ath79: rename TP-Link TL-WPA8630P v2 (EU) to v2.0 (EU)

Since we have a v2.1 (EU) with different partitioning now, rename
the v2.0 to make the difference visible to the user more directly.

Signed-off-by: Adrian Schmutzler <[email protected]>

target/linux/ath79/dts/qca9563_tplink_tl-wpa8630p-v2-eu.dts → target/linux/ath79/dts/qca9563_tplink_tl-wpa8630p-v2.0-eu.dts

@@ -3,8 +3,8 @@
 #include "qca9563_tplink_tl-wpa8630p-v2.dtsi"
 
 / {
-	compatible = "tplink,tl-wpa8630p-v2-eu", "qca,qca9563";
-	model = "TP-Link WPA8630P v2 (EU)";
+	compatible = "tplink,tl-wpa8630p-v2.0-eu", "qca,qca9563";
+	model = "TP-Link WPA8630P v2.0 (EU)";
 };
 
 &partitions {

target/linux/ath79/generic/base-files/etc/board.d/01_leds

@@ -323,8 +323,8 @@ tplink,tl-mr6400-v1)
 	ucidef_set_led_netdev "4g" "4G" "white:4g" "usb0"
 	;;
 tplink,tl-wpa8630-v1|\
-tplink,tl-wpa8630p-v2-eu|\
 tplink,tl-wpa8630p-v2-int|\
+tplink,tl-wpa8630p-v2.0-eu|\
 tplink,tl-wpa8630p-v2.1-eu)
 	ucidef_set_led_switch "lan" "LAN" "green:lan" "switch0" "0x3c"
 	;;

target/linux/ath79/generic/base-files/etc/board.d/02_network

@@ -323,8 +323,8 @@ ath79_setup_interfaces()
 			"0@eth0" "1:lan:1" "2:lan:3" "3:lan:2"
 		;;
 	tplink,tl-wpa8630-v1|\
-	tplink,tl-wpa8630p-v2-eu|\
 	tplink,tl-wpa8630p-v2-int|\
+	tplink,tl-wpa8630p-v2.0-eu|\
 	tplink,tl-wpa8630p-v2.1-eu)
 		# port 5 (internal) is the power-line port
 		ucidef_add_switch "switch0" \

target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata

@@ -197,8 +197,8 @@ case "$FIRMWARE" in
 			/lib/firmware/ath10k/QCA9888/hw2.0/board.bin
 		;;
 	tplink,eap225-wall-v2|\
-	tplink,tl-wpa8630p-v2-eu|\
 	tplink,tl-wpa8630p-v2-int|\
+	tplink,tl-wpa8630p-v2.0-eu|\
 	tplink,tl-wpa8630p-v2.1-eu)
 		caldata_extract "art" 0x5000 0x2f20
 		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary info 0x8) +1)

target/linux/ath79/image/generic-tp-link.mk

@@ -550,13 +550,6 @@ define Device/tplink_tl-wpa8630p-v2
   DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca9888-ct
 endef
 
-define Device/tplink_tl-wpa8630p-v2-eu
-  $(Device/tplink_tl-wpa8630p-v2)
-  DEVICE_VARIANT := v2 (EU)
-  TPLINK_BOARD_ID := TL-WPA8630P-V2-EU
-endef
-TARGET_DEVICES += tplink_tl-wpa8630p-v2-eu
-
 define Device/tplink_tl-wpa8630p-v2-int
   $(Device/tplink_tl-wpa8630p-v2)
   DEVICE_VARIANT := v2 (Int.)
@@ -564,6 +557,14 @@ define Device/tplink_tl-wpa8630p-v2-int
 endef
 TARGET_DEVICES += tplink_tl-wpa8630p-v2-int
 
+define Device/tplink_tl-wpa8630p-v2.0-eu
+  $(Device/tplink_tl-wpa8630p-v2)
+  DEVICE_VARIANT := v2.0 (EU)
+  TPLINK_BOARD_ID := TL-WPA8630P-V2.0-EU
+  SUPPORTED_DEVICES += tplink,tl-wpa8630p-v2-eu
+endef
+TARGET_DEVICES += tplink_tl-wpa8630p-v2.0-eu
+
 define Device/tplink_tl-wpa8630p-v2.1-eu
   $(Device/tplink_tl-wpa8630p-v2)
   DEVICE_VARIANT := v2.1 (EU)

tools/firmware-utils/src/tplink-safeloader.c

@@ -1443,7 +1443,7 @@ static struct device_info boards[] = {
 
 	/** Firmware layout for the TL-WPA8630P v2 (EU)*/
 	{
-		.id     = "TL-WPA8630P-V2-EU",
+		.id     = "TL-WPA8630P-V2.0-EU",
 		.vendor = "",
 		.support_list =
 			"SupportList:\n"