qualcommax: apply special PHY LEDs configuration for Xiaomi AX9000

Xiaomi AX9000 apply a special PHY LEDs configuration where the unique
green LED for each qca807x PHY port is turned on also on 1000Mbps link.

Apply this special configuration to reflect original implementation.

Signed-off-by: Christian Marangi <[email protected]>

target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8072-ax9000.dts

@@ -358,21 +358,69 @@
 		qca8075_0: ethernet-phy@0 {
 			compatible = "ethernet-phy-ieee802.3-c22";
 			reg = <0>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					color = <LED_COLOR_ID_GREEN>;
+					function = LED_FUNCTION_LAN;
+					default-state = "keep";
+				};
+			};
 		};
 
 		qca8075_1: ethernet-phy@1 {
 			compatible = "ethernet-phy-ieee802.3-c22";
 			reg = <1>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					color = <LED_COLOR_ID_GREEN>;
+					function = LED_FUNCTION_LAN;
+					default-state = "keep";
+				};
+			};
 		};
 
 		qca8075_2: ethernet-phy@2 {
 			compatible = "ethernet-phy-ieee802.3-c22";
 			reg = <2>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					color = <LED_COLOR_ID_GREEN>;
+					function = LED_FUNCTION_LAN;
+					default-state = "keep";
+				};
+			};
 		};
 
 		qca8075_3: ethernet-phy@3 {
 			compatible = "ethernet-phy-ieee802.3-c22";
 			reg = <3>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					color = <LED_COLOR_ID_GREEN>;
+					function = LED_FUNCTION_LAN;
+					default-state = "keep";
+				};
+			};
 		};
 	};
 

target/linux/qualcommax/ipq807x/base-files/etc/board.d/01_leds

@@ -44,6 +44,10 @@ xiaomi,ax3600)
 	;;
 xiaomi,ax9000)
 	ucidef_set_led_netdev "wan-port-link" "WAN-PORT-LINK" "90000.mdio-1:18:green:wan" "wan" "tx rx link_10 link_100 link_1000 link_2500"
+	ucidef_set_led_netdev "lan1-port-link" "LAN1-PORT-LINK" "90000.mdio-1:03:green:lan" "lan1" "tx rx link_10 link_100 link_1000"
+	ucidef_set_led_netdev "lan2-port-link" "LAN2-PORT-LINK" "90000.mdio-1:02:green:lan" "lan2" "tx rx link_10 link_100 link_1000"
+	ucidef_set_led_netdev "lan3-port-link" "LAN3-PORT-LINK" "90000.mdio-1:01:green:lan" "lan3" "tx rx link_10 link_100 link_1000"
+	ucidef_set_led_netdev "lan4-port-link" "LAN4-PORT-LINK" "90000.mdio-1:00:green:lan" "lan4" "tx rx link_10 link_100 link_1000"
 	;;
 qnap,301w)
 	ucidef_set_led_netdev "lan1" "LAN1" "green:lan1" "lan1"