ramips: harmonize line breaks in image Makefiles

This harmonizes the line wrapping in image Makefile device
definitions, as those are frequently copy-pasted and are a common
subject of review comments. Having the treatment unifying should
reduce the cases where adjustment is necessary afterwards.

Harmonization is achieved by consistently (read "strictly")
applying certain rules:
- Never put more than 80 characters into one line
- Fill lines up (do not break after 40 chars because of ...)
- Use one tab for indent after wrapping by "\"
- Only break after pipe "|" for IMAGE variables

Signed-off-by: Adrian Schmutzler <[email protected]>

target/linux/ramips/image/mt7620.mk

@@ -40,7 +40,8 @@ define Device/alfa-network_r36m-e4g
   IMAGE_SIZE := 16064k
   DEVICE_VENDOR := ALFA Network
   DEVICE_MODEL := R36M-E4G
-  DEVICE_PACKAGES := kmod-i2c-ralink kmod-usb2 kmod-usb-ohci uboot-envtools uqmi
+  DEVICE_PACKAGES := kmod-i2c-ralink kmod-usb2 kmod-usb-ohci uboot-envtools \
+	uqmi
 endef
 TARGET_DEVICES += alfa-network_r36m-e4g
 
@@ -49,8 +50,8 @@ define Device/alfa-network_tube-e4g
   IMAGE_SIZE := 16064k
   DEVICE_VENDOR := ALFA Network
   DEVICE_MODEL := Tube-E4G
-  DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci uboot-envtools uqmi \
-	-iwinfo -kmod-rt2800-soc -wpad-basic
+  DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci uboot-envtools uqmi -iwinfo \
+	-kmod-rt2800-soc -wpad-basic
 endef
 TARGET_DEVICES += alfa-network_tube-e4g
 
@@ -89,7 +90,8 @@ define Device/asus_rt-ac51u
   IMAGE_SIZE := 16064k
   DEVICE_VENDOR := Asus
   DEVICE_MODEL := RT-AC51U
-  DEVICE_PACKAGES := kmod-mt76x0e kmod-usb2 kmod-usb-ohci kmod-usb-ledtrig-usbport
+  DEVICE_PACKAGES := kmod-mt76x0e kmod-usb2 kmod-usb-ohci \
+	kmod-usb-ledtrig-usbport
   SUPPORTED_DEVICES += rt-ac51u
 endef
 TARGET_DEVICES += asus_rt-ac51u
@@ -118,7 +120,8 @@ define Device/bdcom_wap2100-sk
   IMAGE_SIZE := 15808k
   DEVICE_VENDOR := BDCOM
   DEVICE_MODEL := WAP2100-SK (ZTE ZXECS EBG3130)
-  DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-mt76x2 kmod-mt76x0e kmod-sdhci-mt7620 kmod-usb-ledtrig-usbport
+  DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-mt76x2 kmod-mt76x0e \
+	kmod-sdhci-mt7620 kmod-usb-ledtrig-usbport
 endef
 TARGET_DEVICES += bdcom_wap2100-sk
 
@@ -306,7 +309,8 @@ define Device/edimax_br-6478ac-v2
   IMAGE/sysupgrade.bin := append-kernel | append-rootfs | \
 	edimax-header -s CSYS -m RN68 -f 0x70000 -S 0x01100000 | pad-rootfs | \
 	append-metadata | check-size $$$$(IMAGE_SIZE)
-  DEVICE_PACKAGES := kmod-mt76x2 kmod-usb2 kmod-usb-ohci kmod-usb-ledtrig-usbport
+  DEVICE_PACKAGES := kmod-mt76x2 kmod-usb2 kmod-usb-ohci \
+	kmod-usb-ledtrig-usbport
 endef
 TARGET_DEVICES += edimax_br-6478ac-v2
 
@@ -317,8 +321,8 @@ define Device/edimax_ew-7476rpc
   BLOCKSIZE := 4k
   IMAGE_SIZE := 7744k
   IMAGE/sysupgrade.bin := append-kernel | append-rootfs | \
-        edimax-header -s CSYS -m RN79 -f 0x70000 -S 0x01100000 | pad-rootfs | \
-        append-metadata | check-size $$$$(IMAGE_SIZE)
+	edimax-header -s CSYS -m RN79 -f 0x70000 -S 0x01100000 | pad-rootfs | \
+	append-metadata | check-size $$$$(IMAGE_SIZE)
   DEVICE_PACKAGES := kmod-mt76x2 kmod-phy-realtek
 endef
 TARGET_DEVICES += edimax_ew-7476rpc
@@ -330,8 +334,8 @@ define Device/edimax_ew-7478ac
   BLOCKSIZE := 4k
   IMAGE_SIZE := 7744k
   IMAGE/sysupgrade.bin := append-kernel | append-rootfs | \
-        edimax-header -s CSYS -m RN70 -f 0x70000 -S 0x01100000 | pad-rootfs | \
-        append-metadata | check-size $$$$(IMAGE_SIZE)
+	edimax-header -s CSYS -m RN70 -f 0x70000 -S 0x01100000 | pad-rootfs | \
+	append-metadata | check-size $$$$(IMAGE_SIZE)
   DEVICE_PACKAGES := kmod-mt76x2 kmod-phy-realtek
 endef
 TARGET_DEVICES += edimax_ew-7478ac
@@ -343,9 +347,10 @@ define Device/edimax_ew-7478apc
   BLOCKSIZE := 4k
   IMAGE_SIZE := 7744k
   IMAGE/sysupgrade.bin := append-kernel | append-rootfs | \
-        edimax-header -s CSYS -m RN75 -f 0x70000 -S 0x01100000 | pad-rootfs | \
-        append-metadata | check-size $$$$(IMAGE_SIZE)
-  DEVICE_PACKAGES := kmod-mt76x2 kmod-usb2 kmod-usb-ohci kmod-usb-ledtrig-usbport
+	edimax-header -s CSYS -m RN75 -f 0x70000 -S 0x01100000 | pad-rootfs | \
+	append-metadata | check-size $$$$(IMAGE_SIZE)
+  DEVICE_PACKAGES := kmod-mt76x2 kmod-usb2 kmod-usb-ohci \
+	kmod-usb-ledtrig-usbport
 endef
 TARGET_DEVICES += edimax_ew-7478apc
 
@@ -368,10 +373,11 @@ define Device/engenius_esr600
   IMAGE_SIZE := 15616k
   IMAGES += factory.dlf
   IMAGE/factory.dlf := $$(sysupgrade_bin) | check-size $$$$(IMAGE_SIZE) | \
-       senao-header -r 0x101 -p 0x57 -t 2
+	senao-header -r 0x101 -p 0x57 -t 2
   DEVICE_VENDOR := EnGenius
   DEVICE_MODEL := ESR600
-  DEVICE_PACKAGES += kmod-rt2800-pci kmod-usb-storage kmod-usb-ohci kmod-usb-ehci
+  DEVICE_PACKAGES += kmod-rt2800-pci kmod-usb-storage kmod-usb-ohci \
+	kmod-usb-ehci
 endef
 TARGET_DEVICES += engenius_esr600
 
@@ -382,9 +388,8 @@ define Device/fon_fon2601
   DEVICE_MODEL := FON2601
   DEVICE_PACKAGES := kmod-mt76x2 kmod-usb2 kmod-usb-ohci
   KERNEL_INITRAMFS := $$(KERNEL) | fonfxcimage
-  IMAGE/sysupgrade.bin := append-kernel | append-rootfs |\
-			fonfxcimage |\
-			pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE)
+  IMAGE/sysupgrade.bin := append-kernel | append-rootfs | fonfxcimage | \
+	pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE)
 endef
 TARGET_DEVICES += fon_fon2601
 
@@ -424,7 +429,7 @@ define Device/head-weblink_hdrm200
   DEVICE_VENDOR := Head Weblink
   DEVICE_MODEL := HDRM2000
   DEVICE_PACKAGES := kmod-mt76x2 kmod-usb2 kmod-usb-ohci kmod-sdhci-mt7620 \
-		     uqmi kmod-usb-serial kmod-usb-serial-option
+	uqmi kmod-usb-serial kmod-usb-serial-option
 endef
 TARGET_DEVICES += head-weblink_hdrm200
 
@@ -443,7 +448,8 @@ define Device/hiwifi_hc5761
   IMAGE_SIZE := 15872k
   DEVICE_VENDOR := HiWiFi
   DEVICE_MODEL := HC5761
-  DEVICE_PACKAGES := kmod-mt76x0e kmod-usb2 kmod-usb-ohci kmod-sdhci-mt7620 kmod-usb-ledtrig-usbport
+  DEVICE_PACKAGES := kmod-mt76x0e kmod-usb2 kmod-usb-ohci kmod-sdhci-mt7620 \
+	kmod-usb-ledtrig-usbport
   SUPPORTED_DEVICES += hc5761
 endef
 TARGET_DEVICES += hiwifi_hc5761
@@ -453,7 +459,8 @@ define Device/hiwifi_hc5861
   IMAGE_SIZE := 15872k
   DEVICE_VENDOR := HiWiFi
   DEVICE_MODEL := HC5861
-  DEVICE_PACKAGES := kmod-mt76x2 kmod-usb2 kmod-usb-ohci kmod-sdhci-mt7620 kmod-usb-ledtrig-usbport
+  DEVICE_PACKAGES := kmod-mt76x2 kmod-usb2 kmod-usb-ohci kmod-sdhci-mt7620 \
+	kmod-usb-ledtrig-usbport
   SUPPORTED_DEVICES += hc5861
 endef
 TARGET_DEVICES += hiwifi_hc5861
@@ -474,9 +481,8 @@ define Device/iodata_wn-ac1167gr
   DEVICE_MODEL := WN-AC1167GR
   IMAGE_SIZE := 6864k
   IMAGES += factory.bin
-  IMAGE/factory.bin := \
-    $$(sysupgrade_bin) | check-size $$$$(IMAGE_SIZE) | \
-    elx-header 01040016 8844A2D168B45A2D
+  IMAGE/factory.bin := $$(sysupgrade_bin) | check-size $$$$(IMAGE_SIZE) | \
+	elx-header 01040016 8844A2D168B45A2D
   DEVICE_PACKAGES := kmod-mt76x2
 endef
 TARGET_DEVICES += iodata_wn-ac1167gr
@@ -487,9 +493,8 @@ define Device/iodata_wn-ac733gr3
   DEVICE_MODEL := WN-AC733GR3
   IMAGE_SIZE := 6992k
   IMAGES += factory.bin
-  IMAGE/factory.bin := \
-    $$(sysupgrade_bin) | check-size $$$$(IMAGE_SIZE) | \
-    elx-header 01040006 8844A2D168B45A2D
+  IMAGE/factory.bin := $$(sysupgrade_bin) | check-size $$$$(IMAGE_SIZE) | \
+	elx-header 01040006 8844A2D168B45A2D
   DEVICE_PACKAGES := kmod-mt76x0e kmod-switch-rtl8367b
 endef
 TARGET_DEVICES += iodata_wn-ac733gr3
@@ -500,7 +505,8 @@ define Device/iptime_a104ns
   UIMAGE_NAME := a104ns
   DEVICE_VENDOR := ipTIME
   DEVICE_MODEL := A104ns
-  DEVICE_PACKAGES := kmod-mt76x0e kmod-usb2 kmod-usb-ohci kmod-usb-ledtrig-usbport
+  DEVICE_PACKAGES := kmod-mt76x0e kmod-usb2 kmod-usb-ohci \
+	kmod-usb-ledtrig-usbport
 endef
 TARGET_DEVICES += iptime_a104ns
 
@@ -511,7 +517,7 @@ define Device/kimax_u25awf-h1
   DEVICE_MODEL := U25AWF
   DEVICE_VARIANT := H1
   DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-usb-storage kmod-scsi-core \
-		     kmod-fs-ext4 kmod-fs-vfat block-mount
+	kmod-fs-ext4 kmod-fs-vfat block-mount
   SUPPORTED_DEVICES += u25awf-h1
 endef
 TARGET_DEVICES += kimax_u25awf-h1
@@ -522,7 +528,7 @@ define Device/kimax_u35wf
   DEVICE_VENDOR := Kimax
   DEVICE_MODEL := U35WF
   DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-usb-storage kmod-scsi-core \
-		     kmod-fs-ext4 kmod-fs-vfat block-mount
+	kmod-fs-ext4 kmod-fs-vfat block-mount
 endef
 TARGET_DEVICES += kimax_u35wf
 
@@ -608,7 +614,8 @@ define Device/netgear_ex2700
   BLOCKSIZE := 4k
   IMAGE_SIZE := 3776k
   IMAGES += factory.bin
-  KERNEL := $(KERNEL_DTB) | uImage lzma | pad-offset 64k 64 | append-uImage-fakehdr filesystem
+  KERNEL := $(KERNEL_DTB) | uImage lzma | pad-offset 64k 64 | \
+	append-uImage-fakehdr filesystem
   IMAGE/factory.bin := $$(sysupgrade_bin) | check-size $$$$(IMAGE_SIZE) | \
 	netgear-dni
   DEVICE_VENDOR := NETGEAR
@@ -623,7 +630,8 @@ define Device/netgear_ex3700
   BLOCKSIZE := 4k
   IMAGE_SIZE := 7744k
   IMAGES += factory.chk
-  IMAGE/factory.chk := $$(sysupgrade_bin) | check-size $$$$(IMAGE_SIZE) | netgear-chk
+  IMAGE/factory.chk := $$(sysupgrade_bin) | check-size $$$$(IMAGE_SIZE) | \
+	netgear-chk
   DEVICE_PACKAGES := kmod-mt76x2
   DEVICE_VENDOR := NETGEAR
   DEVICE_MODEL := EX3700/EX3800
@@ -637,7 +645,8 @@ define Device/netgear_ex6130
   BLOCKSIZE := 4k
   IMAGE_SIZE := 7744k
   IMAGES += factory.chk
-  IMAGE/factory.chk := $$(sysupgrade_bin) | check-size $$$$(IMAGE_SIZE) | netgear-chk
+  IMAGE/factory.chk := $$(sysupgrade_bin) | check-size $$$$(IMAGE_SIZE) | \
+	netgear-chk
   DEVICE_PACKAGES := kmod-mt76x2
   DEVICE_VENDOR := NETGEAR
   DEVICE_MODEL := EX6130
@@ -651,7 +660,8 @@ define Device/netgear_wn3000rp-v3
   NETGEAR_BOARD_ID := WN3000RPv3
   BLOCKSIZE := 4k
   IMAGES += factory.bin
-  KERNEL := $(KERNEL_DTB) | uImage lzma | pad-offset 64k 64 | append-uImage-fakehdr filesystem
+  KERNEL := $(KERNEL_DTB) | uImage lzma | pad-offset 64k 64 | \
+	append-uImage-fakehdr filesystem
   IMAGE/factory.bin := $$(sysupgrade_bin) | check-size $$$$(IMAGE_SIZE) | \
 	netgear-dni
   DEVICE_VENDOR := NETGEAR
@@ -745,9 +755,8 @@ define Device/planex_cs-qr10
   IMAGE_SIZE := 7872k
   DEVICE_VENDOR := Planex
   DEVICE_MODEL := CS-QR10
-  DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci \
-	kmod-sound-core kmod-sound-mt7620 \
-	kmod-i2c-ralink kmod-sdhci-mt7620
+  DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-sound-core \
+	kmod-sound-mt7620 kmod-i2c-ralink kmod-sdhci-mt7620
   SUPPORTED_DEVICES += cs-qr10
 endef
 TARGET_DEVICES += planex_cs-qr10
@@ -880,7 +889,8 @@ define Device/tplink_archer-c20-v1
   IMAGES += factory.bin
   DEVICE_MODEL := Archer C20
   DEVICE_VARIANT := v1
-  DEVICE_PACKAGES := kmod-mt76x0e kmod-usb2 kmod-usb-ohci kmod-usb-ledtrig-usbport
+  DEVICE_PACKAGES := kmod-mt76x0e kmod-usb2 kmod-usb-ohci \
+	kmod-usb-ledtrig-usbport
 endef
 TARGET_DEVICES += tplink_archer-c20-v1
 
@@ -894,7 +904,8 @@ define Device/tplink_archer-c2-v1
   IMAGES += factory.bin
   DEVICE_MODEL := Archer C2
   DEVICE_VARIANT := v1
-  DEVICE_PACKAGES := kmod-mt76x0e kmod-usb2 kmod-usb-ohci kmod-usb-ledtrig-usbport kmod-switch-rtl8366-smi kmod-switch-rtl8367b
+  DEVICE_PACKAGES := kmod-mt76x0e kmod-usb2 kmod-usb-ohci \
+	kmod-usb-ledtrig-usbport kmod-switch-rtl8366-smi kmod-switch-rtl8367b
 endef
 TARGET_DEVICES += tplink_archer-c2-v1
 
@@ -920,7 +931,8 @@ define Device/tplink_archer-mr200
   TPLINK_FLASHLAYOUT := 8MLmtk
   TPLINK_HWID := 0xd7500001
   TPLINK_HWREV := 0x4a
-  DEVICE_PACKAGES := kmod-mt76x0e kmod-usb2 kmod-usb-net kmod-usb-net-rndis kmod-usb-serial kmod-usb-serial-option adb-enablemodem
+  DEVICE_PACKAGES := kmod-mt76x0e kmod-usb2 kmod-usb-net kmod-usb-net-rndis \
+	kmod-usb-serial kmod-usb-serial-option adb-enablemodem
   DEVICE_MODEL := Archer MR200
   SUPPORTED_DEVICES += mr200
 endef
@@ -960,7 +972,8 @@ define Device/youku_yk1
   IMAGE_SIZE := 32448k
   DEVICE_VENDOR := YOUKU
   DEVICE_MODEL := YK1
-  DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-sdhci-mt7620 kmod-usb-ledtrig-usbport
+  DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-sdhci-mt7620 \
+	kmod-usb-ledtrig-usbport
   SUPPORTED_DEVICES += youku-yk1
 endef
 TARGET_DEVICES += youku_yk1
@@ -1064,7 +1077,7 @@ define Device/zbtlink_zbt-we826-e
   DEVICE_VENDOR := Zbtlink
   DEVICE_MODEL := ZBT-WE826-E
   DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-sdhci-mt7620 uqmi \
-		     kmod-usb-serial kmod-usb-serial-option
+	kmod-usb-serial kmod-usb-serial-option
 endef
 TARGET_DEVICES += zbtlink_zbt-we826-e
 
@@ -1095,8 +1108,8 @@ define Device/zyxel_keenetic-omni
   DEVICE_MODEL := Keenetic Omni
   DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-usb-ledtrig-usbport
   IMAGES += factory.bin
-  IMAGE/factory.bin := $$(IMAGE/sysupgrade.bin) | pad-to 64k | check-size $$$$(IMAGE_SIZE) | \
-	zyimage -d 4882 -v "ZyXEL Keenetic Omni"
+  IMAGE/factory.bin := $$(IMAGE/sysupgrade.bin) | pad-to 64k | \
+	check-size $$$$(IMAGE_SIZE) | zyimage -d 4882 -v "ZyXEL Keenetic Omni"
   SUPPORTED_DEVICES += kn_rc
 endef
 TARGET_DEVICES += zyxel_keenetic-omni
@@ -1108,7 +1121,8 @@ define Device/zyxel_keenetic-omni-ii
   DEVICE_MODEL := Keenetic Omni II
   DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-usb-ledtrig-usbport
   IMAGES += factory.bin
-  IMAGE/factory.bin := $$(IMAGE/sysupgrade.bin) | pad-to 64k | check-size $$$$(IMAGE_SIZE) | \
+  IMAGE/factory.bin := $$(IMAGE/sysupgrade.bin) | pad-to 64k | \
+	check-size $$$$(IMAGE_SIZE) | \
 	zyimage -d 2102034 -v "ZyXEL Keenetic Omni II"
   SUPPORTED_DEVICES += kn_rf
 endef
@@ -1119,10 +1133,11 @@ define Device/zyxel_keenetic-viva
   IMAGE_SIZE := 16064k
   DEVICE_VENDOR := ZyXEL
   DEVICE_MODEL := Keenetic Viva
-  DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-usb-ledtrig-usbport kmod-switch-rtl8366-smi kmod-switch-rtl8367b
+  DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-usb-ledtrig-usbport \
+	kmod-switch-rtl8366-smi kmod-switch-rtl8367b
   IMAGES += factory.bin
-  IMAGE/factory.bin := $$(sysupgrade_bin) | pad-to 64k | check-size $$$$(IMAGE_SIZE) | \
-	zyimage -d 8997 -v "ZyXEL Keenetic Viva"
+  IMAGE/factory.bin := $$(sysupgrade_bin) | pad-to 64k | \
+	check-size $$$$(IMAGE_SIZE) | zyimage -d 8997 -v "ZyXEL Keenetic Viva"
   SUPPORTED_DEVICES += kng_rc
 endef
 TARGET_DEVICES += zyxel_keenetic-viva

target/linux/ramips/image/mt7621.mk

@@ -89,9 +89,8 @@ define Device/afoundry_ew1200
   IMAGE_SIZE := 16064k
   DEVICE_VENDOR := AFOUNDRY
   DEVICE_MODEL := EW1200
-  DEVICE_PACKAGES := \
-	kmod-ata-core kmod-ata-ahci kmod-mt76x2 kmod-mt7603 kmod-usb3 \
-	kmod-usb-ledtrig-usbport wpad-basic
+  DEVICE_PACKAGES := kmod-ata-core kmod-ata-ahci kmod-mt76x2 kmod-mt7603 \
+	kmod-usb3 kmod-usb-ledtrig-usbport wpad-basic
   SUPPORTED_DEVICES += ew1200
 endef
 TARGET_DEVICES += afoundry_ew1200
@@ -111,8 +110,7 @@ define Device/asiarf_ap7621-001
   IMAGE_SIZE := 16000k
   DEVICE_VENDOR := AsiaRF
   DEVICE_MODEL := AP7621-001
-  DEVICE_PACKAGES := \
-	kmod-sdhci-mt7620 kmod-mt76x2 kmod-usb3
+  DEVICE_PACKAGES := kmod-sdhci-mt7620 kmod-mt76x2 kmod-usb3
 endef
 TARGET_DEVICES += asiarf_ap7621-001
 
@@ -121,8 +119,7 @@ define Device/asiarf_ap7621-nv1
   IMAGE_SIZE := 16000k
   DEVICE_VENDOR := AsiaRF
   DEVICE_MODEL := AP7621-NV1
-  DEVICE_PACKAGES := \
-	kmod-sdhci-mt7620 kmod-mt76x2 kmod-usb3
+  DEVICE_PACKAGES := kmod-sdhci-mt7620 kmod-mt76x2 kmod-usb3
 endef
 TARGET_DEVICES += asiarf_ap7621-nv1
 
@@ -131,7 +128,8 @@ define Device/asus_rt-ac57u
   DEVICE_VENDOR := ASUS
   DEVICE_MODEL := RT-AC57U
   IMAGE_SIZE := 16064k
-  DEVICE_PACKAGES := kmod-mt7603 kmod-mt76x2 kmod-usb3 kmod-usb-ledtrig-usbport wpad-basic
+  DEVICE_PACKAGES := kmod-mt7603 kmod-mt76x2 kmod-usb3 \
+	kmod-usb-ledtrig-usbport wpad-basic
 endef
 TARGET_DEVICES += asus_rt-ac57u
 
@@ -146,7 +144,8 @@ define Device/asus_rt-ac65p
   KERNEL_SIZE := 4096k
   IMAGES += factory.bin
   IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
-  IMAGE/factory.bin := append-kernel | pad-to $$(KERNEL_SIZE) | append-ubi | check-size $$$$(IMAGE_SIZE)
+  IMAGE/factory.bin := append-kernel | pad-to $$(KERNEL_SIZE) | append-ubi | \
+	check-size $$$$(IMAGE_SIZE)
   DEVICE_PACKAGES := kmod-usb3 kmod-mt7615e wpad-basic uboot-envtools
 endef
 TARGET_DEVICES += asus_rt-ac65p
@@ -162,7 +161,8 @@ define Device/asus_rt-ac85p
   KERNEL_SIZE := 4096k
   IMAGES += factory.bin
   IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
-  IMAGE/factory.bin := append-kernel | pad-to $$(KERNEL_SIZE) | append-ubi | check-size $$$$(IMAGE_SIZE)
+  IMAGE/factory.bin := append-kernel | pad-to $$(KERNEL_SIZE) | append-ubi | \
+	check-size $$$$(IMAGE_SIZE)
   DEVICE_PACKAGES := kmod-usb3 kmod-mt7615e wpad-basic uboot-envtools
 endef
 TARGET_DEVICES += asus_rt-ac85p
@@ -208,8 +208,8 @@ define Device/d-team_newifi-d2
   IMAGE_SIZE := 32448k
   DEVICE_VENDOR := Newifi
   DEVICE_MODEL := D2
-  DEVICE_PACKAGES := \
-	kmod-mt7603 kmod-mt76x2 kmod-usb3 kmod-usb-ledtrig-usbport wpad-basic
+  DEVICE_PACKAGES := kmod-mt7603 kmod-mt76x2 kmod-usb3 \
+	kmod-usb-ledtrig-usbport wpad-basic
 endef
 TARGET_DEVICES += d-team_newifi-d2
 
@@ -218,9 +218,8 @@ define Device/d-team_pbr-m1
   IMAGE_SIZE := 16064k
   DEVICE_VENDOR := PandoraBox
   DEVICE_MODEL := PBR-M1
-  DEVICE_PACKAGES := \
-	kmod-ata-core kmod-ata-ahci kmod-mt7603 kmod-mt76x2 kmod-sdhci-mt7620 \
-	kmod-usb3 kmod-usb-ledtrig-usbport wpad-basic
+  DEVICE_PACKAGES := kmod-ata-core kmod-ata-ahci kmod-mt7603 kmod-mt76x2 \
+	kmod-sdhci-mt7620 kmod-usb3 kmod-usb-ledtrig-usbport wpad-basic
   SUPPORTED_DEVICES += pbr-m1
 endef
 TARGET_DEVICES += d-team_pbr-m1
@@ -231,11 +230,9 @@ define Device/edimax_rg21s
   DEVICE_VENDOR := Edimax
   DEVICE_MODEL := Gemini AC2600 RG21S
   IMAGES += factory.bin
-  IMAGE/factory.bin := \
-    $$(sysupgrade_bin) | check-size $$$$(IMAGE_SIZE) | \
-    elx-header 02020038 8844A2D168B45A2D
-  DEVICE_PACKAGES := \
-        kmod-mt7615e wpad-basic
+  IMAGE/factory.bin := $$(sysupgrade_bin) | check-size $$$$(IMAGE_SIZE) | \
+	elx-header 02020038 8844A2D168B45A2D
+  DEVICE_PACKAGES := kmod-mt7615e wpad-basic
 endef
 TARGET_DEVICES += edimax_rg21s
 
@@ -245,8 +242,8 @@ define Device/elecom_wrc-1167ghbk2-s
   DEVICE_VENDOR := ELECOM
   DEVICE_MODEL := WRC-1167GHBK2-S
   IMAGES += factory.bin
-  IMAGE/factory.bin := $$(sysupgrade_bin) | check-size $$$$(IMAGE_SIZE) |\
-    elecom-wrc-factory WRC-1167GHBK2-S 0.00
+  IMAGE/factory.bin := $$(sysupgrade_bin) | check-size $$$$(IMAGE_SIZE) | \
+	elecom-wrc-factory WRC-1167GHBK2-S 0.00
   DEVICE_PACKAGES := kmod-mt7615e wpad-basic
 endef
 TARGET_DEVICES += elecom_wrc-1167ghbk2-s
@@ -257,8 +254,8 @@ define Device/elecom_wrc-1900gst
   DEVICE_VENDOR := ELECOM
   DEVICE_MODEL := WRC-1900GST
   IMAGES += factory.bin
-  IMAGE/factory.bin := $$(sysupgrade_bin) | check-size $$$$(IMAGE_SIZE) |\
-    elecom-gst-factory WRC-1900GST 0.00
+  IMAGE/factory.bin := $$(sysupgrade_bin) | check-size $$$$(IMAGE_SIZE) | \
+	elecom-gst-factory WRC-1900GST 0.00
 endef
 TARGET_DEVICES += elecom_wrc-1900gst
 
@@ -268,8 +265,8 @@ define Device/elecom_wrc-2533gst
   DEVICE_VENDOR := ELECOM
   DEVICE_MODEL := WRC-2533GST
   IMAGES += factory.bin
-  IMAGE/factory.bin := $$(sysupgrade_bin) | check-size $$$$(IMAGE_SIZE) |\
-    elecom-gst-factory WRC-2533GST 0.00
+  IMAGE/factory.bin := $$(sysupgrade_bin) | check-size $$$$(IMAGE_SIZE) | \
+	elecom-gst-factory WRC-2533GST 0.00
 endef
 TARGET_DEVICES += elecom_wrc-2533gst
 
@@ -288,8 +285,8 @@ define Device/gehua_ghl-r-001
   IMAGE_SIZE := 32448k
   DEVICE_VENDOR := GeHua
   DEVICE_MODEL := GHL-R-001
-  DEVICE_PACKAGES := \
-	kmod-mt7603 kmod-mt76x2 kmod-usb3 kmod-usb-ledtrig-usbport wpad-basic
+  DEVICE_PACKAGES := kmod-mt7603 kmod-mt76x2 kmod-usb3 \
+	kmod-usb-ledtrig-usbport wpad-basic
 endef
 TARGET_DEVICES += gehua_ghl-r-001
 
@@ -320,7 +317,8 @@ define Device/hiwifi_hc5962
   IMAGE_SIZE := 32768k
   IMAGES += factory.bin
   IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
-  IMAGE/factory.bin := append-kernel | pad-to $$(KERNEL_SIZE) | append-ubi | check-size $$$$(IMAGE_SIZE)
+  IMAGE/factory.bin := append-kernel | pad-to $$(KERNEL_SIZE) | append-ubi | \
+	check-size $$$$(IMAGE_SIZE)
   DEVICE_VENDOR := HiWiFi
   DEVICE_MODEL := HC5962
   DEVICE_PACKAGES := kmod-mt7603 kmod-mt76x2 kmod-usb3 wpad-basic
@@ -332,7 +330,7 @@ define Device/iodata_wn-ax1167gr
   MTK_SOC := mt7621
   IMAGE_SIZE := 15552k
   KERNEL_INITRAMFS := $$(KERNEL) | \
-    iodata-factory 7864320 4 0x1055 $(KDIR)/tmp/$$(KERNEL_INITRAMFS_PREFIX)-factory.bin
+	iodata-factory 7864320 4 0x1055 $(KDIR)/tmp/$$(KERNEL_INITRAMFS_PREFIX)-factory.bin
   DEVICE_VENDOR := I-O DATA
   DEVICE_MODEL := WN-AX1167GR
   DEVICE_PACKAGES := kmod-mt7603 kmod-mt76x2 wpad-basic
@@ -354,9 +352,8 @@ define Device/iodata_wnpr2600g
   DEVICE_MODEL := WNPR2600G
   IMAGE_SIZE := 13952k
   IMAGES += factory.bin
-  IMAGE/factory.bin := \
-    $$(sysupgrade_bin) | check-size $$$$(IMAGE_SIZE) | \
-    elx-header 0104003a 8844A2D168B45A2D
+  IMAGE/factory.bin := $$(sysupgrade_bin) | check-size $$$$(IMAGE_SIZE) | \
+	elx-header 0104003a 8844A2D168B45A2D
   DEVICE_PACKAGES := kmod-mt7615e wpad-basic
 endef
 TARGET_DEVICES += iodata_wnpr2600g
@@ -375,8 +372,8 @@ define Device/jcg_jhr-ac876m
   MTK_SOC := mt7621
   IMAGE_SIZE := 16064k
   IMAGES += factory.bin
-  IMAGE/factory.bin := \
-        $$(sysupgrade_bin) | check-size $$$$(IMAGE_SIZE) | jcg-header 89.1
+  IMAGE/factory.bin := $$(sysupgrade_bin) | check-size $$$$(IMAGE_SIZE) | \
+	jcg-header 89.1
   JCG_MAXSIZE := 16064k
   DEVICE_VENDOR := JCG
   DEVICE_MODEL := JHR-AC876M
@@ -389,8 +386,8 @@ define Device/lenovo_newifi-d1
   IMAGE_SIZE := 32448k
   DEVICE_VENDOR := Newifi
   DEVICE_MODEL := D1
-  DEVICE_PACKAGES := \
-	kmod-mt7603 kmod-mt76x2 kmod-usb3 kmod-sdhci-mt7620 kmod-usb-ledtrig-usbport wpad-basic
+  DEVICE_PACKAGES := kmod-mt7603 kmod-mt76x2 kmod-usb3 kmod-sdhci-mt7620 \
+	kmod-usb-ledtrig-usbport wpad-basic
   SUPPORTED_DEVICES += newifi-d1
 endef
 TARGET_DEVICES += lenovo_newifi-d1
@@ -433,8 +430,9 @@ define Device/MikroTik
   LOADER_TYPE := elf
   PLATFORM := mt7621
   KERNEL := $(KERNEL_DTB) | loader-kernel
-  IMAGE/sysupgrade.bin := append-kernel | kernel2minor -s 1024 | pad-to $$$$(BLOCKSIZE) | \
-	append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE)
+  IMAGE/sysupgrade.bin := append-kernel | kernel2minor -s 1024 | \
+	pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | append-metadata | \
+	check-size $$$$(IMAGE_SIZE)
 endef
 
 define Device/mikrotik_rb750gr3
@@ -462,9 +460,8 @@ define Device/mqmaker_witi
   IMAGE_SIZE := 16064k
   DEVICE_VENDOR := MQmaker
   DEVICE_MODEL := WiTi
-  DEVICE_PACKAGES := \
-	kmod-ata-core kmod-ata-ahci kmod-mt76x2 kmod-sdhci-mt7620 kmod-usb3 \
-	kmod-usb-ledtrig-usbport wpad-basic
+  DEVICE_PACKAGES := kmod-ata-core kmod-ata-ahci kmod-mt76x2 \
+	kmod-sdhci-mt7620 kmod-usb3 kmod-usb-ledtrig-usbport wpad-basic
   SUPPORTED_DEVICES += witi mqmaker,witi-256m mqmaker,witi-512m
 endef
 TARGET_DEVICES += mqmaker_witi
@@ -475,8 +472,8 @@ define Device/mtc_wr1201
   DEVICE_VENDOR := MTC
   DEVICE_MODEL := Wireless Router WR1201
   KERNEL_INITRAMFS := $(KERNEL_DTB) | wr1201-factory-header
-  DEVICE_PACKAGES := \
-	kmod-sdhci-mt7620 kmod-mt76x2 kmod-usb3 kmod-usb-ledtrig-usbport wpad-basic
+  DEVICE_PACKAGES := kmod-sdhci-mt7620 kmod-mt76x2 kmod-usb3 \
+	kmod-usb-ledtrig-usbport wpad-basic
 endef
 TARGET_DEVICES += mtc_wr1201
 
@@ -488,7 +485,8 @@ define Device/netgear_ex6150
   NETGEAR_BOARD_ID := U12H318T00_NETGEAR
   IMAGE_SIZE := 14848k
   IMAGES += factory.chk
-  IMAGE/factory.chk := $$(sysupgrade_bin) | check-size $$$$(IMAGE_SIZE) | netgear-chk
+  IMAGE/factory.chk := $$(sysupgrade_bin) | check-size $$$$(IMAGE_SIZE) | \
+	netgear-chk
 endef
 TARGET_DEVICES += netgear_ex6150
 
@@ -499,8 +497,8 @@ define Device/netgear_sercomm_nand
   KERNEL_SIZE := 4096k
   UBINIZE_OPTS := -E 5
   IMAGES += factory.img kernel.bin rootfs.bin
-  IMAGE/factory.img := pad-extra 2048k | append-kernel | pad-to 6144k | append-ubi | \
-	pad-to $$$$(BLOCKSIZE) | sercom-footer | pad-to 128 | \
+  IMAGE/factory.img := pad-extra 2048k | append-kernel | pad-to 6144k | \
+	append-ubi | pad-to $$$$(BLOCKSIZE) | sercom-footer | pad-to 128 | \
 	zip $$$$(SERCOMM_HWNAME).bin | sercom-seal
   IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
   IMAGE/kernel.bin := append-kernel
@@ -568,15 +566,18 @@ define Device/netgear_wndr3700-v5
   SERCOMM_HWVER := A001
   SERCOMM_SWVER := 0x1054
   IMAGES += factory.img
-  IMAGE/default := append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs
-  IMAGE/sysupgrade.bin := $$(IMAGE/default) | append-metadata | check-size $$$$(IMAGE_SIZE)
-  IMAGE/factory.img := pad-extra 320k | $$(IMAGE/default) | pad-to $$$$(BLOCKSIZE) | \
-	sercom-footer | pad-to 128 | zip WNDR3700v5.bin | sercom-seal
+  IMAGE/default := append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | \
+	pad-rootfs
+  IMAGE/sysupgrade.bin := $$(IMAGE/default) | append-metadata | \
+	check-size $$$$(IMAGE_SIZE)
+  IMAGE/factory.img := pad-extra 320k | $$(IMAGE/default) | \
+	pad-to $$$$(BLOCKSIZE) | sercom-footer | pad-to 128 | \
+	zip WNDR3700v5.bin | sercom-seal
   DEVICE_VENDOR := NETGEAR
   DEVICE_MODEL := WNDR3700
   DEVICE_VARIANT := v5
-  DEVICE_PACKAGES := \
-	kmod-mt7603 kmod-mt76x2 kmod-usb3 kmod-usb-ledtrig-usbport wpad-basic
+  DEVICE_PACKAGES := kmod-mt7603 kmod-mt76x2 kmod-usb3 \
+	kmod-usb-ledtrig-usbport wpad-basic
   SUPPORTED_DEVICES += wndr3700v5
 endef
 TARGET_DEVICES += netgear_wndr3700-v5
@@ -589,7 +590,8 @@ define Device/netis_wf-2881
   IMAGE_SIZE := 129280k
   KERNEL := $(KERNEL_DTB) | pad-offset $$(BLOCKSIZE) 64 | uImage lzma
   UBINIZE_OPTS := -E 5
-  IMAGE/sysupgrade.bin := append-kernel | append-ubi | append-metadata | check-size $$$$(IMAGE_SIZE)
+  IMAGE/sysupgrade.bin := append-kernel | append-ubi | append-metadata | \
+	check-size $$$$(IMAGE_SIZE)
   DEVICE_VENDOR := NETIS
   DEVICE_MODEL := WF-2881
   DEVICE_PACKAGES := kmod-mt76x2 kmod-usb3 kmod-usb-ledtrig-usbport wpad-basic
@@ -624,9 +626,8 @@ define Device/samknows_whitebox-v8
   IMAGE_SIZE := 16064k
   DEVICE_VENDOR := SamKnows
   DEVICE_MODEL := Whitebox 8
-  DEVICE_PACKAGES := \
-	kmod-mt7603 kmod-mt76x2 kmod-usb3 kmod-usb-ledtrig-usbport \
-	uboot-envtools wpad-basic
+  DEVICE_PACKAGES := kmod-mt7603 kmod-mt76x2 kmod-usb3 \
+	kmod-usb-ledtrig-usbport uboot-envtools wpad-basic
   SUPPORTED_DEVICES += sk-wb8
 endef
 TARGET_DEVICES += samknows_whitebox-v8
@@ -719,7 +720,8 @@ define Device/ubiquiti_edgerouterx
   IMAGE_SIZE := 256768k
   FILESYSTEMS := squashfs
   KERNEL_SIZE := 3145728
-  KERNEL_INITRAMFS := $$(KERNEL) | ubnt-erx-factory-image $(KDIR)/tmp/$$(KERNEL_INITRAMFS_PREFIX)-factory.tar
+  KERNEL_INITRAMFS := $$(KERNEL) | \
+	ubnt-erx-factory-image $(KDIR)/tmp/$$(KERNEL_INITRAMFS_PREFIX)-factory.tar
   IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
   DEVICE_VENDOR := Ubiquiti
   DEVICE_MODEL := EdgeRouter X
@@ -764,7 +766,8 @@ define Device/wevo_11acnas
   UIMAGE_NAME := 11AC-NAS-Router(0.0.0)
   DEVICE_VENDOR := WeVO
   DEVICE_MODEL := 11AC NAS Router
-  DEVICE_PACKAGES := kmod-mt7603 kmod-mt76x2 kmod-usb3 kmod-usb-ledtrig-usbport wpad-basic
+  DEVICE_PACKAGES := kmod-mt7603 kmod-mt76x2 kmod-usb3 \
+	kmod-usb-ledtrig-usbport wpad-basic
   SUPPORTED_DEVICES += 11acnas
 endef
 TARGET_DEVICES += wevo_11acnas
@@ -776,8 +779,8 @@ define Device/wevo_w2914ns-v2
   DEVICE_VENDOR := WeVO
   DEVICE_MODEL := W2914NS
   DEVICE_VARIANT := v2
-  DEVICE_PACKAGES := \
-	kmod-mt7603 kmod-mt76x2 kmod-usb3 kmod-usb-ledtrig-usbport wpad-basic
+  DEVICE_PACKAGES := kmod-mt7603 kmod-mt76x2 kmod-usb3 \
+	kmod-usb-ledtrig-usbport wpad-basic
   SUPPORTED_DEVICES += w2914nsv2
 endef
 TARGET_DEVICES += wevo_w2914ns-v2
@@ -797,9 +800,8 @@ define Device/xiaomi_mir3g
   DEVICE_MODEL := Mi Router 3G
   SUPPORTED_DEVICES += R3G
   SUPPORTED_DEVICES += mir3g
-  DEVICE_PACKAGES := \
-	kmod-mt7603 kmod-mt76x2 kmod-usb3 kmod-usb-ledtrig-usbport wpad-basic \
-	uboot-envtools
+  DEVICE_PACKAGES := kmod-mt7603 kmod-mt76x2 kmod-usb3 \
+	kmod-usb-ledtrig-usbport wpad-basic uboot-envtools
 endef
 TARGET_DEVICES += xiaomi_mir3g
 
@@ -827,10 +829,10 @@ define Device/xiaomi_mir3p
   DEVICE_MODEL := Mi Router 3 Pro
   IMAGES += factory.bin
   IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
-  IMAGE/factory.bin := append-kernel | pad-to $$(KERNEL_SIZE) | append-ubi | check-size $$$$(IMAGE_SIZE)
-  DEVICE_PACKAGES := \
-	kmod-mt7615e kmod-usb3 kmod-usb-ledtrig-usbport wpad-basic \
-	uboot-envtools
+  IMAGE/factory.bin := append-kernel | pad-to $$(KERNEL_SIZE) | append-ubi | \
+	check-size $$$$(IMAGE_SIZE)
+  DEVICE_PACKAGES := kmod-mt7615e kmod-usb3 kmod-usb-ledtrig-usbport \
+	wpad-basic uboot-envtools
 endef
 TARGET_DEVICES += xiaomi_mir3p
 
@@ -848,9 +850,8 @@ define Device/xzwifi_creativebox-v1
   IMAGE_SIZE := 32448k
   DEVICE_VENDOR := CreativeBox
   DEVICE_MODEL := v1
-  DEVICE_PACKAGES := \
-	kmod-ata-core kmod-ata-ahci kmod-mt7603 kmod-mt76x2 kmod-sdhci-mt7620 \
-	kmod-usb3
+  DEVICE_PACKAGES := kmod-ata-core kmod-ata-ahci kmod-mt7603 kmod-mt76x2 \
+	kmod-sdhci-mt7620 kmod-usb3
 endef
 TARGET_DEVICES += xzwifi_creativebox-v1
 
@@ -859,8 +860,8 @@ define Device/youhua_wr1200js
   IMAGE_SIZE := 16064k
   DEVICE_VENDOR := YouHua
   DEVICE_MODEL := WR1200JS
-  DEVICE_PACKAGES := \
-	kmod-mt7603 kmod-mt76x2 kmod-usb3 kmod-usb-ledtrig-usbport wpad-basic
+  DEVICE_PACKAGES := kmod-mt7603 kmod-mt76x2 kmod-usb3 \
+	kmod-usb-ledtrig-usbport wpad-basic
 endef
 TARGET_DEVICES += youhua_wr1200js
 
@@ -869,8 +870,8 @@ define Device/youku_yk-l2
   IMAGE_SIZE := 16064k
   DEVICE_VENDOR := Youku
   DEVICE_MODEL := YK-L2
-  DEVICE_PACKAGES := \
-	kmod-mt7603 kmod-mt76x2 kmod-usb3 kmod-usb-ledtrig-usbport wpad-basic
+  DEVICE_PACKAGES := kmod-mt7603 kmod-mt76x2 kmod-usb3 \
+	kmod-usb-ledtrig-usbport wpad-basic
 endef
 TARGET_DEVICES += youku_yk-l2
 
@@ -879,8 +880,8 @@ define Device/zbtlink_zbt-we1326
   IMAGE_SIZE := 16064k
   DEVICE_VENDOR := Zbtlink
   DEVICE_MODEL := ZBT-WE1326
-  DEVICE_PACKAGES := \
-	kmod-mt7603 kmod-mt76x2 kmod-usb3 kmod-sdhci-mt7620 wpad-basic
+  DEVICE_PACKAGES := kmod-mt7603 kmod-mt76x2 kmod-usb3 kmod-sdhci-mt7620 \
+	wpad-basic
   SUPPORTED_DEVICES += zbt-we1326
 endef
 TARGET_DEVICES += zbtlink_zbt-we1326
@@ -890,9 +891,8 @@ define Device/zbtlink_zbt-we3526
   IMAGE_SIZE := 16064k
   DEVICE_VENDOR := Zbtlink
   DEVICE_MODEL := ZBT-WE3526
-  DEVICE_PACKAGES := \
-	kmod-sdhci-mt7620 kmod-mt7603 kmod-mt76x2 \
-	kmod-usb3 kmod-usb-ledtrig-usbport wpad-basic
+  DEVICE_PACKAGES := kmod-sdhci-mt7620 kmod-mt7603 kmod-mt76x2 kmod-usb3 \
+	kmod-usb-ledtrig-usbport wpad-basic
 endef
 TARGET_DEVICES += zbtlink_zbt-we3526
 
@@ -901,9 +901,8 @@ define Device/zbtlink_zbt-wg2626
   IMAGE_SIZE := 16064k
   DEVICE_VENDOR := Zbtlink
   DEVICE_MODEL := ZBT-WG2626
-  DEVICE_PACKAGES := \
-	kmod-ata-core kmod-ata-ahci kmod-sdhci-mt7620 kmod-mt76x2 kmod-usb3 \
-	kmod-usb-ledtrig-usbport wpad-basic
+  DEVICE_PACKAGES := kmod-ata-core kmod-ata-ahci kmod-sdhci-mt7620 \
+	kmod-mt76x2 kmod-usb3 kmod-usb-ledtrig-usbport wpad-basic
   SUPPORTED_DEVICES += zbt-wg2626
 endef
 TARGET_DEVICES += zbtlink_zbt-wg2626
@@ -914,9 +913,8 @@ define Device/zbtlink_zbt-wg3526-16m
   DEVICE_VENDOR := Zbtlink
   DEVICE_MODEL := ZBT-WG3526
   DEVICE_VARIANT := 16M
-  DEVICE_PACKAGES := \
-	kmod-ata-core kmod-ata-ahci kmod-sdhci-mt7620 kmod-mt7603 kmod-mt76x2 \
-	kmod-usb3 kmod-usb-ledtrig-usbport wpad-basic
+  DEVICE_PACKAGES := kmod-ata-core kmod-ata-ahci kmod-sdhci-mt7620 \
+	kmod-mt7603 kmod-mt76x2 kmod-usb3 kmod-usb-ledtrig-usbport wpad-basic
   SUPPORTED_DEVICES += zbt-wg3526 zbt-wg3526-16M
 endef
 TARGET_DEVICES += zbtlink_zbt-wg3526-16m
@@ -927,9 +925,8 @@ define Device/zbtlink_zbt-wg3526-32m
   DEVICE_VENDOR := Zbtlink
   DEVICE_MODEL := ZBT-WG3526
   DEVICE_VARIANT := 32M
-  DEVICE_PACKAGES := \
-	kmod-ata-core kmod-ata-ahci kmod-sdhci-mt7620 kmod-mt7603 kmod-mt76x2 \
-	kmod-usb3 kmod-usb-ledtrig-usbport wpad-basic
+  DEVICE_PACKAGES := kmod-ata-core kmod-ata-ahci kmod-sdhci-mt7620 \
+	kmod-mt7603 kmod-mt76x2 kmod-usb3 kmod-usb-ledtrig-usbport wpad-basic
   SUPPORTED_DEVICES += ac1200pro zbt-wg3526-32M
 endef
 TARGET_DEVICES += zbtlink_zbt-wg3526-32m
@@ -939,6 +936,7 @@ define Device/zio_freezio
   IMAGE_SIZE := 16064k
   DEVICE_VENDOR := ZIO
   DEVICE_MODEL := FREEZIO
-  DEVICE_PACKAGES := kmod-mt7603 kmod-mt76x2 kmod-usb3 kmod-usb-ledtrig-usbport wpad-basic
+  DEVICE_PACKAGES := kmod-mt7603 kmod-mt76x2 kmod-usb3 \
+	kmod-usb-ledtrig-usbport wpad-basic
 endef
 TARGET_DEVICES += zio_freezio

target/linux/ramips/image/mt76x8.mk

@@ -19,11 +19,9 @@ define Device/buffalo_wcr-1166ds
   BUFFALO_TAG_MINOR := 9.99
   IMAGES += factory.bin
   IMAGE/sysupgrade.bin := trx | pad-rootfs | append-metadata
-  IMAGE/factory.bin := \
-	trx -M 0x746f435c | pad-rootfs | append-metadata | \
+  IMAGE/factory.bin := trx -M 0x746f435c | pad-rootfs | append-metadata | \
 	buffalo-enc WCR-1166DS $$(BUFFALO_TAG_VERSION) -l | \
-	buffalo-tag-dhp WCR-1166DS JP JP | buffalo-enc-tag -l | \
-	buffalo-dhp-image
+	buffalo-tag-dhp WCR-1166DS JP JP | buffalo-enc-tag -l | buffalo-dhp-image
   DEVICE_VENDOR := Buffalo
   DEVICE_MODEL := WCR-1166DS
   DEVICE_PACKAGES := kmod-mt76x2
@@ -35,8 +33,8 @@ define Device/cudy_wr1000
   MTK_SOC := mt7628an
   IMAGE_SIZE := 7872k
   IMAGES += factory.bin
-  IMAGE/factory.bin := \
-        $$(sysupgrade_bin) | check-size $$$$(IMAGE_SIZE) | jcg-header 92.122
+  IMAGE/factory.bin := $$(sysupgrade_bin) | check-size $$$$(IMAGE_SIZE) | \
+	jcg-header 92.122
   JCG_MAXSIZE := 7872k
   DEVICE_VENDOR := Cudy
   DEVICE_MODEL := WR1000
@@ -184,10 +182,13 @@ define Device/netgear_r6120
   SERCOMM_HWVER := A001
   SERCOMM_SWVER := 0x0040
   IMAGES += factory.img
-  IMAGE/default := append-kernel | pad-to $$$$(BLOCKSIZE)| append-rootfs | pad-rootfs
-  IMAGE/sysupgrade.bin := $$(IMAGE/default) | append-metadata | check-size $$$$(IMAGE_SIZE)
-  IMAGE/factory.img := pad-extra 576k | $$(IMAGE/default) | pad-to $$$$(BLOCKSIZE) | \
-	sercom-footer | pad-to 128 | zip R6120.bin | sercom-seal
+  IMAGE/default := append-kernel | pad-to $$$$(BLOCKSIZE)| append-rootfs | \
+	pad-rootfs
+  IMAGE/sysupgrade.bin := $$(IMAGE/default) | append-metadata | \
+	check-size $$$$(IMAGE_SIZE)
+  IMAGE/factory.img := pad-extra 576k | $$(IMAGE/default) | \
+	pad-to $$$$(BLOCKSIZE) | sercom-footer | pad-to 128 | zip R6120.bin | \
+	sercom-seal
 endef
 TARGET_DEVICES += netgear_r6120
 
@@ -263,7 +264,8 @@ define Device/tplink
   IMAGE/sysupgrade.bin := tplink-v2-image -s -e | append-metadata | \
 	check-size $$$$(IMAGE_SIZE)
 endef
-DEVICE_VARS += TPLINK_FLASHLAYOUT TPLINK_HWID TPLINK_HWREV TPLINK_HWREVADD TPLINK_HVERSION
+DEVICE_VARS += TPLINK_FLASHLAYOUT TPLINK_HWID TPLINK_HWREV TPLINK_HWREVADD
+DEVICE_VARS += TPLINK_HVERSION
 
 define Device/tplink_archer-c20-v4
   $(Device/tplink)
@@ -450,7 +452,8 @@ define Device/tplink_tl-wr902ac-v3
   TPLINK_HWREV := 0x89
   TPLINK_HWREVADD := 0x1
   TPLINK_HVERSION := 3
-  DEVICE_PACKAGES := kmod-mt76x0e kmod-usb2 kmod-usb-ohci kmod-usb-ledtrig-usbport
+  DEVICE_PACKAGES := kmod-mt76x0e kmod-usb2 kmod-usb-ohci \
+	kmod-usb-ledtrig-usbport
 endef
 TARGET_DEVICES += tplink_tl-wr902ac-v3
 
@@ -471,7 +474,7 @@ define Device/vocore_vocore2
   DEVICE_VENDOR := VoCore
   DEVICE_MODEL := VoCore2
   DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-usb-ledtrig-usbport \
-    kmod-sdhci-mt7620
+	kmod-sdhci-mt7620
   SUPPORTED_DEVICES += vocore2
 endef
 TARGET_DEVICES += vocore_vocore2
@@ -482,7 +485,7 @@ define Device/vocore_vocore2-lite
   DEVICE_VENDOR := VoCore
   DEVICE_MODEL := VoCore2-Lite
   DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-usb-ledtrig-usbport \
-    kmod-sdhci-mt7620
+	kmod-sdhci-mt7620
   SUPPORTED_DEVICES += vocore2lite
 endef
 TARGET_DEVICES += vocore_vocore2-lite
@@ -589,7 +592,8 @@ define Device/zyxel_keenetic-extra-ii
   BLOCKSIZE := 64k
   DEVICE_VENDOR := ZyXEL
   DEVICE_MODEL := Keenetic Extra II
-  DEVICE_PACKAGES := kmod-mt76x2 kmod-usb2 kmod-usb-ohci kmod-usb-ledtrig-usbport
+  DEVICE_PACKAGES := kmod-mt76x2 kmod-usb2 kmod-usb-ohci \
+	kmod-usb-ledtrig-usbport
   IMAGES += factory.bin
   IMAGE/factory.bin := $$(sysupgrade_bin) | pad-to $$$$(BLOCKSIZE) | \
 	check-size $$$$(IMAGE_SIZE) | zyimage -d 6162 -v "ZyXEL Keenetic Extra II"

target/linux/ramips/image/rt288x.mk

@@ -53,7 +53,7 @@ define Device/belkin_f5d8235-v1
   DEVICE_MODEL := F5D8235
   DEVICE_VARIANT := V1
   DEVICE_PACKAGES := kmod-switch-rtl8366s kmod-usb-ohci \
-    kmod-usb-ohci-pci kmod-usb2 kmod-usb2-pci kmod-usb-ledtrig-usbport
+	kmod-usb-ohci-pci kmod-usb2 kmod-usb2-pci kmod-usb-ledtrig-usbport
   SUPPORTED_DEVICES += f5d8235-v1
 endef
 TARGET_DEVICES += belkin_f5d8235-v1
@@ -90,10 +90,8 @@ define Device/dlink_dap-1522-a1
   DEVICE_PACKAGES := kmod-switch-rtl8366s
   KERNEL := $(KERNEL_DTB)
   IMAGES += factory.bin
-  IMAGE/factory.bin := \
-	append-kernel | pad-offset $$$$(BLOCKSIZE) 96 | \
-	append-rootfs | pad-rootfs -x 96 | \
-	wrg-header wapnd01_dlink_dap1522 | \
+  IMAGE/factory.bin := append-kernel | pad-offset $$$$(BLOCKSIZE) 96 | \
+	append-rootfs | pad-rootfs -x 96 | wrg-header wapnd01_dlink_dap1522 | \
 	check-size $$$$(IMAGE_SIZE)
 endef
 TARGET_DEVICES += dlink_dap-1522-a1

target/linux/ramips/image/rt305x.mk

@@ -111,7 +111,7 @@ define Device/allnet_all5002
   DEVICE_VENDOR := Allnet
   DEVICE_MODEL := ALL5002
   DEVICE_PACKAGES := kmod-usb-ohci kmod-usb2 kmod-usb-ledtrig-usbport \
-          kmod-i2c-core kmod-i2c-gpio kmod-hwmon-lm92 kmod-gpio-pcf857x
+	kmod-i2c-core kmod-i2c-gpio kmod-hwmon-lm92 kmod-gpio-pcf857x
   SUPPORTED_DEVICES += all5002
 endef
 TARGET_DEVICES += allnet_all5002
@@ -122,7 +122,7 @@ define Device/allnet_all5003
   DEVICE_VENDOR := Allnet
   DEVICE_MODEL := ALL5003
   DEVICE_PACKAGES := kmod-usb-ohci kmod-usb2 kmod-usb-ledtrig-usbport \
-          kmod-i2c-core kmod-i2c-gpio kmod-hwmon-lm92 kmod-gpio-pcf857x
+	kmod-i2c-core kmod-i2c-gpio kmod-hwmon-lm92 kmod-gpio-pcf857x
   SUPPORTED_DEVICES += all5003
 endef
 TARGET_DEVICES += allnet_all5003
@@ -153,7 +153,8 @@ define Device/arcwireless_freestation5
   IMAGE_SIZE := 7872k
   DEVICE_VENDOR := ARC Wireless
   DEVICE_MODEL := FreeStation
-  DEVICE_PACKAGES := kmod-usb-dwc2 kmod-rt2500-usb kmod-rt2800-usb kmod-rt2x00-usb
+  DEVICE_PACKAGES := kmod-usb-dwc2 kmod-rt2500-usb kmod-rt2800-usb \
+	kmod-rt2x00-usb
   SUPPORTED_DEVICES += freestation5
 endef
 TARGET_DEVICES += arcwireless_freestation5
@@ -183,8 +184,7 @@ define Device/asiarf_awm002-evb-4m
   DEVICE_VENDOR := AsiaRF
   DEVICE_MODEL := AWM002-EVB
   DEVICE_VARIANT := 4M
-  DEVICE_PACKAGES := kmod-usb-ohci kmod-usb2 \
-		kmod-i2c-core kmod-i2c-gpio
+  DEVICE_PACKAGES := kmod-usb-ohci kmod-usb2 kmod-i2c-core kmod-i2c-gpio
   SUPPORTED_DEVICES += awm002-evb-4M
 endef
 TARGET_DEVICES += asiarf_awm002-evb-4m
@@ -195,8 +195,7 @@ define Device/asiarf_awm002-evb-8m
   DEVICE_VENDOR := AsiaRF
   DEVICE_MODEL := AWM002-EVB/AWM003-EVB
   DEVICE_VARIANT := 8M
-  DEVICE_PACKAGES := kmod-usb-ohci kmod-usb2 \
-		kmod-i2c-core kmod-i2c-gpio
+  DEVICE_PACKAGES := kmod-usb-ohci kmod-usb2 kmod-i2c-core kmod-i2c-gpio
   SUPPORTED_DEVICES += awm002-evb-8M
 endef
 TARGET_DEVICES += asiarf_awm002-evb-8m
@@ -302,8 +301,8 @@ define Device/buffalo_whr-g300n
   DEVICE_VENDOR := Buffalo
   DEVICE_MODEL := WHR-G300N
   IMAGES += tftp.bin
-  IMAGE/tftp.bin := $$(sysupgrade_bin) | \
-    check-size $$$$(IMAGE_SIZE) | buffalo-tftp-header
+  IMAGE/tftp.bin := $$(sysupgrade_bin) | check-size $$$$(IMAGE_SIZE) | \
+	buffalo-tftp-header
   SUPPORTED_DEVICES += whr-g300n
 endef
 TARGET_DEVICES += buffalo_whr-g300n
@@ -327,7 +326,8 @@ define Device/dlink_dcs-930
   IMAGE_SIZE := 3776k
   DEVICE_VENDOR := D-Link
   DEVICE_MODEL := DCS-930
-  DEVICE_PACKAGES := kmod-video-core kmod-video-uvc kmod-sound-core kmod-usb-audio kmod-usb-dwc2
+  DEVICE_PACKAGES := kmod-video-core kmod-video-uvc kmod-sound-core \
+	kmod-usb-audio kmod-usb-dwc2
   SUPPORTED_DEVICES += dcs-930
 endef
 TARGET_DEVICES += dlink_dcs-930
@@ -338,7 +338,8 @@ define Device/dlink_dcs-930l-b1
   DEVICE_VENDOR := D-Link
   DEVICE_MODEL := DCS-930L
   DEVICE_VARIANT := B1
-  DEVICE_PACKAGES := kmod-video-core kmod-video-uvc kmod-sound-core kmod-usb-audio kmod-usb-ohci kmod-usb2
+  DEVICE_PACKAGES := kmod-video-core kmod-video-uvc kmod-sound-core \
+	kmod-usb-audio kmod-usb-ohci kmod-usb2
   SUPPORTED_DEVICES += dcs-930l-b1
 endef
 TARGET_DEVICES += dlink_dcs-930l-b1
@@ -347,8 +348,8 @@ define Device/dlink_dir-300-b1
   MTK_SOC := rt3050
   IMAGE_SIZE := 3776k
   IMAGES += factory.bin
-  IMAGE/factory.bin := \
-	$$(sysupgrade_bin) | check-size $$$$(IMAGE_SIZE) | wrg-header wrgn23_dlwbr_dir300b
+  IMAGE/factory.bin := $$(sysupgrade_bin) | check-size $$$$(IMAGE_SIZE) | \
+	wrg-header wrgn23_dlwbr_dir300b
   DEVICE_VENDOR := D-Link
   DEVICE_MODEL := DIR-300
   DEVICE_VARIANT := B1
@@ -381,8 +382,8 @@ define Device/dlink_dir-600-b1
   MTK_SOC := rt3050
   IMAGE_SIZE := 3776k
   IMAGES += factory.bin
-  IMAGE/factory.bin := \
-	$$(sysupgrade_bin) | check-size $$$$(IMAGE_SIZE) | wrg-header wrgn23_dlwbr_dir600b
+  IMAGE/factory.bin := $$(sysupgrade_bin) | check-size $$$$(IMAGE_SIZE) | \
+	wrg-header wrgn23_dlwbr_dir600b
   DEVICE_VENDOR := D-Link
   DEVICE_MODEL := DIR-600
   DEVICE_VARIANT := B1/B2
@@ -409,8 +410,8 @@ define Device/dlink_dir-615-d
   MTK_SOC := rt3050
   IMAGE_SIZE := 3776k
   IMAGES += factory.bin
-  IMAGE/factory.bin := \
-	$$(sysupgrade_bin) | check-size $$$$(IMAGE_SIZE) | wrg-header wrgn23_dlwbr_dir615d
+  IMAGE/factory.bin := $$(sysupgrade_bin) | check-size $$$$(IMAGE_SIZE) | \
+	wrg-header wrgn23_dlwbr_dir615d
   DEVICE_VENDOR := D-Link
   DEVICE_MODEL := DIR-615
   DEVICE_VARIANT := D
@@ -423,8 +424,7 @@ define Device/dlink_dir-615-h1
   BLOCKSIZE := 4k
   IMAGES += factory.bin
   IMAGE_SIZE := 3776k
-  IMAGE/factory.bin := \
-	$$(sysupgrade_bin) | senao-header -r 0x218 -p 0x30 -t 3
+  IMAGE/factory.bin := $$(sysupgrade_bin) | senao-header -r 0x218 -p 0x30 -t 3
   DEVICE_VENDOR := D-Link
   DEVICE_MODEL := DIR-615
   DEVICE_VARIANT := H1
@@ -459,8 +459,7 @@ define Device/dlink_dwr-512-b
   DEVICE_MODEL := DWR-512
   DEVICE_VARIANT := B
   DEVICE_PACKAGES := jboot-tools kmod-usb2 kmod-spi-dev kmod-usb-serial \
-			kmod-usb-serial-option kmod-usb-net kmod-usb-net-cdc-ether \
-			comgt-ncm
+	kmod-usb-serial-option kmod-usb-net kmod-usb-net-cdc-ether comgt-ncm
   DLINK_ROM_ID := DLK6E2412001
   DLINK_FAMILY_MEMBER := 0x6E24
   DLINK_FIRMWARE_SIZE := 0x7E0000
@@ -569,8 +568,8 @@ define Device/hilink_hlk-rm04
   MTK_SOC := rt5350
   IMAGE_SIZE := 3776k
   IMAGES += factory.bin
-  IMAGE/factory.bin := \
-	$$(sysupgrade_bin) | check-size $$$$(IMAGE_SIZE) | hilink-header
+  IMAGE/factory.bin := $$(sysupgrade_bin) | check-size $$$$(IMAGE_SIZE) | \
+	hilink-header
   DEVICE_VENDOR := Hi-Link
   DEVICE_MODEL := HLK-RM04
   SUPPORTED_DEVICES += hlk-rm04
@@ -612,9 +611,8 @@ define Device/intenso_memory2move
   UIMAGE_NAME:= Linux Kernel Image
   DEVICE_VENDOR := Intenso
   DEVICE_MODEL := Memory 2 Move
-  DEVICE_PACKAGES := kmod-ledtrig-netdev kmod-ledtrig-timer \
-		kmod-usb2 kmod-usb-storage kmod-scsi-core \
-		kmod-fs-ext4 kmod-fs-vfat block-mount
+  DEVICE_PACKAGES := kmod-ledtrig-netdev kmod-ledtrig-timer kmod-usb2 \
+	kmod-usb-storage kmod-scsi-core kmod-fs-ext4 kmod-fs-vfat block-mount
   SUPPORTED_DEVICES += m2m
 endef
 TARGET_DEVICES += intenso_memory2move
@@ -623,8 +621,8 @@ define Device/jcg_jhr-n805r
   MTK_SOC := rt3050
   IMAGE_SIZE := 3776k
   IMAGES += factory.bin
-  IMAGE/factory.bin := \
-	$$(sysupgrade_bin) | check-size $$$$(IMAGE_SIZE) | jcg-header 29.24
+  IMAGE/factory.bin := $$(sysupgrade_bin) | check-size $$$$(IMAGE_SIZE) | \
+	jcg-header 29.24
   DEVICE_VENDOR := JCG
   DEVICE_MODEL := JHR-N805R
   SUPPORTED_DEVICES += jhr-n805r
@@ -635,8 +633,8 @@ define Device/jcg_jhr-n825r
   MTK_SOC := rt3052
   IMAGE_SIZE := 3776k
   IMAGES += factory.bin
-  IMAGE/factory.bin := \
-	$$(sysupgrade_bin) | check-size $$$$(IMAGE_SIZE) | jcg-header 23.24
+  IMAGE/factory.bin := $$(sysupgrade_bin) | check-size $$$$(IMAGE_SIZE) | \
+	jcg-header 23.24
   DEVICE_VENDOR := JCG
   DEVICE_MODEL := JHR-N825R
   SUPPORTED_DEVICES += jhr-n825r
@@ -647,8 +645,8 @@ define Device/jcg_jhr-n926r
   MTK_SOC := rt3052
   IMAGE_SIZE := 3776k
   IMAGES += factory.bin
-  IMAGE/factory.bin := \
-	$$(sysupgrade_bin) | check-size $$$$(IMAGE_SIZE) | jcg-header 25.24
+  IMAGE/factory.bin := $$(sysupgrade_bin) | check-size $$$$(IMAGE_SIZE) | \
+	jcg-header 25.24
   DEVICE_VENDOR := JCG
   DEVICE_MODEL := JHR-N926R
   SUPPORTED_DEVICES += jhr-n926r
@@ -701,8 +699,8 @@ define Device/nexx_wt1520-4m
   MTK_SOC := rt5350
   IMAGE_SIZE := 3776k
   IMAGES += factory.bin
-  IMAGE/factory.bin := \
-	$$(sysupgrade_bin) | check-size $$$$(IMAGE_SIZE) | poray-header -B WT1520 -F 4M
+  IMAGE/factory.bin := $$(sysupgrade_bin) | check-size $$$$(IMAGE_SIZE) | \
+	poray-header -B WT1520 -F 4M
   DEVICE_VENDOR := Nexx
   DEVICE_MODEL := WT1520
   DEVICE_VARIANT := 4M
@@ -714,8 +712,8 @@ define Device/nexx_wt1520-8m
   MTK_SOC := rt5350
   IMAGE_SIZE := 7872k
   IMAGES += factory.bin
-  IMAGE/factory.bin := \
-	$$(sysupgrade_bin) | check-size $$$$(IMAGE_SIZE) | poray-header -B WT1520 -F 8M
+  IMAGE/factory.bin := $$(sysupgrade_bin) | check-size $$$$(IMAGE_SIZE) | \
+	poray-header -B WT1520 -F 8M
   DEVICE_VENDOR := Nexx
   DEVICE_MODEL := WT1520
   DEVICE_VARIANT := 8M
@@ -729,7 +727,8 @@ define Device/nixcore_x1-16m
   DEVICE_VENDOR := Nixcore
   DEVICE_MODEL := X1
   DEVICE_VARIANT := 16M
-  DEVICE_PACKAGES := kmod-usb-ohci kmod-usb2 kmod-i2c-core kmod-i2c-ralink kmod-spi-dev
+  DEVICE_PACKAGES := kmod-usb-ohci kmod-usb2 kmod-i2c-core kmod-i2c-ralink \
+	kmod-spi-dev
   SUPPORTED_DEVICES += nixcore-x1 nixcore-x1-16M
 endef
 TARGET_DEVICES += nixcore_x1-16m
@@ -740,7 +739,8 @@ define Device/nixcore_x1-8m
   DEVICE_VENDOR := Nixcore
   DEVICE_MODEL := X1
   DEVICE_VARIANT := 8M
-  DEVICE_PACKAGES := kmod-usb-ohci kmod-usb2 kmod-i2c-core kmod-i2c-ralink kmod-spi-dev
+  DEVICE_PACKAGES := kmod-usb-ohci kmod-usb2 kmod-i2c-core kmod-i2c-ralink \
+	kmod-spi-dev
   SUPPORTED_DEVICES += nixcore-x1 nixcore-x1-8M
 endef
 TARGET_DEVICES += nixcore_x1-8m
@@ -750,9 +750,8 @@ define Device/olimex_rt5350f-olinuxino
   IMAGE_SIZE := 7872k
   DEVICE_VENDOR := OLIMEX
   DEVICE_MODEL := RT5350F-OLinuXino
-  DEVICE_PACKAGES := kmod-usb-ohci kmod-usb2 \
-		kmod-i2c-core kmod-i2c-ralink \
-		kmod-spi-dev
+  DEVICE_PACKAGES := kmod-usb-ohci kmod-usb2 kmod-i2c-core kmod-i2c-ralink \
+	kmod-spi-dev
   SUPPORTED_DEVICES += rt5350f-olinuxino
 endef
 TARGET_DEVICES += olimex_rt5350f-olinuxino
@@ -762,9 +761,8 @@ define Device/olimex_rt5350f-olinuxino-evb
   IMAGE_SIZE := 7872k
   DEVICE_VENDOR := OLIMEX
   DEVICE_MODEL := RT5350F-OLinuXino-EVB
-  DEVICE_PACKAGES := kmod-usb-ohci kmod-usb2 \
-		kmod-i2c-core kmod-i2c-ralink \
-		kmod-spi-dev
+  DEVICE_PACKAGES := kmod-usb-ohci kmod-usb2 kmod-i2c-core kmod-i2c-ralink \
+	kmod-spi-dev
   SUPPORTED_DEVICES += rt5350f-olinuxino-evb
 endef
 TARGET_DEVICES += olimex_rt5350f-olinuxino-evb
@@ -842,12 +840,11 @@ define Device/poray_m3
   MTK_SOC := rt5350
   IMAGE_SIZE := 3776k
   IMAGES += factory.bin
-  IMAGE/factory.bin := \
-	$$(sysupgrade_bin) | check-size $$$$(IMAGE_SIZE) | poray-header -B M3 -F 4M
+  IMAGE/factory.bin := $$(sysupgrade_bin) | check-size $$$$(IMAGE_SIZE) | \
+	poray-header -B M3 -F 4M
   DEVICE_VENDOR := Poray
   DEVICE_MODEL := M3
-  DEVICE_PACKAGES := kmod-usb2 kmod-ledtrig-netdev \
-	kmod-ledtrig-timer
+  DEVICE_PACKAGES := kmod-usb2 kmod-ledtrig-netdev kmod-ledtrig-timer
   SUPPORTED_DEVICES += m3
 endef
 TARGET_DEVICES += poray_m3
@@ -856,13 +853,12 @@ define Device/poray_m4-4m
   MTK_SOC := rt5350
   IMAGE_SIZE := 3776k
   IMAGES += factory.bin
-  IMAGE/factory.bin := \
-	$$(sysupgrade_bin) | check-size $$$$(IMAGE_SIZE) | poray-header -B M4 -F 4M
+  IMAGE/factory.bin := $$(sysupgrade_bin) | check-size $$$$(IMAGE_SIZE) | \
+	poray-header -B M4 -F 4M
   DEVICE_VENDOR := Poray
   DEVICE_MODEL := M4
   DEVICE_VARIANT := 4M
-  DEVICE_PACKAGES := kmod-usb2 kmod-ledtrig-netdev \
-	kmod-ledtrig-timer
+  DEVICE_PACKAGES := kmod-usb2 kmod-ledtrig-netdev kmod-ledtrig-timer
   SUPPORTED_DEVICES += m4-4M
 endef
 TARGET_DEVICES += poray_m4-4m
@@ -871,8 +867,8 @@ define Device/poray_m4-8m
   MTK_SOC := rt5350
   IMAGE_SIZE := 7872k
   IMAGES += factory.bin
-  IMAGE/factory.bin := \
-	$$(sysupgrade_bin) | check-size $$$$(IMAGE_SIZE) | poray-header -B M4 -F 8M
+  IMAGE/factory.bin := $$(sysupgrade_bin) | check-size $$$$(IMAGE_SIZE) | \
+	poray-header -B M4 -F 8M
   DEVICE_VENDOR := Poray
   DEVICE_MODEL := M4
   DEVICE_VARIANT := 8M
@@ -885,8 +881,8 @@ define Device/poray_x5
   MTK_SOC := rt5350
   IMAGE_SIZE := 7872k
   IMAGES += factory.bin
-  IMAGE/factory.bin := \
-	$$(sysupgrade_bin) | check-size $$$$(IMAGE_SIZE) | poray-header -B X5 -F 8M
+  IMAGE/factory.bin := $$(sysupgrade_bin) | check-size $$$$(IMAGE_SIZE) | \
+	poray-header -B X5 -F 8M
   DEVICE_VENDOR := Poray
   DEVICE_MODEL := X5/X6
   DEVICE_PACKAGES := kmod-usb2 kmod-ledtrig-netdev kmod-ledtrig-timer
@@ -898,8 +894,8 @@ define Device/poray_x8
   MTK_SOC := rt5350
   IMAGE_SIZE := 7872k
   IMAGES += factory.bin
-  IMAGE/factory.bin := \
-	$$(sysupgrade_bin) | check-size $$$$(IMAGE_SIZE) | poray-header -B X8 -F 8M
+  IMAGE/factory.bin := $$(sysupgrade_bin) | check-size $$$$(IMAGE_SIZE) | \
+	poray-header -B X8 -F 8M
   DEVICE_VENDOR := Poray
   DEVICE_MODEL := X8
   DEVICE_PACKAGES := kmod-usb2 kmod-ledtrig-netdev kmod-ledtrig-timer
@@ -1017,7 +1013,7 @@ define Device/trendnet_tew-638apb-v2
   BLOCKSIZE := 64k
   IMAGE_SIZE := 3776k
   IMAGE/sysupgrade.bin := $$(sysupgrade_bin) | umedia-header 0x026382 | \
-        append-metadata | check-size $$$$(IMAGE_SIZE)
+	append-metadata | check-size $$$$(IMAGE_SIZE)
   DEVICE_VENDOR := TRENDnet
   DEVICE_MODEL := TEW-638APB
   DEVICE_VARIANT := v2
@@ -1038,8 +1034,8 @@ define Device/unbranded_a5-v11
   MTK_SOC := rt5350
   IMAGE_SIZE := 3776k
   IMAGES += factory.bin
-  IMAGE/factory.bin := \
-	$$(sysupgrade_bin) | check-size $$$$(IMAGE_SIZE) | poray-header -B A5-V11 -F 4M
+  IMAGE/factory.bin := $$(sysupgrade_bin) | check-size $$$$(IMAGE_SIZE) | \
+	poray-header -B A5-V11 -F 4M
   DEVICE_VENDOR := 
   DEVICE_MODEL := A5-V11
   DEVICE_PACKAGES := kmod-usb-ohci kmod-usb2
@@ -1104,9 +1100,8 @@ define Device/vocore_vocore-16m
   DEVICE_VENDOR := VoCore
   DEVICE_MODEL := VoCore
   DEVICE_VARIANT := 16M
-  DEVICE_PACKAGES := kmod-usb-ohci kmod-usb2 \
-		kmod-i2c-core kmod-i2c-ralink \
-		kmod-spi-dev
+  DEVICE_PACKAGES := kmod-usb-ohci kmod-usb2 kmod-i2c-core kmod-i2c-ralink \
+	kmod-spi-dev
   SUPPORTED_DEVICES += vocore vocore-16M
 endef
 TARGET_DEVICES += vocore_vocore-16m
@@ -1117,9 +1112,8 @@ define Device/vocore_vocore-8m
   DEVICE_VENDOR := VoCore
   DEVICE_MODEL := VoCore
   DEVICE_VARIANT := 8M
-  DEVICE_PACKAGES := kmod-usb-ohci kmod-usb2 \
-		kmod-i2c-core kmod-i2c-ralink \
-		kmod-spi-dev
+  DEVICE_PACKAGES := kmod-usb-ohci kmod-usb2 kmod-i2c-core kmod-i2c-ralink \
+	kmod-spi-dev
   SUPPORTED_DEVICES += vocore vocore-8M
 endef
 TARGET_DEVICES += vocore_vocore-8m
@@ -1129,8 +1123,7 @@ define Device/wansview_ncs601w
   IMAGE_SIZE := 7872k
   DEVICE_VENDOR := Wansview
   DEVICE_MODEL := NCS601W
-  DEVICE_PACKAGES := kmod-video-core kmod-video-uvc \
-		kmod-usb-ohci
+  DEVICE_PACKAGES := kmod-video-core kmod-video-uvc kmod-usb-ohci
   SUPPORTED_DEVICES += ncs601w
 endef
 TARGET_DEVICES += wansview_ncs601w