uboot-sunxi: add support for FriendlyARM NanoPi R1S H5

Merged in https://github.com/u-boot/u-boot/commit/e7510d2,
adjust back to the current 2020.04 version.

Signed-off-by: Chukun Pan <[email protected]>

package/boot/uboot-sunxi/Makefile

@@ -270,6 +270,15 @@ define U-Boot/nanopi_neo2
   ATF:=a64
 endef
 
+define U-Boot/nanopi_r1s_h5
+  BUILD_SUBTARGET:=cortexa53
+  NAME:=NanoPi R1S (H5)
+  BUILD_DEVICES:=friendlyarm_nanopi-r1s-h5
+  DEPENDS:=+PACKAGE_u-boot-nanopi_r1s_h5:arm-trusted-firmware-sunxi-a64
+  UENV:=a64
+  ATF:=a64
+endef
+
 define U-Boot/pine64_plus
   BUILD_SUBTARGET:=cortexa53
   NAME:=Pine64 Plus A64
@@ -357,6 +366,7 @@ UBOOT_TARGETS := \
 	nanopi_neo_plus2 \
 	nanopi_neo2 \
 	nanopi_r1 \
+	nanopi_r1s_h5 \
 	orangepi_zero \
 	orangepi_r1 \
 	orangepi_one \

package/boot/uboot-sunxi/patches/253-sunxi-h5-add-support-for-nanopi-r1s-h5.patch

@@ -0,0 +1,271 @@
+From e7510d24cab4741f72489b9d67c2d42b18fe5374 Mon Sep 17 00:00:00 2001
+From: Chukun Pan <[email protected]>
+Date: Sun, 10 Oct 2021 21:36:57 +0800
+Subject: [PATCH] sunxi: Add support for FriendlyARM NanoPi R1S H5
+
+This adds support for the NanoPi R1S H5 board.
+
+Allwinner H5 SoC
+512MB DDR3 RAM
+10/100/1000M Ethernet x 2
+RTL8189ETV WiFi 802.11b/g/n
+USB 2.0 host port (A)
+MicroSD Slot
+Reset button
+Serial Debug Port
+WAN - LAN - SYS LED
+
+Signed-off-by: Chukun Pan <[email protected]>
+---
+ arch/arm/dts/Makefile                    |   1 +
+ arch/arm/dts/sun50i-h5-nanopi-r1s-h5.dts | 195 +++++++++++++++++++++++
+ board/sunxi/MAINTAINERS                  |   5 +
+ configs/nanopi_r1s_h5_defconfig          |  14 ++
+ 4 files changed, 215 insertions(+)
+ create mode 100644 arch/arm/dts/sun50i-h5-nanopi-r1s-h5.dts
+ create mode 100644 configs/nanopi_r1s_h5_defconfig
+
+diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
+index b8a382d1539..ed3d360bb10 100644
+--- a/arch/arm/dts/Makefile
++++ b/arch/arm/dts/Makefile
+@@ -638,6 +638,7 @@ dtb-$(CONFIG_MACH_SUN50I_H5) += \
+ 	sun50i-h5-libretech-all-h5-cc.dtb \
+ 	sun50i-h5-nanopi-neo2.dtb \
+ 	sun50i-h5-nanopi-neo-plus2.dtb \
++	sun50i-h5-nanopi-r1s-h5.dtb \
+ 	sun50i-h5-orangepi-zero-plus.dtb \
+ 	sun50i-h5-orangepi-pc2.dtb \
+ 	sun50i-h5-orangepi-prime.dtb \
+diff --git a/arch/arm/dts/sun50i-h5-nanopi-r1s-h5.dts b/arch/arm/dts/sun50i-h5-nanopi-r1s-h5.dts
+new file mode 100644
+index 00000000000..55bcdf8d1a0
+--- /dev/null
++++ b/arch/arm/dts/sun50i-h5-nanopi-r1s-h5.dts
+@@ -0,0 +1,190 @@
++// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
++/*
++ * Copyright (C) 2021 Chukun Pan <[email protected]>
++ *
++ * Based on sun50i-h5-nanopi-neo-plus2.dts, which is:
++ *   Copyright (C) 2017 Antony Antony <[email protected]>
++ *   Copyright (C) 2016 ARM Ltd.
++ */
++
++/dts-v1/;
++#include "sun50i-h5.dtsi"
++
++#include <dt-bindings/gpio/gpio.h>
++#include <dt-bindings/input/input.h>
++
++/ {
++	model = "FriendlyARM NanoPi R1S H5";
++	compatible = "friendlyarm,nanopi-r1s-h5", "allwinner,sun50i-h5";
++
++	aliases {
++		ethernet0 = &emac;
++		ethernet1 = &rtl8189etv;
++		serial0 = &uart0;
++	};
++
++	chosen {
++		stdout-path = "serial0:115200n8";
++	};
++
++	leds {
++		compatible = "gpio-leds";
++
++		sys {
++			label = "nanopi:red:sys";
++			gpios = <&pio 0 10 GPIO_ACTIVE_HIGH>;
++			linux,default-trigger = "heartbeat";
++		};
++
++		lan {
++			label = "nanopi:green:lan";
++			gpios = <&pio 0 9 GPIO_ACTIVE_HIGH>;
++		};
++
++		wan {
++			label = "nanopi:green:wan";
++			gpios = <&pio 6 11 GPIO_ACTIVE_HIGH>;
++		};
++	};
++
++	r-gpio-keys {
++		compatible = "gpio-keys";
++
++		reset {
++			label = "reset";
++			linux,code = <KEY_RESTART>;
++			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
++		};
++	};
++
++	reg_gmac_3v3: gmac-3v3 {
++		compatible = "regulator-fixed";
++		regulator-name = "gmac-3v3";
++		regulator-min-microvolt = <3300000>;
++		regulator-max-microvolt = <3300000>;
++		startup-delay-us = <100000>;
++		enable-active-high;
++		gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>;
++	};
++
++	reg_vcc3v3: vcc3v3 {
++		compatible = "regulator-fixed";
++		regulator-name = "vcc3v3";
++		regulator-min-microvolt = <3300000>;
++		regulator-max-microvolt = <3300000>;
++	};
++
++	reg_usb0_vbus: usb0-vbus {
++		compatible = "regulator-fixed";
++		regulator-name = "usb0-vbus";
++		regulator-min-microvolt = <5000000>;
++		regulator-max-microvolt = <5000000>;
++		enable-active-high;
++		gpio = <&r_pio 0 2 GPIO_ACTIVE_HIGH>; /* PL2 */
++		status = "okay";
++	};
++
++	vdd_cpux: gpio-regulator {
++		compatible = "regulator-gpio";
++		regulator-name = "vdd-cpux";
++		regulator-type = "voltage";
++		regulator-boot-on;
++		regulator-always-on;
++		regulator-min-microvolt = <1100000>;
++		regulator-max-microvolt = <1300000>;
++		regulator-ramp-delay = <50>; /* 4ms */
++		gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>;
++		gpios-states = <0x1>;
++		states = <1100000 0x0>, <1300000 0x1>;
++	};
++
++	wifi_pwrseq: wifi_pwrseq {
++		compatible = "mmc-pwrseq-simple";
++		reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
++		post-power-on-delay-ms = <200>;
++	};
++};
++
++&cpu0 {
++	cpu-supply = <&vdd_cpux>;
++};
++
++&ehci1 {
++	status = "okay";
++};
++
++&ehci2 {
++	status = "okay";
++};
++
++&emac {
++	pinctrl-names = "default";
++	pinctrl-0 = <&emac_rgmii_pins>;
++	phy-supply = <&reg_gmac_3v3>;
++	phy-handle = <&ext_rgmii_phy>;
++	phy-mode = "rgmii-id";
++	status = "okay";
++};
++
++&external_mdio {
++	ext_rgmii_phy: ethernet-phy@7 {
++		compatible = "ethernet-phy-ieee802.3-c22";
++		reg = <7>;
++	};
++};
++
++&i2c0 {
++	status = "okay";
++
++	eeprom@51 {
++		compatible = "microchip,24c02";
++		reg = <0x51>;
++		pagesize = <16>;
++	};
++};
++
++&mmc0 {
++	vmmc-supply = <&reg_vcc3v3>;
++	bus-width = <4>;
++	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
++	status = "okay";
++};
++
++&mmc1 {
++	vmmc-supply = <&reg_vcc3v3>;
++	vqmmc-supply = <&reg_vcc3v3>;
++	mmc-pwrseq = <&wifi_pwrseq>;
++	bus-width = <4>;
++	non-removable;
++	status = "okay";
++
++	rtl8189etv: sdio_wifi@1 {
++		reg = <1>;
++	};
++};
++
++&ohci1 {
++	status = "okay";
++};
++
++&ohci2 {
++	status = "okay";
++};
++
++&uart0 {
++	pinctrl-names = "default";
++	pinctrl-0 = <&uart0_pa_pins>;
++	status = "okay";
++};
++
++&usb_otg {
++	dr_mode = "peripheral";
++	status = "okay";
++};
++
++&usbphy {
++	/* USB Type-A port's VBUS is always on */
++	usb0_id_det-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
++	usb0_vbus-supply = <&reg_usb0_vbus>;
++	status = "okay";
++};
+diff --git a/board/sunxi/MAINTAINERS b/board/sunxi/MAINTAINERS
+index 2543c94de79..56a0ee3689b 100644
+--- a/board/sunxi/MAINTAINERS
++++ b/board/sunxi/MAINTAINERS
+@@ -358,6 +358,11 @@ M:	Jelle van der Waa <[email protected]>
+ S:	Maintained
+ F:	configs/nanopi_neo_air_defconfig
+ 
++NANOPI-R1S-H5 BOARD
++M:	Chukun Pan <[email protected]>
++S:	Maintained
++F:	configs/nanopi_r1s_h5_defconfig
++
+ NANOPI-A64 BOARD
+ M:	Jagan Teki <[email protected]>
+ S:	Maintained
+diff --git a/configs/nanopi_r1s_h5_defconfig b/configs/nanopi_r1s_h5_defconfig
+new file mode 100644
+index 00000000000..27cf172d72a
+--- /dev/null
++++ b/configs/nanopi_r1s_h5_defconfig
+@@ -0,0 +1,14 @@
++CONFIG_ARM=y
++CONFIG_ARCH_SUNXI=y
++CONFIG_SPL=y
++CONFIG_MACH_SUN50I_H5=y
++CONFIG_DRAM_CLK=672
++CONFIG_DRAM_ZQ=3881977
++# CONFIG_DRAM_ODT_EN is not set
++CONFIG_MACPWR="PD6"
++CONFIG_MMC_SUNXI_SLOT_EXTRA=2
++# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
++CONFIG_DEFAULT_DEVICE_TREE="sun50i-h5-nanopi-r1s-h5"
++CONFIG_SUN8I_EMAC=y
++CONFIG_USB_EHCI_HCD=y
++CONFIG_USB_OHCI_HCD=y