treewide: use only board_name function to get name

Do not parse /tmp/sysinfo/board_name, /proc/cpuinfo or the device tree
compatible string directly. Always use the board_name function to get
the board name.

The admswconfig package still reads /proc/cpuinfo directly. The code
looks somehow broken and the whole adm5120 which uses this package
looks unmaintained. Leave it as it is for now.

Signed-off-by: Mathias Kresin <[email protected]>

target/linux/apm821xx/base-files/lib/preinit/79_move_config

@@ -3,7 +3,9 @@
 BOOTPART=/dev/sda1
 
 move_config() {
-	grep -q 'MyBook Live' /proc/cpuinfo || return
+	. /lib/functions.sh
+
+	[ "$(board_name)" = "mbl" ] || return
 	if [ -b $BOOTPART ]; then
 		mkdir -p /boot
 		mount -t ext4 -o rw,noatime $BOOTPART /boot

target/linux/apm821xx/base-files/lib/upgrade/merakinand.sh

@@ -52,7 +52,7 @@ merakinand_do_platform_check() {
 
 merakinand_do_upgrade() {
 	local tar_file="$1"
-	local board_name="$(cat /tmp/sysinfo/board_name)"
+	local board_name="$(board_name)"
 
 	# Do we need to do any platform tweaks?
 	case "$board_name" in

target/linux/ar71xx/base-files/lib/upgrade/merakinand.sh

@@ -51,7 +51,7 @@ merakinand_copy_caldata() {
 	local cal_src=$1
 	local cal_dst=$2
 	local ubidev="$(nand_find_ubi $CI_UBIPART)"
-	local board_name="$(cat /tmp/sysinfo/board_name)"
+	local board_name="$(board_name)"
 	local rootfs_size="$(ubinfo /dev/ubi0 -N rootfs_data | grep "Size" | awk '{ print $6 }')"
 
 	# Setup partitions using board name, in case of future platforms
@@ -143,7 +143,7 @@ merakinand_do_platform_check() {
 
 merakinand_do_upgrade() {
 	local tar_file="$1"
-	local board_name="$(cat /tmp/sysinfo/board_name)"
+	local board_name="$(board_name)"
 
 	# Do we need to do any platform tweaks?
 	case "$board_name" in

target/linux/bcm53xx/base-files/etc/board.d/01_leds

@@ -4,9 +4,7 @@
 
 board_config_update
 
-board=$(cat /proc/device-tree/compatible | tr '\0' '\t' | cut -f 1)
-
-case "$board" in
+case "$(board_name)" in
 netgear,r8000)
 	ucidef_set_led_usbport "usb2" "USB 2.0" "bcm53xx:white:usb2" "usb1-port2" "usb2-port2"
 	ucidef_set_led_usbport "usb3" "USB 3.0" "bcm53xx:white:usb3" "usb1-port1" "usb2-port1" "usb4-port1"

target/linux/bcm53xx/base-files/etc/board.d/02_network

@@ -8,7 +8,7 @@
 
 board_config_update
 
-board=$(cat /proc/device-tree/compatible | tr '\0' '\t' | cut -f 1)
+board=$(board_name)
 
 case "$board" in
 tenda,ac9)

target/linux/brcm47xx/base-files/etc/board.d/01_detect

@@ -175,7 +175,7 @@ detect_by_model() {
 }
 
 
-model="$(sed -ne 's/^machine[ \t]*: //p' /proc/cpuinfo)"
+model="$(board_name)"
 boardtype="$(nvram get boardtype)"
 boardnum="$(nvram get boardnum)"
 

target/linux/ipq806x/base-files/lib/upgrade/zyxel.sh

@@ -68,7 +68,7 @@ zyxel_do_flash() {
 
 zyxel_do_upgrade() {
 	local tar_file="$1"
-	local board=$(cat /tmp/sysinfo/board_name)
+	local board=$(board_name)
 	local rootfs="$(zyxel_get_rootfs)"
 	local kernel=
 

target/linux/mediatek/base-files/lib/upgrade/platform.sh

@@ -4,7 +4,7 @@
 
 platform_do_upgrade() {
 	local tar_file="$1"
-	local board="$(cat /tmp/sysinfo/board_name)"
+	local board="$(board_name)"
 
 	echo "flashing kernel"
 	tar xf $tar_file sysupgrade-$board/kernel -O | mtd write - kernel
@@ -17,7 +17,7 @@ platform_do_upgrade() {
 
 platform_check_image() {
 	local tar_file="$1"
-	local board=$(cat /tmp/sysinfo/board_name)
+	local board=$(board_name)
 
 	case "$board" in
 	mediatek,mt7623-rfb-nand-ephy |\
@@ -45,8 +45,7 @@ platform_check_image() {
 }
 
 platform_pre_upgrade() {
-	local board=$(cat /tmp/sysinfo/board_name)
-	case "$board" in
+	case "$(board_name)" in
 	mediatek,mt7623-rfb-nand-ephy |\
 	mediatek,mt7623-rfb-nand)
 		nand_do_upgrade $1

target/linux/octeon/base-files/etc/board.d/01_network

@@ -7,7 +7,7 @@
 
 board_config_update
 
-case "$(cat /tmp/sysinfo/board_name)" in
+case "$(board_name)" in
 erlite)
 	ucidef_set_interfaces_lan_wan "eth0" "eth1"
 	;;

target/linux/octeon/base-files/lib/preinit/79_move_config

@@ -2,7 +2,9 @@
 # Copyright (C) 2014 OpenWrt.org
 
 move_config() {
-	case "$(cat /tmp/sysinfo/board_name)" in
+	. /lib/functions.sh
+
+	case "$(board_name)" in
 		erlite)
 			mount -t vfat /dev/sda1 /mnt
 			[ -f /mnt/sysupgrade.tgz ] && mv -f /mnt/sysupgrade.tgz /

target/linux/octeon/base-files/lib/upgrade/platform.sh

@@ -22,9 +22,7 @@ platform_get_rootfs() {
 }
 
 platform_copy_config() {
-	local board="$(cat /tmp/sysinfo/board_name)"
-
-	case "$board" in
+	case "$(board_name)" in
 	erlite)
 		mount -t vfat /dev/sda1 /mnt
 		cp -af "$CONF_TAR" /mnt/
@@ -58,7 +56,7 @@ platform_do_flash() {
 
 platform_do_upgrade() {
 	local tar_file="$1"
-	local board=$(cat /tmp/sysinfo/board_name)
+	local board=$(board_name)
 	local rootfs="$(platform_get_rootfs)"
 	local kernel=
 
@@ -81,7 +79,7 @@ platform_do_upgrade() {
 }
 
 platform_check_image() {
-	local board=$(cat /tmp/sysinfo/board_name)
+	local board=$(board_name)
 
 	case "$board" in
 	erlite | \

target/linux/omap24xx/base-files/etc/hotplug.d/firmware/10-bme-pmm-image

@@ -7,8 +7,10 @@ n810_cal_bme_pmm_extract() {
 	}
 }
 
+. /lib/functions.sh
+
 [ "$FIRMWARE" = "n810-cal-bme-pmm.fw" ] && {
-	[ -z "$(grep -e 'Nokia N810' /proc/cpuinfo)" ] || {
+	[ "$(board_name)" != "nokia,n810" ] || {
 		[ -e /lib/firmware/n810-cal-bme-pmm.fw ] ||\
 			n810_cal_bme_pmm_extract
 	}

target/linux/omap24xx/base-files/etc/hotplug.d/firmware/20-p54spi-eeprom

@@ -22,8 +22,10 @@ p54spi_eeprom_extract() {
 	}
 }
 
+. /lib/functions.sh
+
 [ "$FIRMWARE" = "3826.eeprom" ] && {
-	[ -z "$(grep -e 'Nokia N810' /proc/cpuinfo)" ] || {
+	[ "$(board_name)" != "nokia,n810" ] || {
 		[ -e /lib/firmware/3826.eeprom ] ||\
 			p54spi_eeprom_extract
 	}

target/linux/orion/base-files/etc/hotplug.d/usb/10-usb

@@ -30,9 +30,9 @@ usb_led_off() {
 }
 
 get_usb_led() {
-	local hardware=`sed -n /Hardware/s/.*:.//p /proc/cpuinfo`
+	. /lib/functions.sh
 
-	case "${hardware}" in
+	case "$(board_name)" in
 	 'Linksys WRT350N v2')
 		usb_led='wrt350nv2:green:usb'
 		usb_device='1-1:1.0'

target/linux/orion/generic/base-files/etc/uci-defaults/09_hardware

@@ -10,7 +10,7 @@
 # This script sets system defaults for the hardware on firstboot
 #
 
-hardware=`sed -n /Hardware/s/.*:.//p /proc/cpuinfo`
+. /lib/functions.sh
 
 wrt350nv2_default() {
 # leds
@@ -47,7 +47,7 @@ __EOF
 	}
 }
 
-case "${hardware}" in
+case "$(board_name)" in
  'Linksys WRT350N v2')
 	wrt350nv2_default
 	;;

target/linux/orion/generic/base-files/lib/upgrade/platform.sh

@@ -8,7 +8,7 @@
 platform_check_image() {
 	[ "${ARGC}" -gt 1 ] && { echo 'Too many arguments. Only flash file expected.'; return 1; }
 
-	local hardware=`sed -n /Hardware/s/.*:.//p /proc/cpuinfo`
+	local hardware="$(board_name)"
 	local magic="$(get_magic_word "$1")"
 	local magic_long="$(get_magic_long "$1")"
 

target/linux/rb532/base-files/lib/upgrade/platform.sh

@@ -15,10 +15,8 @@ platform_pre_upgrade() {
 }
 
 platform_nand_pre_upgrade() {
-	local board_name="$(cat /tmp/sysinfo/board_name)"
-
 	mtd erase kernel
-	tar xf "$1" sysupgrade-$board_name/kernel -O | nandwrite -o /dev/mtd0 -
+	tar xf "$1" "sysupgrade-$(board_name)/kernel" -O | nandwrite -o /dev/mtd0 -
 }
 
 platform_do_upgrade() {

target/linux/x86/base-files/etc/board.d/01_leds

@@ -7,9 +7,7 @@
 
 board_config_update
 
-board=$(cat /tmp/sysinfo/board_name) 2>/dev/null
-
-case "$board" in
+case "$(board_name)" in
 pc-engines-apu|pc-engines-apu2)
 	ucidef_set_led_netdev "wan" "WAN" "apu2:green:led3" "eth0"
 	ucidef_set_led_netdev "lan" "LAN" "apu2:green:led2" "br-lan"

target/linux/x86/base-files/etc/board.d/02_network

@@ -8,9 +8,7 @@
 
 board_config_update
 
-board="$(cat /tmp/sysinfo/board_name)" 2>/dev/null
-
-case "$board" in
+case "$(board_name)" in
 pc-engines-apu|pc-engines-apu2)
 	ucidef_set_interfaces_lan_wan "eth1 eth2" "eth0"
 	;;

target/linux/zynq/base-files/etc/board.d/02_network

@@ -5,7 +5,7 @@
 
 board_config_update
 
-case "$(cat /tmp/sysinfo/board_name)" in
+case "$(board_name)" in
 	xlnx,zynq-zc702|xlnx,zynq-zed|xlnx,zynq-zybo)
 		ucidef_set_interface_lan 'eth0'
 		;;