rockchip: merge bootscript

The bootscript for nanopi r2s/r4s only changes the serial address, so
make it auto detected in mmc bootscript rather than creating more
(redudant) files.

Signed-off-by: Tianling Shen <[email protected]>

target/linux/rockchip/image/armv8.mk

@@ -11,7 +11,7 @@ define Device/firefly_roc-rk3328-cc
   SOC := rk3328
   DEVICE_DTS := rockchip/rk3328-roc-cc
   UBOOT_DEVICE_NAME := roc-cc-rk3328
-  IMAGE/sysupgrade.img.gz := boot-common | boot-script nanopi-r2s | pine64-img | gzip | append-metadata
+  IMAGE/sysupgrade.img.gz := boot-common | boot-script | pine64-img | gzip | append-metadata
 endef
 TARGET_DEVICES += firefly_roc-rk3328-cc
 
@@ -20,7 +20,7 @@ define Device/friendlyarm_nanopi-r2s
   DEVICE_MODEL := NanoPi R2S
   SOC := rk3328
   UBOOT_DEVICE_NAME := nanopi-r2s-rk3328
-  IMAGE/sysupgrade.img.gz := boot-common | boot-script nanopi-r2s | pine64-img | gzip | append-metadata
+  IMAGE/sysupgrade.img.gz := boot-common | boot-script | pine64-img | gzip | append-metadata
   DEVICE_PACKAGES := kmod-usb-net-rtl8152
 endef
 TARGET_DEVICES += friendlyarm_nanopi-r2s
@@ -31,7 +31,7 @@ define Device/friendlyarm_nanopi-r4s
   DEVICE_VARIANT := 4GB LPDDR4
   SOC := rk3399
   UBOOT_DEVICE_NAME := nanopi-r4s-rk3399
-  IMAGE/sysupgrade.img.gz := boot-common | boot-script nanopi-r4s | pine64-img | gzip | append-metadata
+  IMAGE/sysupgrade.img.gz := boot-common | boot-script | pine64-img | gzip | append-metadata
   DEVICE_PACKAGES := kmod-r8169
 endef
 TARGET_DEVICES += friendlyarm_nanopi-r4s

target/linux/rockchip/image/mmc.bootscript

@@ -1,6 +1,14 @@
 part uuid mmc ${devnum}:2 uuid
 
-setenv bootargs "console=ttyS2,1500000 console=tty1 earlycon=uart8250,mmio32,0xff1a0000 root=PARTUUID=${uuid} rw rootwait"
+if test $stdout = 'serial@fe660000' ;
+then serial_addr=',0xfe660000';
+elif test $stdout = 'serial@ff130000' ;
+then serial_addr=',0xff130000';
+elif test $stdout = 'serial@ff1a0000' ;
+then serial_addr=',0xff1a0000';
+fi;
+
+setenv bootargs "console=ttyS2,1500000 console=tty1 earlycon=uart8250,mmio32${serial_addr} swiotlb=1 root=PARTUUID=${uuid} rw rootwait";
 
 load mmc ${devnum}:1 ${kernel_addr_r} kernel.img
 

target/linux/rockchip/image/nanopi-r2s.bootscript

@@ -1,7 +0,0 @@
-part uuid mmc ${devnum}:2 uuid
-
-setenv bootargs "console=ttyS2,1500000 earlycon=uart8250,mmio32,0xff130000 root=PARTUUID=${uuid} rw rootwait"
-
-load mmc ${devnum}:1 ${kernel_addr_r} kernel.img
-
-bootm ${kernel_addr_r}

target/linux/rockchip/image/nanopi-r4s.bootscript

@@ -1,7 +0,0 @@
-part uuid mmc ${devnum}:2 uuid
-
-setenv bootargs "console=ttyS2,1500000 earlycon=uart8250,mmio32,0xff1a0000 root=PARTUUID=${uuid} rw rootwait"
-
-load mmc ${devnum}:1 ${kernel_addr_r} kernel.img
-
-bootm ${kernel_addr_r}