rtl838x: dts: use macros for phy and switch definitions

It's quite more readable, saves some tedious copy&pasting, not so
error prone etc.

Signed-off-by: Petr Štetiar <[email protected]>

target/linux/rtl838x/dts/rtl8382_allnet_all-sg8208m.dts

@@ -103,46 +103,14 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		/* Internal phy */
-		phy8: ethernet-phy@8 {
-			reg = <8>;
-			compatible = "ethernet-phy-ieee802.3-c22";
-		};
-
-		phy9: ethernet-phy@9 {
-			reg = <9>;
-			compatible = "ethernet-phy-ieee802.3-c22";
-		};
-
-		phy10: ethernet-phy@10 {
-			reg = <10>;
-			compatible = "ethernet-phy-ieee802.3-c22";
-		};
-
-		phy11: ethernet-phy@11 {
-			reg = <11>;
-			compatible = "ethernet-phy-ieee802.3-c22";
-		};
-
-		phy12: ethernet-phy@12 {
-			reg = <12>;
-			compatible = "ethernet-phy-ieee802.3-c22";
-		};
-
-		phy13: ethernet-phy@13 {
-			reg = <13>;
-			compatible = "ethernet-phy-ieee802.3-c22";
-		};
-
-		phy14: ethernet-phy@14 {
-			reg = <14>;
-			compatible = "ethernet-phy-ieee802.3-c22";
-		};
-
-		phy15: ethernet-phy@15 {
-			reg = <15>;
-			compatible = "ethernet-phy-ieee802.3-c22";
-		};
+		INTERNAL_PHY(8)
+		INTERNAL_PHY(9)
+		INTERNAL_PHY(10)
+		INTERNAL_PHY(11)
+		INTERNAL_PHY(12)
+		INTERNAL_PHY(13)
+		INTERNAL_PHY(14)
+		INTERNAL_PHY(15)
 	};
 };
 
@@ -151,61 +119,14 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		port@0 {
-			reg = <8>;
-			label = "lan1";
-			phy-handle = <&phy8>;
-			phy-mode = "internal";
-		};
-
-		port@1 {
-			reg = <9>;
-			label = "lan2";
-			phy-handle = <&phy9>;
-			phy-mode = "internal";
-		};
-
-		port@2 {
-			reg = <10>;
-			label = "lan3";
-			phy-handle = <&phy10>;
-			phy-mode = "internal";
-		};
-
-		port@3 {
-			reg = <11>;
-			label = "lan4";
-			phy-handle = <&phy11>;
-			phy-mode = "internal";
-		};
-
-		port@4 {
-			reg = <12>;
-			label = "lan5";
-			phy-handle = <&phy12>;
-			phy-mode = "internal";
-		};
-
-		port@5 {
-			reg = <13>;
-			label = "lan6";
-			phy-handle = <&phy13>;
-			phy-mode = "internal";
-		};
-
-		port@6 {
-			reg = <14>;
-			label = "lan7";
-			phy-handle = <&phy14>;
-			phy-mode = "internal";
-		};
-
-		port@7 {
-			reg = <15>;
-			label = "lan8";
-			phy-handle = <&phy15>;
-			phy-mode = "internal";
-		};
+		SWITCH_PORT(8, 1, internal)
+		SWITCH_PORT(9, 2, internal)
+		SWITCH_PORT(10, 3, internal)
+		SWITCH_PORT(11, 4, internal)
+		SWITCH_PORT(12, 5, internal)
+		SWITCH_PORT(13, 6, internal)
+		SWITCH_PORT(14, 7, internal)
+		SWITCH_PORT(15, 8, internal)
 
 		port@28 {
 			ethernet = <&ethernet0>;

target/linux/rtl838x/dts/rtl8382_d-link_dgs-1210-10p.dts

@@ -99,8 +99,6 @@
 	};
 };
 
-
-
 &ethernet0 {
 	mdio: mdio-bus {
 		compatible = "realtek,rtl838x-mdio";
@@ -108,49 +106,16 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		/* Internal phy */
-		phy8: ethernet-phy@8 {
-			reg = <8>;
-			compatible = "ethernet-phy-ieee802.3-c22";
-		};
-		phy9: ethernet-phy@9 {
-			reg = <9>;
-			compatible = "ethernet-phy-ieee802.3-c22";
-		};
-		phy10: ethernet-phy@10 {
-			reg = <10>;
-			compatible = "ethernet-phy-ieee802.3-c22";
-		};
-		phy11: ethernet-phy@11 {
-			reg = <11>;
-			compatible = "ethernet-phy-ieee802.3-c22";
-		};
-		phy12: ethernet-phy@12 {
-			reg = <12>;
-			compatible = "ethernet-phy-ieee802.3-c22";
-		};
-		phy13: ethernet-phy@13 {
-			reg = <13>;
-			compatible = "ethernet-phy-ieee802.3-c22";
-		};
-		phy14: ethernet-phy@14 {
-			reg = <14>;
-			compatible = "ethernet-phy-ieee802.3-c22";
-		};
-		phy15: ethernet-phy@15 {
-			reg = <15>;
-			compatible = "ethernet-phy-ieee802.3-c22";
-		};
-		phy24: ethernet-phy@24 {
-			compatible = "ethernet-phy-ieee802.3-c22";
-			phy-is-integrated;
-			reg = <24>;
-		};
-		phy26: ethernet-phy@26 {
-			compatible = "ethernet-phy-ieee802.3-c22";
-			phy-is-integrated;
-			reg = <26>;
-		};
+		INTERNAL_PHY(8)
+		INTERNAL_PHY(9)
+		INTERNAL_PHY(10)
+		INTERNAL_PHY(11)
+		INTERNAL_PHY(12)
+		INTERNAL_PHY(13)
+		INTERNAL_PHY(14)
+		INTERNAL_PHY(15)
+		INTERNAL_PHY(24)
+		INTERNAL_PHY(26)
 	};
 };
 
@@ -159,67 +124,17 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		port@0 {
-			reg = <8>;
-			label = "lan1";
-			phy-handle = <&phy8>;
-			phy-mode = "internal";
-		};
-		port@1 {
-			reg = <9>;
-			label = "lan2";
-			phy-handle = <&phy9>;
-			phy-mode = "internal";
-		};
-		port@2 {
-			reg = <10>;
-			label = "lan3";
-			phy-handle = <&phy10>;
-			phy-mode = "internal";
-		};
-		port@3 {
-			reg = <11>;
-			label = "lan4";
-			phy-handle = <&phy11>;
-			phy-mode = "internal";
-		};
-		port@4 {
-			reg = <12>;
-			label = "lan5";
-			phy-handle = <&phy12>;
-			phy-mode = "internal";
-		};
-		port@5 {
-			reg = <13>;
-			label = "lan6";
-			phy-handle = <&phy13>;
-			phy-mode = "internal";
-		};
-		port@6 {
-			reg = <14>;
-			label = "lan7";
-			phy-handle = <&phy14>;
-			phy-mode = "internal";
-		};
-		port@7 {
-			reg = <15>;
-			label = "lan8";
-			phy-handle = <&phy15>;
-			phy-mode = "internal";
-		};
+		SWITCH_PORT(8, 1, internal)
+		SWITCH_PORT(9, 2, internal)
+		SWITCH_PORT(10, 3, internal)
+		SWITCH_PORT(11, 4, internal)
+		SWITCH_PORT(12, 5, internal)
+		SWITCH_PORT(13, 6, internal)
+		SWITCH_PORT(14, 7, internal)
+		SWITCH_PORT(15, 8, internal)
+		SWITCH_PORT(24, 9, internal)
+		SWITCH_PORT(26, 10, internal)
 
-		port@24 {
-			reg = <24>;
-			label = "lan9";
-			phy-mode = "internal";
-			phy-handle = <&phy24>;
-		};
-		port@26 {
-			reg = <26>;
-			label = "lan10";
-			phy-mode = "internal";
-			phy-handle = <&phy26>;
-		};
 		port@28 {
 			ethernet = <&ethernet0>;
 			reg = <28>;

target/linux/rtl838x/dts/rtl8382_d-link_dgs-1210-16.dts

@@ -14,107 +14,28 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		/* External phy RTL8218B */
-		phy0: ethernet-phy@0 {
-			reg = <0>;
-			compatible = "ethernet-phy-ieee802.3-c22";
-		};
-		phy1: ethernet-phy@1 {
-			reg = <1>;
-			compatible = "ethernet-phy-ieee802.3-c22";
-		};
-		phy2: ethernet-phy@2 {
-			reg = <2>;
-			compatible = "ethernet-phy-ieee802.3-c22";
-		};
-		phy3: ethernet-phy@3 {
-			reg = <3>;
-			compatible = "ethernet-phy-ieee802.3-c22";
-		};
-		phy4: ethernet-phy@4 {
-			reg = <4>;
-			compatible = "ethernet-phy-ieee802.3-c22";
-		};
-		phy5: ethernet-phy@5 {
-			reg = <5>;
-			compatible = "ethernet-phy-ieee802.3-c22";
-		};
-		phy6: ethernet-phy@6 {
-			reg = <6>;
-			compatible = "ethernet-phy-ieee802.3-c22";
-		};
-		phy7: ethernet-phy@7 {
-			reg = <7>;
-			compatible = "ethernet-phy-ieee802.3-c22";
-		};
+		EXTERNAL_PHY(0)
+		EXTERNAL_PHY(1)
+		EXTERNAL_PHY(2)
+		EXTERNAL_PHY(3)
+		EXTERNAL_PHY(4)
+		EXTERNAL_PHY(5)
+		EXTERNAL_PHY(6)
+		EXTERNAL_PHY(7)
 
-		/* Internal phy RTL8218B */
-		phy8: ethernet-phy@8 {
-			reg = <8>;
-			compatible = "ethernet-phy-ieee802.3-c22";
-			phy-is-integrated;
-		};
-		phy9: ethernet-phy@9 {
-			reg = <9>;
-			compatible = "ethernet-phy-ieee802.3-c22";
-			phy-is-integrated;
-		};
-		phy10: ethernet-phy@10 {
-			reg = <10>;
-			compatible = "ethernet-phy-ieee802.3-c22";
-			phy-is-integrated;
-		};
-		phy11: ethernet-phy@11 {
-			reg = <11>;
-			compatible = "ethernet-phy-ieee802.3-c22";
-			phy-is-integrated;
-		};
-		phy12: ethernet-phy@12 {
-			reg = <12>;
-			compatible = "ethernet-phy-ieee802.3-c22";
-			phy-is-integrated;
-		};
-		phy13: ethernet-phy@13 {
-			reg = <13>;
-			compatible = "ethernet-phy-ieee802.3-c22";
-			phy-is-integrated;
-		};
-		phy14: ethernet-phy@14 {
-			reg = <14>;
-			compatible = "ethernet-phy-ieee802.3-c22";
-			phy-is-integrated;
-		};
-		phy15: ethernet-phy@15 {
-			reg = <15>;
-			compatible = "ethernet-phy-ieee802.3-c22";
-			phy-is-integrated;
-		};
+		INTERNAL_PHY(8)
+		INTERNAL_PHY(9)
+		INTERNAL_PHY(10)
+		INTERNAL_PHY(11)
+		INTERNAL_PHY(12)
+		INTERNAL_PHY(13)
+		INTERNAL_PHY(14)
+		INTERNAL_PHY(15)
 
-		/* External phy: RTL8214FC */
-		phy24: ethernet-phy@24 {
-			compatible = "ethernet-phy-ieee802.3-c22";
-			sfp;
-			media = "fibre";
-			reg = <24>;
-		};
-		phy25: ethernet-phy@25 {
-			compatible = "ethernet-phy-ieee802.3-c22";
-			sfp;
-			media = "fibre";
-			reg = <25>;
-		};
-		phy26: ethernet-phy@26 {
-			compatible = "ethernet-phy-ieee802.3-c22";
-			sfp;
-			media = "fibre";
-			reg = <26>;
-		};
-		phy27: ethernet-phy@27 {
-			compatible = "ethernet-phy-ieee802.3-c22";
-			sfp;
-			media = "fibre";
-			reg = <27>;
-		};
+		EXTERNAL_SFP_PHY(24)
+		EXTERNAL_SFP_PHY(25)
+		EXTERNAL_SFP_PHY(26)
+		EXTERNAL_SFP_PHY(27)
 	};
 };
 
@@ -123,127 +44,29 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		port@0 {
-			reg = <0>;
-			label = "lan1";
-			phy-handle = <&phy0>;
-			phy-mode = "qsgmii";
-		};
-		port@1 {
-			reg = <1>;
-			label = "lan2";
-			phy-handle = <&phy1>;
-			phy-mode = "qsgmii";
-		};
-		port@2 {
-			reg = <2>;
-			label = "lan3";
-			phy-handle = <&phy2>;
-			phy-mode = "qsgmii";
-		};
-		port@3 {
-			reg = <3>;
-			label = "lan4";
-			phy-handle = <&phy3>;
-			phy-mode = "qsgmii";
-		};
-		port@4 {
-			reg = <4>;
-			label = "lan5";
-			phy-handle = <&phy4>;
-			phy-mode = "qsgmii";
-		};
-		port@5 {
-			reg = <5>;
-			label = "lan6";
-			phy-handle = <&phy5>;
-			phy-mode = "qsgmii";
-		};
-		port@6 {
-			reg = <6>;
-			label = "lan7";
-			phy-handle = <&phy6>;
-			phy-mode = "qsgmii";
-		};
-		port@7 {
-			reg = <7>;
-			label = "lan8";
-			phy-handle = <&phy7>;
-			phy-mode = "qsgmii";
-		};
-		port@8 {
-			reg = <8>;
-			label = "lan9";
-			phy-handle = <&phy8>;
-			phy-mode = "internal";
-		};
-		port@9 {
-			reg = <9>;
-			label = "lan10";
-			phy-handle = <&phy9>;
-			phy-mode = "internal";
-		};
-		port@10 {
-			reg = <10>;
-			label = "lan11";
-			phy-handle = <&phy10>;
-			phy-mode = "internal";
-		};
-		port@11 {
-			reg = <11>;
-			label = "lan12";
-			phy-handle = <&phy11>;
-			phy-mode = "internal";
-		};
-		port@12 {
-			reg = <12>;
-			label = "lan13";
-			phy-handle = <&phy12>;
-			phy-mode = "internal";
-		};
-		port@13 {
-			reg = <13>;
-			label = "lan14";
-			phy-handle = <&phy13>;
-			phy-mode = "internal";
-		};
-		port@14 {
-			reg = <14>;
-			label = "lan15";
-			phy-handle = <&phy14>;
-			phy-mode = "internal";
-		};
-		port@15 {
-			reg = <15>;
-			label = "lan16";
-			phy-handle = <&phy15>;
-			phy-mode = "internal";
-		};
+		SWITCH_PORT(0, 1, qsgmii)
+		SWITCH_PORT(1, 2, qsgmii)
+		SWITCH_PORT(2, 3, qsgmii)
+		SWITCH_PORT(3, 4, qsgmii)
+		SWITCH_PORT(4, 5, qsgmii)
+		SWITCH_PORT(5, 6, qsgmii)
+		SWITCH_PORT(6, 7, qsgmii)
+		SWITCH_PORT(7, 8, qsgmii)
+
+		SWITCH_PORT(8, 9, internal)
+		SWITCH_PORT(9, 10, internal)
+		SWITCH_PORT(10, 11, internal)
+		SWITCH_PORT(11, 12, internal)
+		SWITCH_PORT(12, 13, internal)
+		SWITCH_PORT(13, 14, internal)
+		SWITCH_PORT(14, 15, internal)
+		SWITCH_PORT(15, 16, internal)
+
+		SWITCH_PORT(24, 17, qsgmii)
+		SWITCH_PORT(25, 18, qsgmii)
+		SWITCH_PORT(26, 19, qsgmii)
+		SWITCH_PORT(27, 20, qsgmii)
 
-		port@24 {
-			reg = <24>;
-			label = "lan17";
-			phy-handle = <&phy24>;
-			phy-mode = "qsgmii";
-		};
-		port@25 {
-			reg = <25>;
-			label = "lan18";
-			phy-handle = <&phy25>;
-			phy-mode = "qsgmii";
-		};
-		port@26 {
-			reg = <26>;
-			label = "lan19";
-			phy-handle = <&phy26>;
-			phy-mode = "qsgmii";
-		};
-		port@27 {
-			reg = <27>;
-			label = "lan20";
-			phy-handle = <&phy27>;
-			phy-mode = "qsgmii";
-		};
 		port@28 {
 			ethernet = <&ethernet0>;
 			reg = <28>;

target/linux/rtl838x/dts/rtl8382_d-link_dgs-1210-28.dts

@@ -14,141 +14,37 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		/* External phy RTL8218B */
-		phy0: ethernet-phy@0 {
-			reg = <0>;
-			compatible = "ethernet-phy-ieee802.3-c22";
-		};
-		phy1: ethernet-phy@1 {
-			reg = <1>;
-			compatible = "ethernet-phy-ieee802.3-c22";
-		};
-		phy2: ethernet-phy@2 {
-			reg = <2>;
-			compatible = "ethernet-phy-ieee802.3-c22";
-		};
-		phy3: ethernet-phy@3 {
-			reg = <3>;
-			compatible = "ethernet-phy-ieee802.3-c22";
-		};
-		phy4: ethernet-phy@4 {
-			reg = <4>;
-			compatible = "ethernet-phy-ieee802.3-c22";
-		};
-		phy5: ethernet-phy@5 {
-			reg = <5>;
-			compatible = "ethernet-phy-ieee802.3-c22";
-		};
-		phy6: ethernet-phy@6 {
-			reg = <6>;
-			compatible = "ethernet-phy-ieee802.3-c22";
-		};
-		phy7: ethernet-phy@7 {
-			reg = <7>;
-			compatible = "ethernet-phy-ieee802.3-c22";
-		};
+		EXTERNAL_PHY(0)
+		EXTERNAL_PHY(1)
+		EXTERNAL_PHY(2)
+		EXTERNAL_PHY(3)
+		EXTERNAL_PHY(4)
+		EXTERNAL_PHY(5)
+		EXTERNAL_PHY(6)
+		EXTERNAL_PHY(7)
 
-		/* Internal phy RTL8218B */
-		phy8: ethernet-phy@8 {
-			reg = <8>;
-			compatible = "ethernet-phy-ieee802.3-c22";
-			phy-is-integrated;
-		};
-		phy9: ethernet-phy@9 {
-			reg = <9>;
-			compatible = "ethernet-phy-ieee802.3-c22";
-			phy-is-integrated;
-		};
-		phy10: ethernet-phy@10 {
-			reg = <10>;
-			compatible = "ethernet-phy-ieee802.3-c22";
-			phy-is-integrated;
-		};
-		phy11: ethernet-phy@11 {
-			reg = <11>;
-			compatible = "ethernet-phy-ieee802.3-c22";
-			phy-is-integrated;
-		};
-		phy12: ethernet-phy@12 {
-			reg = <12>;
-			compatible = "ethernet-phy-ieee802.3-c22";
-			phy-is-integrated;
-		};
-		phy13: ethernet-phy@13 {
-			reg = <13>;
-			compatible = "ethernet-phy-ieee802.3-c22";
-			phy-is-integrated;
-		};
-		phy14: ethernet-phy@14 {
-			reg = <14>;
-			compatible = "ethernet-phy-ieee802.3-c22";
-			phy-is-integrated;
-		};
-		phy15: ethernet-phy@15 {
-			reg = <15>;
-			compatible = "ethernet-phy-ieee802.3-c22";
-			phy-is-integrated;
-		};
+		INTERNAL_PHY(8)
+		INTERNAL_PHY(9)
+		INTERNAL_PHY(10)
+		INTERNAL_PHY(11)
+		INTERNAL_PHY(12)
+		INTERNAL_PHY(13)
+		INTERNAL_PHY(14)
+		INTERNAL_PHY(15)
 
-		/* External phy RTL8218B */
-		phy16: ethernet-phy@16 {
-			reg = <16>;
-			compatible = "ethernet-phy-ieee802.3-c22";
-		};
-		phy17: ethernet-phy@17 {
-			reg = <17>;
-			compatible = "ethernet-phy-ieee802.3-c22";
-		};
-		phy18: ethernet-phy@18 {
-			reg = <18>;
-			compatible = "ethernet-phy-ieee802.3-c22";
-		};
-		phy19: ethernet-phy@19 {
-			reg = <19>;
-			compatible = "ethernet-phy-ieee802.3-c22";
-		};
-		phy20: ethernet-phy@20 {
-			reg = <20>;
-			compatible = "ethernet-phy-ieee802.3-c22";
-		};
-		phy21: ethernet-phy@21 {
-			reg = <21>;
-			compatible = "ethernet-phy-ieee802.3-c22";
-		};
-		phy22: ethernet-phy@22 {
-			reg = <22>;
-			compatible = "ethernet-phy-ieee802.3-c22";
-		};
-		phy23: ethernet-phy@23 {
-			reg = <23>;
-			compatible = "ethernet-phy-ieee802.3-c22";
-		};
+		EXTERNAL_PHY(16)
+		EXTERNAL_PHY(17)
+		EXTERNAL_PHY(18)
+		EXTERNAL_PHY(19)
+		EXTERNAL_PHY(20)
+		EXTERNAL_PHY(21)
+		EXTERNAL_PHY(22)
+		EXTERNAL_PHY(23)
 
-		/* External phy: RTL8214FC */
-		phy24: ethernet-phy@24 {
-			compatible = "ethernet-phy-ieee802.3-c22";
-			sfp;
-			media = "fibre";
-			reg = <24>;
-		};
-		phy25: ethernet-phy@25 {
-			compatible = "ethernet-phy-ieee802.3-c22";
-			sfp;
-			media = "fibre";
-			reg = <25>;
-		};
-		phy26: ethernet-phy@26 {
-			compatible = "ethernet-phy-ieee802.3-c22";
-			sfp;
-			media = "fibre";
-			reg = <26>;
-		};
-		phy27: ethernet-phy@27 {
-			compatible = "ethernet-phy-ieee802.3-c22";
-			sfp;
-			media = "fibre";
-			reg = <27>;
-		};
+		EXTERNAL_SFP_PHY(24)
+		EXTERNAL_SFP_PHY(25)
+		EXTERNAL_SFP_PHY(26)
+		EXTERNAL_SFP_PHY(27)
 	};
 };
 
@@ -157,175 +53,38 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		port@0 {
-			reg = <0>;
-			label = "lan1";
-			phy-handle = <&phy0>;
-			phy-mode = "qsgmii";
-		};
-		port@1 {
-			reg = <1>;
-			label = "lan2";
-			phy-handle = <&phy1>;
-			phy-mode = "qsgmii";
-		};
-		port@2 {
-			reg = <2>;
-			label = "lan3";
-			phy-handle = <&phy2>;
-			phy-mode = "qsgmii";
-		};
-		port@3 {
-			reg = <3>;
-			label = "lan4";
-			phy-handle = <&phy3>;
-			phy-mode = "qsgmii";
-		};
-		port@4 {
-			reg = <4>;
-			label = "lan5";
-			phy-handle = <&phy4>;
-			phy-mode = "qsgmii";
-		};
-		port@5 {
-			reg = <5>;
-			label = "lan6";
-			phy-handle = <&phy5>;
-			phy-mode = "qsgmii";
-		};
-		port@6 {
-			reg = <6>;
-			label = "lan7";
-			phy-handle = <&phy6>;
-			phy-mode = "qsgmii";
-		};
-		port@7 {
-			reg = <7>;
-			label = "lan8";
-			phy-handle = <&phy7>;
-			phy-mode = "qsgmii";
-		};
-		port@8 {
-			reg = <8>;
-			label = "lan9";
-			phy-handle = <&phy8>;
-			phy-mode = "internal";
-		};
-		port@9 {
-			reg = <9>;
-			label = "lan10";
-			phy-handle = <&phy9>;
-			phy-mode = "internal";
-		};
-		port@10 {
-			reg = <10>;
-			label = "lan11";
-			phy-handle = <&phy10>;
-			phy-mode = "internal";
-		};
-		port@11 {
-			reg = <11>;
-			label = "lan12";
-			phy-handle = <&phy11>;
-			phy-mode = "internal";
-		};
-		port@12 {
-			reg = <12>;
-			label = "lan13";
-			phy-handle = <&phy12>;
-			phy-mode = "internal";
-		};
-		port@13 {
-			reg = <13>;
-			label = "lan14";
-			phy-handle = <&phy13>;
-			phy-mode = "internal";
-		};
-		port@14 {
-			reg = <14>;
-			label = "lan15";
-			phy-handle = <&phy14>;
-			phy-mode = "internal";
-		};
-		port@15 {
-			reg = <15>;
-			label = "lan16";
-			phy-handle = <&phy15>;
-			phy-mode = "internal";
-		};
-		port@16 {
-			reg = <16>;
-			label = "lan17";
-			phy-handle = <&phy16>;
-			phy-mode = "qsgmii";
-		};
-		port@17 {
-			reg = <17>;
-			label = "lan18";
-			phy-handle = <&phy17>;
-			phy-mode = "qsgmii";
-		};
-		port@18 {
-			reg = <18>;
-			label = "lan19";
-			phy-handle = <&phy18>;
-			phy-mode = "qsgmii";
-		};
-		port@19 {
-			reg = <19>;
-			label = "lan20";
-			phy-handle = <&phy19>;
-			phy-mode = "qsgmii";
-		};
-		port@20 {
-			reg = <20>;
-			label = "lan21";
-			phy-handle = <&phy20>;
-			phy-mode = "qsgmii";
-		};
-		port@21 {
-			reg = <21>;
-			label = "lan22";
-			phy-handle = <&phy21>;
-			phy-mode = "qsgmii";
-		};
-		port@22 {
-			reg = <22>;
-			label = "lan23";
-			phy-handle = <&phy22>;
-			phy-mode = "qsgmii";
-		};
-		port@23 {
-			reg = <23>;
-			label = "lan24";
-			phy-handle = <&phy23>;
-			phy-mode = "qsgmii";
-		};
+		SWITCH_PORT(0, 1, qsgmii)
+		SWITCH_PORT(1, 2, qsgmii)
+		SWITCH_PORT(2, 3, qsgmii)
+		SWITCH_PORT(3, 4, qsgmii)
+		SWITCH_PORT(4, 5, qsgmii)
+		SWITCH_PORT(5, 6, qsgmii)
+		SWITCH_PORT(6, 7, qsgmii)
+		SWITCH_PORT(7, 8, qsgmii)
+
+		SWITCH_PORT(8, 9, internal)
+		SWITCH_PORT(9, 10, internal)
+		SWITCH_PORT(10, 11, internal)
+		SWITCH_PORT(11, 12, internal)
+		SWITCH_PORT(12, 13, internal)
+		SWITCH_PORT(13, 14, internal)
+		SWITCH_PORT(14, 15, internal)
+		SWITCH_PORT(15, 16, internal)
+
+		SWITCH_PORT(16, 17, qsgmii)
+		SWITCH_PORT(17, 18, qsgmii)
+		SWITCH_PORT(18, 19, qsgmii)
+		SWITCH_PORT(19, 20, qsgmii)
+		SWITCH_PORT(20, 21, qsgmii)
+		SWITCH_PORT(21, 22, qsgmii)
+		SWITCH_PORT(22, 23, qsgmii)
+		SWITCH_PORT(23, 24, qsgmii)
+
+		SWITCH_PORT(24, 25, qsgmii)
+		SWITCH_PORT(25, 26, qsgmii)
+		SWITCH_PORT(26, 27, qsgmii)
+		SWITCH_PORT(27, 28, qsgmii)
 
-		port@24 {
-			reg = <24>;
-			label = "lan25";
-			phy-handle = <&phy24>;
-			phy-mode = "qsgmii";
-		};
-		port@25 {
-			reg = <25>;
-			label = "lan26";
-			phy-handle = <&phy25>;
-			phy-mode = "qsgmii";
-		};
-		port@26 {
-			reg = <26>;
-			label = "lan27";
-			phy-handle = <&phy26>;
-			phy-mode = "qsgmii";
-		};
-		port@27 {
-			reg = <27>;
-			label = "lan28";
-			phy-handle = <&phy27>;
-			phy-mode = "qsgmii";
-		};
 		port@28 {
 			ethernet = <&ethernet0>;
 			reg = <28>;

target/linux/rtl838x/dts/rtl838x.dtsi

@@ -2,6 +2,39 @@
 
 /dts-v1/;
 
+#define STRINGIZE(s) #s
+#define LAN_LABEL(p, s) STRINGIZE(p ## s)
+#define SWITCH_PORT_LABEL(n) LAN_LABEL(lan, n)
+
+#define INTERNAL_PHY(n) \
+	phy##n: ethernet-phy@##n { \
+		reg = <##n>; \
+		compatible = "ethernet-phy-ieee802.3-c22"; \
+		phy-is-integrated; \
+	};
+
+#define EXTERNAL_PHY(n) \
+	phy##n: ethernet-phy@##n { \
+		reg = <##n>; \
+		compatible = "ethernet-phy-ieee802.3-c22"; \
+	};
+
+#define EXTERNAL_SFP_PHY(n) \
+	phy##n: ethernet-phy@##n { \
+		compatible = "ethernet-phy-ieee802.3-c22"; \
+		sfp; \
+		media = "fibre"; \
+		reg = <##n>; \
+	};
+
+#define SWITCH_PORT(n, s, m) \
+	port@##n { \
+		reg = <##n>; \
+		label = SWITCH_PORT_LABEL(s) ; \
+		phy-handle = <&phy##n>; \
+		phy-mode = #m ; \
+	};
+
 / {
 	#address-cells = <1>;
 	#size-cells = <1>;