>
Link: https://github.com/openwrt/openwrt/pull/16125
Signed-off-by: Robert Marko <[email protected]>

target/linux/mpc85xx/base-files/etc/board.d/02_network

@@ -28,7 +28,6 @@ ocedo,panda)
 	;;
 tplink,tl-wdr4900-v1)
 	ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" "wan"
-	ucidef_set_interface_macaddr "wan" "$(macaddr_add $(mtd_get_mac_binary u-boot 0x4fc00) 1)"
 	;;
 watchguard,firebox-t10)
 	ucidef_set_interfaces_lan_wan "eth1 eth2" "eth0"

target/linux/mpc85xx/files/arch/powerpc/boot/dts/tl-wdr4900-v1.dts

@@ -63,7 +63,9 @@
 							#size-cells = <1>;
 
 							macaddr_uboot_4fc00: macaddr@4fc00 {
+								compatible = "mac-base";
 								reg = <0x4fc00 0x6>;
+								#nvmem-cell-cells = <1>;
 							};
 						};
 					};
@@ -148,6 +150,10 @@
 						reg = <1>;
 						label = "wan";
 						phy-handle = <&phy_port1>;
+
+						nvmem-cells = <&macaddr_uboot_4fc00 1>;
+						nvmem-cell-names = "mac-address";
+
 					};
 
 					port@2 {
@@ -187,7 +193,7 @@
 
 		enet0: ethernet@b0000 {
 			phy-connection-type = "rgmii-id";
-			nvmem-cells = <&macaddr_uboot_4fc00>;
+			nvmem-cells = <&macaddr_uboot_4fc00 0>;
 			nvmem-cell-names = "mac-address";
 
 			fixed-link {