brcm2708-gpu-fw: add fw required for camera module

To be able to use the camera module, start_x=1 has to be set in
config.txt. This will cause the bootloader to load the GPU firmware that
contain the extra video codecs. Install these firmware files.

Signed-off-by: Stijn Tintel <[email protected]>

package/kernel/brcm2708-gpu-fw/Makefile

@@ -53,6 +53,14 @@ define Download/fixup_cd_dat
 endef
 $(eval $(call Download,fixup_cd_dat))
 
+define Download/fixup_x_dat
+  FILE:=$(RPI_FIRMWARE_FILE)-fixup_x.dat
+  URL:=$(RPI_FIRMWARE_URL)
+  HASH:=ec99af78227d9ffa2e46ab80a96aa762187467fe33876e4d8085377e7d0f76c2
+  URL_FILE:=fixup_x.dat
+endef
+$(eval $(call Download,fixup_x_dat))
+
 define Download/start_elf
   FILE:=$(RPI_FIRMWARE_FILE)-start.elf
   URL:=$(RPI_FIRMWARE_URL)
@@ -69,6 +77,14 @@ define Download/start_cd_elf
 endef
 $(eval $(call Download,start_cd_elf))
 
+define Download/start_x_elf
+  FILE:=$(RPI_FIRMWARE_FILE)-start_x.elf
+  URL:=$(RPI_FIRMWARE_URL)
+  HASH:=4fa98ee8eca7427aa013c1ad4a70d7b4cd01dcc08264307d1cb62f7c9ddfeed9
+  URL_FILE:=start_x.elf
+endef
+$(eval $(call Download,start_x_elf))
+
 define Package/brcm2708-gpu-fw
   SECTION:=boot
   CATEGORY:=Boot Loaders
@@ -88,8 +104,10 @@ define Build/Prepare
 	cp $(DL_DIR)/$(RPI_FIRMWARE_FILE)-bootcode.bin $(PKG_BUILD_DIR)/bootcode.bin
 	cp $(DL_DIR)/$(RPI_FIRMWARE_FILE)-fixup.dat $(PKG_BUILD_DIR)/fixup.dat
 	cp $(DL_DIR)/$(RPI_FIRMWARE_FILE)-fixup_cd.dat $(PKG_BUILD_DIR)/fixup_cd.dat
+	cp $(DL_DIR)/$(RPI_FIRMWARE_FILE)-fixup_x.dat $(PKG_BUILD_DIR)/fixup_x.dat
 	cp $(DL_DIR)/$(RPI_FIRMWARE_FILE)-start.elf $(PKG_BUILD_DIR)/start.elf
 	cp $(DL_DIR)/$(RPI_FIRMWARE_FILE)-start_cd.elf $(PKG_BUILD_DIR)/start_cd.elf
+	cp $(DL_DIR)/$(RPI_FIRMWARE_FILE)-start_x.elf $(PKG_BUILD_DIR)/start_x.elf
 endef
 
 define Build/Compile
@@ -105,8 +123,10 @@ define Build/InstallDev
 	$(CP) $(PKG_BUILD_DIR)/LICENCE.broadcom $(KERNEL_BUILD_DIR)
 	$(CP) $(PKG_BUILD_DIR)/start.elf $(KERNEL_BUILD_DIR)
 	$(CP) $(PKG_BUILD_DIR)/start_cd.elf $(KERNEL_BUILD_DIR)
+	$(CP) $(PKG_BUILD_DIR)/start_x.elf $(KERNEL_BUILD_DIR)
 	$(CP) $(PKG_BUILD_DIR)/fixup.dat $(KERNEL_BUILD_DIR)
 	$(CP) $(PKG_BUILD_DIR)/fixup_cd.dat $(KERNEL_BUILD_DIR)
+	$(CP) $(PKG_BUILD_DIR)/fixup_x.dat $(KERNEL_BUILD_DIR)
 endef
 
 $(eval $(call BuildPackage,brcm2708-gpu-fw))

target/linux/brcm2708/image/Makefile

@@ -29,8 +29,10 @@ define Build/boot-img
 	mcopy -i [email protected] $(KDIR)/LICENCE.broadcom ::
 	mcopy -i [email protected] $(KDIR)/start.elf ::
 	mcopy -i [email protected] $(KDIR)/start_cd.elf ::
+	mcopy -i [email protected] $(KDIR)/start_x.elf ::
 	mcopy -i [email protected] $(KDIR)/fixup.dat ::
 	mcopy -i [email protected] $(KDIR)/fixup_cd.dat ::
+	mcopy -i [email protected] $(KDIR)/fixup_x.dat ::
 	mcopy -i [email protected] cmdline.txt ::
 	mcopy -i [email protected] config.txt ::
 	mcopy -i [email protected] $(IMAGE_KERNEL) ::$(KERNEL_IMG)