ramips: fix Buffalo WMR-300 dts, board, image and profile names

The following patch changes Buffalo WMR-300 dts filename, board, image and profile names from "WMR300" to "WMR-300" (for consistency).

Signed-off-by: Piotr Dymacz <[email protected]>

SVN-Revision: 46628

target/linux/ramips/base-files/etc/board.d/02_network

@@ -77,7 +77,7 @@ ramips_setup_interfaces()
 
 	wizard8800 | \
 	wl-330n | \
-	wmr300)
+	wmr-300)
 		ucidef_set_interface_lan "eth0.1"
 		;;
 

target/linux/ramips/base-files/etc/diag.sh

@@ -183,8 +183,8 @@ get_status_led() {
 	whr-g300n)
 		status_led="whr-g300n:green:router"
 		;;
-	wmr300)
-		status_led="buffalo:green:status"
+	wmr-300)
+		status_led="wmr-300:green:status"
 		;;
 	wli-tx4-ag300n)
 		status_led="buffalo:blue:power"

target/linux/ramips/base-files/lib/ramips.sh

@@ -320,7 +320,7 @@ ramips_board_detect() {
 		name="w502u"
 		;;
 	*"WMR-300")
-		name="wmr300"
+		name="wmr-300"
 		;;
 	*"WHR-300HP2")
 		name="whr-300hp2"

target/linux/ramips/base-files/lib/upgrade/platform.sh

@@ -112,7 +112,7 @@ platform_check_image() {
 	wl-341v3 | \
 	wli-tx4-ag300n | \
 	wzr-agl300nh | \
-	wmr300 |\
+	wmr-300 |\
 	wnce2001 | \
 	wr512-3gn |\
 	wr6202 |\

target/linux/ramips/dts/WMR300.dts → target/linux/ramips/dts/WMR-300.dts

@@ -70,17 +70,17 @@
 		compatible = "gpio-leds";
 
 		aoss1 {
-			label = "buffalo:red:aoss";
+			label = "wmr-300:red:aoss";
 			gpios = <&gpio2 1 1>;
 		};
 
 		aoss2 {
-			label = "buffalo:green:aoss";
+			label = "wmr-300:green:aoss";
 			gpios = <&gpio2 2 1>;
 		};
 
 		power {
-			label = "buffalo:green:status";
+			label = "wmr-300:green:status";
 			gpios = <&gpio2 4 1>;
 		};
 	};

target/linux/ramips/image/Makefile

@@ -874,7 +874,7 @@ Image/Build/Profile/Y1=$(call BuildFirmware/Default16M/$(1),$(1),y1,Y1)
 Image/Build/Profile/Y1S=$(call BuildFirmware/Default16M/$(1),$(1),y1s,Y1S)
 Image/Build/Profile/MLW221=$(call BuildFirmware/Default16M/$(1),$(1),mlw221,MLW221)
 Image/Build/Profile/MLWG2=$(call BuildFirmware/Default16M/$(1),$(1),mlwg2,MLWG2)
-Image/Build/Profile/WMR300=$(call BuildFirmware/Default8M/$(1),$(1),wmr-300,WMR300)
+Image/Build/Profile/WMR-300=$(call BuildFirmware/Default8M/$(1),$(1),wmr-300,WMR-300)
 Image/Build/Profile/RT-N14U=$(call BuildFirmware/Default8M/$(1),$(1),rt-n14u,RT-N14U)
 Image/Build/Profile/WRTNODE=$(call BuildFirmware/Default16M/$(1),$(1),wrtnode,WRTNODE)
 Image/Build/Profile/WT3020=$(call BuildFirmware/PorayDualSize/$(1),$(1),wt3020,WT3020)
@@ -908,7 +908,7 @@ define Image/Build/Profile/Default
 	$(call Image/Build/Profile/Y1S,$(1))
 	$(call Image/Build/Profile/MLW221,$(1))
 	$(call Image/Build/Profile/MLWG2,$(1))
-	$(call Image/Build/Profile/WMR300,$(1))
+	$(call Image/Build/Profile/WMR-300,$(1))
 	$(call Image/Build/Profile/RT-N14U,$(1))
 	$(call Image/Build/Profile/WRTNODE,$(1))
 	$(call Image/Build/Profile/WT3020,$(1))